URL
https://opencores.org/ocsvn/ft816float/ft816float/trunk
Subversion Repositories ft816float
[/] [ft816float/] [trunk/] [rtl/] [verilog2/] [df128Toi.sv] - Rev 85
Go to most recent revision | Compare with Previous | Blame | View Log
// ============================================================================
// __
// \\__/ o\ (C) 2022 Robert Finch, Waterloo
// \ __ / All rights reserved.
// \/_// robfinch<remove>@finitron.ca
// ||
//
// df128Toi.sv
// - convert decimal floating point to integer
//
// BSD 3-Clause License
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this
// list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// ============================================================================
import DFPPkg::*;
module df128Toi (rst, clk, ce, ld, op, i, o, overflow, done);
input rst;
input clk;
input ce;
input ld;
input op; // 1 = signed, 0 = unsigned
input [127:0] i; // float input
output [127:0] o; // integer output
output overflow;
output done;
wire done1;
reg done2;
assign done = done1 & done2;
wire [127:0] sig;
DFP128U ui;
DFPUnpack128 uunpk1 (i, ui);
wire [127:0] maxInt = op ? {1'd0,{127{1'b1}}} : {128{1'b1}}; // maximum integer value
wire [13:0] zeroXp = 14'h17FF;
reg sgn; // sign
always @(posedge clk)
if (ce) sgn = ui.sign;
wire [13:0] exp = ui.exp; // exponent
wire iz = i[126:0]==0; // zero value (special)
wire [14:0] ovx = exp - zeroXp;
assign overflow = ovx > 32 && !ovx[14]; // lots of numbers are too big - don't forget one less bit is available due to signed values
wire underflow = exp < zeroXp - 2'd1; // value less than 1/2
wire [7:0] shamt = 8'd172 - {(exp - zeroXp),2'd0}; // exp - zeroXp will be <= MSB
wire [176:0] o1 = {ui.sig,41'b0} >> shamt; // keep an extra bit for rounding
wire [127:0] o2; // round up
reg [127:0] o3;
DDBCDToBin ub2b1
(
.rst(rst),
.clk(clk),
.ld(ld),
.bcd({o1[172:1]+o1[0]}),
.bin(o2),
.done(done1)
);
always @(posedge clk)
if (ce) begin
if (underflow|iz)
o3 <= 0;
else if (overflow)
o3 <= maxInt;
// value between 1/2 and 1 - round up
else if (exp==zeroXp-1)
o3 <= 128'd1;
// value > 1
else
o3 <= o2;
end
always @(posedge clk)
if (ce) done2 <= done1;
assign o = (op & sgn) ? -o3 : o3; // adjust output for correct signed value
endmodule
Go to most recent revision | Compare with Previous | Blame | View Log