OpenCores
URL https://opencores.org/ocsvn/mips789/mips789/trunk

Subversion Repositories mips789

[/] [mips789/] [branches/] [avendor/] [bench/] [MODELSIM/] [mips789_top_sim.mpf] - Rev 51

Compare with Previous | Blame | View Log

;
; Copyright Model Technology, a Mentor Graphics Corporation company 2004,
; All rights reserved.
;

[Library]
std = $MODEL_TECH/../std
ieee = $MODEL_TECH/../ieee
verilog = $MODEL_TECH/../verilog
vital2000 = $MODEL_TECH/../vital2000
std_developerskit = $MODEL_TECH/../std_developerskit
synopsys = $MODEL_TECH/../synopsys
modelsim_lib = $MODEL_TECH/../modelsim_lib

work = work
[vcom]
; VHDL93 variable selects language version as the default. 
; Default is VHDL-2002.
; Value of 0 or 1987 for VHDL-1987.
; Value of 1 or 1993 for VHDL-1993.
; Default or value of 2 or 2002 for VHDL-2002.
VHDL93 = 2002

; Show source line containing error. Default is off.
; Show_source = 1

; Turn off unbound-component warnings. Default is on.
; Show_Warning1 = 0

; Turn off process-without-a-wait-statement warnings. Default is on.
; Show_Warning2 = 0

; Turn off null-range warnings. Default is on.
; Show_Warning3 = 0

; Turn off no-space-in-time-literal warnings. Default is on.
; Show_Warning4 = 0

; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on.
; Show_Warning5 = 0

; Turn off optimization for IEEE std_logic_1164 package. Default is on.
; Optimize_1164 = 0

; Turn on resolving of ambiguous function overloading in favor of the
; "explicit" function declaration (not the one automatically created by
; the compiler for each type declaration). Default is off.
; The .ini file has Explict enabled so that std_logic_signed/unsigned
; will match the behavior of synthesis tools.
Explicit = 1

; Turn off acceleration of the VITAL packages. Default is to accelerate.
; NoVital = 1

; Turn off VITAL compliance checking. Default is checking on.
; NoVitalCheck = 1

; Ignore VITAL compliance checking errors. Default is to not ignore.
; IgnoreVitalErrors = 1

; Turn off VITAL compliance checking warnings. Default is to show warnings.
; Show_VitalChecksWarnings = 0

; Turn off PSL assertion warning messges. Default is to show warnings.
; Show_PslChecksWarnings = 0

; Enable parsing of embedded PSL assertions. Default is enabled.
; EmbeddedPsl = 0

; Keep silent about case statement static warnings.
; Default is to give a warning.
; NoCaseStaticError = 1

; Keep silent about warnings caused by aggregates that are not locally static.
; Default is to give a warning.
; NoOthersStaticError = 1

; Treat as errors:
;   case statement static warnings
;   warnings caused by aggregates that are not locally static
; Overrides NoCaseStaticError, NoOthersStaticError settings.
; PedanticErrors = 1

; Turn off inclusion of debugging info within design units.
; Default is to include debugging info.
; NoDebug = 1

; Turn off "Loading..." messages. Default is messages on.
; Quiet = 1

; Turn on some limited synthesis rule compliance checking. Checks only:
;    -- signals used (read) by a process must be in the sensitivity list
; CheckSynthesis = 1

; Activate optimizations on expressions that do not involve signals,
; waits, or function/procedure/task invocations. Default is off.
; ScalarOpts = 1

; Turns on lint-style checking.
; Show_Lint = 1

; Require the user to specify a configuration for all bindings,
; and do not generate a compile time default binding for the
; component. This will result in an elaboration error of
; 'component not bound' if the user fails to do so. Avoids the rare
; issue of a false dependency upon the unused default binding.
; RequireConfigForAllDefaultBinding = 1

; Inhibit range checking on subscripts of arrays. Range checking on
; scalars defined with subtypes is inhibited by default.
; NoIndexCheck = 1

; Inhibit range checks on all (implicit and explicit) assignments to
; scalar objects defined with subtypes.
; NoRangeCheck = 1

[vlog]

; Turn off inclusion of debugging info within design units.
; Default is to include debugging info.
; NoDebug = 1

; Turn on `protect compiler directive processing.
; Default is to ignore `protect directives.
; Protect = 1

; Turn off "Loading..." messages. Default is messages on.
; Quiet = 1

; Turn on Verilog hazard checking (order-dependent accessing of global vars).
; Default is off.
; Hazard = 1

; Turn on converting regular Verilog identifiers to uppercase. Allows case
; insensitivity for module names. Default is no conversion.
; UpCase = 1

; Turn on incremental compilation of modules. Default is off.
; Incremental = 1

; Activate optimizations on expressions that do not involve signals,
; waits, or function/procedure/task invocations. Default is off.
; ScalarOpts = 1

; Turns on lint-style checking.
; Show_Lint = 1

; Show source line containing error. Default is off.
; Show_source = 1

; Turn on bad option warning. Default is off.
; Show_BadOptionWarning = 1

; Revert back to IEEE 1364-1995 syntax, default is 0 (off).
vlog95compat = 0

[sccom]
; Disable SystemC name binding during compilation. Default is off.
; NoNameBind = 1

; Enable use of SCV include files and library.  Default is off.
; UseScv = 1

; Add C++ compiler options to the sccom command line by using this variable.
; CppOptions = -g

; Use custom C++ compiler located at this path rather than ModelSim default.
; The path should point directly at a compiler executable.
; CppPath = /usr/bin/g++

; Enable verbose messages from sccom.  Default is off.
; SccomVerbose = 1

; sccom logfile.  Default is no logfile.
; SccomLogfile = sccom.log


[vsim]
; Simulator resolution
; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100.
resolution = 1ns

; User time unit for run commands
; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the
; unit specified for Resolution. For example, if Resolution is 100ps,
; then UserTimeUnit defaults to ps.
; Should generally be set to default.
UserTimeUnit = ns

; Default run length
RunLength = 100 ns

; Maximum iterations that can be run without advancing simulation time
IterationLimit = 5000

; Directives to license manager can be set either as single value or as
; space separated multi-values:
; vhdl          Immediately reserve a VHDL license
; vlog          Immediately reserve a Verilog license
; plus          Immediately reserve a VHDL and Verilog license
; nomgc         Do not look for Mentor Graphics Licenses
; nomti         Do not look for Model Technology Licenses
; noqueue       Do not wait in the license queue when a license is not available
; viewsim       Try for viewer license but accept simulator license(s) instead
;               of queuing for viewer license (PE ONLY)
; Single value:
; License = plus
; Multi-value:
; License = noqueue plus

; Stop the simulator after a VHDL assertion message
; 0 = Note  1 = Warning  2 = Error  3 = Failure  4 = Fatal
BreakOnAssertion = 3

; VHDL assertion Message Format
; %S - Severity Level 
; %R - Report Message
; %T - Time of assertion
; %D - Delta
; %I - Instance or Region pathname (if available)
; %i - Instance pathname with process
; %O - Process name
; %K - Kind of object path is to return: Instance, Signal, Process or Unknown
; %P - Instance or Region path without leaf process
; %F - File
; %L - Line number of assertion or, if assertion is in a subprogram, line
;      from which the call is made
; %% - Print '%' character
; If specific format for assertion level is defined, use its format.
; If specific format is not define for assertion level, use AssertionFormatBreak
; if assertion triggers a breakpoint (controlled by BreakOnAssertion level),
; otherwise use AssertionFormat.
;
; AssertionFormat = "** %S: %R\n   Time: %T  Iteration: %D%I\n"
; AssertionFormatBreak   = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"
; AssertionFormatNote    = "** %S: %R\n   Time: %T  Iteration: %D%I\n"
; AssertionFormatWarning = "** %S: %R\n   Time: %T  Iteration: %D%I\n"
; AssertionFormatError   = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"
; AssertionFormatFail    = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"
; AssertionFormatFatal  = "** %S: %R\n   Time: %T  Iteration: %D  %K: %i File: %F\n"

; Assertion File - alternate file for storing VHDL/PSL assertion messages
; AssertFile = assert.log

; Default radix for all windows and commands.
; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned
DefaultRadix = symbolic

; VSIM Startup command
; Startup = do startup.do

; File for saving command transcript
TranscriptFile = transcript

; File for saving command history
; CommandHistory = cmdhist.log

; Specify whether paths in simulator commands should be described
; in VHDL or Verilog format.
; For VHDL, PathSeparator = /
; For Verilog, PathSeparator = .
; Must not be the same character as DatasetSeparator.
PathSeparator = /

; Specify the dataset separator for fully rooted contexts.
; The default is ':'. For example: sim:/top
; Must not be the same character as PathSeparator.
DatasetSeparator = :

; Disable VHDL assertion messages
; IgnoreNote = 1
; IgnoreWarning = 1
; IgnoreError = 1
; IgnoreFailure = 1

; Default force kind. May be freeze, drive, or deposit
; or in other terms, fixed, wired, or charged.
; DefaultForceKind = freeze

; If zero, open files when elaborated; otherwise, open files on
; first read or write.  Default is 0.
; DelayFileOpen = 1

; Control VHDL files opened for write.
;   0 = Buffered, 1 = Unbuffered
UnbufferedOutput = 0

; Control the number of VHDL files open concurrently.
; This number should always be less than the current ulimit
; setting for max file descriptors.
;   0 = unlimited
ConcurrentFileLimit = 40

; Control the number of hierarchical regions displayed as
; part of a signal name shown in the Wave window.
; A value of zero tells VSIM to display the full name.
; The default is 0.
; WaveSignalNameWidth = 0

; Turn off warnings from the std_logic_arith, std_logic_unsigned
; and std_logic_signed packages.
; StdArithNoWarnings = 1

; Turn off warnings from the IEEE numeric_std and numeric_bit packages.
; NumericStdNoWarnings = 1

; Control the format of a generate statement label. Do not quote it.
; GenerateFormat = %s__%d

; Specify whether checkpoint files should be compressed.
; The default is 1 (compressed).
; CheckpointCompressMode = 0

; List of dynamically loaded objects for Verilog PLI applications
; Veriuser = veriuser.sl

; Specify default options for the restart command. Options can be one
; or more of: -force -nobreakpoint -nolist -nolog -nowave -noassertions
; DefaultRestartOptions = -force

; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs
; (> 500 megabyte memory footprint). Default is disabled.
; Specify number of megabytes to lock.
; LockedMemory = 1000

; HP-UX 11.00 ONLY - Use /usr/lib/libCsup_v2.sl for shared object loading.
; This is necessary when C++ files have been compiled with aCC's -AA option.
; The default behavior is to use /usr/lib/libCsup.sl.
; UseCsupV2 = 1

; Turn on (1) or off (0) WLF file compression.
; The default is 1 (compress WLF file).
; WLFCompress = 0

; Specify whether to save all design hierarchy (1) in the WLF file
; or only regions containing logged signals (0).
; The default is 0 (log only regions with logged signals).
; WLFSaveAllRegions = 1

; WLF file time limit.  Limit WLF file by time, as closely as possible,
; to the specified amount of simulation time.  When the limit is exceeded
; the earliest times get truncated from the file.
; If both time and size limits are specified the most restrictive is used.
; UserTimeUnits are used if time units are not specified.
; The default is 0 (no limit).  Example: WLFTimeLimit = {100 ms}
; WLFTimeLimit = 0

; WLF file size limit.  Limit WLF file size, as closely as possible,
; to the specified number of megabytes.  If both time and size limits
; are specified then the most restrictive is used.
; The default is 0 (no limit).
; WLFSizeLimit = 1000

; Specify whether or not a WLF file should be deleted when the
; simulation ends.  A value of 1 will cause the WLF file to be deleted.
; The default is 0 (do not delete WLF file when simulation ends).
; WLFDeleteOnQuit = 1

; Specify whether or not a WLF file should be optimized during 
; simulation.  If set to 0, the WLF file will not be optimized.
; The default is 1, optimize the WLF file.
; WLFOptimize = 0

; Specify the name of the WLF file.
; The default is vsim.wlf
; WLFFilename = vsim.wlf

; Specify whether or not integer arrays will appear as memories.
; The default is 1 (display integer arrays as memories).
; ShowIntMem = 0

; Specify whether or not enumerated type arrays (other than std_logic-based)
; will appear as memories.
; The default is 1 (display enumerated type arrays as memories).
; ShowEnumMem = 0

; Specify whether or not arrays of 3 or more dimensions will appear as memories.
; The default is 1 (display 3D+ type arrays as memories).
; Show3DMem = 0

; Turn on/off undebuggable SystemC type warnings. Default is on.
; ShowUndebuggableScTypeWarning = 0

; Turn on/off unassociated SystemC name warnings. Default is off.
; ShowUnassociatedScNameWarning = 1

; Turn on/off PSL assertion pass enable. Default is off.
; AssertionPassEnable = 1

; Turn on/off PSL assertion fail enable. Default is on.
; AssertionFailEnable = 0

; Set PSL assertion pass limit. Default is 1.
; Any positive integer, -1 for infinity.
; AssertionPassLimit = -1

; Set PSL assertion fail limit. Default is 1.
; Any positive integer, -1 for infinity.
; AssertionFailLimit = -1

; Turn on/off PSL assertion pass log. Default is on.
; AssertionPassLog = 0

; Turn on/off PSL assertion fail log. Default is on.
; AssertionFailLog = 0

; Set action type for PSL assertion fail action. Default is continue.
; 0 = Continue  1 = Break  2 = Exit
; AssertionFailAction = 1

; Check vsim plusargs.  Default is 0 (off).
; 0 = Don't check plusargs
; 1 = Warning on unrecognized plusarg
; 2 = Error and exit on unrecognized plusarg
; CheckPlusargs = 1

[lmc]
; ModelSim's interface to Logic Modeling's SmartModel SWIFT software
libsm = $MODEL_TECH/libsm.sl
; ModelSim's interface to Logic Modeling's SmartModel SWIFT software (Windows NT)
; libsm = $MODEL_TECH/libsm.dll
;  Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700)
; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl
;  Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000)
; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o
;  Logic Modeling's SmartModel SWIFT software (Sun4 Solaris)
; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so
;  Logic Modeling's SmartModel SWIFT software (Windows NT)
; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll
;  Logic Modeling's SmartModel SWIFT software (Linux)
; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so

; ModelSim's interface to Logic Modeling's hardware modeler SFI software
libhm = $MODEL_TECH/libhm.sl
; ModelSim's interface to Logic Modeling's hardware modeler SFI software (Windows NT)
; libhm = $MODEL_TECH/libhm.dll
;  Logic Modeling's hardware modeler SFI software (HP 9000 Series 700)
; libsfi = <sfi_dir>/lib/hp700/libsfi.sl
;  Logic Modeling's hardware modeler SFI software (IBM RISC System/6000)
; libsfi = <sfi_dir>/lib/rs6000/libsfi.a
;  Logic Modeling's hardware modeler SFI software (Sun4 Solaris)
; libsfi = <sfi_dir>/lib/sun4.solaris/libsfi.so
;  Logic Modeling's hardware modeler SFI software (Windows NT)
; libsfi = <sfi_dir>/lib/pcnt/lm_sfi.dll
;  Logic Modeling's hardware modeler SFI software (Linux)
; libsfi = <sfi_dir>/lib/linux/libsfi.so
[Project]
Project_Version = 5
Project_DefaultLib = work
Project_SortMethod = unused
Project_Files_Count = 19
Project_File_0 = D:/mips789/rtl/verilog/EXEC_stage.v
Project_File_P_0 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 6 dont_compile 0 cover_stmt 1
Project_File_1 = D:/mips789/rtl/verilog/RF_stage.v
Project_File_P_1 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 16 dont_compile 0 cover_stmt 1
Project_File_2 = D:/mips789/bench/MODELSIM/fifo.v
Project_File_P_2 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 18 dont_compile 0 cover_stmt 1
Project_File_3 = D:/mips789/rtl/verilog/mem_module.v
Project_File_P_3 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 8 dont_compile 0 cover_stmt 1
Project_File_4 = D:/mips789/rtl/verilog/forward.v
Project_File_P_4 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 7 dont_compile 0 cover_stmt 1
Project_File_5 = D:/mips789/rtl/verilog/ulit.v
Project_File_P_5 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 17 dont_compile 0 cover_stmt 1
Project_File_6 = D:/mips789/rtl/verilog/mips_sys.v
Project_File_P_6 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 11 dont_compile 0 cover_stmt 1
Project_File_7 = D:/mips789/bench/MODELSIM/sim_ram.v
Project_File_P_7 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 vlog_options {} vlog_upper 0 compile_to work compile_order 2 dont_compile 0 cover_stmt 1
Project_File_8 = D:/mips789/rtl/verilog/ctl_fsm.v
Project_File_P_8 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 3 dont_compile 0 cover_stmt 1
Project_File_9 = D:/mips789/rtl/verilog/decode_pipe.v
Project_File_P_9 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 4 dont_compile 0 cover_stmt 1
Project_File_10 = D:/mips789/rtl/verilog/mips_core.v
Project_File_P_10 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 9 dont_compile 0 cover_stmt 1
Project_File_11 = D:/mips789/bench/MODELSIM/mips789_defs.v
Project_File_P_11 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 vlog_options {} vlog_upper 0 compile_to work compile_order 0 dont_compile 0 cover_stmt 1
Project_File_12 = D:/mips789/rtl/verilog/mips_top.v
Project_File_P_12 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 12 dont_compile 0 cover_stmt 1
Project_File_13 = D:/mips789/rtl/verilog/mips_uart.v
Project_File_P_13 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 13 dont_compile 0 cover_stmt 1
Project_File_14 = D:/mips789/rtl/verilog/dvc.v
Project_File_P_14 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 5 dont_compile 0 cover_stmt 1
Project_File_15 = D:/mips789/rtl/verilog/mips_dvc.v
Project_File_P_15 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 10 dont_compile 0 cover_stmt 1
Project_File_16 = D:/mips789/rtl/verilog/ram_module.v
Project_File_P_16 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 14 dont_compile 0 cover_stmt 1
Project_File_17 = D:/mips789/rtl/verilog/RF_components.v
Project_File_P_17 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 compile_to work vlog_upper 0 vlog_options {} compile_order 15 dont_compile 0 cover_stmt 1
Project_File_18 = D:/mips789/bench/MODELSIM/mips789_tb.v
Project_File_P_18 = vlog_protect 0 file_type Verilog group_id 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 0 vlog_noload 0 vlog_disableopt 0 vlog_hazard 0 vlog_showsource 0 ood 1 vlog_options {} vlog_upper 0 compile_to work compile_order 1 dont_compile 0 cover_stmt 1
Project_Sim_Count = 0
Project_Folder_Count = 0
Echo_Compile_Output = 0
Save_Compile_Report = 1
VHDL_DoubleClick = Edit
VERILOG_DoubleClick = Edit
SYSTEMC_DoubleClick = Edit
TCL_DoubleClick = Edit
TEXT_DoubleClick = Edit
VHDL_CustomDoubleClick = 
VERILOG_CustomDoubleClick = 
SYSTEMC_CustomDoubleClick = 
TCL_CustomDoubleClick = 
TEXT_CustomDoubleClick = 
ForceSoftPaths = 0

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.