URL
https://opencores.org/ocsvn/mips_fault_tolerant/mips_fault_tolerant/trunk
Subversion Repositories mips_fault_tolerant
[/] [mips_fault_tolerant/] [trunk/] [source/] [Ir.vhd] - Rev 67
Go to most recent revision | Compare with Previous | Blame | View Log
---------------------------------------------------------------------------------- -- Company: -- Engineer: Lazaridis Dimitris -- -- Create Date: 22:19:43 06/05/2012 -- Design Name: -- Module Name: Ir - Behavioral -- Project Name: -- Target Devices: -- Tool versions: -- Description: -- -- Dependencies: -- -- Revision: -- Revision 0.01 - File Created -- Additional Comments: -- ---------------------------------------------------------------------------------- library IEEE; use IEEE.STD_LOGIC_1164.ALL; -- Uncomment the following library declaration if using -- arithmetic functions with Signed or Unsigned values --use IEEE.NUMERIC_STD.ALL; -- Uncomment the following library declaration if instantiating -- any Xilinx primitives in this code. --library UNISIM; --use UNISIM.VComponents.all; entity Ir is port ( clk : in std_logic; rst : in STD_LOGIC; imem_to_ir : in std_logic_vector(31 downto 0); IRWrite : in std_logic; Opcode : out std_logic_vector(5 downto 0); rs : out std_logic_vector(4 downto 0); rt : out std_logic_vector(4 downto 0); rd : out std_logic_vector(4 downto 0); immed_addr : out std_logic_vector(15 downto 0); Ext_sz_c : out std_logic; From_i_op : out std_logic_vector(1 downto 0); From_i_mux : out std_logic_vector(1 downto 0); lui : out STD_LOGIC ); end Ir; architecture Behavioral of Ir is begin process(clk,rst,imem_to_ir,IRWrite) variable pre_out : std_logic_vector(31 downto 0); begin if rst = '0' then Opcode <= (others => '0'); rs <= (others => '0'); rt <= (others => '0'); rd <= (others => '0'); immed_addr <= (others => '0'); elsif(RISING_EDGE(clk))then if(IRWrite = '1') then pre_out := imem_to_ir; Opcode <= pre_out(31 downto 26); rs <= pre_out(25 downto 21); rt <= pre_out(20 downto 16); rd <= pre_out(15 downto 11); immed_addr <= pre_out(15 downto 0); end if; end if; end process; process(clk,rst,imem_to_ir) --Sign_ext control begin if rst = '0' then Ext_sz_c <= '0'; elsif RISING_EDGE(clk) then if (imem_to_ir(31 downto 26) = "001100") or (imem_to_ir(31 downto 26) ="001101") or (imem_to_ir(31 downto 26) = "001110") then Ext_sz_c <= '1'; else Ext_sz_c <= '0'; end if; end if; end process; process(clk,rst,imem_to_ir) -- I type opcode control for less stages begin if rst = '0' then From_i_op <= "00"; From_i_mux <= "00"; elsif RISING_EDGE(clk) then case imem_to_ir(31 downto 26) is when "001000" => --addi From_i_op <= "00"; From_i_mux <= "10"; when "001001" => From_i_op <= "01"; --addiu From_i_mux <= "10"; when "001100" => From_i_op <= "00"; --andi From_i_mux <= "11"; when "001101" => From_i_op <= "01"; --ori From_i_mux <= "11"; when "001110" => From_i_op <= "10"; --xori From_i_mux <= "11"; when "001111" => From_i_op <= "00"; --lui From_i_mux <= "00"; when "001010" => From_i_op <= "10"; --slti From_i_mux <= "01"; when "001011" => From_i_op <= "11"; --sltiu From_i_mux <= "01"; when others => From_i_op <= "00"; --others From_i_mux <= "00"; end case; end if; end process; process(clk,rst,imem_to_ir) --for lui control begin if rst = '0' then lui <= '0'; elsif RISING_EDGE(clk) then if (imem_to_ir(31 downto 26) = "001111") then lui <= '1'; else lui <= '0'; end if; end if; end process; --with imem_to_ir(31 downto 26) select --Ext_sz_c <= '1' when ("001100" or "001101" or "001110"), -- '0' when others; end Behavioral;
Go to most recent revision | Compare with Previous | Blame | View Log