URL
https://opencores.org/ocsvn/microprocessor/microprocessor/trunk
Subversion Repositories microprocessor
[/] [microprocessor/] [trunk/] [rtl/] [verilog/] [spi_top.v] - Rev 2
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// spi_top.v //// //// //// //// This file is part of the SPI IP core project //// //// http://www.opencores.org/projects/spi/ //// //// //// //// Author(s): //// //// - Simon Srot (simons@opencores.org) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2002 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `include "spi_defines.v" `include "timescale.v" module spi_top ( // Wishbone signals wb_clk_i, wb_rst_i, wb_adr_i, wb_dat_i, wb_dat_o, wb_sel_i, wb_we_i, wb_stb_i, wb_cyc_i, wb_ack_o, wb_err_o, wb_int_o, // SPI signals ss_pad_o, sclk_pad_o, mosi_pad_o, miso_pad_i ); parameter Tp = 1; // Wishbone signals input wb_clk_i; // master clock input input wb_rst_i; // synchronous active high reset input [4:0] wb_adr_i; // lower address bits input [32-1:0] wb_dat_i; // databus input output [32-1:0] wb_dat_o; // databus output input [3:0] wb_sel_i; // byte select inputs input wb_we_i; // write enable input input wb_stb_i; // stobe/core select signal input wb_cyc_i; // valid bus cycle input output wb_ack_o; // bus cycle acknowledge output output wb_err_o; // termination w/ error output wb_int_o; // interrupt request signal output // SPI signals output [`SPI_SS_NB-1:0] ss_pad_o; // slave select output sclk_pad_o; // serial clock output mosi_pad_o; // master out slave in input miso_pad_i; // master in slave out reg [32-1:0] wb_dat_o; reg wb_ack_o; reg wb_int_o; // Internal signals reg [`SPI_DIVIDER_LEN-1:0] divider; // Divider register reg [`SPI_CTRL_BIT_NB-1:0] ctrl; // Control and status register reg [`SPI_SS_NB-1:0] ss; // Slave select register reg [32-1:0] wb_dat; // wb data out wire [`SPI_MAX_CHAR-1:0] rx; // Rx register wire rx_negedge; // miso is sampled on negative edge wire tx_negedge; // mosi is driven on negative edge wire [`SPI_CHAR_LEN_BITS-1:0] char_len; // char len wire go; // go wire lsb; // lsb first on line wire ie; // interrupt enable wire ass; // automatic slave select wire spi_divider_sel; // divider register select wire spi_ctrl_sel; // ctrl register select wire [3:0] spi_tx_sel; // tx_l register select wire spi_ss_sel; // ss register select wire tip; // transfer in progress wire pos_edge; // recognize posedge of sclk wire neg_edge; // recognize negedge of sclk wire last_bit; // marks last character bit // Address decoder assign spi_divider_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_DEVIDE); assign spi_ctrl_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_CTRL); assign spi_tx_sel[0] = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_TX_0); assign spi_tx_sel[1] = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_TX_1); assign spi_tx_sel[2] = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_TX_2); assign spi_tx_sel[3] = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_TX_3); assign spi_ss_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_SS); // Read from registers always @(wb_adr_i or rx or ctrl or divider or ss) begin case (wb_adr_i[`SPI_OFS_BITS]) `ifdef SPI_MAX_CHAR_128 `SPI_RX_0: wb_dat = rx[31:0]; `SPI_RX_1: wb_dat = rx[63:32]; `SPI_RX_2: wb_dat = rx[95:64]; `SPI_RX_3: wb_dat = {{128-`SPI_MAX_CHAR{1'b0}}, rx[`SPI_MAX_CHAR-1:96]}; `else `ifdef SPI_MAX_CHAR_64 `SPI_RX_0: wb_dat = rx[31:0]; `SPI_RX_1: wb_dat = {{64-`SPI_MAX_CHAR{1'b0}}, rx[`SPI_MAX_CHAR-1:32]}; `SPI_RX_2: wb_dat = 32'b0; `SPI_RX_3: wb_dat = 32'b0; `else `SPI_RX_0: wb_dat = {{32-`SPI_MAX_CHAR{1'b0}}, rx[`SPI_MAX_CHAR-1:0]}; `SPI_RX_1: wb_dat = 32'b0; `SPI_RX_2: wb_dat = 32'b0; `SPI_RX_3: wb_dat = 32'b0; `endif `endif `SPI_CTRL: wb_dat = {{32-`SPI_CTRL_BIT_NB{1'b0}}, ctrl}; `SPI_DEVIDE: wb_dat = {{32-`SPI_DIVIDER_LEN{1'b0}}, divider}; `SPI_SS: wb_dat = {{32-`SPI_SS_NB{1'b0}}, ss}; default: wb_dat = 32'bx; endcase end // Wb data out always @(posedge wb_clk_i or posedge wb_rst_i) begin if (wb_rst_i) wb_dat_o <= #Tp 32'b0; else wb_dat_o <= #Tp wb_dat; end // Wb acknowledge always @(posedge wb_clk_i or posedge wb_rst_i) begin if (wb_rst_i) wb_ack_o <= #Tp 1'b0; else wb_ack_o <= #Tp wb_cyc_i & wb_stb_i & ~wb_ack_o; end // Wb error assign wb_err_o = 1'b0; // Interrupt always @(posedge wb_clk_i or posedge wb_rst_i) begin if (wb_rst_i) wb_int_o <= #Tp 1'b0; else if (ie && tip && last_bit && pos_edge) wb_int_o <= #Tp 1'b1; else if (wb_ack_o) wb_int_o <= #Tp 1'b0; end // Divider register always @(posedge wb_clk_i or posedge wb_rst_i) begin if (wb_rst_i) divider <= #Tp {`SPI_DIVIDER_LEN{1'b0}}; else if (spi_divider_sel && wb_we_i && !tip) begin `ifdef SPI_DIVIDER_LEN_8 if (wb_sel_i[0]) divider <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:0]; `endif `ifdef SPI_DIVIDER_LEN_16 if (wb_sel_i[0]) divider[7:0] <= #Tp wb_dat_i[7:0]; if (wb_sel_i[1]) divider[`SPI_DIVIDER_LEN-1:8] <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:8]; `endif `ifdef SPI_DIVIDER_LEN_24 if (wb_sel_i[0]) divider[7:0] <= #Tp wb_dat_i[7:0]; if (wb_sel_i[1]) divider[15:8] <= #Tp wb_dat_i[15:8]; if (wb_sel_i[2]) divider[`SPI_DIVIDER_LEN-1:16] <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:16]; `endif `ifdef SPI_DIVIDER_LEN_32 if (wb_sel_i[0]) divider[7:0] <= #Tp wb_dat_i[7:0]; if (wb_sel_i[1]) divider[15:8] <= #Tp wb_dat_i[15:8]; if (wb_sel_i[2]) divider[23:16] <= #Tp wb_dat_i[23:16]; if (wb_sel_i[3]) divider[`SPI_DIVIDER_LEN-1:24] <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:24]; `endif end end // Ctrl register always @(posedge wb_clk_i or posedge wb_rst_i) begin if (wb_rst_i) ctrl <= #Tp {`SPI_CTRL_BIT_NB{1'b0}}; else if(spi_ctrl_sel && wb_we_i && !tip) begin if (wb_sel_i[0]) ctrl[7:0] <= #Tp wb_dat_i[7:0] | {7'b0, ctrl[0]}; if (wb_sel_i[1]) ctrl[`SPI_CTRL_BIT_NB-1:8] <= #Tp wb_dat_i[`SPI_CTRL_BIT_NB-1:8]; end else if(tip && last_bit && pos_edge) ctrl[`SPI_CTRL_GO] <= #Tp 1'b0; end assign rx_negedge = ctrl[`SPI_CTRL_RX_NEGEDGE]; assign tx_negedge = ctrl[`SPI_CTRL_TX_NEGEDGE]; assign go = ctrl[`SPI_CTRL_GO]; assign char_len = ctrl[`SPI_CTRL_CHAR_LEN]; assign lsb = ctrl[`SPI_CTRL_LSB]; assign ie = ctrl[`SPI_CTRL_IE]; assign ass = ctrl[`SPI_CTRL_ASS]; // Slave select register always @(posedge wb_clk_i or posedge wb_rst_i) begin if (wb_rst_i) ss <= #Tp {`SPI_SS_NB{1'b0}}; else if(spi_ss_sel && wb_we_i && !tip) begin `ifdef SPI_SS_NB_8 if (wb_sel_i[0]) ss <= #Tp wb_dat_i[`SPI_SS_NB-1:0]; `endif `ifdef SPI_SS_NB_16 if (wb_sel_i[0]) ss[7:0] <= #Tp wb_dat_i[7:0]; if (wb_sel_i[1]) ss[`SPI_SS_NB-1:8] <= #Tp wb_dat_i[`SPI_SS_NB-1:8]; `endif `ifdef SPI_SS_NB_24 if (wb_sel_i[0]) ss[7:0] <= #Tp wb_dat_i[7:0]; if (wb_sel_i[1]) ss[15:8] <= #Tp wb_dat_i[15:8]; if (wb_sel_i[2]) ss[`SPI_SS_NB-1:16] <= #Tp wb_dat_i[`SPI_SS_NB-1:16]; `endif `ifdef SPI_SS_NB_32 if (wb_sel_i[0]) ss[7:0] <= #Tp wb_dat_i[7:0]; if (wb_sel_i[1]) ss[15:8] <= #Tp wb_dat_i[15:8]; if (wb_sel_i[2]) ss[23:16] <= #Tp wb_dat_i[23:16]; if (wb_sel_i[3]) ss[`SPI_SS_NB-1:24] <= #Tp wb_dat_i[`SPI_SS_NB-1:24]; `endif end end assign ss_pad_o = ~((ss & {`SPI_SS_NB{tip & ass}}) | (ss & {`SPI_SS_NB{!ass}})); spi_clgen clgen (.clk_in(wb_clk_i), .rst(wb_rst_i), .go(go), .enable(tip), .last_clk(last_bit), .divider(divider), .clk_out(sclk_pad_o), .pos_edge(pos_edge), .neg_edge(neg_edge)); spi_shift shift (.clk(wb_clk_i), .rst(wb_rst_i), .len(char_len[`SPI_CHAR_LEN_BITS-1:0]), .latch(spi_tx_sel[3:0] & {4{wb_we_i}}), .byte_sel(wb_sel_i), .lsb(lsb), .go(go), .pos_edge(pos_edge), .neg_edge(neg_edge), .rx_negedge(rx_negedge), .tx_negedge(tx_negedge), .tip(tip), .last(last_bit), .p_in(wb_dat_i), .p_out(rx), .s_clk(sclk_pad_o), .s_in(miso_pad_i), .s_out(mosi_pad_o)); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log