Subversion Repositories mblite

----------------------------------------------------------------------------------------------
--
--      Input file         : config_Pkg.vhd
--      Design name        : config_Pkg
--      Author             : Tamar Kranenburg
--      Company            : Delft University of Technology
--                         : Faculty EEMCS, Department ME&CE
--                         : Systems and Circuits group
--
--      Description        : Testbench instantiates data and instruction memories, core, 
--                           core address decoder, wishbone adapter and wishbone stdio
--
----------------------------------------------------------------------------------------------
 
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.std_logic_unsigned.ALL;
 
LIBRARY mblite;
USE mblite.config_Pkg.ALL;
USE mblite.core_Pkg.ALL;
USE mblite.std_Pkg.ALL;
 
ENTITY testbench IS
END testbench;
 
ARCHITECTURE arch OF testbench IS
 
    COMPONENT wb_stdio IS PORT
    (
        wb_o : OUT wb_slv_out_type;
        wb_i : IN wb_slv_in_type
    );
    END COMPONENT;
 
    SIGNAL dmem_o : dmem_out_type;
    SIGNAL dmem_i : dmem_in_type;
    SIGNAL imem_o : imem_out_type;
    SIGNAL imem_i : imem_in_type;
    SIGNAL s_dmem_o : dmem_out_array_type(CFG_NUM_SLAVES - 1 DOWNTO 0);
    SIGNAL s_dmem_i : dmem_in_array_type(CFG_NUM_SLAVES - 1 DOWNTO 0);
 
    SIGNAL m_wb_i : wb_mst_in_type;
    SIGNAL m_wb_o : wb_mst_out_type;
    SIGNAL s_wb_i : wb_slv_in_type;
    SIGNAL s_wb_o : wb_slv_out_type;
 
    SIGNAL sys_clk_i : std_ulogic := '0';
    SIGNAL sys_int_i : std_ulogic;
    SIGNAL sys_rst_i : std_ulogic;
 
    CONSTANT rom_size : integer := 16;
    CONSTANT ram_size : integer := 16;
 
    SIGNAL sel_o : std_ulogic_vector(3 DOWNTO 0);
    SIGNAL ena_o : std_ulogic;
 
BEGIN
 
    sys_clk_i <= NOT sys_clk_i AFTER 10000 ps;
    sys_rst_i <= '1' AFTER 0 ps, '0' AFTER  150000 ps;
    sys_int_i <= '1' AFTER 500000000 ps, '0' after 500040000 ps;
 
    -- Warning: an infinite loop like while(1) {} triggers this timeout too!
    -- disable this feature when a premature finish occur.
    timeout: PROCESS(sys_clk_i)
    BEGIN
        IF NOW = 10 ms THEN
            REPORT "TIMEOUT" SEVERITY FAILURE;
        END IF;
        -- BREAK ON EXIT (0xB8000000)
        IF compare(imem_i.dat_i, "10111000000000000000000000000000") = '1' THEN
            -- Make sure the simulator finishes when an error is encountered.
            -- For modelsim: see menu Simulate -> Runtime options -> Assertions
            REPORT "FINISHED" SEVERITY FAILURE;
        END IF;
    END PROCESS;
 
    s_wb_i.clk_i <= sys_clk_i;
    s_wb_i.rst_i <= sys_rst_i;
    s_wb_i.adr_i <= m_wb_o.adr_o;
    s_wb_i.dat_i <= m_wb_o.dat_o;
    s_wb_i.we_i  <= m_wb_o.we_o;
    s_wb_i.stb_i <= m_wb_o.stb_o;
    s_wb_i.sel_i <= m_wb_o.sel_o;
    s_wb_i.cyc_i <= m_wb_o.cyc_o;
 
    m_wb_i.clk_i <= sys_clk_i;
    m_wb_i.rst_i <= sys_rst_i;
    m_wb_i.dat_i <= s_wb_o.dat_o;
    m_wb_i.ack_i <= s_wb_o.ack_o;
    m_wb_i.int_i <= s_wb_o.int_o;
 
    stdio : wb_stdio PORT MAP
    (
        wb_i  => s_wb_i,
        wb_o  => s_wb_o
    );
 
    wb_adapter : core_wb_adapter PORT MAP
    (
        dmem_i => s_dmem_i(1),
        wb_o   => m_wb_o,
        dmem_o => s_dmem_o(1),
        wb_i   => m_wb_i
    );
 
    s_dmem_i(0).ena_i <= '1';
    sel_o <= s_dmem_o(0).sel_o WHEN s_dmem_o(0).we_o = '1' ELSE (OTHERS => '0');
    ena_o <= NOT sys_rst_i AND s_dmem_o(0).ena_o;
 
    dmem : sram_4en GENERIC MAP
    (
        WIDTH => CFG_DMEM_WIDTH,
        SIZE => ram_size - 2
    )
    PORT MAP
    (
        dat_o => s_dmem_i(0).dat_i,
        dat_i => s_dmem_o(0).dat_o,
        adr_i => s_dmem_o(0).adr_o(ram_size - 1 DOWNTO 2),
        wre_i => sel_o,
        ena_i => ena_o,
        clk_i => sys_clk_i
    );
 
    decoder : core_address_decoder GENERIC MAP
    (
        G_NUM_SLAVES => CFG_NUM_SLAVES
    )
    PORT MAP
    (
        m_dmem_i => dmem_i,
        s_dmem_o => s_dmem_o,
        m_dmem_o => dmem_o,
        s_dmem_i => s_dmem_i,
        clk_i    => sys_clk_i
    );
 
    imem : sram GENERIC MAP
    (
        WIDTH => CFG_IMEM_WIDTH,
        SIZE => rom_size - 2
    )
    PORT MAP
    (
        dat_o => imem_i.dat_i,
        dat_i => "00000000000000000000000000000000",
        adr_i => imem_o.adr_o(rom_size - 1 DOWNTO 2),
        wre_i => '0',
        ena_i => imem_o.ena_o,
        clk_i => sys_clk_i
    );
 
    core0 : core PORT MAP
    (
        imem_o => imem_o,
        dmem_o => dmem_o,
        imem_i => imem_i,
        dmem_i => dmem_i,
        int_i  => sys_int_i,
        rst_i  => sys_rst_i,
        clk_i  => sys_clk_i
    );
 
END arch;