URL
https://opencores.org/ocsvn/mod_sim_exp/mod_sim_exp/trunk
Subversion Repositories mod_sim_exp
[/] [mod_sim_exp/] [tags/] [Release_1.3/] [rtl/] [vhdl/] [core/] [mod_sim_exp_pkg.vhd] - Rev 21
Go to most recent revision | Compare with Previous | Blame | View Log
---------------------------------------------------------------------- ---- mod_sim_exp_pkg ---- ---- ---- ---- This file is part of the ---- ---- Modular Simultaneous Exponentiation Core project ---- ---- http://www.opencores.org/cores/mod_sim_exp/ ---- ---- ---- ---- Description ---- ---- Package for the Modular Simultaneous Exponentiation Core ---- ---- Project. Contains the component declarations and used ---- ---- constants. ---- ---- ---- ---- Dependencies: none ---- ---- ---- ---- Authors: ---- ---- - Geoffrey Ottoy, DraMCo research group ---- ---- - Jonas De Craene, JonasDC@opencores.org ---- ---- ---- ---------------------------------------------------------------------- ---- ---- ---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- ---- ---- ---- This source file may be used and distributed without ---- ---- restriction provided that this copyright statement is not ---- ---- removed from the file and that any derivative work contains ---- ---- the original copyright notice and the associated disclaimer. ---- ---- ---- ---- This source file is free software; you can redistribute it ---- ---- and/or modify it under the terms of the GNU Lesser General ---- ---- Public License as published by the Free Software Foundation; ---- ---- either version 2.1 of the License, or (at your option) any ---- ---- later version. ---- ---- ---- ---- This source is distributed in the hope that it will be ---- ---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- ---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- ---- PURPOSE. See the GNU Lesser General Public License for more ---- ---- details. ---- ---- ---- ---- You should have received a copy of the GNU Lesser General ---- ---- Public License along with this source; if not, download it ---- ---- from http://www.opencores.org/lgpl.shtml ---- ---- ---- ---------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; package mod_sim_exp_pkg is -------------------------------------------------------------------- -- d_flip_flop -------------------------------------------------------------------- -- 1-bit D flip-flop with asynchronous active high reset -- component d_flip_flop is port( core_clk : in std_logic; -- clock signal reset : in std_logic; -- active high reset din : in std_logic; -- data in dout : out std_logic -- data out ); end component d_flip_flop; -------------------------------------------------------------------- -- register_1b -------------------------------------------------------------------- -- 1-bit register with asynchronous reset and clock enable -- component register_1b is port( core_clk : in std_logic; -- clock input ce : in std_logic; -- clock enable (active high) reset : in std_logic; -- reset (active high) din : in std_logic; -- data in dout : out std_logic -- data out ); end component register_1b; -------------------------------------------------------------------- -- register_n -------------------------------------------------------------------- -- n-bit register with asynchronous reset and clock enable -- component register_n is generic( width : integer := 4 ); port( core_clk : in std_logic; -- clock input ce : in std_logic; -- clock enable (active high) reset : in std_logic; -- reset (active high) din : in std_logic_vector((width-1) downto 0); -- data in (width)-bit dout : out std_logic_vector((width-1) downto 0) -- data out (width)-bit ); end component register_n; -------------------------------------------------------------------- -- cell_1b_adder -------------------------------------------------------------------- -- 1-bit full adder cell using combinatorial logic -- component cell_1b_adder is port ( -- input operands a, b a : in std_logic; b : in std_logic; -- carry in, out cin : in std_logic; cout : out std_logic; -- result out r : out std_logic ); end component cell_1b_adder; -------------------------------------------------------------------- -- cell_1b_mux -------------------------------------------------------------------- -- 1-bit mux for a standard cell in the montgommery multiplier -- systolic array -- component cell_1b_mux is port ( -- input bits my : in std_logic; y : in std_logic; m : in std_logic; -- selection bits x : in std_logic; q : in std_logic; -- mux out result : out std_logic ); end component cell_1b_mux; -------------------------------------------------------------------- -- cell_1b -------------------------------------------------------------------- -- 1-bit cell for the systolic array -- component cell_1b is port ( -- operand input bits (m+y, y and m) my : in std_logic; y : in std_logic; m : in std_logic; -- operand x input bit and q x : in std_logic; q : in std_logic; -- previous result input bit a : in std_logic; -- carry's cin : in std_logic; cout : out std_logic; -- cell result out r : out std_logic ); end component cell_1b; -------------------------------------------------------------------- -- adder_block -------------------------------------------------------------------- -- (width)-bit full adder block using cell_1b_adders with buffered -- carry out -- component adder_block is generic ( width : integer := 32 --adder operand widths ); port ( -- clock input core_clk : in std_logic; -- adder input operands a, b (width)-bit a : in std_logic_vector((width-1) downto 0); b : in std_logic_vector((width-1) downto 0); -- carry in, out cin : in std_logic; cout : out std_logic; -- adder result out (width)-bit r : out std_logic_vector((width-1) downto 0) ); end component adder_block; -------------------------------------------------------------------- -- adder_n -------------------------------------------------------------------- -- n-bit adder using adder blocks. works in stages, to prevent -- large carry propagation. -- Result avaiable after (width/block_width) clock cycles -- component adder_n is generic ( width : integer := 1536; -- adder operands width block_width : integer := 8 -- adder blocks size ); port ( -- clock input core_clk : in std_logic; -- adder input operands (width)-bit a : in std_logic_vector((width-1) downto 0); b : in std_logic_vector((width-1) downto 0); -- carry in, out cin : in std_logic; cout : out std_logic; -- adder output result (width)-bit r : out std_logic_vector((width-1) downto 0) ); end component adder_n; -------------------------------------------------------------------- -- standard_cell_block -------------------------------------------------------------------- -- a standard cell block of (width)-bit for the montgommery multiplier -- systolic array -- component standard_cell_block is generic ( width : integer := 16 ); port ( -- modulus and y operand input (width)-bit my : in std_logic_vector((width-1) downto 0); y : in std_logic_vector((width-1) downto 0); m : in std_logic_vector((width-1) downto 0); -- q and x operand input (serial input) x : in std_logic; q : in std_logic; -- previous result in (width)-bit a : in std_logic_vector((width-1) downto 0); -- carry in and out cin : in std_logic; cout : out std_logic; -- result out (width)-bit r : out std_logic_vector((width-1) downto 0) ); end component standard_cell_block; -------------------------------------------------------------------- -- standard_stage -------------------------------------------------------------------- -- standard stage for use in the montgommery multiplier pipeline -- the result is available after 1 clock cycle -- component standard_stage is generic( width : integer := 32 ); port( -- clock input core_clk : in std_logic; -- modulus and y operand input (width)-bit my : in std_logic_vector((width-1) downto 0); y : in std_logic_vector((width-1) downto 0); m : in std_logic_vector((width-1) downto 0); -- q and x operand input (serial input) xin : in std_logic; qin : in std_logic; -- q and x operand output (serial output) xout : out std_logic; qout : out std_logic; -- msb input (lsb from next stage, for shift right operation) a_msb : in std_logic; -- carry out(clocked) and in cin : in std_logic; cout : out std_logic; -- control singals start : in std_logic; reset : in std_logic; done : out std_logic; -- result out r : out std_logic_vector((width-1) downto 0) ); end component standard_stage; -------------------------------------------------------------------- -- first_stage -------------------------------------------------------------------- -- first stage for use in the montgommery multiplier pipeline -- generates the q signal for all following stages -- the result is available after 1 clock cycle -- component first_stage is generic( width : integer := 16 -- must be the same as width of the standard stage ); port( -- clock input core_clk : in std_logic; -- modulus and y operand input (width+1)-bit my : in std_logic_vector((width) downto 0); y : in std_logic_vector((width) downto 0); m : in std_logic_vector((width) downto 0); -- x operand input (serial input) xin : in std_logic; -- q and x operand output (serial output) xout : out std_logic; qout : out std_logic; -- msb input (lsb from next stage, for shift right operation) a_msb : in std_logic; -- carry out cout : out std_logic; -- control signals start : in std_logic; reset : in std_logic; done : out std_logic; -- result out r : out std_logic_vector((width-1) downto 0) ); end component first_stage; -------------------------------------------------------------------- -- last_stage -------------------------------------------------------------------- -- last stage for use in the montgommery multiplier pipeline -- the result is available after 1 clock cycle -- component last_stage is generic( width : integer := 16 -- must be the same as width of the standard stage ); port( -- clock input core_clk : in std_logic; -- modulus and y operand input (width(-1))-bit my : in std_logic_vector((width-1) downto 0); y : in std_logic_vector((width-2) downto 0); m : in std_logic_vector((width-2) downto 0); -- q and x operand input (serial input) xin : in std_logic; qin : in std_logic; -- carry in cin : in std_logic; -- control signals start : in std_logic; reset : in std_logic; -- result out r : out std_logic_vector((width+1) downto 0) ); end component last_stage; -------------------------------------------------------------------- -- counter_sync -------------------------------------------------------------------- -- counter with synchronous count enable. It generates an -- overflow when max_value is reached -- component counter_sync is generic( max_value : integer := 1024 -- maximum value (constraints the nr bits for counter) ); port( reset_value : in integer; -- value the counter counts to core_clk : in std_logic; -- clock input ce : in std_logic; -- count enable reset : in std_logic; -- reset input overflow : out std_logic -- gets high when counter reaches reset_value ); end component counter_sync; -------------------------------------------------------------------- -- stepping_logic -------------------------------------------------------------------- -- stepping logic for the pipeline, generates the start pulses for the -- first stage and keeps track of when the last stages are done -- component stepping_logic is generic( n : integer := 1536; -- max nr of steps required to complete a multiplication t : integer := 192 -- total nr of steps in the pipeline ); port( core_clk : in std_logic; -- clock input start : in std_logic; -- start signal for pipeline (one multiplication) reset : in std_logic; -- reset signal t_sel : in integer range 0 to t; -- nr of stages in the pipeline piece n_sel : in integer range 0 to n; -- nr of steps(bits in operands) required for a complete multiplication start_first_stage : out std_logic; -- start pulse output for first stage stepping_done : out std_logic -- done signal ); end component stepping_logic; -------------------------------------------------------------------- -- x_shift_reg -------------------------------------------------------------------- -- shift register for the x operand of the multiplier -- outputs the lsb of the register or bit at offset according to the -- selected pipeline part -- component x_shift_reg is generic( n : integer := 1536; -- width of the operands (# bits) t : integer := 48; -- total number of stages tl : integer := 16 -- lower number of stages ); port( -- clock input clk : in std_logic; -- x operand in (n-bit) x_in : in std_logic_vector((n-1) downto 0); -- control signals reset : in std_logic; -- reset, clears register load_x : in std_logic; -- load operand into shift register next_x : in std_logic; -- next bit of x p_sel : in std_logic_vector(1 downto 0); -- pipeline selection -- x operand bit out (serial) xi : out std_logic ); end component x_shift_reg; component autorun_cntrl is port ( clk : in std_logic; reset : in std_logic; start : in std_logic; done : out std_logic; op_sel : out std_logic_vector (1 downto 0); start_multiplier : out std_logic; multiplier_done : in std_logic; read_buffer : out std_logic; buffer_din : in std_logic_vector (31 downto 0); buffer_empty : in std_logic ); end component autorun_cntrl; component fifo_primitive is port ( clk : in std_logic; din : in std_logic_vector (31 downto 0); dout : out std_logic_vector (31 downto 0); empty : out std_logic; full : out std_logic; push : in std_logic; pop : in std_logic; reset : in std_logic; nopop : out std_logic; nopush : out std_logic ); end component fifo_primitive; component modulus_ram is port( clk : in std_logic; modulus_addr : in std_logic_vector(5 downto 0); write_modulus : in std_logic; modulus_in : in std_logic_vector(31 downto 0); modulus_out : out std_logic_vector(1535 downto 0) ); end component modulus_ram; component mont_ctrl is port ( clk : in std_logic; reset : in std_logic; -- bus side start : in std_logic; x_sel_single : in std_logic_vector(1 downto 0); y_sel_single : in std_logic_vector(1 downto 0); run_auto : in std_logic; op_buffer_empty : in std_logic; op_sel_buffer : in std_logic_vector(31 downto 0); read_buffer : out std_logic; buffer_noread : in std_logic; done : out std_logic; calc_time : out std_logic; -- multiplier side op_sel : out std_logic_vector(1 downto 0); load_x : out std_logic; load_result : out std_logic; start_multiplier : out std_logic; multiplier_ready : in std_logic ); end component mont_ctrl; component mont_mult_sys_pipeline is generic ( n : integer := 1536; nr_stages : integer := 96; --(divides n, bits_low & (n-bits_low)) stages_low : integer := 32 ); port ( core_clk : in std_logic; xy : in std_logic_vector((n-1) downto 0); m : in std_logic_vector((n-1) downto 0); r : out std_logic_vector((n-1) downto 0); start : in std_logic; reset : in std_logic; p_sel : in std_logic_vector(1 downto 0); load_x : in std_logic; ready : out std_logic ); end component mont_mult_sys_pipeline; component multiplier_core is port( clk : in std_logic; reset : in std_logic; -- operand memory interface (plb shared memory) write_enable : in std_logic; data_in : in std_logic_vector (31 downto 0); rw_address : in std_logic_vector (8 downto 0); data_out : out std_logic_vector (31 downto 0); collision : out std_logic; -- op_sel fifo interface fifo_din : in std_logic_vector (31 downto 0); fifo_push : in std_logic; fifo_full : out std_logic; fifo_nopush : out std_logic; -- ctrl signals start : in std_logic; run_auto : in std_logic; ready : out std_logic; x_sel_single : in std_logic_vector (1 downto 0); y_sel_single : in std_logic_vector (1 downto 0); dest_op_single : in std_logic_vector (1 downto 0); p_sel : in std_logic_vector (1 downto 0); calc_time : out std_logic ); end component multiplier_core; component operand_dp is port ( clka : in std_logic; wea : in std_logic_vector(0 downto 0); addra : in std_logic_vector(5 downto 0); dina : in std_logic_vector(31 downto 0); douta : out std_logic_vector(511 downto 0); clkb : in std_logic; web : in std_logic_vector(0 downto 0); addrb : in std_logic_vector(5 downto 0); dinb : in std_logic_vector(511 downto 0); doutb : out std_logic_vector(31 downto 0) ); end component operand_dp; component operand_mem is generic(n : integer := 1536 ); port( -- data interface (plb side) data_in : in std_logic_vector(31 downto 0); data_out : out std_logic_vector(31 downto 0); rw_address : in std_logic_vector(8 downto 0); -- address structure: -- bit: 8 -> '1': modulus -- '0': operands -- bits: 7-6 -> operand_in_sel in case of bit 8 = '0' -- don't care in case of modulus -- bits: 5-0 -> modulus_addr / operand_addr resp. -- operand interface (multiplier side) op_sel : in std_logic_vector(1 downto 0); xy_out : out std_logic_vector(1535 downto 0); m : out std_logic_vector(1535 downto 0); result_in : in std_logic_vector(1535 downto 0); -- control signals load_op : in std_logic; load_m : in std_logic; load_result : in std_logic; result_dest_op : in std_logic_vector(1 downto 0); collision : out std_logic; -- system clock clk : in std_logic ); end component operand_mem; component operand_ram is port( -- write_operand_ack voorzien? -- global ports clk : in std_logic; collision : out std_logic; -- bus side connections (32-bit serial) operand_addr : in std_logic_vector(5 downto 0); operand_in : in std_logic_vector(31 downto 0); operand_in_sel : in std_logic_vector(1 downto 0); result_out : out std_logic_vector(31 downto 0); write_operand : in std_logic; -- multiplier side connections (1536 bit parallel) result_dest_op : in std_logic_vector(1 downto 0); operand_out : out std_logic_vector(1535 downto 0); operand_out_sel : in std_logic_vector(1 downto 0); -- controlled by bus side write_result : in std_logic; result_in : in std_logic_vector(1535 downto 0) ); end component operand_ram; component operands_sp is port ( clka : in std_logic; wea : in std_logic_vector(0 downto 0); addra : in std_logic_vector(4 downto 0); dina : in std_logic_vector(31 downto 0); douta : out std_logic_vector(511 downto 0) ); end component operands_sp; component systolic_pipeline is generic( n : integer := 1536; -- width of the operands (# bits) t : integer := 192; -- number of stages (divider of n) >= 2 tl : integer := 64 -- best take t = sqrt(n) ); port( core_clk : in std_logic; my : in std_logic_vector((n) downto 0); y : in std_logic_vector((n-1) downto 0); m : in std_logic_vector((n-1) downto 0); xi : in std_logic; start : in std_logic; reset : in std_logic; p_sel : in std_logic_vector(1 downto 0); -- select which piece of the multiplier will be used ready : out std_logic; next_x : out std_logic; r : out std_logic_vector((n+1) downto 0) ); end component systolic_pipeline; end package mod_sim_exp_pkg;
Go to most recent revision | Compare with Previous | Blame | View Log