URL
https://opencores.org/ocsvn/funbase_ip_library/funbase_ip_library/trunk
Subversion Repositories funbase_ip_library
[/] [funbase_ip_library/] [trunk/] [TUT/] [ip.swp.api/] [openmcapi/] [1.0/] [test/] [func/] [fts_mcapi_pktchan_available.c] - Rev 145
Compare with Previous | Blame | View Log
/* * Copyright (c) 2010, Mentor Graphics Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of the <ORGANIZATION> nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * FILENAME * * fts_main.c * * *************************************************************************/ #include "fts_defs.h" #include "support_suite/mcapid_support.h" #include "mcapid.h" extern MCAPI_MUTEX MCAPID_FTS_Mutex; /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_21_1 * * DESCRIPTION * * Testing mcapi_pktchan_available - zero packets available. * * Node 0 – Create endpoint, open send side, wait for connection * * Node 1 – Create endpoint, get endpoint on Node 0, open receive * side, make connection, check for message count on * endpoint * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_21_1) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t tx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that the endpoint should be opened as a sender. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_OPEN_TX_SIDE_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the send side was opened. */ if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Get the send side endpoint. */ tx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_pktchan_i(tx_endp, mcapi_struct->local_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to complete. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Open the local endpoint as the receiver. */ mcapi_open_pktchan_recv_i(&mcapi_struct->pkt_rx_handle, mcapi_struct->local_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the open call to return successfully. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Check for data on the receive side. */ if (mcapi_pktchan_available(mcapi_struct->pkt_rx_handle, &mcapi_struct->status) != 0) { mcapi_struct->status = 0; } /* Close the receive side. */ mcapi_packetchan_recv_close_i(mcapi_struct->pkt_rx_handle, &request, &status); if (status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &status, MCAPI_FTS_TIMEOUT); } } } } /* Tell the other side to close the send side. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CLOSE_TX_SIDE_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_21_1 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_21_2 * * DESCRIPTION * * Testing mcapi_pktchan_available - one packet available. * * Node 0 – Create endpoint, open send side, wait for connection, * send one packet * * Node 1 – Create endpoint, get endpoint on Node 0, open receive * side, make connection, check for message count on * endpoint * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_21_2) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t tx_endp, rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* An extra endpoint is required for this test. */ rx_endp = mcapi_create_endpoint(MCAPI_PORT_ANY, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that the endpoint should be opened as a sender. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_OPEN_TX_SIDE_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the send side was opened. */ if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Get the send side endpoint. */ tx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_pktchan_i(tx_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to complete. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Open the local endpoint as the receiver. */ mcapi_open_pktchan_recv_i(&mcapi_struct->pkt_rx_handle, rx_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the open call to return successfully. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Tell the other side to send a packet. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_TX_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for data to be received on the local endpoint. */ while (mcapi_pktchan_available(mcapi_struct->pkt_rx_handle, &mcapi_struct->status) != 1) { MCAPID_Sleep(250); } } /* Close the receive side. */ mcapi_packetchan_recv_close_i(mcapi_struct->pkt_rx_handle, &request, &status); if (status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &status, MCAPI_FTS_TIMEOUT); } } } } /* Tell the other side to close the send side. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CLOSE_TX_SIDE_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } /* Delete the extra endpoint. */ mcapi_delete_endpoint(rx_endp, &status); } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_21_2 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_21_3 * * DESCRIPTION * * Testing mcapi_pktchan_available - two packets available. * * Node 0 – Create endpoint, open send side, wait for connection, * send two packets * * Node 1 – Create endpoint, get endpoint on Node 0, open receive * side, make connection, check for message count on * endpoint * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_21_3) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t tx_endp, rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* An extra endpoint is required for this test. */ rx_endp = mcapi_create_endpoint(MCAPI_PORT_ANY, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that the endpoint should be opened as a sender. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_OPEN_TX_SIDE_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the send side was opened. */ if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Get the send side endpoint. */ tx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_pktchan_i(tx_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to complete. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Open the local endpoint as the receiver. */ mcapi_open_pktchan_recv_i(&mcapi_struct->pkt_rx_handle, rx_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the open call to return successfully. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Tell the other side to send a packet. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_TX_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Tell the other side to send another packet. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_TX_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for data to be received on the local endpoint. */ while (mcapi_pktchan_available(mcapi_struct->pkt_rx_handle, &mcapi_struct->status) != 2) { MCAPID_Sleep(250); } } } /* Close the receive side. */ mcapi_packetchan_recv_close_i(mcapi_struct->pkt_rx_handle, &request, &status); if (status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &status, MCAPI_FTS_TIMEOUT); } } } } /* Tell the other side to close the send side. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CLOSE_TX_SIDE_PKT, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } /* Delete the extra endpoint. */ mcapi_delete_endpoint(rx_endp, &status); } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_21_3 */