Subversion Repositories gecko3

#*****************************************************************
#   compxlib initialization file (compxlib.cfg)                  *
#                                                                *
#   Copyright (c) 1995-2007 Xilinx, Inc.  All rights reserved.   *
#                                                                *
#   Important :-                                                 *
#       All options/variables must start from first column       *
#                                                                *
#*****************************************************************

#
RELEASE_VERSION:J.33
#
# set current simulator name
SIMULATOR_NAME:mti_se
#
# set current language name
LANGUAGE_NAME:vhdl
#
# set compilation execution mode
EXECUTE:on
#
# compile additional libraries in architecture specfic directories
EXTRACT_LIB_FROM_ARCH:on
#
MAP_PRE_COMPILED_LIBS:off
#
# donot re-compile dependent libraries
LOCK_PRECOMPILED:off
#
# print compilation command template in log file
LOG_CMD_TEMPLATE:off
#
# print Pre-Compiled library info
PRECOMPILED_INFO:on
#
# create backup copy of setup files
BACKUP_SETUP_FILES:on
#
# use enhanced compilation techniques for faster library compilation
# (applicable to selected libraries only)
FAST_COMPILE:on
#
# abort compilation process if errors are detected in the library
ABORT_ON_ERROR:off
#
# save compilation results to log file with the name specified with -log option
ADD_COMPILATION_RESULTS_TO_LOG:on
#
# compile library in the directory specified by the environment variable if the
# -dir option is not specified
USE_OUTPUT_DIR_ENV:NONE
#
# turn on/off smartmodel installation process
INSTALL_SMARTMODEL:on
#
# smartmodel installation directory
INSTALL_SMARTMODEL_DIR:
#
#///////////////////////////////////////////////////////////////////////
# MTI-SE setup file name
SET:mti_se:MODELSIM=modelsim.ini
#
# MTI-SE options for VHDL Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vcom -work <library> <OPTION> <file_name>
#
OPTION:mti_se:vhdl:u:-source -93
OPTION:mti_se:vhdl:s:-source -93
OPTION:mti_se:vhdl:c:-source -93 -explicit
OPTION:mti_se:vhdl:m:-source -93
OPTION:mti_se:vhdl:a:-source -93
OPTION:mti_se:vhdl:r:-source -93
#
# MTI-SE options for VERILOG Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vlog -work <library> <OPTION> <file_name>
#
OPTION:mti_se:verilog:u:-source -93
OPTION:mti_se:verilog:s:-source -93
OPTION:mti_se:verilog:n:-source -93
OPTION:mti_se:verilog:c:-source -93
OPTION:mti_se:verilog:m:-source -93
OPTION:mti_se:verilog:a:-source -93
OPTION:mti_se:verilog:r:-source -93
#
#///////////////////////////////////////////////////////////////////////
# MTI-PE setup file name
SET:mti_pe:MODELSIM=modelsim.ini
#
# MTI-PE options for VHDL Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vcom -work <library> <OPTION> <file_name>
#
OPTION:mti_pe:vhdl:u:-source -93
OPTION:mti_pe:vhdl:s:-source -93
OPTION:mti_pe:vhdl:c:-source -93 -explicit
OPTION:mti_pe:vhdl:m:-source -93
OPTION:mti_pe:vhdl:a:-source -93
OPTION:mti_pe:vhdl:r:-source -93
#
# MTI-PE options for VERILOG Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vlog -work <library> <OPTION> <file_name>
#
OPTION:mti_pe:verilog:u:-source -93
OPTION:mti_pe:verilog:s:-source -93
OPTION:mti_pe:verilog:n:-source -93
OPTION:mti_pe:verilog:c:-source -93
OPTION:mti_pe:verilog:m:-source -93
OPTION:mti_pe:verilog:a:-source -93
OPTION:mti_pe:verilog:r:-source -93
#
#///////////////////////////////////////////////////////////////////////
# NCSIM setup file names
SET:ncsim:CDS=cds.lib
SET:ncsim:HDL=hdl.var
#
# NCSIM options for VHDL Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# ncvhdl -work <library> <OPTION> <file_name>
#
OPTION:ncsim:vhdl:u:-MESSAGES -v93  -RELAX -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:vhdl:s:-MESSAGES -v93  -RELAX -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:vhdl:c:-MESSAGES -v93  -RELAX -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:vhdl:m:-MESSAGES -v93  -RELAX -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:vhdl:a:-MESSAGES -v93  -RELAX -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:vhdl:r:-MESSAGES -v93  -RELAX -NOLOG -CDSLIB $CDS -HDLVAR $HDL
#
# NCSIM options for VERILOG Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# ncvlog -work <library> <OPTION> <file_name>
#
OPTION:ncsim:verilog:u:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:verilog:s:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:verilog:n:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:verilog:c:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:verilog:m:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:verilog:a:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
OPTION:ncsim:verilog:r:-MESSAGES -NOLOG -CDSLIB $CDS -HDLVAR $HDL
#
#///////////////////////////////////////////////////////////////////////
# ISIM setup file name
SET:xilisim:XILISIM=xilinxsim.ini
#
# ISIM options for VHDL Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vhpcomp -work <library> <OPTION> <file_name>
#
OPTION:xilisim:vhdl:u:-nocodegen -compact
OPTION:xilisim:vhdl:s:-nocodegen -compact
OPTION:xilisim:vhdl:c:-nocodegen -compact
OPTION:xilisim:vhdl:m:-nocodegen -compact
OPTION:xilisim:vhdl:a:-nocodegen -compact
OPTION:xilisim:vhdl:r:-nocodegen -compact
#
# ISIM options for VERILOG Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vlogcomp -work <library> <OPTION> <file_name>
#
OPTION:xilisim:verilog:u:-nocodegen -compact
OPTION:xilisim:verilog:s:-nocodegen -compact
OPTION:xilisim:verilog:n:-nocodegen -compact
OPTION:xilisim:verilog:c:-nocodegen -compact
OPTION:xilisim:verilog:m:-nocodegen -compact
OPTION:xilisim:verilog:a:-nocodegen -compact
OPTION:xilisim:verilog:r:-nocodegen -compact
#
#///////////////////////////////////////////////////////////////////////
# VCS-MX/VCS-Mxi setup file name
SET:vcs_mx:SYNOPSYS=synopsys_sim.setup
#
# VCS-MX/VCS-MXi options for VHDL Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vhdlan -work <library> <OPTION> <file_name>
#
OPTION:vcs_mx:vhdl:u:-nc
OPTION:vcs_mx:vhdl:s:-nc
OPTION:vcs_mx:vhdl:c:-nc
OPTION:vcs_mx:vhdl:m:-nc
OPTION:vcs_mx:vhdl:a:-nc
OPTION:vcs_mx:vhdl:r:-nc
#
# VCS-MX options for VERILOG Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vcs <OPTION> -Mdir=<library_path> -y <source_lib_path> +libext+.v <file_name>
#
OPTION:vcs_mx:verilog:u:-Mupdate +v2k
OPTION:vcs_mx:verilog:s:-Mupdate +v2k
OPTION:vcs_mx:verilog:n:-Mupdate +v2k
OPTION:vcs_mx:verilog:c:-Mupdate +v2k
OPTION:vcs_mx:verilog:m:-lmc-swift -Mupdate +v2k
OPTION:vcs_mx:verilog:a:-Mupdate +v2k
OPTION:vcs_mx:verilog:r:-Mupdate +v2k
#
# VCS-MXi options for VERILOG Libraries
# Syntax:- 
# OPTION:<simulator_name>:<language>:<library>:<options>
# <library> :- u (unisim) s (simprim) c (xilinxcorelib)
#              m (smartmodel) a (abel) r (coolrunner)
# vcsi <OPTION> -Mdir=<library_path> -y <source_lib_path> +libext+.v <file_name>
#
OPTION:vcs_mxi:verilog:u:-Mupdate +v2k
OPTION:vcs_mxi:verilog:s:-Mupdate +v2k
OPTION:vcs_mxi:verilog:n:-Mupdate +v2k
OPTION:vcs_mxi:verilog:c:-Mupdate +v2k
OPTION:vcs_mxi:verilog:m:-lmc-swift -Mupdate +v2k
OPTION:vcs_mxi:verilog:a:-Mupdate +v2k
OPTION:vcs_mxi:verilog:r:-Mupdate +v2k
#///////////////////////////////////////////////////////////////////////
# End