URL
https://opencores.org/ocsvn/leros/leros/trunk
Subversion Repositories leros
[/] [leros/] [trunk/] [vhdl/] [altera/] [cyc2_pll.vhd] - Rev 8
Go to most recent revision | Compare with Previous | Blame | View Log
-- -- -- This file is a part of JOP, the Java Optimized Processor -- -- Copyright (C) 2001-2008, Martin Schoeberl (martin@jopdesign.com) -- -- This program is free software: you can redistribute it and/or modify -- it under the terms of the GNU General Public License as published by -- the Free Software Foundation, either version 3 of the License, or -- (at your option) any later version. -- -- This program is distributed in the hope that it will be useful, -- but WITHOUT ANY WARRANTY; without even the implied warranty of -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- GNU General Public License for more details. -- -- You should have received a copy of the GNU General Public License -- along with this program. If not, see <http://www.gnu.org/licenses/>. -- -- as generated by the wizzard and added generic -- used by altde2 board with Cyclone II -- clock 2 is 180 degree phase shifted, but that's only -- true when the frequency is set to 100 MHz (factor 5) LIBRARY ieee; USE ieee.std_logic_1164.all; LIBRARY altera_mf; USE altera_mf.all; ENTITY pll IS generic (multiply_by : natural; divide_by : natural); PORT ( inclk0 : IN STD_LOGIC := '0'; c0 : OUT STD_LOGIC ; c1 : OUT STD_LOGIC ; locked : OUT STD_LOGIC ); END pll; ARCHITECTURE SYN OF pll IS SIGNAL sub_wire0 : STD_LOGIC_VECTOR (5 DOWNTO 0); SIGNAL sub_wire1 : STD_LOGIC ; SIGNAL sub_wire2 : STD_LOGIC ; SIGNAL sub_wire3 : STD_LOGIC ; SIGNAL sub_wire4 : STD_LOGIC ; SIGNAL sub_wire5 : STD_LOGIC_VECTOR (1 DOWNTO 0); SIGNAL sub_wire6_bv : BIT_VECTOR (0 DOWNTO 0); SIGNAL sub_wire6 : STD_LOGIC_VECTOR (0 DOWNTO 0); COMPONENT altpll GENERIC ( clk0_divide_by : NATURAL; clk0_duty_cycle : NATURAL; clk0_multiply_by : NATURAL; clk0_phase_shift : STRING; clk1_divide_by : NATURAL; clk1_duty_cycle : NATURAL; clk1_multiply_by : NATURAL; clk1_phase_shift : STRING; compensate_clock : STRING; gate_lock_signal : STRING; inclk0_input_frequency : NATURAL; intended_device_family : STRING; invalid_lock_multiplier : NATURAL; lpm_hint : STRING; lpm_type : STRING; operation_mode : STRING; port_activeclock : STRING; port_areset : STRING; port_clkbad0 : STRING; port_clkbad1 : STRING; port_clkloss : STRING; port_clkswitch : STRING; port_configupdate : STRING; port_fbin : STRING; port_inclk0 : STRING; port_inclk1 : STRING; port_locked : STRING; port_pfdena : STRING; port_phasecounterselect : STRING; port_phasedone : STRING; port_phasestep : STRING; port_phaseupdown : STRING; port_pllena : STRING; port_scanaclr : STRING; port_scanclk : STRING; port_scanclkena : STRING; port_scandata : STRING; port_scandataout : STRING; port_scandone : STRING; port_scanread : STRING; port_scanwrite : STRING; port_clk0 : STRING; port_clk1 : STRING; port_clk2 : STRING; port_clk3 : STRING; port_clk4 : STRING; port_clk5 : STRING; port_clkena0 : STRING; port_clkena1 : STRING; port_clkena2 : STRING; port_clkena3 : STRING; port_clkena4 : STRING; port_clkena5 : STRING; port_extclk0 : STRING; port_extclk1 : STRING; port_extclk2 : STRING; port_extclk3 : STRING; valid_lock_multiplier : NATURAL ); PORT ( clk : OUT STD_LOGIC_VECTOR (5 DOWNTO 0); inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0); locked : OUT STD_LOGIC ); END COMPONENT; BEGIN sub_wire6_bv(0 DOWNTO 0) <= "0"; sub_wire6 <= To_stdlogicvector(sub_wire6_bv); sub_wire3 <= sub_wire0(0); sub_wire1 <= sub_wire0(1); c1 <= sub_wire1; locked <= sub_wire2; c0 <= sub_wire3; sub_wire4 <= inclk0; sub_wire5 <= sub_wire6(0 DOWNTO 0) & sub_wire4; altpll_component : altpll GENERIC MAP ( clk0_divide_by => divide_by, clk0_duty_cycle => 50, clk0_multiply_by => multiply_by, clk0_phase_shift => "0", clk1_divide_by => divide_by, clk1_duty_cycle => 50, clk1_multiply_by => multiply_by, clk1_phase_shift => "5000", -- this is in ps, and shall be an inverted clock compensate_clock => "CLK0", gate_lock_signal => "NO", inclk0_input_frequency => 20000, -- 50 Mhz = 20000 ps intended_device_family => "Cyclone II", invalid_lock_multiplier => 5, lpm_hint => "CBX_MODULE_PREFIX=pll2", lpm_type => "altpll", operation_mode => "NORMAL", port_activeclock => "PORT_UNUSED", port_areset => "PORT_UNUSED", port_clkbad0 => "PORT_UNUSED", port_clkbad1 => "PORT_UNUSED", port_clkloss => "PORT_UNUSED", port_clkswitch => "PORT_UNUSED", port_configupdate => "PORT_UNUSED", port_fbin => "PORT_UNUSED", port_inclk0 => "PORT_USED", port_inclk1 => "PORT_UNUSED", port_locked => "PORT_USED", port_pfdena => "PORT_UNUSED", port_phasecounterselect => "PORT_UNUSED", port_phasedone => "PORT_UNUSED", port_phasestep => "PORT_UNUSED", port_phaseupdown => "PORT_UNUSED", port_pllena => "PORT_UNUSED", port_scanaclr => "PORT_UNUSED", port_scanclk => "PORT_UNUSED", port_scanclkena => "PORT_UNUSED", port_scandata => "PORT_UNUSED", port_scandataout => "PORT_UNUSED", port_scandone => "PORT_UNUSED", port_scanread => "PORT_UNUSED", port_scanwrite => "PORT_UNUSED", port_clk0 => "PORT_USED", port_clk1 => "PORT_USED", port_clk2 => "PORT_UNUSED", port_clk3 => "PORT_UNUSED", port_clk4 => "PORT_UNUSED", port_clk5 => "PORT_UNUSED", port_clkena0 => "PORT_UNUSED", port_clkena1 => "PORT_UNUSED", port_clkena2 => "PORT_UNUSED", port_clkena3 => "PORT_UNUSED", port_clkena4 => "PORT_UNUSED", port_clkena5 => "PORT_UNUSED", port_extclk0 => "PORT_UNUSED", port_extclk1 => "PORT_UNUSED", port_extclk2 => "PORT_UNUSED", port_extclk3 => "PORT_UNUSED", valid_lock_multiplier => 1 ) PORT MAP ( inclk => sub_wire5, clk => sub_wire0, locked => sub_wire2 ); END SYN;
Go to most recent revision | Compare with Previous | Blame | View Log