URL
https://opencores.org/ocsvn/mod_mult_exp/mod_mult_exp/trunk
Subversion Repositories mod_mult_exp
[/] [mod_mult_exp/] [trunk/] [rtl/] [vhdl/] [mod_exp/] [blockMemory32/] [blockMemory.vho] - Rev 5
Compare with Previous | Blame | View Log
---------------------------------------------------------------------------------- This file is owned and controlled by Xilinx and must be used solely ---- for design, simulation, implementation and creation of design files ---- limited to Xilinx devices or technologies. Use with non-Xilinx ---- devices or technologies is expressly prohibited and immediately ---- terminates your license. ---- ---- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY ---- FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES. BY ---- PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE ---- IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS ---- MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY ---- CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY ---- RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY ---- DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE ---- IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR ---- REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF ---- INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A ---- PARTICULAR PURPOSE. ---- ---- Xilinx products are not intended for use in life support appliances, ---- devices, or systems. Use in such applications are expressly ---- prohibited. ---- ---- (c) Copyright 1995-2015 Xilinx, Inc. ---- All rights reserved. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Generated from core with identifier: xilinx.com:ip:blk_mem_gen:7.1 ---- ---- The Xilinx LogiCORE IP Block Memory Generator replaces the Dual Port ---- Block Memory and Single Port Block Memory LogiCOREs, but is not a ---- direct drop-in replacement. It should be used in all new Xilinx ---- designs. The core supports RAM and ROM functions over a wide range of ---- widths and depths. Use this core to generate block memories with ---- symmetric or asymmetric read and write port widths, as well as cores ---- which can perform simultaneous write operations to separate ---- locations, and simultaneous read operations from the same location. ---- For more information on differences in interface and feature support ---- between this core and the Dual Port Block Memory and Single Port ---- Block Memory LogiCOREs, please consult the data sheet. ------------------------------------------------------------------------------------ Interfaces:-- AXI_SLAVE_S_AXI-- AXI_SLAVE-- AXILite_SLAVE_S_AXI-- AXILite_SLAVE-- BRAM_PORTA-- BRAM_PORTA-- BRAM_PORTB-- BRAM_PORTB-- The following code must appear in the VHDL architecture header:------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAGCOMPONENT blockMemoryPORT (clka : IN STD_LOGIC;rsta : IN STD_LOGIC;wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);addra : IN STD_LOGIC_VECTOR(3 DOWNTO 0);dina : IN STD_LOGIC_VECTOR(31 DOWNTO 0);douta : OUT STD_LOGIC_VECTOR(31 DOWNTO 0));END COMPONENT;-- COMP_TAG_END ------ End COMPONENT Declaration -------------- The following code must appear in the VHDL architecture-- body. Substitute your own instance name and net names.------------- Begin Cut here for INSTANTIATION Template ----- INST_TAGyour_instance_name : blockMemoryPORT MAP (clka => clka,rsta => rsta,wea => wea,addra => addra,dina => dina,douta => douta);-- INST_TAG_END ------ End INSTANTIATION Template -------------- You must compile the wrapper file blockMemory.vhd when simulating-- the core, blockMemory. When compiling the wrapper file, be sure to-- reference the XilinxCoreLib VHDL simulation library. For detailed-- instructions, please refer to the "CORE Generator Help".