Subversion Repositories lwrisc

/******************************************************************
 *                                                                * 
 *    Author: Liwei                                               * 
 *                                                                * 
 *    This file is part of the "ClaiRISC" project,                *
 *    The folder in CVS is named as "lwrisc"                      * 
 *    Downloaded from:                                            * 
 *    http://www.opencores.org/pdownloads.cgi/list/lwrisc         * 
 *                                                                * 
 *    If you encountered any problem, please contact me via       * 
 *    Email:mcupro@opencores.org  or mcupro@163.com               * 
 *                                                                * 
 ******************************************************************/
 
`include "clairisc_def.h"
`include "rom_set.h"
 
module com_prom (
        clk,
        rd_addr,
        dout
    );
    input		clk;
    input [10:0]	rd_addr;
    output [11:0]	dout;
 
`ifdef SIM		 
 
    sim_rom i_sim_ram(
                .address(rd_addr),
                .clock(clk),
                .q(dout)
            );
 
`else 
 
   `ROM_TYPE i_alt_ram (				
                .address(rd_addr),
               .clock(clk),
                .q(dout)
            );
 
`endif 				   
 
endmodule
 
module sim_reg_file (
        data,
        wren,
        wraddress,
        rdaddress,
        clock,
        q);
 
    input	[7:0]  data;
    input	  wren;
    input	[6:0]  wraddress;
    input	[6:0]  rdaddress;
    input	  clock;
    output	[7:0]  q;
 
    reg [7:0] membank[0:127];
 
    reg r_we;
    reg [6:0] r_rd_addr;
    reg [6:0] r_wr_addr;
    reg [6:0] r_data;
 
    always @ (posedge clock)
    begin
 
        r_rd_addr<=rdaddress;
        r_wr_addr<=wraddress;
        r_data<=data;
        r_we<=wren;
    end
 
    always  @(posedge clock)
        if (r_we)
            membank[r_wr_addr]<=r_data;
 
    assign q=((r_rd_addr==r_wr_addr)&&(r_we))?r_data:membank[r_rd_addr] ;
 
endmodule