URL
https://opencores.org/ocsvn/minimips_superscalar/minimips_superscalar/trunk
Subversion Repositories minimips_superscalar
[/] [minimips_superscalar/] [tags/] [P1/] [sources/] [syscop.vhd] - Rev 40
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------------ -- -- -- Copyright (c) 2004, Hangouet Samuel -- -- , Jan Sebastien -- -- , Mouton Louis-Marie -- -- , Schneider Olivier all rights reserved -- -- -- -- This file is part of miniMIPS. -- -- -- -- miniMIPS is free software; you can redistribute it and/or modify -- -- it under the terms of the GNU General Public License as published by -- -- the Free Software Foundation; either version 2 of the License, or -- -- (at your option) any later version. -- -- -- -- miniMIPS is distributed in the hope that it will be useful, -- -- but WITHOUT ANY WARRANTY; without even the implied warranty of -- -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- -- GNU General Public License for more details. -- -- -- -- You should have received a copy of the GNU General Public License -- -- along with miniMIPS; if not, write to the Free Software -- -- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -- -- -- ------------------------------------------------------------------------------------ -- If you encountered any problem, please contact : -- -- lmouton@enserg.fr -- oschneid@enserg.fr -- shangoue@enserg.fr -- -------------------------------------------------------------------------- -- -- -- -- -- miniMIPS Processor : Coprocessor system (cop0) -- -- -- -- -- -- -- -- Authors : Hangouet Samuel -- -- Jan Sébastien -- -- Mouton Louis-Marie -- -- Schneider Olivier -- -- -- -- june 2003 -- -------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use IEEE.numeric_std.all; library work; use work.pack_mips.all; -- By convention in the commentary, the term interruption means hardware interruptions and software exceptions entity syscop is port ( clock : in std_logic; clock2 : in std_logic; reset : in std_logic; -- Datas from the pipeline MEM_adr : in bus32; -- Address (PC) of the current instruction in the pipeline end -> responsible of the exception MEM_exc_cause : in bus32; -- Potential cause exception of that instruction MEM_it_ok : in std_logic; -- Allow hardware interruptions -- Hardware interruption it_mat : in std_logic; -- Hardware interruption detected -- Interruption controls interrupt : out std_logic; -- Interruption to take into account vecteur_it : out bus32; -- Interruption vector -- Writing request in register bank write_data : in bus32; -- Data to write write_adr : in bus5; -- Address of the register to write write_SCP : in std_logic; -- Writing request -- Reading request in register bank read_adr1 : in bus5; -- Address of the first register read_adr2 : in bus5; -- Address of the second register read_data1 : out bus32; -- Value of register 1 read_data2 : out bus32; -- Value of register 2 --mod -- Datas from the pipeline MEM_adr2 : in bus32; -- Address of the current instruction in the pipeline end -> responsible of the exception MEM_exc_cause2 : in bus32; -- Potential cause exception of that instruction MEM_it_ok2 : in std_logic; -- Allow hardware interruptions -- Hardware interruption it_mat2 : in std_logic; -- Hardware interruption detected -- Interruption controls interrupt2 : out std_logic; -- Interruption to take into account vecteur_it2 : out bus32; -- Interruption vector -- Writing request in register bank write_data2 : in bus32; -- Data to write write_adr2 : in bus5; -- Address of the register to write write_SCP2 : in std_logic; -- Writing request -- Reading request in register bank read_adr3 : in bus5; -- Address of the 3th register read_adr4 : in bus5; -- Address of the 4th register read_data3 : out bus32; -- Value of register 3 read_data4 : out bus32 -- Value of register 4 ); end syscop; architecture rtl of syscop is subtype adr_scp_reg is integer range 12 to 15; type scp_reg_type is array (integer range adr_scp_reg'low to adr_scp_reg'high) of bus32; -- Constants to define the coprocessor registers constant COMMAND : integer := 0; -- False register to command the coprocessor system constant STATUS : adr_scp_reg := 12; -- Registre 12 of the coprocessor system constant CAUSE : adr_scp_reg := 13; -- Registre 13 of the coprocessor system constant ADRESSE : adr_scp_reg := 14; -- Registre 14 of the coprocessor system constant VECTIT : adr_scp_reg := 15; -- Registre 15 of the coprocessor system signal scp_reg : scp_reg_type; -- Internal register bank signal pre_reg : scp_reg_type; -- Register bank preparation signal scp_reg2 : scp_reg_type; -- Internal register bank signal pre_reg2 : scp_reg_type; -- Register bank preparation signal adr_src1 : integer range 0 to 31; signal adr_src2 : integer range 0 to 31; signal adr_dest : integer range 0 to 31; --mod signal adr_src3 : integer range 0 to 31; signal adr_src4 : integer range 0 to 31; signal adr_dest2 : integer range 0 to 31; --fim mod signal exception, exception2 : std_logic; -- Set to '1' when exception detected *** quando MEM_exc_cause for diferente de IT_NOEXC signal interruption, interruption2 : std_logic; -- Set to '1' when interruption detected signal cmd_itret, cmd_itret2 : std_logic; -- Set to '1' when interruption return command is detected signal save_msk, save_msk2 : std_logic; -- Save the mask state when an interruption occurs begin -- Detection of the interruptions exception <= '1' when MEM_exc_cause/=IT_NOEXC else '0'; -- *** chegou uma instrucao ilegal ou break ou syscall *** interruption <= '1' when it_mat='1' and scp_reg(STATUS)(0)='1' and MEM_it_ok='1' else '0'; exception2 <= '1' when MEM_exc_cause2/=IT_NOEXC else '0'; -- *** chegou uma instrucao ilegal ou break ou syscall *** interruption2 <= '1' when it_mat2='1' and scp_reg2(STATUS)(0)='1' and MEM_it_ok2='1' else '0'; -- Update asynchronous outputs interrupt <= exception or interruption; -- Detection of interruptions vecteur_it <= scp_reg(ADRESSE) when cmd_itret = '1' else -- Send the return adress when a return instruction appears -- *** retorno de uma instrucao ilegal ou break ou syscall *** scp_reg(VECTIT); -- Send the interruption vector in other cases interrupt2 <= exception2 or interruption2; -- Detection of interruptions vecteur_it2 <= scp_reg2(ADRESSE) when cmd_itret2 = '1' else -- Send the return adress when a return instruction appears -- *** retorno de uma instrucao ilegal ou break ou syscall *** scp_reg2(VECTIT); -- Send the interruption vector in other cases -- Decode the address of the registers adr_src1 <= to_integer(unsigned(read_adr1)); adr_src2 <= to_integer(unsigned(read_adr2)); adr_dest <= to_integer(unsigned(write_adr)); --mod adr_src3 <= to_integer(unsigned(read_adr3)); adr_src4 <= to_integer(unsigned(read_adr4)); adr_dest2 <= to_integer(unsigned(write_adr2)); --fim mod -- Read the two registers read_data1 <= (others => '0') when (adr_src1<scp_reg'low or adr_src1>scp_reg'high) else scp_reg(adr_src1); read_data2 <= (others => '0') when (adr_src2<scp_reg'low or adr_src2>scp_reg'high) else scp_reg(adr_src2); --mod -- Read the two registers read_data3 <= (others => '0') when (adr_src3<scp_reg'low or adr_src3>scp_reg'high) else scp_reg(adr_src3); read_data4 <= (others => '0') when (adr_src4<scp_reg'low or adr_src4>scp_reg'high) else -- erro de copia e cola scp_reg(adr_src4); -- arrumado em 04\12\17 --fim mod -- Define the pre_reg signal, next value for the registers process (scp_reg, scp_reg2, adr_dest, write_SCP, write_data, interruption, exception, interruption2, exception2, MEM_exc_cause, MEM_adr, reset, adr_dest2, write_SCP2, write_data2, MEM_exc_cause2, MEM_adr2) begin -- *** exception eh um sinal interno e tambem pode ser tratado em um processo *** -- pre_reg <= scp_reg; cmd_itret <= '0'; -- No IT return in most cases pre_reg2 <= scp_reg2; cmd_itret2 <= '0'; -- No IT return in most cases -- Potential writing in a register if (write_SCP='1' and adr_dest>=pre_reg'low and adr_dest<=pre_reg'high) then pre_reg(adr_dest) <= write_data; end if; --mod -- Potential writing in a register from 2nd pipe if (write_SCP2='1' and adr_dest2>=pre_reg2'low and adr_dest2<=pre_reg2'high) then pre_reg2(adr_dest2) <= write_data2; end if; --fim mod -- Command from the core P1 if write_SCP='1' and adr_dest=COMMAND then case write_data is -- Different operations when SYS_UNMASK => pre_reg(STATUS)(0) <= '1'; -- Unamsk command when SYS_MASK => pre_reg(STATUS)(0) <= '0'; -- Mask command when SYS_ITRET => -- Interruption return command pre_reg(STATUS)(0) <= save_msk; -- Restore the mask before the interruption cmd_itret <= '1'; -- False interruption request (to clear the pipeline) when others => null; end case; end if; -- Modifications from the interruptions if interruption='1' then pre_reg(STATUS)(0) <= '0'; -- Mask the interruptions pre_reg(CAUSE) <= IT_ITMAT; -- Save the interruption cause pre_reg(ADRESSE) <= MEM_adr; -- Save the return address end if; -- Modifications from the exceptions if exception='1' then -- *** chegou uma instrucao ilegal ou break ou syscall *** pre_reg(STATUS)(0) <= '0'; -- Mask the interruptions pre_reg(CAUSE) <= MEM_exc_cause; -- Save the exception cause pre_reg(ADRESSE) <= MEM_adr; -- Save the return address end if; -- Command from the core P2 if write_SCP2='1' and adr_dest2=COMMAND then case write_data2 is -- Different operations when SYS_UNMASK => pre_reg2(STATUS)(0) <= '1'; -- Unamsk command when SYS_MASK => pre_reg2(STATUS)(0) <= '0'; -- Mask command when SYS_ITRET => -- Interruption return command pre_reg2(STATUS)(0) <= save_msk2; -- Restore the mask before the interruption cmd_itret2 <= '1'; -- False interruption request (to clear the pipeline) when others => null; end case; end if; -- Modifications from the interruptions if interruption2='1' then pre_reg2(STATUS)(0) <= '0'; -- Mask the interruptions pre_reg2(CAUSE) <= IT_ITMAT; -- Save the interruption cause pre_reg2(ADRESSE) <= MEM_adr2; -- Save the return address end if; -- Modifications from the exceptions if exception2='1' then -- *** chegou uma instrucao ilegal ou break ou syscall *** pre_reg2(STATUS)(0) <= '0'; -- Mask the interruptions pre_reg2(CAUSE) <= MEM_exc_cause2; -- Save the exception cause pre_reg2(ADRESSE) <= MEM_adr2; -- Save the return address end if; -- The reset has the priority on the other cuases if reset='1' then pre_reg <= (others => (others => '0')); pre_reg2 <= (others => (others => '0')); -- NB : The processor is masked after a reset -- The exception handler is set at address 0 end if; end process; -- Memorisation of the modifications in the register bank process(clock) begin if clock='1' and clock'event then -- Save the mask when an interruption appears if (exception='1') or (interruption='1') then save_msk <= scp_reg(STATUS)(0); end if; scp_reg <= pre_reg; end if; end process; process(clock2) begin if clock2='1' and clock2'event then -- Save the mask when an interruption appears if (exception2='1') or (interruption2='1') then save_msk2 <= scp_reg2(STATUS)(0); end if; scp_reg2 <= pre_reg2; end if; end process; end rtl;
Go to most recent revision | Compare with Previous | Blame | View Log