URL
https://opencores.org/ocsvn/gecko3/gecko3/trunk
Subversion Repositories gecko3
[/] [gecko3/] [trunk/] [GECKO3COM/] [gecko3com-fw/] [firmware/] [lib/] [usb_dfu.c] - Rev 20
Go to most recent revision | Compare with Previous | Blame | View Log
/* GECKO3COM * * Copyright (C) 2008 by * ___ ____ _ _ * ( _`\ ( __)( ) ( ) * | (_) )| (_ | |_| | Berne University of Applied Sciences * | _ <'| _) | _ | School of Engineering and * | (_) )| | | | | | Information Technology * (____/'(_) (_) (_) * * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ //#define USB_DFU_SUPPORT #include <stdint.h> #include "fx2regs.h" #include "isr.h" #include "usb_requests.h" #include "usb_common.h" #include "usb_dfu.h" #include "debugprint.h" volatile uint8_t usb_dfu_status = DFU_STATUS_OK; volatile enum dfu_state usb_dfu_state = DFU_STATE_appIDLE; volatile uint8_t usb_dfu_timeout = DFU_TIMEOUT; uint8_t usb_handle_dfu_packet (void) { if ((bRequestType & bmRT_DIR_MASK) == bmRT_DIR_IN){ /********************************* * handle the DFU IN requests ********************************/ switch (bRequest){ case DFU_UPLOAD: usb_dfu_status == DFU_STATUS_errSTALLEDPKT; return 0; break; case DFU_GETSTATUS: EP0BUF[0] = usb_dfu_status; EP0BUF[1] = 0; EP0BUF[2] = 0; EP0BUF[3] = 0xff; EP0BUF[4] = usb_dfu_state; EP0BUF[5] = 0; EP0BCH = 0; EP0BCL = 6; break; case DFU_GETSTATE: EP0BUF[0] = usb_dfu_state; EP0BCH = 0; EP0BCL = 1; break; default: return 0; } } else if ((bRequestType & bmRT_DIR_MASK) == bmRT_DIR_OUT){ /*********************************** * handle the DFU OUT requests **********************************/ switch (bRequest){ case DFU_DETACH: if(usb_dfu_state == DFU_STATE_appIDLE){ usb_toggle_dfu_handlers(); usb_dfu_state = DFU_STATE_appDETACH; usb_dfu_timeout = DFU_TIMEOUT; /* FIXME start watchdog for usb reset */ } else { usb_dfu_status = DFU_STATUS_errSTALLEDPKT; return 0; } break; case DFU_DNLOAD: if((usb_dfu_state == DFU_STATE_dfuIDLE || usb_dfu_state == DFU_STATE_dfuDNLOAD_IDLE) && wLengthL > 0){ if(!app_firmware_write()){ usb_dfu_status = DFU_STATUS_errWRITE; usb_dfu_state = DFU_STATE_dfuERROR; return 0; } usb_dfu_state = DFU_STATE_dfuDNLOAD_IDLE; } else if(usb_dfu_state == DFU_STATE_dfuDNLOAD_IDLE && wLengthL == 0){ usb_toggle_dfu_handlers(); usb_dfu_state = DFU_STATE_dfuMANIFEST_WAIT_RST; } else { usb_dfu_status = DFU_STATUS_errSTALLEDPKT; return 0; } break; case DFU_CLRSTATUS: if(usb_dfu_state == DFU_STATE_dfuERROR){ usb_dfu_status = DFU_STATUS_OK; usb_dfu_state = DFU_STATE_dfuIDLE; } else { usb_dfu_status = DFU_STATUS_errSTALLEDPKT; return 0; } break; case DFU_ABORT: if(usb_dfu_state != DFU_STATE_appIDLE && \ usb_dfu_state != DFU_STATE_appDETACH){ /*FIXME stop all pending operations */ usb_dfu_status = DFU_STATUS_OK; usb_dfu_state = DFU_STATE_dfuIDLE; } else { usb_dfu_status = DFU_STATUS_errSTALLEDPKT; return 0; } break; default: usb_dfu_status = DFU_STATUS_errSTALLEDPKT; return 0; } } else return 0; /* invalid bRequestType */ return 1; }
Go to most recent revision | Compare with Previous | Blame | View Log