Subversion Repositories minsoc

MINSOC = ../
MINSOC_DEFINES = ${MINSOC}/backend
MINSOC_RTL = ${MINSOC}/rtl/verilog
MINSOC_STARTUP_RTL = ${MINSOC_RTL}/minsoc_startup
UART_RTL = ${MINSOC_RTL}/uart16550/rtl/verilog
ADV_DEBUG_ROOT = ${MINSOC_RTL}/adv_debug_sys/Hardware
DEBUG_RTL = ${ADV_DEBUG_ROOT}/adv_dbg_if/rtl/verilog
OR1200_RTL = ${MINSOC_RTL}/or1200/rtl/verilog
ETH_RTL = ${MINSOC_RTL}/ethmac/rtl/verilog

help:
        @echo "  all: Synthesize and implement the SoC, then generate a bit stream"
        @echo ""
        @echo "  soc: Synthesize the SoC"
        @echo "  translate: Convert the SoC's ngc file to an ngd file for mapping"
        @echo "  map: Express the SoC netlist in the target hardware"
        @echo "  par: Place the target hardware, then route the wires"
        @echo "  bitgen: Generate a programming file for the target FPGA"
        @echo ""
        @echo "  modules: Synthesize OR1200 processor, debug interface, UART and Ethernet controllers"
        @echo "  or1200: Synthesize the OR1200 processor"
        @echo "  debug: Synthesize the debug interface"
        @echo "  uart: Synthesize the UART"
        @echo "  eth: Synthesize the Ethernet controller"
        @echo ""
        @echo "  clean: Delete all superfluous files generated by Xilinx tools"
        @echo "  distclean: Delete all generated files"

all: minsoc.bit
soc: minsoc_top.ngc
translate: minsoc.ngd
map: minsoc.ncd
par: minsoc_par.ncd
bitgen: minsoc.bit
modules: or1200 debug uart eth
MODULES = or1200_top.ngc adbg_top.ngc uart_top.ngc eth_top.ngc

prepare: 
        rm -rf xst
        mkdir xst
clean:
        rm -rf *.xst *.xrpt *.srp *.lso *.log *.bld *.lst *.twr *.ise *.map *.mrp *.ngm *.pcf *.psr *.xml *.pad *.par *.ptwx *.bgn *.unroutes *.xpi minsoc_par_pad* *.xwbt
        rm -rf _xmsgs xst xlnx_auto_0_xdb
distclean:
        rm -rf *.ngc *.ncd *.ngd *.bit
        make clean

minsoc_top.ngc: ${MINSOC_RTL}/*.v ${MINSOC_DEFINES}/minsoc_defines.v buildSupport/minsoc_top.xst buildSupport/minsoc_top.prj
        make prepare
        xst -ifn "buildSupport/minsoc_top.xst"
        make clean

uart: uart_top.ngc
uart_top.ngc: ${UART_RTL}/*.v buildSupport/uart_top.xst buildSupport/uart_top.prj
        make prepare
        xst -ifn "buildSupport/uart_top.xst"
        make clean

eth: eth_top.ngc
eth_top.ngc: ${ETH_RTL}/*.v buildSupport/eth_top.xst buildSupport/eth_top.prj
        make prepare
        xst -ifn "buildSupport/eth_top.xst"
        make clean

debug: adbg_top.ngc
adbg_top.ngc: ${DEBUG_RTL}/*.v buildSupport/adbg_top.xst buildSupport/adbg_top.prj
        make prepare
        xst -ifn "buildSupport/adbg_top.xst"
        make clean

or1200: or1200_top.ngc
or1200_top.ngc: ${OR1200_RTL}/*.v buildSupport/or1200_top.xst buildSupport/or1200_top.prj
        make prepare
        xst -ifn "buildSupport/or1200_top.xst"
        make clean

minsoc.ngd: ${MINSOC}/backend/CONSTRAINT_FILE minsoc_top.ngc $(MODULES)
        ngdbuild -p DEVICE_PART -uc ${MINSOC}/backend/CONSTRAINT_FILE -aul minsoc_top.ngc minsoc.ngd
        make clean

minsoc.ncd: minsoc.ngd
        map -bp -timing -cm speed -equivalent_register_removal on -logic_opt on -ol high -power off -register_duplication on -retiming on -w -xe n minsoc.ngd
        make clean

minsoc_par.ncd: minsoc.ncd
        par -ol high -w -xe n minsoc.ncd minsoc_par.ncd
        make clean

minsoc.bit: minsoc_par.ncd
        bitgen -d -w minsoc_par.ncd minsoc.bit
        make clean