URL
https://opencores.org/ocsvn/ft816float/ft816float/trunk
Subversion Repositories ft816float
[/] [ft816float/] [trunk/] [rtl/] [verilog2/] [dfdiv2.sv] - Rev 89
Go to most recent revision | Compare with Previous | Blame | View Log
// ============================================================================
// __
// \\__/ o\ (C) 2006-2022 Robert Finch, Waterloo
// \ __ / All rights reserved.
// \/_// robfinch<remove>@finitron.ca
// ||
//
// dfdiv2.v
// Decimal Float divider primitive
//
// BSD 3-Clause License
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this
// list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// ============================================================================
module dfdiv2(clk, ld, a, b, q, r, done, lzcnt);
parameter N=33;
localparam FPWID = N*4;
parameter RADIX = 10;
localparam FPWID1 = FPWID;//((FPWID+2)/3)*3; // make FPWIDth a multiple of three
localparam DMSB = FPWID1-1;
input clk;
input ld;
input [FPWID-1:0] a;
input [FPWID-1:0] b;
output reg [FPWID*2-1:0] q;
output reg [FPWID-1:0] r;
output reg done;
output reg [7:0] lzcnt; // Leading zero digit count
reg [2:0] st;
parameter IDLE = 3'd0;
parameter DDIN1 = 3'd1;
parameter DDIN2 = 3'd2;
parameter CALC = 3'd3;
parameter DDO = 3'd4;
parameter DONE = 3'd5;
parameter DDIN3 = 3'd6;
reg rstdd;
reg ldddi,lddiv,ldddo;
reg [1:0] ddidone,ddodone;
wire ddadone,ddbdone,divdone,ddoqdone,ddordone;
wire [N*4-1:0] dda, ddb;
wire [N*4*2-1:0] qdiv;
wire [N*4-1:0] rdiv;
wire [N*4*2-1:0] qo,qo1;
wire [N*4-1:0] ro;
DDBCDToBin #(.WID(N*4)) uddi1
(
.rst(rstdd),
.clk(clk),
.ld(ldddi),
.bcd(a),
.bin(dda),
.done(ddadone)
);
DDBCDToBin #(.WID(N*4)) uddi2
(
.rst(rstdd),
.clk(clk),
.ld(ldddi),
.bcd(b),
.bin(ddb),
.done(ddbdone)
);
fpdivr2 #(.FPWID(N*4)) udiv1
(
.clk_div(clk),
.ld(lddiv),
.a({{N*4{1'b0}},dda}),
.b({{N{1'b0}},ddb}),
.q(qdiv),
.r(rdiv),
.done(divdone),
.lzcnt()
);
DDBinToBCDFract #(.WID(N*4)) udd3
(
.rst(rstdd),
.clk(clk),
.ld(ldddo),
.bin({qdiv[N*4-1:0],4'h0}),
.bcd(qo1),
.done(ddoqdone)
);
assign qo = {qdiv[N*4+3:N*4],qo1[N*4-1:4]};
DDBinToBCDFract #(.WID(N*4)) udd4
(
.rst(rstdd),
.clk(clk),
.ld(ldddo),
.bin(rdiv),
.bcd(ro),
.done(ddordone)
);
reg nz;
reg [N-1:0] zc;
genvar g;
generate begin : glzcnt
for (g = N-1; g >= 0; g = g - 1)
always_comb
zc[g] = qo[g*4+3+N*4:g*4+N*4]==0;
end
endgenerate
integer n;
always_comb
begin
nz = 1'b0;
lzcnt = 'd0;
for (n = N-1; n >= 0; n = n - 1)
begin
nz = nz | ~zc[n];
if (!nz)
lzcnt = lzcnt + 1;
end
end
always_comb
lddiv <= ddidone==2'b11 && st==DDIN3;
always_comb
ldddo <= divdone==1'b1 && st==CALC;
always_ff @(posedge clk)
begin
rstdd <= 1'b0;
ldddi <= 1'b0;
case(st)
IDLE: ;
DDIN1:
begin
ldddi <= 1'b1;
st <= DDIN2;
end
DDIN2:
st <= DDIN3;
DDIN3:
begin
if (ddadone) ddidone <= ddidone | {ddbdone,ddadone};
if (ddidone==2'b11)
st <= CALC;
end
CALC:
if (divdone)
st <= DDO;
DDO:
begin
if (ddoqdone) ddodone <= ddodone | {ddordone,ddoqdone};
q <= qo;
r <= ro;
if (ddodone==2'b11)
st <= DONE;
end
DONE:
begin
done <= 1'b1;
end
default:
st <= IDLE;
endcase
if (ld) begin
done <= 1'b0;
rstdd <= 1'b1;
ddidone <= 'd0;
ddodone <= 'd0;
st <= DDIN1;
end
end
endmodule
module dfdiv2_tb();
reg clk;
reg ld;
reg [135:0] a, b;
wire [271:0] q;
wire [135:0] r;
wire [7:0] lzcnt;
initial begin
clk = 1'b0;
ld = 1'b0;
a = 136'h99_99999999_00000000_00000000_00000000;
b = 136'h50_00000000_00000000_00000000_00000000;
#20 ld = 1'b1;
#40 ld = 1'b0;
end
always #5 clk = ~clk;
dfdiv2 #(.N(34)) u1 (
.clk(clk),
.ld(ld),
.a(a),
.b(b),
.q(q),
.r(r),
.done(done),
.lzcnt(lzcnt)
);
endmodule
Go to most recent revision | Compare with Previous | Blame | View Log