URL
https://opencores.org/ocsvn/mblite/mblite/trunk
Subversion Repositories mblite
[/] [mblite/] [trunk/] [designs/] [core_decoder/] [testbench.vhd] - Rev 11
Go to most recent revision | Compare with Previous | Blame | View Log
---------------------------------------------------------------------------------------------- -- -- Input file : config_Pkg.vhd -- Design name : config_Pkg -- Author : Tamar Kranenburg -- Company : Delft University of Technology -- : Faculty EEMCS, Department ME&CE -- : Systems and Circuits group -- -- Description : Testbench which instantiates instruction memory, data memory, -- core, core address decoder and stdio -- ---------------------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; library mblite; use mblite.config_Pkg.all; use mblite.core_Pkg.all; use mblite.std_Pkg.all; entity testbench is end testbench; architecture arch of testbench is component mblite_stdio is port ( dmem_i : out dmem_in_type; dmem_o : in dmem_out_type; clk_i : in std_logic ); end component; signal dmem_o : dmem_out_type; signal dmem_i : dmem_in_type; signal imem_o : imem_out_type; signal imem_i : imem_in_type; signal s_dmem_o : dmem_out_array_type(CFG_NUM_SLAVES - 1 downto 0); signal s_dmem_i : dmem_in_array_type(CFG_NUM_SLAVES - 1 downto 0); signal sys_clk_i : std_logic := '0'; signal sys_int_i : std_logic; signal sys_rst_i : std_logic; constant rom_size : integer := 16; constant ram_size : integer := 16; signal sel_o : std_logic_vector(3 downto 0); signal ena_o : std_logic; BEGIN sys_clk_i <= not sys_clk_i after 10000 ps; sys_rst_i <= '1' after 0 ps, '0' after 150000 ps; sys_int_i <= '1' after 500000000 ps, '0' after 500040000 ps; -- Warning: an infinite loop like while(1) {} triggers this timeout too! -- disable this feature when a premature finish occur. timeout: process(sys_clk_i) begin if NOW = 10 ms then report "TIMEOUT" severity FAILURE; end if; -- BREAK ON EXIT (0xB8000000) if compare(imem_i.dat_i, "10111000000000000000000000000000") = '1' then -- Make sure the simulator finishes when an error is encountered. -- For modelsim: see menu Simulate -> Runtime options -> Assertions report "FINISHED" severity FAILURE; end if; end process; stdio : mblite_stdio port map ( dmem_i => s_dmem_i(1), dmem_o => s_dmem_o(1), clk_i => sys_clk_i ); s_dmem_i(0).ena_i <= '1'; sel_o <= s_dmem_o(0).sel_o when s_dmem_o(0).we_o = '1' else (others => '0'); ena_o <= not sys_rst_i and s_dmem_o(0).ena_o; dmem : sram_4en generic map ( WIDTH => CFG_DMEM_WIDTH, SIZE => ram_size - 2 ) port map ( dat_o => s_dmem_i(0).dat_i, dat_i => s_dmem_o(0).dat_o, adr_i => s_dmem_o(0).adr_o(ram_size - 1 downto 2), wre_i => sel_o, ena_i => ena_o, clk_i => sys_clk_i ); decoder : core_address_decoder generic map ( G_NUM_SLAVES => CFG_NUM_SLAVES ) port map ( m_dmem_i => dmem_i, s_dmem_o => s_dmem_o, m_dmem_o => dmem_o, s_dmem_i => s_dmem_i, clk_i => sys_clk_i ); imem : sram generic map ( WIDTH => CFG_IMEM_WIDTH, SIZE => rom_size - 2 ) port map ( dat_o => imem_i.dat_i, dat_i => "00000000000000000000000000000000", adr_i => imem_o.adr_o(rom_size - 1 downto 2), wre_i => '0', ena_i => imem_o.ena_o, clk_i => sys_clk_i ); core0 : core port map ( imem_o => imem_o, dmem_o => dmem_o, imem_i => imem_i, dmem_i => dmem_i, int_i => sys_int_i, rst_i => sys_rst_i, clk_i => sys_clk_i ); end arch;
Go to most recent revision | Compare with Previous | Blame | View Log