Subversion Repositories mips_enhanced

On-chip rom
CONFIG_AHBROM_ENABLE
  Say Y here to add a block on on-chip rom to the AHB bus. The ram
  provides 0-waitstates read access,  burst support, and 8-, 16- 
  and 32-bit data size. The rom will be syntheised into block rams
  on Xilinx and Altera FPGA devices, and into gates on ASIC 
  technologies. GRLIB includes a utility to automatically create
  the rom VHDL model (ahbrom.vhd) from an ELF file. Refer to the GRLIB
  documentation for details.

On-chip rom address
CONFIG_AHBROM_START
  Set the start address of AHB ROM (HADDR[31:20]). The ROM will occupy
  a 1 Mbyte slot at the selected address. Default is 000, corresponding
  to AHB address 0x00000000. When address 0x0 is selected, the rom area
  of any other memory controller is set to 0x10000000 to avoid conflicts.

Enable pipeline register for on-chip rom
CONFIG_AHBROM_PIPE
  Say Y here to add a data pipeline register to the on-chip rom.
  This should be done when the rom is implemenented in (ASIC) gates,
  or in logic cells on FPGAs. Do not use this option when the rom is
  implemented in block rams. If enabled, the rom will operate with 
  one waitstate.