Subversion Repositories leros

--
--
--  This file is a part of JOP, the Java Optimized Processor
--
--  Copyright (C) 2001-2008, Martin Schoeberl (martin@jopdesign.com)
--
--  This program is free software: you can redistribute it and/or modify
--  it under the terms of the GNU General Public License as published by
--  the Free Software Foundation, either version 3 of the License, or
--  (at your option) any later version.
--
--  This program is distributed in the hope that it will be useful,
--  but WITHOUT ANY WARRANTY; without even the implied warranty of
--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--  GNU General Public License for more details.
--
--  You should have received a copy of the GNU General Public License
--  along with this program.  If not, see <http://www.gnu.org/licenses/>.
--
 
 
 
-- as generated by the wizzard and added generic
-- used by altde2 board with Cyclone II
-- clock 2 is 180 degree phase shifted, but that's only
-- true when the frequency is set to 100 MHz (factor 5) 
 
LIBRARY ieee;
USE ieee.std_logic_1164.all;
 
LIBRARY altera_mf;
USE altera_mf.all;
 
ENTITY pll IS
	generic (multiply_by : natural; divide_by : natural);
	PORT
	(
		inclk0		: IN STD_LOGIC  := '0';
		c0		: OUT STD_LOGIC ;
		c1		: OUT STD_LOGIC ;
		locked		: OUT STD_LOGIC 
	);
END pll;
 
ARCHITECTURE SYN OF pll IS
 
	SIGNAL sub_wire0	: STD_LOGIC_VECTOR (5 DOWNTO 0);
	SIGNAL sub_wire1	: STD_LOGIC ;
	SIGNAL sub_wire2	: STD_LOGIC ;
	SIGNAL sub_wire3	: STD_LOGIC ;
	SIGNAL sub_wire4	: STD_LOGIC ;
	SIGNAL sub_wire5	: STD_LOGIC_VECTOR (1 DOWNTO 0);
	SIGNAL sub_wire6_bv	: BIT_VECTOR (0 DOWNTO 0);
	SIGNAL sub_wire6	: STD_LOGIC_VECTOR (0 DOWNTO 0);
 
 
 
	COMPONENT altpll
	GENERIC (
		clk0_divide_by		: NATURAL;
		clk0_duty_cycle		: NATURAL;
		clk0_multiply_by		: NATURAL;
		clk0_phase_shift		: STRING;
		clk1_divide_by		: NATURAL;
		clk1_duty_cycle		: NATURAL;
		clk1_multiply_by		: NATURAL;
		clk1_phase_shift		: STRING;
		compensate_clock		: STRING;
		gate_lock_signal		: STRING;
		inclk0_input_frequency		: NATURAL;
		intended_device_family		: STRING;
		invalid_lock_multiplier		: NATURAL;
		lpm_hint		: STRING;
		lpm_type		: STRING;
		operation_mode		: STRING;
		port_activeclock		: STRING;
		port_areset		: STRING;
		port_clkbad0		: STRING;
		port_clkbad1		: STRING;
		port_clkloss		: STRING;
		port_clkswitch		: STRING;
		port_configupdate		: STRING;
		port_fbin		: STRING;
		port_inclk0		: STRING;
		port_inclk1		: STRING;
		port_locked		: STRING;
		port_pfdena		: STRING;
		port_phasecounterselect		: STRING;
		port_phasedone		: STRING;
		port_phasestep		: STRING;
		port_phaseupdown		: STRING;
		port_pllena		: STRING;
		port_scanaclr		: STRING;
		port_scanclk		: STRING;
		port_scanclkena		: STRING;
		port_scandata		: STRING;
		port_scandataout		: STRING;
		port_scandone		: STRING;
		port_scanread		: STRING;
		port_scanwrite		: STRING;
		port_clk0		: STRING;
		port_clk1		: STRING;
		port_clk2		: STRING;
		port_clk3		: STRING;
		port_clk4		: STRING;
		port_clk5		: STRING;
		port_clkena0		: STRING;
		port_clkena1		: STRING;
		port_clkena2		: STRING;
		port_clkena3		: STRING;
		port_clkena4		: STRING;
		port_clkena5		: STRING;
		port_extclk0		: STRING;
		port_extclk1		: STRING;
		port_extclk2		: STRING;
		port_extclk3		: STRING;
		valid_lock_multiplier		: NATURAL
	);
	PORT (
			clk	: OUT STD_LOGIC_VECTOR (5 DOWNTO 0);
			inclk	: IN STD_LOGIC_VECTOR (1 DOWNTO 0);
			locked	: OUT STD_LOGIC 
	);
	END COMPONENT;
 
BEGIN
	sub_wire6_bv(0 DOWNTO 0) <= "0";
	sub_wire6    <= To_stdlogicvector(sub_wire6_bv);
	sub_wire3    <= sub_wire0(0);
	sub_wire1    <= sub_wire0(1);
	c1    <= sub_wire1;
	locked    <= sub_wire2;
	c0    <= sub_wire3;
	sub_wire4    <= inclk0;
	sub_wire5    <= sub_wire6(0 DOWNTO 0) & sub_wire4;
 
	altpll_component : altpll
	GENERIC MAP (
		clk0_divide_by => divide_by,
		clk0_duty_cycle => 50,
		clk0_multiply_by => multiply_by,
		clk0_phase_shift => "0",
		clk1_divide_by => divide_by,
		clk1_duty_cycle => 50,
		clk1_multiply_by => multiply_by,
		clk1_phase_shift => "5000", -- this is in ps, and shall be an inverted clock
		compensate_clock => "CLK0",
		gate_lock_signal => "NO",
		inclk0_input_frequency => 20000, -- 50 Mhz = 20000 ps
		intended_device_family => "Cyclone II",
		invalid_lock_multiplier => 5,
		lpm_hint => "CBX_MODULE_PREFIX=pll2",
		lpm_type => "altpll",
		operation_mode => "NORMAL",
		port_activeclock => "PORT_UNUSED",
		port_areset => "PORT_UNUSED",
		port_clkbad0 => "PORT_UNUSED",
		port_clkbad1 => "PORT_UNUSED",
		port_clkloss => "PORT_UNUSED",
		port_clkswitch => "PORT_UNUSED",
		port_configupdate => "PORT_UNUSED",
		port_fbin => "PORT_UNUSED",
		port_inclk0 => "PORT_USED",
		port_inclk1 => "PORT_UNUSED",
		port_locked => "PORT_USED",
		port_pfdena => "PORT_UNUSED",
		port_phasecounterselect => "PORT_UNUSED",
		port_phasedone => "PORT_UNUSED",
		port_phasestep => "PORT_UNUSED",
		port_phaseupdown => "PORT_UNUSED",
		port_pllena => "PORT_UNUSED",
		port_scanaclr => "PORT_UNUSED",
		port_scanclk => "PORT_UNUSED",
		port_scanclkena => "PORT_UNUSED",
		port_scandata => "PORT_UNUSED",
		port_scandataout => "PORT_UNUSED",
		port_scandone => "PORT_UNUSED",
		port_scanread => "PORT_UNUSED",
		port_scanwrite => "PORT_UNUSED",
		port_clk0 => "PORT_USED",
		port_clk1 => "PORT_USED",
		port_clk2 => "PORT_UNUSED",
		port_clk3 => "PORT_UNUSED",
		port_clk4 => "PORT_UNUSED",
		port_clk5 => "PORT_UNUSED",
		port_clkena0 => "PORT_UNUSED",
		port_clkena1 => "PORT_UNUSED",
		port_clkena2 => "PORT_UNUSED",
		port_clkena3 => "PORT_UNUSED",
		port_clkena4 => "PORT_UNUSED",
		port_clkena5 => "PORT_UNUSED",
		port_extclk0 => "PORT_UNUSED",
		port_extclk1 => "PORT_UNUSED",
		port_extclk2 => "PORT_UNUSED",
		port_extclk3 => "PORT_UNUSED",
		valid_lock_multiplier => 1
	)
	PORT MAP (
		inclk => sub_wire5,
		clk => sub_wire0,
		locked => sub_wire2
	);
 
 
 
END SYN;