URL
https://opencores.org/ocsvn/minsoc/minsoc/trunk
Subversion Repositories minsoc
[/] [minsoc/] [branches/] [rc-1.0/] [backend/] [altera_3c25_board/] [configure] - Rev 144
Go to most recent revision | Compare with Previous | Blame | View Log
#!/bin/bash
#new boards have to udpate this
BOARD=altera_3c25_board #this has to have the name of the directory this file is in
DEVICE_PART=EP3C25Q240C8
CONSTRAINT_FILE='altera_3c25_board.ucf'
FAMILY_PART="Cyclone III"
#~new boards update
#system workings
MINSOC_DIR=`pwd`/../..
BACKEND_DIR=$MINSOC_DIR/backend
SYN_DIR=$MINSOC_DIR/syn
SYNSRC_DIR=$MINSOC_DIR/prj/altera
SYNSUPPORT_DIR=$SYN_DIR/buildSupport
MAKEFILE_DIR=$SYN_DIR/altera
PROJECT_FILE=minsoc_top.qsf
SYN_FILES=(adbg_top.vprj jtag_top.vprj or1200_top.vprj uart_top.vprj minsoc_top.vprj altera_virtual_jtag.vhdprj)
MAKEFILE=Makefile
FIND_PART='DEVICE_PART'
FIND_FAMILY='FAMILY_PART'
FIND_VERSION='SW_VERSION'
FIND_CONSTRAINT='CONSTRAINT_FILE'
BOARD_DIR=$BACKEND_DIR/$BOARD
BOARD_FILES=(board.h orp.ld minsoc_defines.v minsoc_bench_defines.v gcc-opt.mk $CONSTRAINT_FILE)
in_minsoc=`pwd | grep minsoc/backend/${BOARD}$`
if [ -z $in_minsoc ]
then
echo ""
echo " !!!WARNING!!!"
echo "This script cannot be run if not in a board directory inside minsoc/backend,"
echo "because it relies on the directory structure of the minsoc system."
echo ""
echo "Possibly your minsoc directory is named differently, minsoc_trunk for example."
echo "Its name must be minsoc only."
echo ""
exit 1
fi
echo ""
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo "Generating project files for simulation and synthesis..."
echo "__________________________________________________________________________"
echo ""
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo ""
echo ""
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
echo ""
echo ""
else
echo "Device part and family for files under $SYNSRC_DIR will patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$PROJECT_FILE > TMPFILE
sed "s/$FIND_FAMILY/$FAMILY_PART/g" TMPFILE > TMPFILE2
#sed "s/$FIND_VERSION/$SW_VERSION/g" TMPFILE> TMPFILE
echo "Adding settings from constraint file..."
cat $CONSTRAINT_FILE >> TMPFILE2
echo "Generating quartus settings from prj files in $SYNSRC_DIR"
for file in "${SYN_FILES[@]}"
do
echo "Adding settings from file $file..."
cat $SYNSRC_DIR/$file >> TMPFILE2
done
mv TMPFILE2 $SYNSUPPORT_DIR/$PROJECT_FILE
rm TMPFILE
echo ""
echo "Generated quartus settings file in $SYNSUPPORT_DIR/$PROJECT_FILE"
echo ""
echo "Copying Makefile from $MAKEFILE_DIR to synthesis directory, $SYN_DIR..."
cp $MAKEFILE_DIR/$MAKEFILE $SYN_DIR/$MAKEFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
echo "For synthesis help go to $SYN_DIR and type \"make\"."
echo ""
echo ""
fi
#Precompiling firmwares
echo "Precompiling delivered libraries and firmwares..."
make -C ../../sw/utils
make -C ../../sw/support
make -C ../../sw/drivers
make -C ../../sw/uart
make -C ../../sw/eth
echo "done."
echo ""
echo ""
echo "Configuration done."
Go to most recent revision | Compare with Previous | Blame | View Log