URL
https://opencores.org/ocsvn/ft816float/ft816float/trunk
Subversion Repositories ft816float
[/] [ft816float/] [trunk/] [rtl/] [verilog/] [F80ToF32.v] - Rev 53
Go to most recent revision | Compare with Previous | Blame | View Log
`timescale 1ns / 1ps // ============================================================================ // __ // \\__/ o\ (C) 2006-2019 Robert Finch, Waterloo // \ __ / All rights reserved. // \/_// robfinch<remove>@finitron.ca // || // // // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This source file is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // // ============================================================================ module F80ToF32(a, o); input [79:0] a; output [31:0] o; reg signo; reg [7:0] expo; reg [22:0] mano; assign o = {signo,expo,mano}; wire signi; wire [14:0] expi; wire [63:0] mani; wire xinf; // exponent infinite wire vz; // value zero wire xz; // exponent zero fpDecomp #(80) u1 (.i(a), .sgn(signi), .exp(expi), .man(mani), .xinf(xinf), .xz(xz), .vz(vz) ); always @* begin // sign out always just = sign in signo = signi; // special check for zero if (vz) begin expo <= 0; mano <= 0; end // convert infinity / nan // infinity in = infinity out else if (xinf) begin expo <= 8'h7f; mano <= mani[63:41]; end // convert denormal // a denormal was really a number with an exponent of -126 // this value is easily represented in the double format // it may be possible to normalize the value if it isn't // zero else if (xz) begin expo <= 8'h00; mano <= 23'h0; end // convert typical number // adjust exponent, copy mantissa else begin if (expi < 15'h3fff - 8'h7f) begin expo <= 8'h00; // zero mano <= 23'h0; end else if (expi > 15'h3fff + 8'h7f) begin expo <= 8'hFF; // Infinity mano <= 23'h0; end else begin expo <= expi - 15'h3fff + 8'h7f; mano <= mani[63:41]; end end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log