OpenCores
URL https://opencores.org/ocsvn/gecko3/gecko3/trunk

Subversion Repositories gecko3

[/] [gecko3/] [trunk/] [GECKO3COM/] [gecko3com-ip/] [core/] [gpif_com.vhd] - Rev 22

Go to most recent revision | Compare with Previous | Blame | View Log

--  GECKO3COM IP Core
--
--  Copyright (C) 2009 by
--   ___    ___   _   _
--  (  _ \ (  __)( ) ( )
--  | (_) )| (   | |_| |   Bern University of Applied Sciences
--  |  _ < |  _) |  _  |   School of Engineering and
--  | (_) )| |   | | | |   Information Technology
--  (____/ (_)   (_) (_)
--
--  This program is free software: you can redistribute it and/or modify
--  it under the terms of the GNU General Public License as published by
--  the Free Software Foundation, either version 3 of the License, or
--  (at your option) any later version.
--
--  This program is distributed in the hope that it will be useful,
--  but WITHOUT ANY WARRANTY; without even the implied warranty of
--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--  GNU General Public License for more details. 
--  You should have received a copy of the GNU General Public License
--  along with this program.  If not, see <http://www.gnu.org/licenses/>.
--
--  URL to the project description: 
--    http://labs.ti.bfh.ch/gecko/wiki/systems/gecko3com/start
--------------------------------------------------------------------------------
--
--  Author:  Andreas Habegger, Christoph Zimmermann
--  Date of creation: 8. April 2009
--  Description:
--    GECKO3COM defines the communication between the GECKO3main and a USB
--    Master e.g. a computer.
--
--    This file is the top module, it instantiates all required submodules and
--    connects them together.
--
--  Target Devices:     Xilinx Spartan3 FPGA's
--                      (usage of BlockRam in the Datapath)
--  Tool versions:      11.1
--  Dependencies:
--
--------------------------------------------------------------------------------
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
 
library work;
use work.GECKO3COM_defines.all;
 
 
entity gpif_com is
  port (
    -- interface signals to higher level
    i_nReset  : in  std_logic;          -- asynchronous active low reset
    i_SYSCLK  : in  std_logic;          -- FPGA System CLK
    o_ABORT   : out std_logic;          -- Abort detected, you have to flush the data
    o_RX      : out std_logic;          -- controll LED rx
    o_TX      : out std_logic;          -- controll LED tx
    i_RD_EN   : in  std_logic;          -- read enable
    o_EMPTY   : out std_logic;          -- receive fifo empty
    o_RX_DATA : out std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);  -- receive data
    i_EOM     : in  std_logic;
    i_WR_EN   : in  std_logic;          -- write enable
    o_FULL    : out std_logic;          -- send fifo full
    i_TX_DATA : in  std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);  -- send data
 
    -- GPIF connections, to be connected to FPGA pins
    i_IFCLK    : in    std_logic;       -- GPIF CLK (GPIF is Master and provides the clock)
    i_WRU      : in    std_logic;       -- write from GPIF
    i_RDYU     : in    std_logic;       -- GPIF is ready
    o_WRX      : out   std_logic;       -- To write to GPIF
    o_RDYX     : out   std_logic;       -- IP Core is ready
    b_gpif_bus : inout std_logic_vector(SIZE_DBUS_GPIF-1 downto 0));  -- bidirect data bus
end gpif_com;
 
 
 
architecture structure of gpif_com is
 
  -- interconection signals
 
  signal s_FIFOrst, s_WRX, s_RDYX      : std_logic;
 
  signal s_ABORT_FSM, s_ABORT_TMP  : std_logic;
  signal s_RX_FSM, s_RX_TMP  : std_logic;
  signal s_TX_FSM, s_TX_TMP  : std_logic;
  signal s_EOM, s_EOM_TMP, s_EOM_FF : std_logic;  -- End of message
  signal s_X2U_FULL_IFCLK, s_X2U_FULL_TMP : std_logic;
 
  -- USB to Xilinx (U2X)
  signal s_U2X_WR_EN,
    s_U2X_RD_EN,
    s_U2X_FULL,
    s_U2X_AM_FULL,
    s_U2X_EMPTY,
    s_U2X_AM_EMPTY : std_logic;
  signal s_U2X_DATA	: std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);
 
  -- Xilinx to USB (X2U)
  signal s_X2U_WR_EN,
    s_X2U_RD_EN,
    s_X2U_FULL,
    s_X2U_AM_FULL,
    s_X2U_EMPTY,
    s_X2U_AM_EMPTY : std_logic;
  signal s_X2U_DATA	: std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);
 
  -----------------------------------------------------------------------------
  -- data bus
  -----------------------------------------------------------------------------
 
  -- data signals
  signal s_dbus_trans_dir     : std_logic;
  signal s_dbus_in  : std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);
  signal s_dbus_out : std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);
 
  -----------------------------------------------------------------------------
  -- COMPONENTS
  -----------------------------------------------------------------------------
 
  -- FSM GPIF
  component gpif_com_fsm
    port (
      i_nReset         : in  std_logic;
      i_IFCLK          : in  std_logic;
      i_WRU            : in  std_logic;
      i_RDYU           : in  std_logic;
      i_EOM            : in  std_logic;
      i_U2X_FULL       : in  std_logic;
      i_U2X_AM_FULL    : in  std_logic;
      i_X2U_FULL_IFCLK : in  std_logic;
      i_X2U_AM_EMPTY   : in  std_logic;
      i_X2U_EMPTY      : in  std_logic;
      o_bus_trans_dir  : out std_logic;
      o_U2X_WR_EN      : out std_logic;
      o_X2U_RD_EN      : out std_logic;
      o_FIFOrst        : out std_logic;
      o_WRX            : out std_logic;
      o_RDYX           : out std_logic;
      o_ABORT          : out std_logic;
      o_RX             : out std_logic;
      o_TX             : out std_logic);
  end component;
 
  -- FIFO dualclock to cross the clock domain between the GPIF and the FPGA
  component fifo_dualclock
    port (
      i_din          : IN  std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);
      i_rd_clk       : IN  std_logic;
      i_rd_en        : IN  std_logic;
      i_rst          : IN  std_logic;
      i_wr_clk       : IN  std_logic;
      i_wr_en        : IN  std_logic;
      o_almost_empty : OUT std_logic;
      o_almost_full  : OUT std_logic;
      o_dout         : OUT std_logic_vector(SIZE_DBUS_GPIF-1 downto 0);
      o_empty        : OUT std_logic;
      o_full         : OUT std_logic);
  end component;
 
 
begin
 
  -----------------------------------------------------------------------------
  -- Port map
  -----------------------------------------------------------------------------
 
  F_IN : fifo_dualclock
    port map (
      i_din          => s_dbus_in,
      i_rd_clk       => i_SYSCLK,
      i_rd_en        => s_U2X_RD_EN,
      i_rst          => s_FIFOrst,
      i_wr_clk       => i_IFCLK ,
      i_wr_en        => s_U2X_WR_EN,
      o_almost_empty => s_U2X_AM_EMPTY,
      o_almost_full  => s_U2X_AM_FULL,
      o_dout         => s_U2X_DATA,
      o_empty        => s_U2X_EMPTY,
      o_full         => s_U2X_FULL
      );
 
 
  F_OUT : fifo_dualclock
    port map (
      i_din          => s_X2U_DATA,
      i_rd_clk       => i_IFCLK,
      i_rd_en        => s_X2U_RD_EN,
      i_rst          => s_FIFOrst,
      i_wr_clk       => i_SYSCLK,
      i_wr_en        => s_X2U_WR_EN,
      o_almost_empty => s_X2U_AM_EMPTY,
      o_almost_full  => s_X2U_AM_FULL,
      o_dout         => s_dbus_out,
      o_empty        => s_X2U_EMPTY,
      o_full         => s_X2U_FULL
      );
 
 
  FSM_GPIF : gpif_com_fsm
    port map (
      i_nReset         => i_nReset,
      i_IFCLK          => i_IFCLK,
      i_WRU            => i_WRU,
      i_RDYU           => i_RDYU,
      i_EOM            => s_EOM_FF,
      i_U2X_FULL       => s_U2X_FULL,
      i_U2X_AM_FULL    => s_U2X_AM_FULL,
      i_X2U_FULL_IFCLK => s_X2U_FULL_IFCLK,
      i_X2U_AM_EMPTY   => s_X2U_AM_EMPTY,
      i_X2U_EMPTY      => s_X2U_EMPTY,
      o_U2X_WR_EN      => s_U2X_WR_EN,
      o_X2U_RD_EN      => s_X2U_RD_EN,
      o_FIFOrst        => s_FIFOrst,
      o_bus_trans_dir  => s_dbus_trans_dir,
      o_WRX            => s_WRX,
      o_RDYX           => s_RDYX,
      o_ABORT          => s_ABORT_FSM,
      o_RX             => s_RX_FSM,
      o_TX             => s_TX_FSM
      );
 
 
 
  s_U2X_RD_EN  <= i_RD_EN;
  o_EMPTY   <= s_U2X_EMPTY;
  o_RX_DATA <= s_U2X_DATA;
 
  s_X2U_WR_EN <= i_WR_EN;
  o_FULL    <= s_X2U_FULL;
  s_X2U_DATA <= i_TX_DATA;
 
  o_WRX <= s_WRX;
  o_RDYX <= s_RDYX;
 
  -- Double buffer the ABORT, RX and TX signal to avoid metastability
  double_buf_sig : process (i_SYSCLK, i_nReset)
  begin
    if i_nReset = '0' then
      o_ABORT     <= '0';
      s_ABORT_TMP <= '0';
      o_TX        <= '0';
      s_TX_TMP    <= '0';
      o_RX        <= '0';
      s_RX_TMP    <= '0';
    elsif rising_edge(i_SYSCLK) then
      o_ABORT     <= s_ABORT_TMP;
      s_ABORT_TMP <= s_ABORT_FSM;
      o_TX        <= s_TX_TMP;
      s_TX_TMP    <= s_TX_FSM;
      o_RX        <= s_RX_TMP;
      s_RX_TMP    <= s_RX_FSM;
    end if;
  end process double_buf_sig;
 
  -- Double buffer the s_EOM and s_X2U_FULL_IFCLK signal to avoid metastability
  double_buf_ifclk : process (i_IFCLK, i_nReset)
  begin
    if i_nReset = '0' then
      s_X2U_FULL_TMP <= '0';
      s_X2U_FULL_IFCLK <= '0';
    elsif rising_edge(i_IFCLK) then
      s_EOM     <= s_EOM_TMP;
      s_EOM_TMP <= i_EOM;
      s_X2U_FULL_IFCLK <= s_X2U_FULL_TMP;
      s_X2U_FULL_TMP <= s_X2U_FULL;
    end if;
  end process double_buf_ifclk;
 
  -- purpose: EOM bit flip-flop
  -- type   : sequential
  -- inputs : i_IFCLK, i_nReset, s_EOM, s_X2U_EMPTY
  -- outputs: s_EOM_FF
  EOM_FF: process (i_IFCLK, i_nReset)
  begin  -- process EOM_FF
    if i_nReset = '0' then                -- asynchronous reset (active low)
      s_EOM_FF <= '0';
    elsif i_IFCLK'event and i_IFCLK = '1' then  -- rising clock edge
      if s_EOM = '1' then
        s_EOM_FF <= '1';
      end if;
      if s_X2U_EMPTY = '1' then
        s_EOM_FF <= '0';
      end if;
    end if;
  end process EOM_FF;
 
  -----------------------------------------------------------------------------
  -- Data bus access
  -----------------------------------------------------------------------------
 
  -- purpose: to handle the access on the bidirectional bus
  -- type   : combinational
  -- inputs : s_bus_trans_dir
  -- outputs: 
  bus_access : process (s_dbus_trans_dir, s_dbus_out)
  begin  -- process bus_access
    if s_dbus_trans_dir = '1' then
      b_gpif_bus <= s_dbus_out;
    else
      b_gpif_bus <= (others => 'Z');
    end if;
  end process bus_access;
 
  -- buffer the gpif bus input signals to avoid that the last word in the
  -- usb to xilinx transfer is read twice.
  buf_input : process (i_IFCLK)
  begin
    if rising_edge(i_IFCLK) then
      s_dbus_in <= b_gpif_bus;
    end if;
  end process buf_input;
 
 
end structure;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.