URL
https://opencores.org/ocsvn/minsoc/minsoc/trunk
Subversion Repositories minsoc
[/] [minsoc/] [trunk/] [backend/] [spartan3e_starter_kit_eth/] [configure] - Rev 128
Go to most recent revision | Compare with Previous | Blame | View Log
#!/bin/bash
#NON STANDARD SCRIPT, USE ANOTHER AS TEMPLATE, NON STANDARD PART IS MARKED AS COMMENT
#new boards have to udpate this
BOARD=spartan3e_starter_kit_eth #this has to have the name of the directory this file is in
DEVICE_PART='xc3s500e-4-fg320'
CONSTRAINT_FILE='spartan3e_starter_kit_eth.ucf'
#~new boards update
#system workings
MINSOC_DIR=`pwd`/../..
BACKEND_DIR=$MINSOC_DIR/backend
SYN_DIR=$MINSOC_DIR/syn
SYNSRC_DIR=$MINSOC_DIR/prj/xilinx
SYNSUPPORT_DIR=$SYN_DIR/buildSupport
MAKEFILE_DIR=$SYN_DIR/xilinx
SYN_FILES=(ethmac.xst uart_top.xst adbg_top.xst or1200_top.xst minsoc_top.xst)
MAKEFILE=Makefile
FIND_PART='DEVICE_PART'
FIND_CONSTRAINT='CONSTRAINT_FILE'
BOARD_DIR=$BACKEND_DIR/$BOARD
BOARD_FILES=(board.h orp.ld minsoc_defines.v minsoc_bench_defines.v gcc-opt.mk $CONSTRAINT_FILE)
in_minsoc=`pwd | grep minsoc/backend/${BOARD}$`
if [ -z $in_minsoc ]
then
echo ""
echo " !!!WARNING!!!"
echo "This script cannot be run if not in a board directory inside minsoc/backend,"
echo "because it relies on the directory structure of the minsoc system."
echo ""
echo "Possibly your minsoc directory is named differently, minsoc_trunk for example."
echo "Its name must be minsoc only."
echo ""
exit 1
fi
#NON STANDARD SCRIPT PART
echo "THIS SCRIPT HAS A NON-STANDARD BEGINNING."
echo "__________________________________________________________________________"
echo "Ethernet on Spartan3E Starter Kit requires another configuration for or1200."
echo "For minsoc release-1.0 or1200_r1 will be used."
echo "This will need or1200_defines.v of or1200_r1 with same configuration."
echo ""
echo "Copying or1200_defines.v, to or1200 implementation directory..."
echo "(minsoc/rtl/verilog/or1200/rtl/verilog)"
echo "__________________________________________________________________________"
cp $BOARD_DIR/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog
echo ""
echo "REGULAR SCRIPT STARTS NOW"
echo "__________________________________________________________________________"
#~NON STANDARD SCRIPT PART
echo ""
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
echo "Generating project files for simulation and synthesis..."
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
else
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
for file in "${SYN_FILES[@]}"
do
echo "Updating synthesis file, $file..."
echo "Copying $file to synthesis directory..."
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $SYNSRC_DIR/$file > TMPFILE
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYNSUPPORT_DIR/$file
rm TMPFILE
done
echo "Updating Makefile file under $MAKEFILE_DIR..."
echo "Copying Makefile to synthesis directory, $SYN_DIR..."
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$MAKEFILE > TMPFILE
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
rm TMPFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
fi
echo ""
echo ""
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
Go to most recent revision | Compare with Previous | Blame | View Log