Subversion Repositories mb-jpeg

/* $Id: xstatus.h,v 1.1 2006-06-23 18:59:00 quickwayne Exp $ */
/******************************************************************************
*
*       XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
*       AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
*       SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
*       OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
*       APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
*       THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
*       AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
*       FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
*       WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
*       IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
*       REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
*       INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
*       FOR A PARTICULAR PURPOSE.
*
*       (c) Copyright 2002 Xilinx Inc.
*       All rights reserved.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xstatus.h
*
* This file contains Xilinx software status codes.  Status codes have their
* own data type called XStatus.  These codes are used throughout the Xilinx
* device drivers.
*
******************************************************************************/
 
#ifndef XSTATUS_H    /* prevent circular inclusions */
#define XSTATUS_H    /* by using protection macros */
 
/***************************** Include Files *********************************/
 
#include "xbasic_types.h"
 
/************************** Constant Definitions *****************************/
 
/*********************** Common statuses 0 - 500 *****************************/
 
#define XST_SUCCESS                     0L
#define XST_FAILURE                     1L
#define XST_DEVICE_NOT_FOUND            2L
#define XST_DEVICE_BLOCK_NOT_FOUND      3L
#define XST_INVALID_VERSION             4L
#define XST_DEVICE_IS_STARTED           5L
#define XST_DEVICE_IS_STOPPED           6L
#define XST_FIFO_ERROR                  7L  /* an error occurred during an
                                               operation with a FIFO such as
                                               an underrun or overrun, this
                                               error requires the device to
                                               be reset */
#define XST_RESET_ERROR                 8L  /* an error occurred which requires
                                               the device to be reset */
#define XST_DMA_ERROR                   9L  /* a DMA error occurred, this error
                                               typically requires the device
                                               using the DMA to be reset */
#define XST_NOT_POLLED                  10L /* the device is not configured for
                                               polled mode operation */
#define XST_FIFO_NO_ROOM                11L /* a FIFO did not have room to put
                                               the specified data into */
#define XST_BUFFER_TOO_SMALL            12L /* the buffer is not large enough
                                               to hold the expected data */
#define XST_NO_DATA                     13L /* there was no data available */
#define XST_REGISTER_ERROR              14L /* a register did not contain the
                                               expected value */
#define XST_INVALID_PARAM               15L /* an invalid parameter was passed
                                               into the function */
#define XST_NOT_SGDMA                   16L /* the device is not configured for
                                               scatter-gather DMA operation */
#define XST_LOOPBACK_ERROR              17L /* a loopback test failed */
#define XST_NO_CALLBACK                 18L /* a callback has not yet been
                                               registered */
#define XST_NO_FEATURE                  19L /* device is not configured with
                                               the requested feature */
#define XST_NOT_INTERRUPT               20L /* device is not configured for
                                               interrupt mode operation */
#define XST_DEVICE_BUSY                 21L /* device is busy */
#define XST_ERROR_COUNT_MAX             22L /* the error counters of a device
                                               have maxed out */
#define XST_IS_STARTED                  23L /* used when part of device is
                                               already started i.e.
                                               sub channel */
#define XST_IS_STOPPED                  24L /* used when part of device is
                                               already stopped i.e.
                                               sub channel */
#define XST_DATA_LOST                   26L /* driver defined error */
#define XST_RECV_ERROR                  27L /* generic receive error */
#define XST_SEND_ERROR                  28L /* generic transmit error */
#define XST_NOT_ENABLED                 29L /* a requested service is not
                                               available because it has not
                                               been enabled */
 
/***************** Utility Component statuses 401 - 500  *********************/
 
#define XST_MEMTEST_FAILED              401L /* memory test failed */
 
 
/***************** Common Components statuses 501 - 1000 *********************/
 
/********************* Packet Fifo statuses 501 - 510 ************************/
 
#define XST_PFIFO_LACK_OF_DATA          501L   /* not enough data in FIFO   */
#define XST_PFIFO_NO_ROOM               502L   /* not enough room in FIFO   */
#define XST_PFIFO_BAD_REG_VALUE         503L   /* self test, a register value
                                                  was invalid after reset */
#define XST_PFIFO_ERROR                 504L   /* generic packet FIFO error */
#define XST_PFIFO_DEADLOCK              505L   /* packet FIFO is reporting
                                                * empty and full simultaneously
                                                */
 
/************************** DMA statuses 511 - 530 ***************************/
 
#define XST_DMA_TRANSFER_ERROR          511L /* self test, DMA transfer
                                                failed */
#define XST_DMA_RESET_REGISTER_ERROR    512L /* self test, a register value
                                                was invalid after reset */
#define XST_DMA_SG_LIST_EMPTY           513L /* scatter gather list contains
                                                no buffer descriptors ready
                                                to be processed */
#define XST_DMA_SG_IS_STARTED           514L /* scatter gather not stopped */
#define XST_DMA_SG_IS_STOPPED           515L /* scatter gather not running */
#define XST_DMA_SG_LIST_FULL            517L /* all the buffer desciptors of
                                                the scatter gather list are
                                                being used */
#define XST_DMA_SG_BD_LOCKED            518L /* the scatter gather buffer
                                                descriptor which is to be
                                                copied over in the scatter
                                                list is locked */
#define XST_DMA_SG_NOTHING_TO_COMMIT    519L /* no buffer descriptors have been
                                                put into the scatter gather
                                                list to be commited */
#define XST_DMA_SG_COUNT_EXCEEDED       521L /* the packet count threshold
                                                specified was larger than the
                                                total # of buffer descriptors
                                                in the scatter gather list */
#define XST_DMA_SG_LIST_EXISTS          522L /* the scatter gather list has
                                                already been created */
#define XST_DMA_SG_NO_LIST              523L /* no scatter gather list has
                                                been created */
#define XST_DMA_SG_BD_NOT_COMMITTED     524L /* the buffer descriptor which was
                                                being started was not committed
                                                to the list */
#define XST_DMA_SG_NO_DATA              525L /* the buffer descriptor to start
                                                has already been used by the
                                                hardware so it can't be reused
                                                */
#define XST_DMA_SG_LIST_ERROR           526L /* general purpose list access
                                                error */
#define XST_DMA_BD_ERROR                527L /* general buffer descriptor
                                                error */
 
/************************** IPIF statuses 531 - 550 ***************************/
 
#define XST_IPIF_REG_WIDTH_ERROR        531L /* an invalid register width
                                                was passed into the function */
#define XST_IPIF_RESET_REGISTER_ERROR   532L /* the value of a register at
                                                reset was not valid */
#define XST_IPIF_DEVICE_STATUS_ERROR    533L /* a write to the device interrupt
                                                status register did not read
                                                back correctly */
#define XST_IPIF_DEVICE_ACK_ERROR       534L /* the device interrupt status
                                                register did not reset when
                                                acked */
#define XST_IPIF_DEVICE_ENABLE_ERROR    535L /* the device interrupt enable
                                                register was not updated when
                                                other registers changed */
#define XST_IPIF_IP_STATUS_ERROR        536L /* a write to the IP interrupt
                                                status register did not read
                                                back correctly */
#define XST_IPIF_IP_ACK_ERROR           537L /* the IP interrupt status register
                                                did not reset when acked */
#define XST_IPIF_IP_ENABLE_ERROR        538L /* IP interrupt enable register was
                                                not updated correctly when other
                                                registers changed */
#define XST_IPIF_DEVICE_PENDING_ERROR   539L /* The device interrupt pending
                                                register did not indicate the
                                                expected value */
#define XST_IPIF_DEVICE_ID_ERROR        540L /* The device interrupt ID register
                                                did not indicate the expected
                                                value */
#define XST_IPIF_ERROR                  541L /* generic ipif error */
 
/****************** Device specific statuses 1001 - 4095 *********************/
 
/********************* Ethernet statuses 1001 - 1050 *************************/
 
#define XST_EMAC_MEMORY_SIZE_ERROR  1001L /* Memory space is not big enough
                                           * to hold the minimum number of
                                           * buffers or descriptors */
#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
#define XST_EMAC_MII_READ_ERROR     1003L /* MII read error */
#define XST_EMAC_MII_BUSY           1004L /* An MII operation is in progress */
#define XST_EMAC_OUT_OF_BUFFERS     1005L /* Adapter is out of buffers */
#define XST_EMAC_PARSE_ERROR        1006L /* Invalid adapter init string */
#define XST_EMAC_COLLISION_ERROR    1007L /* Excess deferral or late
                                           * collision on polled send */
 
/*********************** UART statuses 1051 - 1075 ***************************/
#define XST_UART
 
#define XST_UART_INIT_ERROR         1051L
#define XST_UART_START_ERROR        1052L
#define XST_UART_CONFIG_ERROR       1053L
#define XST_UART_TEST_FAIL          1054L
#define XST_UART_BAUD_ERROR         1055L
#define XST_UART_BAUD_RANGE         1056L
 
 
/************************ IIC statuses 1076 - 1100 ***************************/
 
#define XST_IIC_SELFTEST_FAILED         1076 /* self test failed            */
#define XST_IIC_BUS_BUSY                1077 /* bus found busy              */
#define XST_IIC_GENERAL_CALL_ADDRESS    1078 /* mastersend attempted with   */
                                             /* general call address        */
#define XST_IIC_STAND_REG_RESET_ERROR   1079 /* A non parameterizable reg   */
                                             /* value after reset not valid */
#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design  */
                                             /* value after reset not valid */
#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design  */
                                             /* value after reset not valid */
#define XST_IIC_TBA_REG_RESET_ERROR     1082 /* 10 bit addr incl in design  */
                                             /* value after reset not valid */
#define XST_IIC_CR_READBACK_ERROR       1083 /* Read of the control register*/
                                             /* didn't return value written */
#define XST_IIC_DTR_READBACK_ERROR      1084 /* Read of the data Tx reg     */
                                             /* didn't return value written */
#define XST_IIC_DRR_READBACK_ERROR      1085 /* Read of the data Receive reg*/
                                             /* didn't return value written */
#define XST_IIC_ADR_READBACK_ERROR      1086 /* Read of the data Tx reg     */
                                             /* didn't return value written */
#define XST_IIC_TBA_READBACK_ERROR      1087 /* Read of the 10 bit addr reg */
                                             /* didn't return written value */
#define XST_IIC_NOT_SLAVE               1088 /* The device isn't a slave    */
 
/*********************** ATMC statuses 1101 - 1125 ***************************/
 
#define XST_ATMC_ERROR_COUNT_MAX    1101L   /* the error counters in the ATM
                                               controller hit the max value
                                               which requires the statistics
                                               to be cleared */
 
/*********************** Flash statuses 1126 - 1150 **************************/
 
#define XST_FLASH_BUSY                1126L /* Flash is erasing or programming */
#define XST_FLASH_READY               1127L /* Flash is ready for commands */
#define XST_FLASH_ERROR               1128L /* Flash had detected an internal
                                               error. Use XFlash_DeviceControl
                                               to retrieve device specific codes */
#define XST_FLASH_ERASE_SUSPENDED     1129L /* Flash is in suspended erase state */
#define XST_FLASH_WRITE_SUSPENDED     1130L /* Flash is in suspended write state */
#define XST_FLASH_PART_NOT_SUPPORTED  1131L /* Flash type not supported by
                                               driver */
#define XST_FLASH_NOT_SUPPORTED       1132L /* Operation not supported */
#define XST_FLASH_TOO_MANY_REGIONS    1133L /* Too many erase regions */
#define XST_FLASH_TIMEOUT_ERROR       1134L /* Programming or erase operation
                                               aborted due to a timeout */
#define XST_FLASH_ADDRESS_ERROR       1135L /* Accessed flash outside its
                                               addressible range */
#define XST_FLASH_ALIGNMENT_ERROR     1136L /* Write alignment error */
#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from
                                               write/erase function with
                                               XFL_NON_BLOCKING_WRITE/ERASE
                                               option cleared */
#define XST_FLASH_CFI_QUERY_ERROR     1138L /* Failed to query the device */
 
/*********************** SPI statuses 1151 - 1175 ****************************/
 
#define XST_SPI_MODE_FAULT          1151 /* master was selected as slave */
#define XST_SPI_TRANSFER_DONE       1152 /* data transfer is complete */
#define XST_SPI_TRANSMIT_UNDERRUN   1153 /* slave underruns transmit register */
#define XST_SPI_RECEIVE_OVERRUN     1154 /* device overruns receive register */
#define XST_SPI_NO_SLAVE            1155 /* no slave has been selected yet */
#define XST_SPI_TOO_MANY_SLAVES     1156 /* more than one slave is being
                                          * selected */
#define XST_SPI_NOT_MASTER          1157 /* operation is valid only as master */
#define XST_SPI_SLAVE_ONLY          1158 /* device is configured as slave-only */
#define XST_SPI_SLAVE_MODE_FAULT    1159 /* slave was selected while disabled */
 
/********************** OPB Arbiter statuses 1176 - 1200 *********************/
 
#define XST_OPBARB_INVALID_PRIORITY  1176 /* the priority registers have either
                                           * one master assigned to two or more
                                           * priorities, or one master not
                                           * assigned to any priority
                                           */
#define XST_OPBARB_NOT_SUSPENDED     1177 /* an attempt was made to modify the
                                           * priority levels without first
                                           * suspending the use of priority
                                           * levels
                                           */
#define XST_OPBARB_PARK_NOT_ENABLED  1178 /* bus parking by id was enabled but
                                           * bus parking was not enabled
                                           */
#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
                                            * priority mode to allow the
                                            * priorities to be changed
                                            */
 
/************************ Intc statuses 1201 - 1225 **************************/
 
#define XST_INTC_FAIL_SELFTEST      1201        /* self test failed */
#define XST_INTC_CONNECT_ERROR      1202        /* interrupt already in use */
 
/********************** TmrCtr statuses 1226 - 1250 **************************/
 
#define XST_TMRCTR_TIMER_FAILED     1226        /* self test failed */
 
/********************** WdtTb statuses 1251 - 1275 ***************************/
 
#define XST_WDTTB_TIMER_FAILED      1251L
 
/********************** PlbArb statuses 1276 - 1300 **************************/
 
#define XST_PLBARB_FAIL_SELFTEST    1276L
 
/********************** Plb2Opb statuses 1301 - 1325 *************************/
 
#define XST_PLB2OPB_FAIL_SELFTEST   1301L
 
/********************** Opb2Plb statuses 1326 - 1350 *************************/
 
#define XST_OPB2PLB_FAIL_SELFTEST   1326L
 
/********************** SysAce statuses 1351 - 1360 **************************/
 
#define XST_SYSACE_NO_LOCK          1351L    /* No MPU lock has been granted */
 
/********************** PCI Bridge statuses 1361 - 1375 **********************/
 
#define XST_PCI_INVALID_ADDRESS     1361L
 
/**************************** Type Definitions *******************************/
 
/**
 * The status typedef.
 */
typedef Xuint32 XStatus;
 
/***************** Macros (Inline Functions) Definitions *********************/
 
 
/************************** Function Prototypes ******************************/
 
 
#endif              /* end of protection macro */