URL
https://opencores.org/ocsvn/gpib_controller/gpib_controller/trunk
Subversion Repositories gpib_controller
[/] [gpib_controller/] [trunk/] [vhdl/] [src/] [gpib/] [gpibInterface.vhd] - Rev 6
Go to most recent revision | Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- Entity: gpibInterface -- Date: 13:34 15/10/2011 -- Author: apaluch -------------------------------------------------------------------------------- library IEEE; use IEEE.STD_LOGIC_1164.ALL; use work.gpibComponents.all; entity gpibInterface is port ( clk : in std_logic; reset : std_logic; -- application interface isLE : in std_logic; isTE : in std_logic; lpeUsed : in std_logic; fixedPpLine : in std_logic_vector (2 downto 0); eosUsed : in std_logic; eosMark : in std_logic_vector (7 downto 0); myListAddr : in std_logic_vector (4 downto 0); myTalkAddr : in std_logic_vector (4 downto 0); secAddrMask : in std_logic_vector (31 downto 0); data : in std_logic_vector (7 downto 0); status_byte : in std_logic_vector (7 downto 0); T1 : in std_logic_vector (7 downto 0); -- local commands to interface rdy : in std_logic; -- ready for next message (AH) nba : in std_logic; -- new byte available (SH) ltn : in std_logic; -- listen (L, LE) lun : in std_logic; -- local unlisten (L, LE) lon : in std_logic; -- listen only (L, LE) ton : in std_logic; -- talk only (T, TE) endOf : in std_logic; -- end of byte string (T, TE) gts : in std_logic; -- go to standby (C) rpp : in std_logic; -- request parallel poll (C) tcs : in std_logic; -- take control synchronously (C, AH) tca : in std_logic; -- take control asynchronously (C) sic : in std_logic; -- send interface clear (C) rsc : in std_logic; -- request system control (C) sre : in std_logic; -- send remote enable (C) rtl : in std_logic; -- return to local (RL) rsv : in std_logic; -- request service (SR) ist : in std_logic; -- individual status (PP) lpe : in std_logic; -- local poll enable (PP) -- local commands from interface dvd : out std_logic; -- data valid (AH) wnc : out std_logic; -- wait for new cycle (SH) tac : out std_logic; -- talker active (T, TE) lac : out std_logic; -- listener active (L, LE) cwrc : out std_logic; -- controller write commands cwrd : out std_logic; -- controller write data clr : out std_logic; -- clear device (DC) trg : out std_logic; -- trigger device (DT) atl : out std_logic; -- addressed to listen (T or TE) att : out std_logic; -- addressed to talk(L or LE) mla : out std_logic; -- my listen addres decoded (L or LE) lsb : out std_logic; -- last byte spa : out std_logic; -- seriall poll active ppr : out std_logic; -- parallel poll ready sreq : out std_logic; -- service requested isLocal : out std_logic; -- device is local controlled currentSecAddr : out std_logic_vector (4 downto 0); -- current sec addr -- interface signals DI : in std_logic_vector (7 downto 0); DO : out std_logic_vector (7 downto 0); output_valid : out std_logic; -- attention ATN_in : in std_logic; ATN_out : out std_logic; -- data valid DAV_in : in std_logic; DAV_out : out std_logic; -- not ready for data NRFD_in : in std_logic; NRFD_out : out std_logic; -- no data accepted NDAC_in : in std_logic; NDAC_out : out std_logic; -- end or identify EOI_in : in std_logic; EOI_out : out std_logic; -- service request SRQ_in : in std_logic; SRQ_out : out std_logic; -- interface clear IFC_in : in std_logic; IFC_out : out std_logic; -- remote enable REN_in : in std_logic; REN_out : out std_logic ;debug1 : out std_logic ); end gpibInterface; architecture Behavioral of gpibInterface is -- function states signal LACS, LADS, SPAS, TACS, CACS, CSBS, CPPS, CTRS, CSRS, SACS, ACDS, TPAS, APRS, LPAS, TADS, ANRS, STRS, SDYS, PPAS, LOCS, LWLS : std_logic; -- decoded remote commands signal ATN_dec, DAC_dec, DAV_dec, END_c_dec, IDY_dec, IFC_dec, REN_dec, RFD_dec, SRQ_dec : std_logic; signal ACG_dec, DAB_dec, DCL_dec, EOS_dec, GET_dec, GTL_dec, LAG_dec, LLO_dec, MLA_dec, MTA_dec, MSA_dec, NUL_dec, OSA_dec, OTA_dec, PCG_dec, PPC_dec, PPE_dec, PPD_dec, PPR_dec, PPU_dec, RQS_dec, SCG_dec, SDC_dec, SPD_dec, SPE_dec, STB_dec, TAG_dec, TCT_dec, UCG_dec, UNL_dec, UNT_dec : std_logic; -- encoded remote commands signal ATN_enc, DAC_enc, RFD_enc, DAV_enc, END_OF_enc, IFC_enc, IDY_enc, REN_enc, RQS_enc, DAB_enc, EOS_enc, STB_enc, TCT_enc, SRQ_enc, PPR_enc : std_logic; -- PPR command data signal ppBitValue : std_logic; signal ppLineNumber : std_logic_vector (2 downto 0); -- internal signals signal secAddrDetected : std_logic; begin dvd <= ACDS; cwrc <= CACS; cwrd <= CSBS; atl <= LADS or LACS; lac <= LACS; att <= TACS or TADS or SPAS; mla <= MLA_dec; lsb <= ((eosUsed and EOS_dec) or END_c_dec) and ACDS; -- dvd = ACDS spa <= SPAS; ppr <= CPPS; sreq <= CSRS and SACS; isLocal <= LOCS or LWLS; -- acceptor handshake AH: if_func_AH port map( clk => clk, ----------------------------------------------------------------------- pon => reset, rdy => rdy, tcs => tcs, ----------------------------------------------------------------------- LACS => LACS, LADS => LADS, ----------------------------------------------------------------------- ATN => ATN_dec, DAV => DAV_dec, ----------------------------------------------------------------------- RFD => RFD_enc, DAC=> DAC_enc, ----------------------------------------------------------------------- ANRS => ANRS, ACDS => ACDS ); -- source handshake SH: if_func_SH port map( clk => clk, ----------------------------------------------------------------------- T1 => T1, ----------------------------------------------------------------------- pon => reset, nba => nba, ----------------------------------------------------------------------- TACS => TACS, SPAS => SPAS, CACS => CACS, CTRS => CTRS, ----------------------------------------------------------------------- ATN => ATN_dec, DAC => DAC_dec, RFD => RFD_dec, ----------------------------------------------------------------------- DAV => DAV_enc, ----------------------------------------------------------------------- wnc => wnc, ----------------------------------------------------------------------- STRS => STRS, SDYS => SDYS ); -- listener, extended listener L_LE: if_func_L_LE port map( clk => clk, ----------------------------------------------------------------------- isLE => isLE, ----------------------------------------------------------------------- pon => reset, ltn => ltn, lun => lun, lon => lon, ----------------------------------------------------------------------- ACDS => ACDS, CACS => CACS, TPAS => TPAS, ----------------------------------------------------------------------- ATN => ATN_dec, IFC => IFC_dec, MLA => MLA_dec, MTA => MTA_dec, UNL => UNL_dec, PCG => PCG_dec, MSA => MSA_dec, ----------------------------------------------------------------------- LACS => LACS, LADS => LADS, LPAS => LPAS, debug1 => debug1 ); -- talker, extended talker T_TE: if_func_T_TE port map( clk => clk, ----------------------------------------------------------------------- isTE => isTE, ----------------------------------------------------------------------- pon => reset, ton => ton, endOf => endOf, ----------------------------------------------------------------------- ACDS => ACDS, APRS => APRS, LPAS => LPAS, ----------------------------------------------------------------------- ATN => ATN_dec, IFC => IFC_dec, SPE => SPE_dec, SPD => SPD_dec, MTA => MTA_dec, OTA => OTA_dec, MLA => MLA_dec, OSA => OSA_dec, MSA => MSA_dec, PCG => PCG_dec, ----------------------------------------------------------------------- END_OF => END_OF_enc, RQS => RQS_enc, DAB => DAB_enc, EOS => EOS_enc, STB => STB_enc, ----------------------------------------------------------------------- tac => tac, ----------------------------------------------------------------------- SPAS => SPAS, TPAS => TPAS, TADS => TADS, TACS => TACS ); -- controller C: if_func_C port map( clk => clk, ----------------------------------------------------------------------- pon => reset, gts => gts, rpp => rpp, tcs => tcs, tca => tca, sic => sic, rsc => rsc, sre => sre, ----------------------------------------------------------------------- TADS => TADS, ACDS => ACDS, ANRS => ANRS, STRS => STRS, SDYS => SDYS, ----------------------------------------------------------------------- ATN_in => ATN_dec, IFC_in => IFC_dec, TCT_in => TCT_dec, SRQ_in => SRQ_dec, ----------------------------------------------------------------------- ATN_out => ATN_enc, IFC_out => IFC_enc, TCT_out => TCT_enc, IDY_out => IDY_enc, REN_out => REN_enc, ----------------------------------------------------------------------- CACS => CACS, CTRS => CTRS, CSBS => CSBS, CPPS => CPPS, CSRS => CSRS, SACS => SACS ); -- device clear DC: if_func_DC port map( clk => clk, ----------------------------------------------------------------------- LADS => LADS, ACDS => ACDS, ----------------------------------------------------------------------- DCL => DCL_dec, SDC => SDC_dec, ----------------------------------------------------------------------- clr => clr ); -- device trigger DT: if_func_DT port map( clk => clk, ----------------------------------------------------------------------- LADS => LADS, ACDS => ACDS, ----------------------------------------------------------------------- GET => GET_dec, ----------------------------------------------------------------------- trg => trg ); PP: if_func_PP port map( clk => clk, ----------------------------------------------------------------------- lpeUsed => lpeUsed, fixedPpLine => fixedPpLine, ----------------------------------------------------------------------- pon => reset, lpe => lpe, ist => ist, ----------------------------------------------------------------------- ACDS => ACDS, LADS => LADS, ----------------------------------------------------------------------- dio_data => DI(3 downto 0), ----------------------------------------------------------------------- IDY => IDY_dec, PPE => PPE_dec, PPD => PPD_dec, PPC => PPC_dec, PPU => PPU_dec, PCG => PCG_dec, ----------------------------------------------------------------------- PPR => PPR_enc, ppBitValue => ppBitValue, ppLineNumber => ppLineNumber, ----------------------------------------------------------------------- PPAS => PPAS ); RL: if_func_RL port map( clk => clk, ----------------------------------------------------------------------- pon => reset, rtl => rtl, ----------------------------------------------------------------------- ACDS => ACDS, LADS => LADS, ----------------------------------------------------------------------- REN => REN_dec, LLO => LLO_dec, MLA => MLA_dec, GTL => GTL_dec, ----------------------------------------------------------------------- LOCS => LOCS, LWLS => LWLS ); SR: if_func_SR port map( clk => clk, ----------------------------------------------------------------------- pon => reset, rsv => rsv, ----------------------------------------------------------------------- SPAS => SPAS, ----------------------------------------------------------------------- SRQ => SRQ_enc, ----------------------------------------------------------------------- APRS => APRS ); COMM_ENC: commandEcoder port map ( data => data, status_byte => status_byte, ------------------------------------------------------------------- ppBitValue => ppBitValue, ppLineNumber => ppLineNumber, ------------------------------------------------------------------- APRS => APRS, CACS => CACS, ------------------------------------------------------------------- ATN => ATN_enc, END_OF => END_OF_enc, IDY => IDY_enc, DAC => DAC_enc, RFD => RFD_enc, DAV => DAV_enc, IFC => IFC_enc, REN => REN_enc, SRQ => SRQ_enc, DAB => DAB_enc, EOS => EOS_enc, RQS => RQS_enc, STB => STB_enc, TCT => TCT_enc, PPR => PPR_enc, ------------------------------------------------------------------- DO => DO, output_valid => output_valid, ------------------------------------------------------------------- DAV_line => DAV_out, NRFD_line => NRFD_out, NDAC_line => NDAC_out, ATN_line => ATN_out, EOI_line => EOI_out, SRQ_line => SRQ_out, IFC_line => IFC_out, REN_line => REN_out ); -- command decoder COMM_DEC: commandDecoder port map ( DI => DI, DAV_line => DAV_in, NRFD_line => NRFD_in, NDAC_line => NDAC_in, ATN_line => ATN_in, EOI_line => EOI_in, SRQ_line => SRQ_in, IFC_line => IFC_in, REN_line => REN_in, ----------------------------------------------------------------------- eosMark => eosMark, eosUsed =>eosUsed, myListAddr => myListAddr, myTalkAddr => myTalkAddr, secAddrDetected => secAddrDetected, ----------------------------------------------------------------------- SPAS => SPAS, ----------------------------------------------------------------------- ATN => ATN_dec, DAC => DAC_dec, DAV => DAV_dec, END_c => END_c_dec, IDY => IDY_dec, IFC => IFC_dec, REN => REN_dec, RFD => RFD_dec, SRQ => SRQ_dec, ----------------------------------------------------------------------- ACG => ACG_dec, DAB => DAB_dec, DCL => DCL_dec, EOS => EOS_dec, GET => GET_dec, GTL => GTL_dec, LAG => LAG_dec, LLO => LLO_dec, MLA => MLA_dec, MTA => MTA_dec, MSA => MSA_dec, NUL => NUL_dec, OSA => OSA_dec, OTA => OTA_dec, PCG => PCG_dec, PPC => PPC_dec, PPE => PPE_dec, PPD => PPD_dec, PPR => PPR_dec, PPU => PPU_dec, RQS => RQS_dec, SCG => SCG_dec, SDC => SDC_dec, SPD => SPD_dec, SPE => SPE_dec, STB => STB_dec, TAG => TAG_dec, TCT => TCT_dec, UCG => UCG_dec, UNL => UNL_dec, UNT => UNT_dec ); SECAD: SecondaryAddressDecoder port map ( secAddrMask => secAddrMask, DI => DI(4 downto 0), secAddrDetected => secAddrDetected ); SECADS: SecAddrSaver port map ( reset => reset, TADS => TADS, TPAS => TPAS, LADS => LADS, LPAS => LPAS, MSA_Dec => MSA_Dec, DI => DI(4 downto 0), currentSecAddr => currentSecAddr ); end Behavioral;
Go to most recent revision | Compare with Previous | Blame | View Log