OpenCores
URL https://opencores.org/ocsvn/gecko3/gecko3/trunk

Subversion Repositories gecko3

[/] [gecko3/] [trunk/] [GECKO3COM/] [gecko3com-fw/] [firmware/] [include/] [syncdelay.h] - Rev 36

Go to most recent revision | Compare with Previous | Blame | View Log

/* -*- c++ -*- */
/*
 * Copyright 2003 Free Software Foundation, Inc.
 * 
 * This file is part of GNU Radio
 * 
 * GNU Radio is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3, or (at your option)
 * any later version.
 * 
 * GNU Radio is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with GNU Radio; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */
 
/************************************************************************/
/** \file         syncdelay.h
 *************************************************************************
 *
 *  \author       GNU Radio
 *
 */
 
#ifndef _SYNCDELAY_H_
#define _SYNCDELAY_H_
 
/**
 * \brief Magic delay required between access to certain xdata registers (TRM page 15-106).
 *
 * For our configuration, 48 MHz FX2 / 48 MHz IFCLK, we need three cycles.  Each
 * NOP is a single cycle....
 *
 * From TRM page 15-105:
 *
 * Under certain conditions, some read and write access to the FX2 registers must
 * be separated by a "synchronization delay".  The delay is necessary only under the
 * following conditions:
 *
 *   - between a write to any register in the 0xE600 - 0xE6FF range and a write to one
 *     of the registers listed below.
 *
 *   - between a write to one of the registers listed below and a read from any register
 *     in the 0xE600 - 0xE6FF range.
 *
 *   Registers which require a synchronization delay:
 *
 *	FIFORESET			FIFOPINPOLAR
 *	INPKTEND			EPxBCH:L
 *	EPxFIFOPFH:L			EPxAUTOINLENH:L
 *	EPxFIFOCFG			EPxGPIFFLGSEL
 *	PINFLAGSAB			PINFLAGSCD
 *	EPxFIFOIE			EPxFIFOIRQ
 *	GPIFIE				GPIFIRQ
 *	UDMACRCH:L			GPIFADRH:L
 *	GPIFTRIG			EPxGPIFTRIG
 *	OUTPKTEND			REVCTL
 *	GPIFTCB3			GPIFTCB2
 *	GPIFTCB1			GPIFTCB0
 *
 *
 * FIXME ensure that the peep hole optimizer isn't screwing us
 */
#define	SYNCDELAY	_asm nop; nop; nop; _endasm
 
/** no operation, idle for ony cycle */
#define	NOP		_asm nop; _endasm
 
 
#endif /* _SYNCDELAY_H_ */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.