URL
https://opencores.org/ocsvn/ft816float/ft816float/trunk
Subversion Repositories ft816float
[/] [ft816float/] [trunk/] [test_bench/] [DFPMultiply128_tb.v] - Rev 69
Go to most recent revision | Compare with Previous | Blame | View Log
`timescale 1ns / 1ps // ============================================================================ // __ // \\__/ o\ (C) 2006-2022 Robert Finch, Waterloo // \ __ / All rights reserved. // \/_// robfinch<remove>@finitron.ca // || // // DFPMultiply128_tb.v // - decimal floating point multiplier test bench // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This source file is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // // Floating Point Multiplier / Divider // // This multiplier/divider handles denormalized numbers. // The output format is of an internal expanded representation // in preparation to be fed into a normalization unit, then // rounding. Basically, it's the same as the regular format // except the mantissa is doubled in size, the leading two // bits of which are assumed to be whole bits. // // // ============================================================================ module DFPMultiply128_tb(); parameter N=33; reg rst; reg clk; reg [15:0] adr; reg [127:0] a,b; wire [127:0] o; reg [3:0] rm; integer n; reg [127:0] a1, b1; wire done; reg ld; integer outfile; initial begin rst = 1'b0; clk = 1'b0; adr = 0; a = $urandom(1); #20 rst = 1; #50 rst = 0; #2000000 $fclose(outfile); #10 $finish; end always #5 clk = ~clk; genvar g; generate begin : gRand for (g = 0; g < N*4+16+4; g = g + 4) begin always @(posedge clk) begin a1[g+3:g] <= $urandom() % 16; b1[g+3:g] <= $urandom() % 16; end end end endgenerate reg [9:0] count; always @(posedge clk) if (rst) begin adr <= 0; count <= 0; end else begin ld <= 1'b0; if (adr==0) begin outfile = $fopen("d:/cores2022/rf6809/rtl/dfpu/test_bench/DFPMultiply128_tvo.txt", "wb"); $fwrite(outfile, "rm ------ A ------ ------- B ------ - DUT Product - - SIM Product -\n"); end count <= count + 1; if (count > 750) count <= 1'd1; if (count==2) begin a <= a1; b <= b1; rm <= adr[15:13]; ld <= 1'b1; //ad <= memd[adr][63: 0]; //bd <= memd[adr][127:64]; end if (adr==1 && count==2) begin a <= 128'h25ffc000000000000000000000000000; // 1 b <= 128'h25ffc000000000000000000000000000; // 1 end if (adr==2 && count==2) begin a <= 128'h26000000000000000000000000000000; // 10 b <= 128'h26000000000000000000000000000000; // 10 end if (adr==3 && count==2) begin a <= 128'h26004000000000000000000000000000; // 100 b <= 128'h26004000000000000000000000000000; // 100 end if (adr==4 && count==2) begin a <= 128'h26008000000000000000000000000000; // 1000 b <= 128'h26008000000000000000000000000000; // 1000 end if (adr==5 && count==2) begin a <= 128'h2601934B9C0C00000000000000000000; // 12345678 b <= 128'h26000000000000000000000000000000; // 10 end if (adr==6 && count==2) begin a <= 128'h44000000000000000000000000000000; b <= 128'h44000000000000000000000000000000; end if (adr==7 && count==2) begin a <= 128'h44004000000000000000000000000000; b <= 128'h44004000000000000000000000000000; end if (count==750) begin $fwrite(outfile, "%h\t%h\t%h\t%h\n", rm, a, b, o); adr <= adr + 1; end end //fpMulnr #(64) u1 (clk, 1'b1, a, b, o, rm);//, sign_exe, inf, overflow, underflow); DFPMultiply128nr u6 (clk, 1'b1, ld, a, b, o, rm, done);//, sign_exe, inf, overflow, underflow); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log