OpenCores
URL https://opencores.org/ocsvn/jart/jart/trunk

Subversion Repositories jart

[/] [jart/] [trunk/] [BLRT/] [kComparisonCell.vhd] - Rev 31

Go to most recent revision | Compare with Previous | Blame | View Log

-- Author : Julian Andres Guarin Reyes.
-- Project : JART, Just Another Ray Tracer.
-- email : jguarin2002 at gmail.com, j.guarin at javeriana.edu.co
 
-- This code was entirely written by Julian Andres Guarin Reyes.
-- The following code is licensed under GNU Public License
-- http://www.gnu.org/licenses/gpl-3.0.txt.
 
 -- This file is part of JART (Just Another Ray Tracer).
 
    -- JART (Just Another Ray Tracer) is free software: you can redistribute it and/or modify
    -- it under the terms of the GNU General Public License as published by
    -- the Free Software Foundation, either version 3 of the License, or
    -- (at your option) any later version.
 
    -- JART (Just Another Ray Tracer) is distributed in the hope that it will be useful,
    -- but WITHOUT ANY WARRANTY; without even the implied warranty of
    -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    -- GNU General Public License for more details.
 
    -- You should have received a copy of the GNU General Public License
    -- along with JART (Just Another Ray Tracer).  If not, see <http://www.gnu.org/licenses/>.
 
-- This is a discriminant proof cell.	
 
library ieee;
use ieee.std_logic_1164.all;
use work.powerGrid.all;
 
 
entity kComparisonCell is
	generic (	W 		: integer := 32	);
	port (		
				clk,rst		: in std_logic;
 
				nxtSphere	: in std_logic; -- Controls when the sphere goes to the next Row. 
				pipeOn		: in std_logic; -- Enables / Disable the upwarding flow.
				kinput		: in std_logic_vector (W-1 downto 0);
				koutput		: out std_logic_vector (W-1 downto 0);
 
				vdinput		: in std_logic_vector (W-1 downto 0);	-- V.D input.
				vdoutput	: out std_logic_vector (W-1 downto 0)	-- Selected dot product.
 
 
	);
	end port;
end entity;
 
 
architecture rtl of kComparisonCell is 
 
	signal ssge32	: std_logic;	-- Signed "Greater or equal  than" signal.
 
begin
 
	comparison : sge32 port map (
		dataa	=> vdinput,
		datab 	=> kinput,
		AgeB	=> ssge32
		);
 
	-- When ssge32 (greater or equal signal) is set then V.D > kte, therefore intersection is confirmed and  V.D is to be shifted to the distance comparison grid.
	selector : process (rst,clk,ssg32,pipeOn)
	begin
 
		if rst='0' then
 
			-- At the beginning set the Maximum over Maximum distance.
			vdoutput <= '0' & (others =>'1');
 
		elsif rising_edge(clk) and pipeOn ='1' then 
 
			if ssge32 = '1' then -- If VD ids grater or equal than K .....
				vdoutput <= vdinput;
			else
				vdoutput <= '0' & (others =>'1');
			end if;
 
		end if;
 
	end process;
 
	-- Behavioral : When nxtSphere is set, the Sphere and its K constant should go the the next row
 
	kPipeStage : process (clk,rst,nxtSphere)
	begin
 
		if rst='0' then
 
			koutput <= (others => '0');
 
		elsif rising_edge(clk) and nxtSphere ='1' then
 
			koutput <= kinput;
 
		end if;
 
	end process;
 
 
 
end rtl;
 
 
 
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.