URL
https://opencores.org/ocsvn/neorv32/neorv32/trunk
Subversion Repositories neorv32
[/] [neorv32/] [trunk/] [rtl/] [core/] [neorv32_package.vhd] - Rev 73
Go to most recent revision | Compare with Previous | Blame | View Log
-- ################################################################################################# -- # << NEORV32 - Main VHDL package file >> # -- # ********************************************************************************************* # -- # BSD 3-Clause License # -- # # -- # Copyright (c) 2022, Stephan Nolting. All rights reserved. # -- # # -- # Redistribution and use in source and binary forms, with or without modification, are # -- # permitted provided that the following conditions are met: # -- # # -- # 1. Redistributions of source code must retain the above copyright notice, this list of # -- # conditions and the following disclaimer. # -- # # -- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of # -- # conditions and the following disclaimer in the documentation and/or other materials # -- # provided with the distribution. # -- # # -- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to # -- # endorse or promote products derived from this software without specific prior written # -- # permission. # -- # # -- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS # -- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # -- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # -- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # -- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # -- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # -- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # -- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED # -- # OF THE POSSIBILITY OF SUCH DAMAGE. # -- # ********************************************************************************************* # -- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting # -- ################################################################################################# library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; package neorv32_package is -- Architecture Configuration ------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- address space -- constant ispace_base_c : std_ulogic_vector(31 downto 0) := x"00000000"; -- default instruction memory address space base address constant dspace_base_c : std_ulogic_vector(31 downto 0) := x"80000000"; -- default data memory address space base address -- use dedicated hardware reset value for UNCRITICAL CPU registers -- -- FALSE=reset value is irrelevant (might simplify HW), default; TRUE=defined LOW reset value constant dedicated_reset_c : boolean := false; -- "critical" number of implemented PMP regions -- -- if more PMP regions (> pmp_num_regions_critical_c) are defined, another register stage is automatically inserted into the memory interfaces -- increasing instruction fetch & data access latency by +1 cycle but also reducing critical path length constant pmp_num_regions_critical_c : natural := 8; -- default=8 -- "response time window" for processor-internal modules -- -- = cycles after which an *unacknowledged* internal bus access will timeout and trigger a bus fault exception (min 2) constant max_proc_int_response_time_c : natural := 15; -- jtag tap - identifier -- constant jtag_tap_idcode_version_c : std_ulogic_vector(03 downto 0) := x"0"; -- version constant jtag_tap_idcode_partid_c : std_ulogic_vector(15 downto 0) := x"cafe"; -- part number constant jtag_tap_idcode_manid_c : std_ulogic_vector(10 downto 0) := "00000000000"; -- manufacturer id -- Architecture Constants (do not modify!) ------------------------------------------------ -- ------------------------------------------------------------------------------------------- constant data_width_c : natural := 32; -- native data path width - do not change! constant hw_version_c : std_ulogic_vector(31 downto 0) := x"01060900"; -- no touchy! constant archid_c : natural := 19; -- official NEORV32 architecture ID - hands off! -- Check if we're inside the Matrix ------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant is_simulation_c : boolean := false -- seems like we're on real hardware -- pragma translate_off -- synthesis translate_off -- synthesis synthesis_off -- RTL_SYNTHESIS OFF or true -- this MIGHT be a simulation -- RTL_SYNTHESIS ON -- synthesis synthesis_on -- synthesis translate_on -- pragma translate_on ; -- External Interface Types --------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- type sdata_8x32_t is array (0 to 7) of std_ulogic_vector(31 downto 0); type sdata_8x32r_t is array (0 to 7) of std_logic_vector(31 downto 0); -- resolved type -- Internal Interface Types --------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- type pmp_ctrl_if_t is array (0 to 15) of std_ulogic_vector(07 downto 0); type pmp_addr_if_t is array (0 to 15) of std_ulogic_vector(33 downto 2); -- bits 33:2 of phys. address -- Internal Memory Types Configuration Types ---------------------------------------------- -- ------------------------------------------------------------------------------------------- type mem32_t is array (natural range <>) of std_ulogic_vector(31 downto 0); -- memory with 32-bit entries type mem8_t is array (natural range <>) of std_ulogic_vector(07 downto 0); -- memory with 8-bit entries -- Helper Functions ----------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function index_size_f(input : natural) return natural; function cond_sel_natural_f(cond : boolean; val_t : natural; val_f : natural) return natural; function cond_sel_int_f(cond : boolean; val_t : integer; val_f : integer) return integer; function cond_sel_stdulogicvector_f(cond : boolean; val_t : std_ulogic_vector; val_f : std_ulogic_vector) return std_ulogic_vector; function cond_sel_stdulogic_f(cond : boolean; val_t : std_ulogic; val_f : std_ulogic) return std_ulogic; function cond_sel_string_f(cond : boolean; val_t : string; val_f : string) return string; function bool_to_ulogic_f(cond : boolean) return std_ulogic; function bin_to_gray_f(input : std_ulogic_vector) return std_ulogic_vector; function gray_to_bin_f(input : std_ulogic_vector) return std_ulogic_vector; function or_reduce_f(a : std_ulogic_vector) return std_ulogic; function and_reduce_f(a : std_ulogic_vector) return std_ulogic; function xor_reduce_f(a : std_ulogic_vector) return std_ulogic; function to_hexchar_f(input : std_ulogic_vector(3 downto 0)) return character; function hexchar_to_stdulogicvector_f(input : character) return std_ulogic_vector; function bit_rev_f(input : std_ulogic_vector) return std_ulogic_vector; function is_power_of_two_f(input : natural) return boolean; function bswap32_f(input : std_ulogic_vector) return std_ulogic_vector; function char_to_lower_f(ch : character) return character; function str_equal_f(str0 : string; str1 : string) return boolean; function popcount_f(input : std_ulogic_vector) return natural; function leading_zeros_f(input : std_ulogic_vector) return natural; impure function mem32_init_f(init : mem32_t; depth : natural) return mem32_t; -- Internal (auto-generated) Configurations ----------------------------------------------- -- ------------------------------------------------------------------------------------------- constant def_rst_val_c : std_ulogic; -- Use a deferred constant, prevents compile error with Questa, see IEEE 1076-2008 14.4.2.1 -- Processor-Internal Address Space Layout ------------------------------------------------ -- ------------------------------------------------------------------------------------------- -- Internal Instruction Memory (IMEM) and Date Memory (DMEM) -- constant imem_base_c : std_ulogic_vector(data_width_c-1 downto 0) := ispace_base_c; -- internal instruction memory base address constant dmem_base_c : std_ulogic_vector(data_width_c-1 downto 0) := dspace_base_c; -- internal data memory base address --> internal data/instruction memory sizes are configured via top's generics -- !!! IMPORTANT: The base address of each component/module has to be aligned to the !!! -- !!! total size of the module's occupied address space. The occupied address space !!! -- !!! has to be a power of two (minimum 4 bytes). Address spaces must not overlap. !!! -- Internal Bootloader ROM -- -- Actual bootloader size is determined during runtime via the length of the bootloader initialization image constant boot_rom_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffff0000"; -- bootloader base address, fixed! constant boot_rom_max_size_c : natural := 32*1024; -- max module's address space size in bytes, fixed! -- On-Chip Debugger: Debug Module -- constant dm_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffff800"; -- base address, fixed! constant dm_size_c : natural := 4*32*4; -- debug ROM address space size in bytes, fixed constant dm_code_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffff800"; constant dm_pbuf_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffff880"; constant dm_data_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffff900"; constant dm_sreg_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffff980"; -- IO: Peripheral Devices ("IO") Area -- -- Control register(s) (including the device-enable flag) should be located at the base address of each device constant io_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe00"; constant io_size_c : natural := 512; -- IO address space size in bytes, fixed! -- Custom Functions Subsystem (CFS) -- constant cfs_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe00"; -- base address constant cfs_size_c : natural := 32*4; -- module's address space in bytes constant cfs_reg0_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe00"; constant cfs_reg1_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe04"; constant cfs_reg2_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe08"; constant cfs_reg3_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe0c"; constant cfs_reg4_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe10"; constant cfs_reg5_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe14"; constant cfs_reg6_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe18"; constant cfs_reg7_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe1c"; constant cfs_reg8_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe20"; constant cfs_reg9_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe24"; constant cfs_reg10_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe28"; constant cfs_reg11_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe2c"; constant cfs_reg12_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe30"; constant cfs_reg13_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe34"; constant cfs_reg14_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe38"; constant cfs_reg15_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe3c"; constant cfs_reg16_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe40"; constant cfs_reg17_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe44"; constant cfs_reg18_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe48"; constant cfs_reg19_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe4c"; constant cfs_reg20_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe50"; constant cfs_reg21_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe54"; constant cfs_reg22_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe58"; constant cfs_reg23_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe5c"; constant cfs_reg24_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe60"; constant cfs_reg25_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe64"; constant cfs_reg26_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe68"; constant cfs_reg27_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe6c"; constant cfs_reg28_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe70"; constant cfs_reg29_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe74"; constant cfs_reg30_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe78"; constant cfs_reg31_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe7c"; -- Pulse-Width Modulation Controller (PWM) -- constant pwm_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe80"; -- base address constant pwm_size_c : natural := 16*4; -- module's address space size in bytes constant pwm_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe80"; constant pwm_duty0_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe84"; constant pwm_duty1_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe88"; constant pwm_duty2_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe8c"; constant pwm_duty3_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe90"; constant pwm_duty4_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe94"; constant pwm_duty5_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe98"; constant pwm_duty6_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffe9c"; constant pwm_duty7_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffea0"; constant pwm_duty8_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffea4"; constant pwm_duty9_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffea8"; constant pwm_duty10_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffeac"; constant pwm_duty11_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffeb0"; constant pwm_duty12_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffeb4"; constant pwm_duty13_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffeb8"; constant pwm_duty14_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffebc"; -- Stream Link Interface (SLINK) -- constant slink_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"fffffec0"; -- base address constant slink_size_c : natural := 16*4; -- module's address space size in bytes -- reserved -- --constant reserved_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff00"; -- base address --constant reserved_size_c : natural := 16*4; -- module's address space size in bytes -- Execute In Place Module (XIP) -- constant xip_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff40"; -- base address constant xip_size_c : natural := 4*4; -- module's address space size in bytes constant xip_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff40"; constant xip_map_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff44"; constant xip_data_lo_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff48"; constant xip_data_hi_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff4C"; -- reserved -- --constant reserved_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff50"; -- base address --constant reserved_size_c : natural := 4*4; -- module's address space size in bytes -- General Purpose Timer (GPTMR) -- constant gptmr_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff60"; -- base address constant gptmr_size_c : natural := 4*4; -- module's address space size in bytes constant gptmr_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff60"; constant gptmr_thres_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff64"; constant gptmr_count_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff68"; --constant gptmr_reserve_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff6c"; -- reserved -- --constant reserved_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff70"; -- base address --constant reserved_size_c : natural := 2*4; -- module's address space size in bytes -- reserved -- --constant reserved_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff78"; -- base address --constant reserved_size_c : natural := 1*4; -- module's address space size in bytes -- Bus Access Monitor (BUSKEEPER) -- constant buskeeper_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff7c"; -- base address constant buskeeper_size_c : natural := 1*4; -- module's address space size in bytes -- External Interrupt Controller (XIRQ) -- constant xirq_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff80"; -- base address constant xirq_size_c : natural := 4*4; -- module's address space size in bytes constant xirq_enable_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff80"; constant xirq_pending_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff84"; constant xirq_source_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff88"; --constant xirq_reserved_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff8c"; -- Machine System Timer (MTIME) -- constant mtime_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff90"; -- base address constant mtime_size_c : natural := 4*4; -- module's address space size in bytes constant mtime_time_lo_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff90"; constant mtime_time_hi_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff94"; constant mtime_cmp_lo_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff98"; constant mtime_cmp_hi_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffff9c"; -- Primary Universal Asynchronous Receiver/Transmitter (UART0) -- constant uart0_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffa0"; -- base address constant uart0_size_c : natural := 2*4; -- module's address space size in bytes constant uart0_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffa0"; constant uart0_rtx_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffa4"; -- Serial Peripheral Interface (SPI) -- constant spi_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffa8"; -- base address constant spi_size_c : natural := 2*4; -- module's address space size in bytes constant spi_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffa8"; constant spi_rtx_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffac"; -- Two Wire Interface (TWI) -- constant twi_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffb0"; -- base address constant twi_size_c : natural := 2*4; -- module's address space size in bytes constant twi_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffb0"; constant twi_rtx_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffb4"; -- True Random Number Generator (TRNG) -- constant trng_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffb8"; -- base address constant trng_size_c : natural := 1*4; -- module's address space size in bytes constant trng_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffb8"; -- Watch Dog Timer (WDT) -- constant wdt_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffbc"; -- base address constant wdt_size_c : natural := 1*4; -- module's address space size in bytes constant wdt_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffbc"; -- General Purpose Input/Output Controller (GPIO) -- constant gpio_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffc0"; -- base address constant gpio_size_c : natural := 4*4; -- module's address space size in bytes constant gpio_in_lo_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffc0"; constant gpio_in_hi_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffc4"; constant gpio_out_lo_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffc8"; constant gpio_out_hi_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffcc"; -- Secondary Universal Asynchronous Receiver/Transmitter (UART1) -- constant uart1_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffd0"; -- base address constant uart1_size_c : natural := 2*4; -- module's address space size in bytes constant uart1_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffd0"; constant uart1_rtx_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffd4"; -- Smart LED (WS2811/WS2812) Interface (NEOLED) -- constant neoled_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffd8"; -- base address constant neoled_size_c : natural := 2*4; -- module's address space size in bytes constant neoled_ctrl_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffd8"; constant neoled_data_addr_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffdc"; -- System Information Memory (SYSINFO) -- constant sysinfo_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"ffffffe0"; -- base address constant sysinfo_size_c : natural := 8*4; -- module's address space size in bytes -- Main CPU Control Bus ------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- register file -- constant ctrl_rf_wb_en_c : natural := 0; -- write back enable constant ctrl_rf_rs1_adr0_c : natural := 1; -- source register 1 address bit 0 constant ctrl_rf_rs1_adr1_c : natural := 2; -- source register 1 address bit 1 constant ctrl_rf_rs1_adr2_c : natural := 3; -- source register 1 address bit 2 constant ctrl_rf_rs1_adr3_c : natural := 4; -- source register 1 address bit 3 constant ctrl_rf_rs1_adr4_c : natural := 5; -- source register 1 address bit 4 constant ctrl_rf_rs2_adr0_c : natural := 6; -- source register 2 address bit 0 constant ctrl_rf_rs2_adr1_c : natural := 7; -- source register 2 address bit 1 constant ctrl_rf_rs2_adr2_c : natural := 8; -- source register 2 address bit 2 constant ctrl_rf_rs2_adr3_c : natural := 9; -- source register 2 address bit 3 constant ctrl_rf_rs2_adr4_c : natural := 10; -- source register 2 address bit 4 constant ctrl_rf_rd_adr0_c : natural := 11; -- destination register address bit 0 constant ctrl_rf_rd_adr1_c : natural := 12; -- destination register address bit 1 constant ctrl_rf_rd_adr2_c : natural := 13; -- destination register address bit 2 constant ctrl_rf_rd_adr3_c : natural := 14; -- destination register address bit 3 constant ctrl_rf_rd_adr4_c : natural := 15; -- destination register address bit 4 constant ctrl_rf_mux0_c : natural := 16; -- input source select lsb constant ctrl_rf_mux1_c : natural := 17; -- input source select msb -- alu -- constant ctrl_alu_op0_c : natural := 18; -- ALU operation select bit 0 constant ctrl_alu_op1_c : natural := 19; -- ALU operation select bit 1 constant ctrl_alu_op2_c : natural := 20; -- ALU operation select bit 2 constant ctrl_alu_opa_mux_c : natural := 21; -- operand A select (0=rs1, 1=PC) constant ctrl_alu_opb_mux_c : natural := 22; -- operand B select (0=rs2, 1=IMM) constant ctrl_alu_unsigned_c : natural := 23; -- is unsigned ALU operation constant ctrl_alu_shift_dir_c : natural := 24; -- shift direction (0=left, 1=right) constant ctrl_alu_shift_ar_c : natural := 25; -- is arithmetic shift constant ctrl_alu_frm0_c : natural := 26; -- FPU rounding mode bit 0 constant ctrl_alu_frm1_c : natural := 27; -- FPU rounding mode bit 1 constant ctrl_alu_frm2_c : natural := 28; -- FPU rounding mode bit 2 -- bus interface -- constant ctrl_bus_size_lsb_c : natural := 29; -- transfer size lsb (00=byte, 01=half-word) constant ctrl_bus_size_msb_c : natural := 30; -- transfer size msb (10=word, 11=?) constant ctrl_bus_rd_c : natural := 31; -- read data request constant ctrl_bus_wr_c : natural := 32; -- write data request constant ctrl_bus_if_c : natural := 33; -- instruction fetch request constant ctrl_bus_mo_we_c : natural := 34; -- memory address and data output register write enable constant ctrl_bus_mi_we_c : natural := 35; -- memory data input register write enable constant ctrl_bus_unsigned_c : natural := 36; -- is unsigned load constant ctrl_bus_fence_c : natural := 37; -- executed fence operation constant ctrl_bus_fencei_c : natural := 38; -- executed fencei operation constant ctrl_bus_lock_c : natural := 39; -- make atomic/exclusive access lock constant ctrl_bus_de_lock_c : natural := 40; -- remove atomic/exclusive access constant ctrl_bus_ch_lock_c : natural := 41; -- evaluate atomic/exclusive lock (SC operation) -- alu co-processors -- constant ctrl_cp_id_lsb_c : natural := 42; -- cp select ID lsb [ALIAS] constant ctrl_cp_trig0_c : natural := 42; -- trigger CP0 constant ctrl_cp_trig1_c : natural := 43; -- trigger CP1 constant ctrl_cp_trig2_c : natural := 44; -- trigger CP2 constant ctrl_cp_trig3_c : natural := 45; -- trigger CP3 constant ctrl_cp_trig4_c : natural := 46; -- trigger CP4 constant ctrl_cp_trig5_c : natural := 47; -- trigger CP5 constant ctrl_cp_trig6_c : natural := 48; -- trigger CP6 constant ctrl_cp_trig7_c : natural := 49; -- trigger CP7 constant ctrl_cp_id_msb_c : natural := 49; -- cp select ID msb [ALIAS] -- instruction word control blocks (used by cpu co-processors) -- constant ctrl_ir_funct3_0_c : natural := 50; -- funct3 bit 0 constant ctrl_ir_funct3_1_c : natural := 51; -- funct3 bit 1 constant ctrl_ir_funct3_2_c : natural := 52; -- funct3 bit 2 constant ctrl_ir_funct12_0_c : natural := 53; -- funct12 bit 0 constant ctrl_ir_funct12_1_c : natural := 54; -- funct12 bit 1 constant ctrl_ir_funct12_2_c : natural := 55; -- funct12 bit 2 constant ctrl_ir_funct12_3_c : natural := 56; -- funct12 bit 3 constant ctrl_ir_funct12_4_c : natural := 57; -- funct12 bit 4 constant ctrl_ir_funct12_5_c : natural := 58; -- funct12 bit 5 constant ctrl_ir_funct12_6_c : natural := 59; -- funct12 bit 6 constant ctrl_ir_funct12_7_c : natural := 60; -- funct12 bit 7 constant ctrl_ir_funct12_8_c : natural := 61; -- funct12 bit 8 constant ctrl_ir_funct12_9_c : natural := 62; -- funct12 bit 9 constant ctrl_ir_funct12_10_c : natural := 63; -- funct12 bit 10 constant ctrl_ir_funct12_11_c : natural := 64; -- funct12 bit 11 constant ctrl_ir_opcode7_0_c : natural := 65; -- opcode7 bit 0 constant ctrl_ir_opcode7_1_c : natural := 66; -- opcode7 bit 1 constant ctrl_ir_opcode7_2_c : natural := 67; -- opcode7 bit 2 constant ctrl_ir_opcode7_3_c : natural := 68; -- opcode7 bit 3 constant ctrl_ir_opcode7_4_c : natural := 69; -- opcode7 bit 4 constant ctrl_ir_opcode7_5_c : natural := 70; -- opcode7 bit 5 constant ctrl_ir_opcode7_6_c : natural := 71; -- opcode7 bit 6 -- cpu status -- constant ctrl_priv_mode_c : natural := 72; -- effective privilege mode constant ctrl_sleep_c : natural := 73; -- set when CPU is in sleep mode constant ctrl_trap_c : natural := 74; -- set when CPU is entering trap execution constant ctrl_debug_running_c : natural := 75; -- set when CPU is in debug mode -- control bus size -- constant ctrl_width_c : natural := 76; -- control bus size -- Comparator Bus ------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant cmp_equal_c : natural := 0; constant cmp_less_c : natural := 1; -- for signed and unsigned comparisons -- RISC-V 32-Bit Instruction Word Layout -------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant instr_opcode_lsb_c : natural := 0; -- opcode bit 0 constant instr_opcode_msb_c : natural := 6; -- opcode bit 6 constant instr_rd_lsb_c : natural := 7; -- destination register address bit 0 constant instr_rd_msb_c : natural := 11; -- destination register address bit 4 constant instr_funct3_lsb_c : natural := 12; -- funct3 bit 0 constant instr_funct3_msb_c : natural := 14; -- funct3 bit 2 constant instr_rs1_lsb_c : natural := 15; -- source register 1 address bit 0 constant instr_rs1_msb_c : natural := 19; -- source register 1 address bit 4 constant instr_rs2_lsb_c : natural := 20; -- source register 2 address bit 0 constant instr_rs2_msb_c : natural := 24; -- source register 2 address bit 4 constant instr_funct7_lsb_c : natural := 25; -- funct7 bit 0 constant instr_funct7_msb_c : natural := 31; -- funct7 bit 6 constant instr_funct12_lsb_c : natural := 20; -- funct12 bit 0 constant instr_funct12_msb_c : natural := 31; -- funct12 bit 11 constant instr_imm12_lsb_c : natural := 20; -- immediate12 bit 0 constant instr_imm12_msb_c : natural := 31; -- immediate12 bit 11 constant instr_imm20_lsb_c : natural := 12; -- immediate20 bit 0 constant instr_imm20_msb_c : natural := 31; -- immediate20 bit 21 constant instr_csr_id_lsb_c : natural := 20; -- csr select bit 0 constant instr_csr_id_msb_c : natural := 31; -- csr select bit 11 constant instr_funct5_lsb_c : natural := 27; -- funct5 select bit 0 constant instr_funct5_msb_c : natural := 31; -- funct5 select bit 4 -- RISC-V Opcodes ------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- alu -- constant opcode_lui_c : std_ulogic_vector(6 downto 0) := "0110111"; -- load upper immediate constant opcode_auipc_c : std_ulogic_vector(6 downto 0) := "0010111"; -- add upper immediate to PC constant opcode_alui_c : std_ulogic_vector(6 downto 0) := "0010011"; -- ALU operation with immediate (operation via funct3 and funct7) constant opcode_alu_c : std_ulogic_vector(6 downto 0) := "0110011"; -- ALU operation (operation via funct3 and funct7) -- control flow -- constant opcode_jal_c : std_ulogic_vector(6 downto 0) := "1101111"; -- jump and link constant opcode_jalr_c : std_ulogic_vector(6 downto 0) := "1100111"; -- jump and link with register constant opcode_branch_c : std_ulogic_vector(6 downto 0) := "1100011"; -- branch (condition set via funct3) -- memory access -- constant opcode_load_c : std_ulogic_vector(6 downto 0) := "0000011"; -- load (data type via funct3) constant opcode_store_c : std_ulogic_vector(6 downto 0) := "0100011"; -- store (data type via funct3) -- system/csr -- constant opcode_fence_c : std_ulogic_vector(6 downto 0) := "0001111"; -- fence / fence.i constant opcode_syscsr_c : std_ulogic_vector(6 downto 0) := "1110011"; -- system/csr access (type via funct3) -- atomic memory access (A) -- constant opcode_atomic_c : std_ulogic_vector(6 downto 0) := "0101111"; -- atomic operations (A extension) -- floating point operations (Zfinx-only) (F/D/H/Q) -- constant opcode_fop_c : std_ulogic_vector(6 downto 0) := "1010011"; -- dual/single operand instruction -- official "custom0/1" RISC-V opcodes - free for custom instructions -- constant opcode_cust0_c : std_ulogic_vector(6 downto 0) := "0001011"; -- custom instructions 0 --constant opcode_cust1_c : std_ulogic_vector(6 downto 0) := "0101011"; -- custom instructions 1 -- RISC-V Funct3 -------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- control flow -- constant funct3_beq_c : std_ulogic_vector(2 downto 0) := "000"; -- branch if equal constant funct3_bne_c : std_ulogic_vector(2 downto 0) := "001"; -- branch if not equal constant funct3_blt_c : std_ulogic_vector(2 downto 0) := "100"; -- branch if less than constant funct3_bge_c : std_ulogic_vector(2 downto 0) := "101"; -- branch if greater than or equal constant funct3_bltu_c : std_ulogic_vector(2 downto 0) := "110"; -- branch if less than (unsigned) constant funct3_bgeu_c : std_ulogic_vector(2 downto 0) := "111"; -- branch if greater than or equal (unsigned) -- memory access -- constant funct3_lb_c : std_ulogic_vector(2 downto 0) := "000"; -- load byte constant funct3_lh_c : std_ulogic_vector(2 downto 0) := "001"; -- load half word constant funct3_lw_c : std_ulogic_vector(2 downto 0) := "010"; -- load word constant funct3_lbu_c : std_ulogic_vector(2 downto 0) := "100"; -- load byte (unsigned) constant funct3_lhu_c : std_ulogic_vector(2 downto 0) := "101"; -- load half word (unsigned) constant funct3_sb_c : std_ulogic_vector(2 downto 0) := "000"; -- store byte constant funct3_sh_c : std_ulogic_vector(2 downto 0) := "001"; -- store half word constant funct3_sw_c : std_ulogic_vector(2 downto 0) := "010"; -- store word -- alu -- constant funct3_subadd_c : std_ulogic_vector(2 downto 0) := "000"; -- sub/add via funct7 constant funct3_sll_c : std_ulogic_vector(2 downto 0) := "001"; -- shift logical left constant funct3_slt_c : std_ulogic_vector(2 downto 0) := "010"; -- set on less constant funct3_sltu_c : std_ulogic_vector(2 downto 0) := "011"; -- set on less unsigned constant funct3_xor_c : std_ulogic_vector(2 downto 0) := "100"; -- xor constant funct3_sr_c : std_ulogic_vector(2 downto 0) := "101"; -- shift right via funct7 constant funct3_or_c : std_ulogic_vector(2 downto 0) := "110"; -- or constant funct3_and_c : std_ulogic_vector(2 downto 0) := "111"; -- and -- system/csr -- constant funct3_env_c : std_ulogic_vector(2 downto 0) := "000"; -- ecall, ebreak, mret, wfi, ... constant funct3_csrrw_c : std_ulogic_vector(2 downto 0) := "001"; -- csr r/w constant funct3_csrrs_c : std_ulogic_vector(2 downto 0) := "010"; -- csr read & set bit constant funct3_csrrc_c : std_ulogic_vector(2 downto 0) := "011"; -- csr read & clear bit constant funct3_csrrwi_c : std_ulogic_vector(2 downto 0) := "101"; -- csr r/w immediate constant funct3_csrrsi_c : std_ulogic_vector(2 downto 0) := "110"; -- csr read & set bit immediate constant funct3_csrrci_c : std_ulogic_vector(2 downto 0) := "111"; -- csr read & clear bit immediate -- fence -- constant funct3_fence_c : std_ulogic_vector(2 downto 0) := "000"; -- fence - order IO/memory access constant funct3_fencei_c : std_ulogic_vector(2 downto 0) := "001"; -- fencei - instruction stream sync -- RISC-V Funct12 ------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- system -- constant funct12_ecall_c : std_ulogic_vector(11 downto 0) := x"000"; -- ecall constant funct12_ebreak_c : std_ulogic_vector(11 downto 0) := x"001"; -- ebreak constant funct12_mret_c : std_ulogic_vector(11 downto 0) := x"302"; -- mret constant funct12_wfi_c : std_ulogic_vector(11 downto 0) := x"105"; -- wfi constant funct12_dret_c : std_ulogic_vector(11 downto 0) := x"7b2"; -- dret -- RISC-V Funct5 -------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- atomic operations -- constant funct5_a_lr_c : std_ulogic_vector(4 downto 0) := "00010"; -- lr.w constant funct5_a_sc_c : std_ulogic_vector(4 downto 0) := "00011"; -- sc.w -- RISC-V Floating-Point Stuff ------------------------------------------------------------ -- ------------------------------------------------------------------------------------------- -- formats -- constant float_single_c : std_ulogic_vector(1 downto 0) := "00"; -- single-precision (32-bit) --constant float_double_c : std_ulogic_vector(1 downto 0) := "01"; -- double-precision (64-bit) --constant float_half_c : std_ulogic_vector(1 downto 0) := "10"; -- half-precision (16-bit) --constant float_quad_c : std_ulogic_vector(1 downto 0) := "11"; -- quad-precision (128-bit) -- number class flags -- constant fp_class_neg_inf_c : natural := 0; -- negative infinity constant fp_class_neg_norm_c : natural := 1; -- negative normal number constant fp_class_neg_denorm_c : natural := 2; -- negative subnormal number constant fp_class_neg_zero_c : natural := 3; -- negative zero constant fp_class_pos_zero_c : natural := 4; -- positive zero constant fp_class_pos_denorm_c : natural := 5; -- positive subnormal number constant fp_class_pos_norm_c : natural := 6; -- positive normal number constant fp_class_pos_inf_c : natural := 7; -- positive infinity constant fp_class_snan_c : natural := 8; -- signaling NaN (sNaN) constant fp_class_qnan_c : natural := 9; -- quiet NaN (qNaN) -- exception flags -- constant fp_exc_nv_c : natural := 0; -- invalid operation constant fp_exc_dz_c : natural := 1; -- divide by zero constant fp_exc_of_c : natural := 2; -- overflow constant fp_exc_uf_c : natural := 3; -- underflow constant fp_exc_nx_c : natural := 4; -- inexact -- special values (single-precision) -- constant fp_single_qnan_c : std_ulogic_vector(31 downto 0) := x"7fc00000"; -- quiet NaN constant fp_single_snan_c : std_ulogic_vector(31 downto 0) := x"7fa00000"; -- signaling NaN constant fp_single_pos_inf_c : std_ulogic_vector(31 downto 0) := x"7f800000"; -- positive infinity constant fp_single_neg_inf_c : std_ulogic_vector(31 downto 0) := x"ff800000"; -- negative infinity constant fp_single_pos_zero_c : std_ulogic_vector(31 downto 0) := x"00000000"; -- positive zero constant fp_single_neg_zero_c : std_ulogic_vector(31 downto 0) := x"80000000"; -- negative zero -- RISC-V CSR Addresses ------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- <<< standard read/write CSRs >>> -- -- user floating-point CSRs -- constant csr_class_float_c : std_ulogic_vector(09 downto 0) := x"00" & "00"; -- floating point constant csr_fflags_c : std_ulogic_vector(11 downto 0) := x"001"; constant csr_frm_c : std_ulogic_vector(11 downto 0) := x"002"; constant csr_fcsr_c : std_ulogic_vector(11 downto 0) := x"003"; -- machine trap setup -- constant csr_class_setup_c : std_ulogic_vector(08 downto 0) := x"30" & '0'; -- trap setup constant csr_mstatus_c : std_ulogic_vector(11 downto 0) := x"300"; constant csr_misa_c : std_ulogic_vector(11 downto 0) := x"301"; constant csr_mie_c : std_ulogic_vector(11 downto 0) := x"304"; constant csr_mtvec_c : std_ulogic_vector(11 downto 0) := x"305"; constant csr_mcounteren_c : std_ulogic_vector(11 downto 0) := x"306"; -- constant csr_mstatush_c : std_ulogic_vector(11 downto 0) := x"310"; -- machine configuration -- constant csr_class_envcfg_c : std_ulogic_vector(06 downto 0) := x"3" & "000"; -- configuration constant csr_menvcfg_c : std_ulogic_vector(11 downto 0) := x"30a"; constant csr_menvcfgh_c : std_ulogic_vector(11 downto 0) := x"31a"; -- machine counter setup -- constant csr_cnt_setup_c : std_ulogic_vector(06 downto 0) := x"3" & "001"; -- counter setup constant csr_mcountinhibit_c : std_ulogic_vector(11 downto 0) := x"320"; constant csr_mhpmevent3_c : std_ulogic_vector(11 downto 0) := x"323"; constant csr_mhpmevent4_c : std_ulogic_vector(11 downto 0) := x"324"; constant csr_mhpmevent5_c : std_ulogic_vector(11 downto 0) := x"325"; constant csr_mhpmevent6_c : std_ulogic_vector(11 downto 0) := x"326"; constant csr_mhpmevent7_c : std_ulogic_vector(11 downto 0) := x"327"; constant csr_mhpmevent8_c : std_ulogic_vector(11 downto 0) := x"328"; constant csr_mhpmevent9_c : std_ulogic_vector(11 downto 0) := x"329"; constant csr_mhpmevent10_c : std_ulogic_vector(11 downto 0) := x"32a"; constant csr_mhpmevent11_c : std_ulogic_vector(11 downto 0) := x"32b"; constant csr_mhpmevent12_c : std_ulogic_vector(11 downto 0) := x"32c"; constant csr_mhpmevent13_c : std_ulogic_vector(11 downto 0) := x"32d"; constant csr_mhpmevent14_c : std_ulogic_vector(11 downto 0) := x"32e"; constant csr_mhpmevent15_c : std_ulogic_vector(11 downto 0) := x"32f"; constant csr_mhpmevent16_c : std_ulogic_vector(11 downto 0) := x"330"; constant csr_mhpmevent17_c : std_ulogic_vector(11 downto 0) := x"331"; constant csr_mhpmevent18_c : std_ulogic_vector(11 downto 0) := x"332"; constant csr_mhpmevent19_c : std_ulogic_vector(11 downto 0) := x"333"; constant csr_mhpmevent20_c : std_ulogic_vector(11 downto 0) := x"334"; constant csr_mhpmevent21_c : std_ulogic_vector(11 downto 0) := x"335"; constant csr_mhpmevent22_c : std_ulogic_vector(11 downto 0) := x"336"; constant csr_mhpmevent23_c : std_ulogic_vector(11 downto 0) := x"337"; constant csr_mhpmevent24_c : std_ulogic_vector(11 downto 0) := x"338"; constant csr_mhpmevent25_c : std_ulogic_vector(11 downto 0) := x"339"; constant csr_mhpmevent26_c : std_ulogic_vector(11 downto 0) := x"33a"; constant csr_mhpmevent27_c : std_ulogic_vector(11 downto 0) := x"33b"; constant csr_mhpmevent28_c : std_ulogic_vector(11 downto 0) := x"33c"; constant csr_mhpmevent29_c : std_ulogic_vector(11 downto 0) := x"33d"; constant csr_mhpmevent30_c : std_ulogic_vector(11 downto 0) := x"33e"; constant csr_mhpmevent31_c : std_ulogic_vector(11 downto 0) := x"33f"; -- machine trap handling -- constant csr_class_trap_c : std_ulogic_vector(07 downto 0) := x"34"; -- machine trap handling constant csr_mscratch_c : std_ulogic_vector(11 downto 0) := x"340"; constant csr_mepc_c : std_ulogic_vector(11 downto 0) := x"341"; constant csr_mcause_c : std_ulogic_vector(11 downto 0) := x"342"; constant csr_mtval_c : std_ulogic_vector(11 downto 0) := x"343"; constant csr_mip_c : std_ulogic_vector(11 downto 0) := x"344"; -- physical memory protection - configuration -- constant csr_class_pmpcfg_c : std_ulogic_vector(09 downto 0) := x"3a" & "00"; -- pmp configuration constant csr_pmpcfg0_c : std_ulogic_vector(11 downto 0) := x"3a0"; constant csr_pmpcfg1_c : std_ulogic_vector(11 downto 0) := x"3a1"; constant csr_pmpcfg2_c : std_ulogic_vector(11 downto 0) := x"3a2"; constant csr_pmpcfg3_c : std_ulogic_vector(11 downto 0) := x"3a3"; -- physical memory protection - address -- constant csr_class_pmpaddr_c : std_ulogic_vector(07 downto 0) := x"3b"; -- pmp address constant csr_pmpaddr0_c : std_ulogic_vector(11 downto 0) := x"3b0"; constant csr_pmpaddr1_c : std_ulogic_vector(11 downto 0) := x"3b1"; constant csr_pmpaddr2_c : std_ulogic_vector(11 downto 0) := x"3b2"; constant csr_pmpaddr3_c : std_ulogic_vector(11 downto 0) := x"3b3"; constant csr_pmpaddr4_c : std_ulogic_vector(11 downto 0) := x"3b4"; constant csr_pmpaddr5_c : std_ulogic_vector(11 downto 0) := x"3b5"; constant csr_pmpaddr6_c : std_ulogic_vector(11 downto 0) := x"3b6"; constant csr_pmpaddr7_c : std_ulogic_vector(11 downto 0) := x"3b7"; constant csr_pmpaddr8_c : std_ulogic_vector(11 downto 0) := x"3b8"; constant csr_pmpaddr9_c : std_ulogic_vector(11 downto 0) := x"3b9"; constant csr_pmpaddr10_c : std_ulogic_vector(11 downto 0) := x"3ba"; constant csr_pmpaddr11_c : std_ulogic_vector(11 downto 0) := x"3bb"; constant csr_pmpaddr12_c : std_ulogic_vector(11 downto 0) := x"3bc"; constant csr_pmpaddr13_c : std_ulogic_vector(11 downto 0) := x"3bd"; constant csr_pmpaddr14_c : std_ulogic_vector(11 downto 0) := x"3be"; constant csr_pmpaddr15_c : std_ulogic_vector(11 downto 0) := x"3bf"; -- trigger module registers -- constant csr_class_trigger_c : std_ulogic_vector(07 downto 0) := x"7a"; -- trigger registers constant csr_tselect_c : std_ulogic_vector(11 downto 0) := x"7a0"; constant csr_tdata1_c : std_ulogic_vector(11 downto 0) := x"7a1"; constant csr_tdata2_c : std_ulogic_vector(11 downto 0) := x"7a2"; constant csr_tdata3_c : std_ulogic_vector(11 downto 0) := x"7a3"; constant csr_tinfo_c : std_ulogic_vector(11 downto 0) := x"7a4"; constant csr_tcontrol_c : std_ulogic_vector(11 downto 0) := x"7a5"; constant csr_mcontext_c : std_ulogic_vector(11 downto 0) := x"7a8"; constant csr_scontext_c : std_ulogic_vector(11 downto 0) := x"7aa"; -- debug mode registers -- constant csr_class_debug_c : std_ulogic_vector(09 downto 0) := x"7b" & "00"; -- debug registers constant csr_dcsr_c : std_ulogic_vector(11 downto 0) := x"7b0"; constant csr_dpc_c : std_ulogic_vector(11 downto 0) := x"7b1"; constant csr_dscratch0_c : std_ulogic_vector(11 downto 0) := x"7b2"; -- machine counters/timers -- constant csr_mcycle_c : std_ulogic_vector(11 downto 0) := x"b00"; constant csr_minstret_c : std_ulogic_vector(11 downto 0) := x"b02"; -- constant csr_mhpmcounter3_c : std_ulogic_vector(11 downto 0) := x"b03"; constant csr_mhpmcounter4_c : std_ulogic_vector(11 downto 0) := x"b04"; constant csr_mhpmcounter5_c : std_ulogic_vector(11 downto 0) := x"b05"; constant csr_mhpmcounter6_c : std_ulogic_vector(11 downto 0) := x"b06"; constant csr_mhpmcounter7_c : std_ulogic_vector(11 downto 0) := x"b07"; constant csr_mhpmcounter8_c : std_ulogic_vector(11 downto 0) := x"b08"; constant csr_mhpmcounter9_c : std_ulogic_vector(11 downto 0) := x"b09"; constant csr_mhpmcounter10_c : std_ulogic_vector(11 downto 0) := x"b0a"; constant csr_mhpmcounter11_c : std_ulogic_vector(11 downto 0) := x"b0b"; constant csr_mhpmcounter12_c : std_ulogic_vector(11 downto 0) := x"b0c"; constant csr_mhpmcounter13_c : std_ulogic_vector(11 downto 0) := x"b0d"; constant csr_mhpmcounter14_c : std_ulogic_vector(11 downto 0) := x"b0e"; constant csr_mhpmcounter15_c : std_ulogic_vector(11 downto 0) := x"b0f"; constant csr_mhpmcounter16_c : std_ulogic_vector(11 downto 0) := x"b10"; constant csr_mhpmcounter17_c : std_ulogic_vector(11 downto 0) := x"b11"; constant csr_mhpmcounter18_c : std_ulogic_vector(11 downto 0) := x"b12"; constant csr_mhpmcounter19_c : std_ulogic_vector(11 downto 0) := x"b13"; constant csr_mhpmcounter20_c : std_ulogic_vector(11 downto 0) := x"b14"; constant csr_mhpmcounter21_c : std_ulogic_vector(11 downto 0) := x"b15"; constant csr_mhpmcounter22_c : std_ulogic_vector(11 downto 0) := x"b16"; constant csr_mhpmcounter23_c : std_ulogic_vector(11 downto 0) := x"b17"; constant csr_mhpmcounter24_c : std_ulogic_vector(11 downto 0) := x"b18"; constant csr_mhpmcounter25_c : std_ulogic_vector(11 downto 0) := x"b19"; constant csr_mhpmcounter26_c : std_ulogic_vector(11 downto 0) := x"b1a"; constant csr_mhpmcounter27_c : std_ulogic_vector(11 downto 0) := x"b1b"; constant csr_mhpmcounter28_c : std_ulogic_vector(11 downto 0) := x"b1c"; constant csr_mhpmcounter29_c : std_ulogic_vector(11 downto 0) := x"b1d"; constant csr_mhpmcounter30_c : std_ulogic_vector(11 downto 0) := x"b1e"; constant csr_mhpmcounter31_c : std_ulogic_vector(11 downto 0) := x"b1f"; -- constant csr_mcycleh_c : std_ulogic_vector(11 downto 0) := x"b80"; constant csr_minstreth_c : std_ulogic_vector(11 downto 0) := x"b82"; -- constant csr_mhpmcounter3h_c : std_ulogic_vector(11 downto 0) := x"b83"; constant csr_mhpmcounter4h_c : std_ulogic_vector(11 downto 0) := x"b84"; constant csr_mhpmcounter5h_c : std_ulogic_vector(11 downto 0) := x"b85"; constant csr_mhpmcounter6h_c : std_ulogic_vector(11 downto 0) := x"b86"; constant csr_mhpmcounter7h_c : std_ulogic_vector(11 downto 0) := x"b87"; constant csr_mhpmcounter8h_c : std_ulogic_vector(11 downto 0) := x"b88"; constant csr_mhpmcounter9h_c : std_ulogic_vector(11 downto 0) := x"b89"; constant csr_mhpmcounter10h_c : std_ulogic_vector(11 downto 0) := x"b8a"; constant csr_mhpmcounter11h_c : std_ulogic_vector(11 downto 0) := x"b8b"; constant csr_mhpmcounter12h_c : std_ulogic_vector(11 downto 0) := x"b8c"; constant csr_mhpmcounter13h_c : std_ulogic_vector(11 downto 0) := x"b8d"; constant csr_mhpmcounter14h_c : std_ulogic_vector(11 downto 0) := x"b8e"; constant csr_mhpmcounter15h_c : std_ulogic_vector(11 downto 0) := x"b8f"; constant csr_mhpmcounter16h_c : std_ulogic_vector(11 downto 0) := x"b90"; constant csr_mhpmcounter17h_c : std_ulogic_vector(11 downto 0) := x"b91"; constant csr_mhpmcounter18h_c : std_ulogic_vector(11 downto 0) := x"b92"; constant csr_mhpmcounter19h_c : std_ulogic_vector(11 downto 0) := x"b93"; constant csr_mhpmcounter20h_c : std_ulogic_vector(11 downto 0) := x"b94"; constant csr_mhpmcounter21h_c : std_ulogic_vector(11 downto 0) := x"b95"; constant csr_mhpmcounter22h_c : std_ulogic_vector(11 downto 0) := x"b96"; constant csr_mhpmcounter23h_c : std_ulogic_vector(11 downto 0) := x"b97"; constant csr_mhpmcounter24h_c : std_ulogic_vector(11 downto 0) := x"b98"; constant csr_mhpmcounter25h_c : std_ulogic_vector(11 downto 0) := x"b99"; constant csr_mhpmcounter26h_c : std_ulogic_vector(11 downto 0) := x"b9a"; constant csr_mhpmcounter27h_c : std_ulogic_vector(11 downto 0) := x"b9b"; constant csr_mhpmcounter28h_c : std_ulogic_vector(11 downto 0) := x"b9c"; constant csr_mhpmcounter29h_c : std_ulogic_vector(11 downto 0) := x"b9d"; constant csr_mhpmcounter30h_c : std_ulogic_vector(11 downto 0) := x"b9e"; constant csr_mhpmcounter31h_c : std_ulogic_vector(11 downto 0) := x"b9f"; -- <<< standard read-only CSRs >>> -- -- user counters/timers -- constant csr_cycle_c : std_ulogic_vector(11 downto 0) := x"c00"; constant csr_time_c : std_ulogic_vector(11 downto 0) := x"c01"; constant csr_instret_c : std_ulogic_vector(11 downto 0) := x"c02"; -- constant csr_hpmcounter3_c : std_ulogic_vector(11 downto 0) := x"c03"; constant csr_hpmcounter4_c : std_ulogic_vector(11 downto 0) := x"c04"; constant csr_hpmcounter5_c : std_ulogic_vector(11 downto 0) := x"c05"; constant csr_hpmcounter6_c : std_ulogic_vector(11 downto 0) := x"c06"; constant csr_hpmcounter7_c : std_ulogic_vector(11 downto 0) := x"c07"; constant csr_hpmcounter8_c : std_ulogic_vector(11 downto 0) := x"c08"; constant csr_hpmcounter9_c : std_ulogic_vector(11 downto 0) := x"c09"; constant csr_hpmcounter10_c : std_ulogic_vector(11 downto 0) := x"c0a"; constant csr_hpmcounter11_c : std_ulogic_vector(11 downto 0) := x"c0b"; constant csr_hpmcounter12_c : std_ulogic_vector(11 downto 0) := x"c0c"; constant csr_hpmcounter13_c : std_ulogic_vector(11 downto 0) := x"c0d"; constant csr_hpmcounter14_c : std_ulogic_vector(11 downto 0) := x"c0e"; constant csr_hpmcounter15_c : std_ulogic_vector(11 downto 0) := x"c0f"; constant csr_hpmcounter16_c : std_ulogic_vector(11 downto 0) := x"c10"; constant csr_hpmcounter17_c : std_ulogic_vector(11 downto 0) := x"c11"; constant csr_hpmcounter18_c : std_ulogic_vector(11 downto 0) := x"c12"; constant csr_hpmcounter19_c : std_ulogic_vector(11 downto 0) := x"c13"; constant csr_hpmcounter20_c : std_ulogic_vector(11 downto 0) := x"c14"; constant csr_hpmcounter21_c : std_ulogic_vector(11 downto 0) := x"c15"; constant csr_hpmcounter22_c : std_ulogic_vector(11 downto 0) := x"c16"; constant csr_hpmcounter23_c : std_ulogic_vector(11 downto 0) := x"c17"; constant csr_hpmcounter24_c : std_ulogic_vector(11 downto 0) := x"c18"; constant csr_hpmcounter25_c : std_ulogic_vector(11 downto 0) := x"c19"; constant csr_hpmcounter26_c : std_ulogic_vector(11 downto 0) := x"c1a"; constant csr_hpmcounter27_c : std_ulogic_vector(11 downto 0) := x"c1b"; constant csr_hpmcounter28_c : std_ulogic_vector(11 downto 0) := x"c1c"; constant csr_hpmcounter29_c : std_ulogic_vector(11 downto 0) := x"c1d"; constant csr_hpmcounter30_c : std_ulogic_vector(11 downto 0) := x"c1e"; constant csr_hpmcounter31_c : std_ulogic_vector(11 downto 0) := x"c1f"; -- constant csr_cycleh_c : std_ulogic_vector(11 downto 0) := x"c80"; constant csr_timeh_c : std_ulogic_vector(11 downto 0) := x"c81"; constant csr_instreth_c : std_ulogic_vector(11 downto 0) := x"c82"; -- constant csr_hpmcounter3h_c : std_ulogic_vector(11 downto 0) := x"c83"; constant csr_hpmcounter4h_c : std_ulogic_vector(11 downto 0) := x"c84"; constant csr_hpmcounter5h_c : std_ulogic_vector(11 downto 0) := x"c85"; constant csr_hpmcounter6h_c : std_ulogic_vector(11 downto 0) := x"c86"; constant csr_hpmcounter7h_c : std_ulogic_vector(11 downto 0) := x"c87"; constant csr_hpmcounter8h_c : std_ulogic_vector(11 downto 0) := x"c88"; constant csr_hpmcounter9h_c : std_ulogic_vector(11 downto 0) := x"c89"; constant csr_hpmcounter10h_c : std_ulogic_vector(11 downto 0) := x"c8a"; constant csr_hpmcounter11h_c : std_ulogic_vector(11 downto 0) := x"c8b"; constant csr_hpmcounter12h_c : std_ulogic_vector(11 downto 0) := x"c8c"; constant csr_hpmcounter13h_c : std_ulogic_vector(11 downto 0) := x"c8d"; constant csr_hpmcounter14h_c : std_ulogic_vector(11 downto 0) := x"c8e"; constant csr_hpmcounter15h_c : std_ulogic_vector(11 downto 0) := x"c8f"; constant csr_hpmcounter16h_c : std_ulogic_vector(11 downto 0) := x"c90"; constant csr_hpmcounter17h_c : std_ulogic_vector(11 downto 0) := x"c91"; constant csr_hpmcounter18h_c : std_ulogic_vector(11 downto 0) := x"c92"; constant csr_hpmcounter19h_c : std_ulogic_vector(11 downto 0) := x"c93"; constant csr_hpmcounter20h_c : std_ulogic_vector(11 downto 0) := x"c94"; constant csr_hpmcounter21h_c : std_ulogic_vector(11 downto 0) := x"c95"; constant csr_hpmcounter22h_c : std_ulogic_vector(11 downto 0) := x"c96"; constant csr_hpmcounter23h_c : std_ulogic_vector(11 downto 0) := x"c97"; constant csr_hpmcounter24h_c : std_ulogic_vector(11 downto 0) := x"c98"; constant csr_hpmcounter25h_c : std_ulogic_vector(11 downto 0) := x"c99"; constant csr_hpmcounter26h_c : std_ulogic_vector(11 downto 0) := x"c9a"; constant csr_hpmcounter27h_c : std_ulogic_vector(11 downto 0) := x"c9b"; constant csr_hpmcounter28h_c : std_ulogic_vector(11 downto 0) := x"c9c"; constant csr_hpmcounter29h_c : std_ulogic_vector(11 downto 0) := x"c9d"; constant csr_hpmcounter30h_c : std_ulogic_vector(11 downto 0) := x"c9e"; constant csr_hpmcounter31h_c : std_ulogic_vector(11 downto 0) := x"c9f"; -- machine information registers -- constant csr_mvendorid_c : std_ulogic_vector(11 downto 0) := x"f11"; constant csr_marchid_c : std_ulogic_vector(11 downto 0) := x"f12"; constant csr_mimpid_c : std_ulogic_vector(11 downto 0) := x"f13"; constant csr_mhartid_c : std_ulogic_vector(11 downto 0) := x"f14"; constant csr_mconfigptr_c : std_ulogic_vector(11 downto 0) := x"f15"; -- <<< NEORV32-specific (custom) read-only CSRs >>> --- -- machine extended ISA extensions information -- constant csr_mxisa_c : std_ulogic_vector(11 downto 0) := x"fc0"; -- CPU Co-Processor IDs (one-hot!) -------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant cp_sel_shifter_c : std_ulogic_vector(7 downto 0) := "00000001"; -- CP0: shift operations (base ISA) constant cp_sel_muldiv_c : std_ulogic_vector(7 downto 0) := "00000010"; -- CP1: multiplication/division operations ('M' extensions) constant cp_sel_bitmanip_c : std_ulogic_vector(7 downto 0) := "00000100"; -- CP2: bit manipulation ('B' extensions) constant cp_sel_fpu_c : std_ulogic_vector(7 downto 0) := "00001000"; -- CP3: floating-point unit ('Zfinx' extension) constant cp_sel_cfu_c : std_ulogic_vector(7 downto 0) := "00010000"; -- CP4: custom instructions CFU ('Zxcfu' extension) --constant cp_sel_res5_c : std_ulogic_vector(7 downto 0) := "00100000"; -- CP5: reserved --constant cp_sel_res6_c : std_ulogic_vector(7 downto 0) := "01000000"; -- CP6: reserved --constant cp_sel_res7_c : std_ulogic_vector(7 downto 0) := "10000000"; -- CP7: reserved -- ALU Function Codes [DO NOT CHANGE ENCODING!] ------------------------------------------- -- ------------------------------------------------------------------------------------------- constant alu_op_add_c : std_ulogic_vector(2 downto 0) := "000"; -- result <= A + B constant alu_op_sub_c : std_ulogic_vector(2 downto 0) := "001"; -- result <= A - B constant alu_op_cp_c : std_ulogic_vector(2 downto 0) := "010"; -- result <= co-processor constant alu_op_slt_c : std_ulogic_vector(2 downto 0) := "011"; -- result <= A < B constant alu_op_movb_c : std_ulogic_vector(2 downto 0) := "100"; -- result <= B constant alu_op_xor_c : std_ulogic_vector(2 downto 0) := "101"; -- result <= A xor B constant alu_op_or_c : std_ulogic_vector(2 downto 0) := "110"; -- result <= A or B constant alu_op_and_c : std_ulogic_vector(2 downto 0) := "111"; -- result <= A and B -- Register File Input Select ------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant rf_mux_alu_c : std_ulogic_vector(1 downto 0) := "00"; -- register file <= alu result constant rf_mux_mem_c : std_ulogic_vector(1 downto 0) := "01"; -- register file <= memory read data constant rf_mux_csr_c : std_ulogic_vector(1 downto 0) := "10"; -- register file <= CSR read data constant rf_mux_npc_c : std_ulogic_vector(1 downto 0) := "11"; -- register file <= next-PC (for branch-and-link) -- Trap ID Codes -------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- MSB: 1 = async exception (IRQ), 0 = sync exception (e.g. ebreak) -- MSB-1: 1 = entry to debug mode, 0 = normal trapping -- RISC-V compliant synchronous exceptions -- constant trap_ima_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00000"; -- 0.0: instruction misaligned constant trap_iba_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00001"; -- 0.1: instruction access fault constant trap_iil_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00010"; -- 0.2: illegal instruction constant trap_brk_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00011"; -- 0.3: breakpoint constant trap_lma_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00100"; -- 0.4: load address misaligned constant trap_lbe_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00101"; -- 0.5: load access fault constant trap_sma_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00110"; -- 0.6: store address misaligned constant trap_sbe_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "00111"; -- 0.7: store access fault constant trap_uenv_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "01000"; -- 0.8: environment call from u-mode --constant trap_senv_c x : std_ulogic_vector(6 downto 0) := "0" & "0" & "01001"; -- 0.9: environment call from s-mode --constant trap_henv_c x : std_ulogic_vector(6 downto 0) := "0" & "0" & "01010"; -- 0.10: environment call from h-mode constant trap_menv_c : std_ulogic_vector(6 downto 0) := "0" & "0" & "01011"; -- 0.11: environment call from m-mode --constant trap_ipf_c x : std_ulogic_vector(6 downto 0) := "0" & "0" & "01100"; -- 0.12: instruction page fault --constant trap_lpf_c x : std_ulogic_vector(6 downto 0) := "0" & "0" & "01101"; -- 0.13: load page fault --constant trap_???_c x : std_ulogic_vector(6 downto 0) := "0" & "0" & "01110"; -- 0.14: reserved --constant trap_lpf_c x : std_ulogic_vector(6 downto 0) := "0" & "0" & "01111"; -- 0.15: store page fault -- NEORV32-specific (custom) synchronous exceptions -- -- none implemented yet -- RISC-V compliant asynchronous exceptions (interrupts) -- constant trap_msi_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "00011"; -- 1.3: machine software interrupt constant trap_mti_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "00111"; -- 1.7: machine timer interrupt constant trap_mei_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "01011"; -- 1.11: machine external interrupt -- NEORV32-specific (custom) asynchronous exceptions (interrupts) -- constant trap_firq0_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10000"; -- 1.16: fast interrupt 0 constant trap_firq1_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10001"; -- 1.17: fast interrupt 1 constant trap_firq2_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10010"; -- 1.18: fast interrupt 2 constant trap_firq3_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10011"; -- 1.19: fast interrupt 3 constant trap_firq4_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10100"; -- 1.20: fast interrupt 4 constant trap_firq5_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10101"; -- 1.21: fast interrupt 5 constant trap_firq6_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10110"; -- 1.22: fast interrupt 6 constant trap_firq7_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "10111"; -- 1.23: fast interrupt 7 constant trap_firq8_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11000"; -- 1.24: fast interrupt 8 constant trap_firq9_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11001"; -- 1.25: fast interrupt 9 constant trap_firq10_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11010"; -- 1.26: fast interrupt 10 constant trap_firq11_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11011"; -- 1.27: fast interrupt 11 constant trap_firq12_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11100"; -- 1.28: fast interrupt 12 constant trap_firq13_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11101"; -- 1.29: fast interrupt 13 constant trap_firq14_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11110"; -- 1.30: fast interrupt 14 constant trap_firq15_c : std_ulogic_vector(6 downto 0) := "1" & "0" & "11111"; -- 1.31: fast interrupt 15 -- entering debug mode (sync./async. exceptions) -- constant trap_db_break_c : std_ulogic_vector(6 downto 0) := "0" & "1" & "00001"; -- break instruction (sync) constant trap_db_hw_c : std_ulogic_vector(6 downto 0) := "0" & "1" & "00010"; -- hardware trigger (sync) constant trap_db_halt_c : std_ulogic_vector(6 downto 0) := "1" & "1" & "00011"; -- external halt request (async) constant trap_db_step_c : std_ulogic_vector(6 downto 0) := "1" & "1" & "00100"; -- single-stepping (async) -- CPU Control Exception System ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- exception source bits -- constant exc_iaccess_c : natural := 0; -- instruction access fault constant exc_iillegal_c : natural := 1; -- illegal instruction constant exc_ialign_c : natural := 2; -- instruction address misaligned constant exc_m_envcall_c : natural := 3; -- ENV call from m-mode constant exc_u_envcall_c : natural := 4; -- ENV call from u-mode constant exc_break_c : natural := 5; -- breakpoint constant exc_salign_c : natural := 6; -- store address misaligned constant exc_lalign_c : natural := 7; -- load address misaligned constant exc_saccess_c : natural := 8; -- store access fault constant exc_laccess_c : natural := 9; -- load access fault -- for debug mode only -- constant exc_db_break_c : natural := 10; -- enter debug mode via ebreak instruction ("sync EXCEPTION") constant exc_db_hw_c : natural := 11; -- enter debug mode via hw trigger ("sync EXCEPTION") -- constant exc_width_c : natural := 12; -- length of this list in bits -- interrupt source bits -- constant irq_msw_irq_c : natural := 0; -- machine software interrupt constant irq_mtime_irq_c : natural := 1; -- machine timer interrupt constant irq_mext_irq_c : natural := 2; -- machine external interrupt constant irq_firq_0_c : natural := 3; -- fast interrupt channel 0 constant irq_firq_1_c : natural := 4; -- fast interrupt channel 1 constant irq_firq_2_c : natural := 5; -- fast interrupt channel 2 constant irq_firq_3_c : natural := 6; -- fast interrupt channel 3 constant irq_firq_4_c : natural := 7; -- fast interrupt channel 4 constant irq_firq_5_c : natural := 8; -- fast interrupt channel 5 constant irq_firq_6_c : natural := 9; -- fast interrupt channel 6 constant irq_firq_7_c : natural := 10; -- fast interrupt channel 7 constant irq_firq_8_c : natural := 11; -- fast interrupt channel 8 constant irq_firq_9_c : natural := 12; -- fast interrupt channel 9 constant irq_firq_10_c : natural := 13; -- fast interrupt channel 10 constant irq_firq_11_c : natural := 14; -- fast interrupt channel 11 constant irq_firq_12_c : natural := 15; -- fast interrupt channel 12 constant irq_firq_13_c : natural := 16; -- fast interrupt channel 13 constant irq_firq_14_c : natural := 17; -- fast interrupt channel 14 constant irq_firq_15_c : natural := 18; -- fast interrupt channel 15 -- for debug mode only -- constant irq_db_halt_c : natural := 19; -- enter debug mode via external halt request ("async IRQ") constant irq_db_step_c : natural := 20; -- enter debug mode via single-stepping ("async IRQ") -- constant irq_width_c : natural := 21; -- length of this list in bits -- CPU Privilege Modes -------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant priv_mode_m_c : std_ulogic := '1'; -- machine mode constant priv_mode_u_c : std_ulogic := '0'; -- user mode -- HPM Event System ----------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant hpmcnt_event_cy_c : natural := 0; -- Active cycle constant hpmcnt_event_never_c : natural := 1; -- Unused / never (actually, this would be used for TIME) constant hpmcnt_event_ir_c : natural := 2; -- Retired instruction constant hpmcnt_event_cir_c : natural := 3; -- Retired compressed instruction constant hpmcnt_event_wait_if_c : natural := 4; -- Instruction fetch memory wait cycle constant hpmcnt_event_wait_ii_c : natural := 5; -- Instruction issue wait cycle constant hpmcnt_event_wait_mc_c : natural := 6; -- Multi-cycle ALU-operation wait cycle constant hpmcnt_event_load_c : natural := 7; -- Load operation constant hpmcnt_event_store_c : natural := 8; -- Store operation constant hpmcnt_event_wait_ls_c : natural := 9; -- Load/store memory wait cycle constant hpmcnt_event_jump_c : natural := 10; -- Unconditional jump constant hpmcnt_event_branch_c : natural := 11; -- Conditional branch (taken or not taken) constant hpmcnt_event_tbranch_c : natural := 12; -- Conditional taken branch constant hpmcnt_event_trap_c : natural := 13; -- Entered trap constant hpmcnt_event_illegal_c : natural := 14; -- Illegal instruction exception -- constant hpmcnt_event_size_c : natural := 15; -- length of this list -- SoC Clock Generator -------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant clk_div2_c : natural := 0; constant clk_div4_c : natural := 1; constant clk_div8_c : natural := 2; constant clk_div64_c : natural := 3; constant clk_div128_c : natural := 4; constant clk_div1024_c : natural := 5; constant clk_div2048_c : natural := 6; constant clk_div4096_c : natural := 7; -- Component: NEORV32 Processor Top Entity ------------------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_top generic ( -- General -- CLOCK_FREQUENCY : natural; -- clock frequency of clk_i in Hz HW_THREAD_ID : natural := 0; -- hardware thread id (32-bit) INT_BOOTLOADER_EN : boolean := false; -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM -- On-Chip Debugger (OCD) -- ON_CHIP_DEBUGGER_EN : boolean := false; -- implement on-chip debugger -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_A : boolean := false; -- implement atomic extension? CPU_EXTENSION_RISCV_B : boolean := false; -- implement bit-manipulation extension? CPU_EXTENSION_RISCV_C : boolean := false; -- implement compressed extension? CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension? CPU_EXTENSION_RISCV_M : boolean := false; -- implement mul/div extension? CPU_EXTENSION_RISCV_U : boolean := false; -- implement user mode extension? CPU_EXTENSION_RISCV_Zfinx : boolean := false; -- implement 32-bit floating-point extension (using INT regs!) CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system? CPU_EXTENSION_RISCV_Zicntr : boolean := true; -- implement base counters? CPU_EXTENSION_RISCV_Zihpm : boolean := false; -- implement hardware performance monitors? CPU_EXTENSION_RISCV_Zifencei : boolean := false; -- implement instruction stream sync.? CPU_EXTENSION_RISCV_Zmmul : boolean := false; -- implement multiply-only M sub-extension? CPU_EXTENSION_RISCV_Zxcfu : boolean := false; -- implement custom (instr.) functions unit? -- Tuning Options -- FAST_MUL_EN : boolean := false; -- use DSPs for M extension's multiplier FAST_SHIFT_EN : boolean := false; -- use barrel shifter for shift operations CPU_CNT_WIDTH : natural := 64; -- total width of CPU cycle and instret counters (0..64) CPU_IPB_ENTRIES : natural := 2; -- entries is instruction prefetch buffer, has to be a power of 2 -- Physical Memory Protection (PMP) -- PMP_NUM_REGIONS : natural := 0; -- number of regions (0..16) PMP_MIN_GRANULARITY : natural := 4; -- minimal region granularity in bytes, has to be a power of 2, min 4 bytes -- Hardware Performance Monitors (HPM) -- HPM_NUM_CNTS : natural := 0; -- number of implemented HPM counters (0..29) HPM_CNT_WIDTH : natural := 40; -- total size of HPM counters (0..64) -- Internal Instruction memory (IMEM) -- MEM_INT_IMEM_EN : boolean := false; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural := 16*1024; -- size of processor-internal instruction memory in bytes -- Internal Data memory (DMEM) -- MEM_INT_DMEM_EN : boolean := false; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural := 8*1024; -- size of processor-internal data memory in bytes -- Internal Instruction Cache (iCACHE) -- ICACHE_EN : boolean := false; -- implement instruction cache ICACHE_NUM_BLOCKS : natural := 4; -- i-cache: number of blocks (min 1), has to be a power of 2 ICACHE_BLOCK_SIZE : natural := 64; -- i-cache: block size in bytes (min 4), has to be a power of 2 ICACHE_ASSOCIATIVITY : natural := 1; -- i-cache: associativity / number of sets (1=direct_mapped), has to be a power of 2 -- External memory interface (WISHBONE) -- MEM_EXT_EN : boolean := false; -- implement external memory bus interface? MEM_EXT_TIMEOUT : natural := 255; -- cycles after a pending bus access auto-terminates (0 = disabled) MEM_EXT_PIPE_MODE : boolean := false; -- protocol: false=classic/standard wishbone mode, true=pipelined wishbone mode MEM_EXT_BIG_ENDIAN : boolean := false; -- byte order: true=big-endian, false=little-endian MEM_EXT_ASYNC_RX : boolean := false; -- use register buffer for RX data when false -- Stream link interface (SLINK) -- SLINK_NUM_TX : natural := 0; -- number of TX links (0..8) SLINK_NUM_RX : natural := 0; -- number of TX links (0..8) SLINK_TX_FIFO : natural := 1; -- TX fifo depth, has to be a power of two SLINK_RX_FIFO : natural := 1; -- RX fifo depth, has to be a power of two -- External Interrupts Controller (XIRQ) -- XIRQ_NUM_CH : natural := 0; -- number of external IRQ channels (0..32) XIRQ_TRIGGER_TYPE : std_ulogic_vector(31 downto 0) := x"FFFFFFFF"; -- trigger type: 0=level, 1=edge XIRQ_TRIGGER_POLARITY : std_ulogic_vector(31 downto 0) := x"FFFFFFFF"; -- trigger polarity: 0=low-level/falling-edge, 1=high-level/rising-edge -- Processor peripherals -- IO_GPIO_EN : boolean := false; -- implement general purpose input/output port unit (GPIO)? IO_MTIME_EN : boolean := false; -- implement machine system timer (MTIME)? IO_UART0_EN : boolean := false; -- implement primary universal asynchronous receiver/transmitter (UART0)? IO_UART0_RX_FIFO : natural := 1; -- RX fifo depth, has to be a power of two, min 1 IO_UART0_TX_FIFO : natural := 1; -- TX fifo depth, has to be a power of two, min 1 IO_UART1_EN : boolean := false; -- implement secondary universal asynchronous receiver/transmitter (UART1)? IO_UART1_RX_FIFO : natural := 1; -- RX fifo depth, has to be a power of two, min 1 IO_UART1_TX_FIFO : natural := 1; -- TX fifo depth, has to be a power of two, min 1 IO_SPI_EN : boolean := false; -- implement serial peripheral interface (SPI)? IO_TWI_EN : boolean := false; -- implement two-wire interface (TWI)? IO_PWM_NUM_CH : natural := 0; -- number of PWM channels to implement (0..60); 0 = disabled IO_WDT_EN : boolean := false; -- implement watch dog timer (WDT)? IO_TRNG_EN : boolean := false; -- implement true random number generator (TRNG)? IO_CFS_EN : boolean := false; -- implement custom functions subsystem (CFS)? IO_CFS_CONFIG : std_ulogic_vector(31 downto 0) := x"00000000"; -- custom CFS configuration generic IO_CFS_IN_SIZE : positive := 32; -- size of CFS input conduit in bits IO_CFS_OUT_SIZE : positive := 32; -- size of CFS output conduit in bits IO_NEOLED_EN : boolean := false; -- implement NeoPixel-compatible smart LED interface (NEOLED)? IO_NEOLED_TX_FIFO : natural := 1; -- NEOLED TX FIFO depth, 1..32k, has to be a power of two IO_GPTMR_EN : boolean := false; -- implement general purpose timer (GPTMR)? IO_XIP_EN : boolean := false -- implement execute in place module (XIP)? ); port ( -- Global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async -- JTAG on-chip debugger interface -- jtag_trst_i : in std_ulogic := 'U'; -- low-active TAP reset (optional) jtag_tck_i : in std_ulogic := 'U'; -- serial clock jtag_tdi_i : in std_ulogic := 'U'; -- serial data input jtag_tdo_o : out std_ulogic; -- serial data output jtag_tms_i : in std_ulogic := 'U'; -- mode select -- Wishbone bus interface (available if MEM_EXT_EN = true) -- wb_tag_o : out std_ulogic_vector(02 downto 0); -- request tag wb_adr_o : out std_ulogic_vector(31 downto 0); -- address wb_dat_i : in std_ulogic_vector(31 downto 0) := (others => 'U'); -- read data wb_dat_o : out std_ulogic_vector(31 downto 0); -- write data wb_we_o : out std_ulogic; -- read/write wb_sel_o : out std_ulogic_vector(03 downto 0); -- byte enable wb_stb_o : out std_ulogic; -- strobe wb_cyc_o : out std_ulogic; -- valid cycle wb_lock_o : out std_ulogic; -- exclusive access request wb_ack_i : in std_ulogic := 'L'; -- transfer acknowledge wb_err_i : in std_ulogic := 'L'; -- transfer error -- Advanced memory control signals (available if MEM_EXT_EN = true) -- fence_o : out std_ulogic; -- indicates an executed FENCE operation fencei_o : out std_ulogic; -- indicates an executed FENCEI operation -- XIP (execute in place via SPI) signals (available if IO_XIP_EN = true) -- xip_csn_o : out std_ulogic; -- chip-select, low-active xip_clk_o : out std_ulogic; -- serial clock xip_sdi_i : in std_ulogic := 'L'; -- device data input xip_sdo_o : out std_ulogic; -- controller data output -- TX stream interfaces (available if SLINK_NUM_TX > 0) -- slink_tx_dat_o : out sdata_8x32_t; -- output data slink_tx_val_o : out std_ulogic_vector(7 downto 0); -- valid output slink_tx_rdy_i : in std_ulogic_vector(7 downto 0) := (others => 'L'); -- ready to send -- RX stream interfaces (available if SLINK_NUM_RX > 0) -- slink_rx_dat_i : in sdata_8x32_t := (others => (others => 'U')); -- input data slink_rx_val_i : in std_ulogic_vector(7 downto 0) := (others => 'L'); -- valid input slink_rx_rdy_o : out std_ulogic_vector(7 downto 0); -- ready to receive -- GPIO (available if IO_GPIO_EN = true) -- gpio_o : out std_ulogic_vector(63 downto 0); -- parallel output gpio_i : in std_ulogic_vector(63 downto 0) := (others => 'U'); -- parallel input -- primary UART0 (available if IO_UART0_EN = true) -- uart0_txd_o : out std_ulogic; -- UART0 send data uart0_rxd_i : in std_ulogic := 'U'; -- UART0 receive data uart0_rts_o : out std_ulogic; -- hw flow control: UART0.RX ready to receive ("RTR"), low-active, optional uart0_cts_i : in std_ulogic := 'L'; -- hw flow control: UART0.TX allowed to transmit, low-active, optional -- secondary UART1 (available if IO_UART1_EN = true) -- uart1_txd_o : out std_ulogic; -- UART1 send data uart1_rxd_i : in std_ulogic := 'U'; -- UART1 receive data uart1_rts_o : out std_ulogic; -- hw flow control: UART1.RX ready to receive ("RTR"), low-active, optional uart1_cts_i : in std_ulogic := 'L'; -- hw flow control: UART1.TX allowed to transmit, low-active, optional -- SPI (available if IO_SPI_EN = true) -- spi_sck_o : out std_ulogic; -- SPI serial clock spi_sdo_o : out std_ulogic; -- controller data out, peripheral data in spi_sdi_i : in std_ulogic := 'U'; -- controller data in, peripheral data out spi_csn_o : out std_ulogic_vector(07 downto 0); -- SPI CS -- TWI (available if IO_TWI_EN = true) -- twi_sda_io : inout std_logic; -- twi serial data line twi_scl_io : inout std_logic; -- twi serial clock line -- PWM (available if IO_PWM_NUM_CH > 0) -- pwm_o : out std_ulogic_vector(59 downto 0); -- pwm channels -- Custom Functions Subsystem IO -- cfs_in_i : in std_ulogic_vector(IO_CFS_IN_SIZE-1 downto 0) := (others => 'U'); -- custom CFS inputs conduit cfs_out_o : out std_ulogic_vector(IO_CFS_OUT_SIZE-1 downto 0); -- custom CFS outputs conduit -- NeoPixel-compatible smart LED interface (available if IO_NEOLED_EN = true) -- neoled_o : out std_ulogic; -- async serial data line -- System time -- mtime_i : in std_ulogic_vector(63 downto 0) := (others => 'U'); -- current system time from ext. MTIME (if IO_MTIME_EN = false) mtime_o : out std_ulogic_vector(63 downto 0); -- current system time from int. MTIME (if IO_MTIME_EN = true) -- External platform interrupts (available if XIRQ_NUM_CH > 0) -- xirq_i : in std_ulogic_vector(31 downto 0) := (others => 'L'); -- IRQ channels -- CPU Interrupts -- mtime_irq_i : in std_ulogic := 'L'; -- machine timer interrupt, available if IO_MTIME_EN = false msw_irq_i : in std_ulogic := 'L'; -- machine software interrupt mext_irq_i : in std_ulogic := 'L' -- machine external interrupt ); end component; -- Component: CPU Top Entity -------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu generic ( -- General -- HW_THREAD_ID : natural; -- hardware thread id (32-bit) CPU_BOOT_ADDR : std_ulogic_vector(31 downto 0); -- cpu boot address CPU_DEBUG_ADDR : std_ulogic_vector(31 downto 0); -- cpu debug mode start address -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_A : boolean; -- implement atomic extension? CPU_EXTENSION_RISCV_B : boolean; -- implement bit-manipulation extension? CPU_EXTENSION_RISCV_C : boolean; -- implement compressed extension? CPU_EXTENSION_RISCV_E : boolean; -- implement embedded RF extension? CPU_EXTENSION_RISCV_M : boolean; -- implement mul/div extension? CPU_EXTENSION_RISCV_U : boolean; -- implement user mode extension? CPU_EXTENSION_RISCV_Zfinx : boolean; -- implement 32-bit floating-point extension (using INT reg!) CPU_EXTENSION_RISCV_Zicsr : boolean; -- implement CSR system? CPU_EXTENSION_RISCV_Zicntr : boolean; -- implement base counters? CPU_EXTENSION_RISCV_Zihpm : boolean; -- implement hardware performance monitors? CPU_EXTENSION_RISCV_Zifencei : boolean; -- implement instruction stream sync.? CPU_EXTENSION_RISCV_Zmmul : boolean; -- implement multiply-only M sub-extension? CPU_EXTENSION_RISCV_Zxcfu : boolean; -- implement custom (instr.) functions unit? CPU_EXTENSION_RISCV_DEBUG : boolean; -- implement CPU debug mode? -- Tuning Options -- FAST_MUL_EN : boolean; -- use DSPs for M extension's multiplier FAST_SHIFT_EN : boolean; -- use barrel shifter for shift operations CPU_CNT_WIDTH : natural; -- total width of CPU cycle and instret counters (0..64) CPU_IPB_ENTRIES : natural; -- entries is instruction prefetch buffer, has to be a power of 2 -- Physical Memory Protection (PMP) -- PMP_NUM_REGIONS : natural; -- number of regions (0..16) PMP_MIN_GRANULARITY : natural; -- minimal region granularity in bytes, has to be a power of 2, min 4 bytes -- Hardware Performance Monitors (HPM) -- HPM_NUM_CNTS : natural; -- number of implemented HPM counters (0..29) HPM_CNT_WIDTH : natural -- total size of HPM counters (0..64) ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async sleep_o : out std_ulogic; -- cpu is in sleep mode when set debug_o : out std_ulogic; -- cpu is in debug mode when set -- instruction bus interface -- i_bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address i_bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data i_bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data i_bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable i_bus_we_o : out std_ulogic; -- write enable i_bus_re_o : out std_ulogic; -- read enable i_bus_lock_o : out std_ulogic; -- exclusive access request i_bus_ack_i : in std_ulogic; -- bus transfer acknowledge i_bus_err_i : in std_ulogic; -- bus transfer error i_bus_fence_o : out std_ulogic; -- executed FENCEI operation i_bus_priv_o : out std_ulogic; -- privilege level -- data bus interface -- d_bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address d_bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data d_bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data d_bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable d_bus_we_o : out std_ulogic; -- write enable d_bus_re_o : out std_ulogic; -- read enable d_bus_lock_o : out std_ulogic; -- exclusive access request d_bus_ack_i : in std_ulogic; -- bus transfer acknowledge d_bus_err_i : in std_ulogic; -- bus transfer error d_bus_fence_o : out std_ulogic; -- executed FENCE operation d_bus_priv_o : out std_ulogic; -- privilege level -- system time input from MTIME -- time_i : in std_ulogic_vector(63 downto 0); -- current system time -- interrupts (risc-v compliant) -- msw_irq_i : in std_ulogic; -- machine software interrupt mext_irq_i : in std_ulogic; -- machine external interrupt mtime_irq_i : in std_ulogic; -- machine timer interrupt -- fast interrupts (custom) -- firq_i : in std_ulogic_vector(15 downto 0); -- debug mode (halt) request -- db_halt_req_i : in std_ulogic ); end component; -- Component: CPU Control ----------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_control generic ( -- General -- HW_THREAD_ID : natural; -- hardware thread id (32-bit) CPU_BOOT_ADDR : std_ulogic_vector(31 downto 0); -- cpu boot address CPU_DEBUG_ADDR : std_ulogic_vector(31 downto 0); -- cpu debug mode start address -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_A : boolean; -- implement atomic extension? CPU_EXTENSION_RISCV_B : boolean; -- implement bit-manipulation extension? CPU_EXTENSION_RISCV_C : boolean; -- implement compressed extension? CPU_EXTENSION_RISCV_E : boolean; -- implement embedded RF extension? CPU_EXTENSION_RISCV_M : boolean; -- implement mul/div extension? CPU_EXTENSION_RISCV_U : boolean; -- implement user mode extension? CPU_EXTENSION_RISCV_Zfinx : boolean; -- implement 32-bit floating-point extension (using INT reg!) CPU_EXTENSION_RISCV_Zicsr : boolean; -- implement CSR system? CPU_EXTENSION_RISCV_Zicntr : boolean; -- implement base counters? CPU_EXTENSION_RISCV_Zihpm : boolean; -- implement hardware performance monitors? CPU_EXTENSION_RISCV_Zifencei : boolean; -- implement instruction stream sync.? CPU_EXTENSION_RISCV_Zmmul : boolean; -- implement multiply-only M sub-extension? CPU_EXTENSION_RISCV_Zxcfu : boolean; -- implement custom (instr.) functions unit? CPU_EXTENSION_RISCV_DEBUG : boolean; -- implement CPU debug mode? -- Extension Options -- FAST_MUL_EN : boolean; -- use DSPs for M extension's multiplier FAST_SHIFT_EN : boolean; -- use barrel shifter for shift operations CPU_CNT_WIDTH : natural; -- total width of CPU cycle and instret counters (0..64) CPU_IPB_ENTRIES : natural; -- entries is instruction prefetch buffer, has to be a power of 2 -- Physical memory protection (PMP) -- PMP_NUM_REGIONS : natural; -- number of regions (0..16) PMP_MIN_GRANULARITY : natural; -- minimal region granularity in bytes, has to be a power of 2, min 4 bytes -- Hardware Performance Monitors (HPM) -- HPM_NUM_CNTS : natural; -- number of implemented HPM counters (0..29) HPM_CNT_WIDTH : natural -- total size of HPM counters (0..64) ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_o : out std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- status input -- alu_idone_i : in std_ulogic; -- ALU iterative operation done bus_i_wait_i : in std_ulogic; -- wait for bus bus_d_wait_i : in std_ulogic; -- wait for bus excl_state_i : in std_ulogic; -- atomic/exclusive access lock status -- data input -- instr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- instruction cmp_i : in std_ulogic_vector(1 downto 0); -- comparator status alu_add_i : in std_ulogic_vector(data_width_c-1 downto 0); -- ALU address result rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 -- data output -- imm_o : out std_ulogic_vector(data_width_c-1 downto 0); -- immediate fetch_pc_o : out std_ulogic_vector(data_width_c-1 downto 0); -- PC for instruction fetch curr_pc_o : out std_ulogic_vector(data_width_c-1 downto 0); -- current PC (corresponding to current instruction) next_pc_o : out std_ulogic_vector(data_width_c-1 downto 0); -- next PC (corresponding to next instruction) csr_rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- CSR read data -- FPU interface -- fpu_flags_i : in std_ulogic_vector(04 downto 0); -- exception flags -- debug mode (halt) request -- db_halt_req_i : in std_ulogic; -- interrupts (risc-v compliant) -- msw_irq_i : in std_ulogic; -- machine software interrupt mext_irq_i : in std_ulogic; -- machine external interrupt mtime_irq_i : in std_ulogic; -- machine timer interrupt -- fast interrupts (custom) -- firq_i : in std_ulogic_vector(15 downto 0); -- system time input from MTIME -- time_i : in std_ulogic_vector(63 downto 0); -- current system time -- physical memory protection -- pmp_addr_o : out pmp_addr_if_t; -- addresses pmp_ctrl_o : out pmp_ctrl_if_t; -- configs -- bus access exceptions -- mar_i : in std_ulogic_vector(data_width_c-1 downto 0); -- memory address register ma_instr_i : in std_ulogic; -- misaligned instruction address ma_load_i : in std_ulogic; -- misaligned load data address ma_store_i : in std_ulogic; -- misaligned store data address be_instr_i : in std_ulogic; -- bus error on instruction access be_load_i : in std_ulogic; -- bus error on load data access be_store_i : in std_ulogic -- bus error on store data access ); end component; -- Component: CPU Register File ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_regfile generic ( CPU_EXTENSION_RISCV_E : boolean -- implement embedded RF extension? ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- data input -- alu_i : in std_ulogic_vector(data_width_c-1 downto 0); -- ALU result mem_i : in std_ulogic_vector(data_width_c-1 downto 0); -- memory read data csr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- CSR read data pc2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- next PC -- data output -- rs1_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operand 1 rs2_o : out std_ulogic_vector(data_width_c-1 downto 0) -- operand 2 ); end component; -- Component: CPU ALU --------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_alu generic ( -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_B : boolean; -- implement bit-manipulation extension? CPU_EXTENSION_RISCV_M : boolean; -- implement mul/div extension? CPU_EXTENSION_RISCV_Zmmul : boolean; -- implement multiply-only M sub-extension? CPU_EXTENSION_RISCV_Zfinx : boolean; -- implement 32-bit floating-point extension (using INT reg!) CPU_EXTENSION_RISCV_Zxcfu : boolean; -- implement custom (instr.) functions unit? -- Extension Options -- FAST_MUL_EN : boolean; -- use DSPs for M extension's multiplier FAST_SHIFT_EN : boolean -- use barrel shifter for shift operations ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- data input -- rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 pc_i : in std_ulogic_vector(data_width_c-1 downto 0); -- current PC imm_i : in std_ulogic_vector(data_width_c-1 downto 0); -- immediate -- data output -- cmp_o : out std_ulogic_vector(1 downto 0); -- comparator status res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- ALU result add_o : out std_ulogic_vector(data_width_c-1 downto 0); -- address computation result fpu_flags_o : out std_ulogic_vector(4 downto 0); -- FPU exception flags -- status -- idone_o : out std_ulogic -- iterative processing units done? ); end component; -- Component: CPU Co-Processor SHIFTER ---------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_cp_shifter generic ( FAST_SHIFT_EN : boolean -- use barrel shifter for shift operations ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus start_i : in std_ulogic; -- trigger operation -- data input -- rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 shamt_i : in std_ulogic_vector(index_size_f(data_width_c)-1 downto 0); -- shift amount -- result and status -- res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operation result valid_o : out std_ulogic -- data output valid ); end component; -- Component: CPU Co-Processor MULDIV ('M' extension) ------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_cp_muldiv generic ( FAST_MUL_EN : boolean; -- use DSPs for faster multiplication DIVISION_EN : boolean -- implement divider hardware ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus start_i : in std_ulogic; -- trigger operation -- data input -- rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 -- result and status -- res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operation result valid_o : out std_ulogic -- data output valid ); end component; -- Component: CPU Co-Processor Bit-Manipulation Unit ('B' extension) ---------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_cp_bitmanip is generic ( FAST_SHIFT_EN : boolean -- use barrel shifter for shift operations ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus start_i : in std_ulogic; -- trigger operation -- data input -- cmp_i : in std_ulogic_vector(1 downto 0); -- comparator status rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 shamt_i : in std_ulogic_vector(index_size_f(data_width_c)-1 downto 0); -- shift amount -- result and status -- res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operation result valid_o : out std_ulogic -- data output valid ); end component; -- Component: CPU Co-Processor 32-bit FPU ('Zfinx' extension) ----------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_cp_fpu port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus start_i : in std_ulogic; -- trigger operation -- data input -- cmp_i : in std_ulogic_vector(1 downto 0); -- comparator status rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 -- result and status -- res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operation result fflags_o : out std_ulogic_vector(4 downto 0); -- exception flags valid_o : out std_ulogic -- data output valid ); end component; -- Component: CPU Co-Processor Custom (Instr.) Functions Unit ('Zxcfu' extension) --------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_cp_cfu port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus start_i : in std_ulogic; -- trigger operation -- data input -- rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 -- result and status -- res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operation result valid_o : out std_ulogic -- data output valid ); end component; -- Component: CPU Bus Interface ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_bus generic ( CPU_EXTENSION_RISCV_A : boolean; -- implement atomic extension? CPU_EXTENSION_RISCV_C : boolean; -- implement compressed extension? -- Physical memory protection (PMP) -- PMP_NUM_REGIONS : natural; -- number of regions (0..16) PMP_MIN_GRANULARITY : natural -- minimal region granularity in bytes, has to be a power of 2, min 4 bytes ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic := '0'; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- cpu instruction fetch interface -- fetch_pc_i : in std_ulogic_vector(data_width_c-1 downto 0); -- PC for instruction fetch instr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- instruction i_wait_o : out std_ulogic; -- wait for fetch to complete -- ma_instr_o : out std_ulogic; -- misaligned instruction address be_instr_o : out std_ulogic; -- bus error on instruction access -- cpu data access interface -- addr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- ALU result -> access address wdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- write data rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- read data mar_o : out std_ulogic_vector(data_width_c-1 downto 0); -- current memory address register d_wait_o : out std_ulogic; -- wait for access to complete -- excl_state_o : out std_ulogic; -- atomic/exclusive access status ma_load_o : out std_ulogic; -- misaligned load data address ma_store_o : out std_ulogic; -- misaligned store data address be_load_o : out std_ulogic; -- bus error on load data access be_store_o : out std_ulogic; -- bus error on store data access -- physical memory protection -- pmp_addr_i : in pmp_addr_if_t; -- addresses pmp_ctrl_i : in pmp_ctrl_if_t; -- configs -- instruction bus -- i_bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address i_bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data i_bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data i_bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable i_bus_we_o : out std_ulogic; -- write enable i_bus_re_o : out std_ulogic; -- read enable i_bus_lock_o : out std_ulogic; -- exclusive access request i_bus_ack_i : in std_ulogic; -- bus transfer acknowledge i_bus_err_i : in std_ulogic; -- bus transfer error i_bus_fence_o : out std_ulogic; -- fence operation -- data bus -- d_bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address d_bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data d_bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data d_bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable d_bus_we_o : out std_ulogic; -- write enable d_bus_re_o : out std_ulogic; -- read enable d_bus_lock_o : out std_ulogic; -- exclusive access request d_bus_ack_i : in std_ulogic; -- bus transfer acknowledge d_bus_err_i : in std_ulogic; -- bus transfer error d_bus_fence_o : out std_ulogic -- fence operation ); end component; -- Component: Bus Keeper ------------------------------------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_bus_keeper is port ( -- host access -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset, low-active, async addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic; -- transfer error -- bus monitoring -- bus_addr_i : in std_ulogic_vector(31 downto 0); -- address bus_rden_i : in std_ulogic; -- read enable bus_wren_i : in std_ulogic; -- write enable bus_ack_i : in std_ulogic; -- transfer acknowledge from bus system bus_err_i : in std_ulogic; -- transfer error from bus system bus_tmo_i : in std_ulogic; -- transfer timeout (external interface) bus_ext_i : in std_ulogic; -- external bus access bus_xip_i : in std_ulogic -- pending XIP access ); end component; -- Component: CPU Instruction Cache ------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_icache generic ( ICACHE_NUM_BLOCKS : natural; -- number of blocks (min 1), has to be a power of 2 ICACHE_BLOCK_SIZE : natural; -- block size in bytes (min 4), has to be a power of 2 ICACHE_NUM_SETS : natural -- associativity / number of sets (1=direct_mapped), has to be a power of 2 ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async clear_i : in std_ulogic; -- cache clear miss_o : out std_ulogic; -- cache miss -- host controller interface -- host_addr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus access address host_rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus read data host_wdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus write data host_ben_i : in std_ulogic_vector(03 downto 0); -- byte enable host_we_i : in std_ulogic; -- write enable host_re_i : in std_ulogic; -- read enable host_ack_o : out std_ulogic; -- bus transfer acknowledge host_err_o : out std_ulogic; -- bus transfer error -- peripheral bus interface -- bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable bus_we_o : out std_ulogic; -- write enable bus_re_o : out std_ulogic; -- read enable bus_ack_i : in std_ulogic; -- bus transfer acknowledge bus_err_i : in std_ulogic -- bus transfer error ); end component; -- Component: CPU Bus Switch -------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_busswitch generic ( PORT_CA_READ_ONLY : boolean; -- set if controller port A is read-only PORT_CB_READ_ONLY : boolean -- set if controller port B is read-only ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async -- controller interface a -- ca_bus_addr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus access address ca_bus_rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus read data ca_bus_wdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus write data ca_bus_ben_i : in std_ulogic_vector(03 downto 0); -- byte enable ca_bus_we_i : in std_ulogic; -- write enable ca_bus_re_i : in std_ulogic; -- read enable ca_bus_lock_i : in std_ulogic; -- exclusive access request ca_bus_ack_o : out std_ulogic; -- bus transfer acknowledge ca_bus_err_o : out std_ulogic; -- bus transfer error -- controller interface b -- cb_bus_addr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus access address cb_bus_rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus read data cb_bus_wdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus write data cb_bus_ben_i : in std_ulogic_vector(03 downto 0); -- byte enable cb_bus_we_i : in std_ulogic; -- write enable cb_bus_re_i : in std_ulogic; -- read enable cb_bus_lock_i : in std_ulogic; -- exclusive access request cb_bus_ack_o : out std_ulogic; -- bus transfer acknowledge cb_bus_err_o : out std_ulogic; -- bus transfer error -- peripheral bus -- p_bus_src_o : out std_ulogic; -- access source: 0 = A, 1 = B p_bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address p_bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data p_bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data p_bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable p_bus_we_o : out std_ulogic; -- write enable p_bus_re_o : out std_ulogic; -- read enable p_bus_lock_o : out std_ulogic; -- exclusive access request p_bus_ack_i : in std_ulogic; -- bus transfer acknowledge p_bus_err_i : in std_ulogic -- bus transfer error ); end component; -- Component: CPU Compressed Instructions De-Compressor ----------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_decompressor generic ( FPU_ENABLE : boolean -- floating-point instruction enabled ); port ( -- instruction input -- ci_instr16_i : in std_ulogic_vector(15 downto 0); -- compressed instruction input -- instruction output -- ci_illegal_o : out std_ulogic; -- is an illegal compressed instruction ci_instr32_o : out std_ulogic_vector(31 downto 0) -- 32-bit decompressed instruction ); end component; -- Component: Processor-internal instruction memory (IMEM) -------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_imem generic ( IMEM_BASE : std_ulogic_vector(31 downto 0); -- memory base address IMEM_SIZE : natural; -- processor-internal instruction memory size in bytes IMEM_AS_IROM : boolean -- implement IMEM as pre-initialized read-only memory? ); port ( clk_i : in std_ulogic; -- global clock line rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic -- transfer error ); end component; -- Component: Processor-internal data memory (DMEM) --------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_dmem generic ( DMEM_BASE : std_ulogic_vector(31 downto 0); -- memory base address DMEM_SIZE : natural -- processor-internal instruction memory size in bytes ); port ( clk_i : in std_ulogic; -- global clock line rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; -- Component: Processor-internal bootloader ROM (BOOTROM) --------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_boot_rom generic ( BOOTROM_BASE : std_ulogic_vector(31 downto 0) -- boot ROM base address ); port ( clk_i : in std_ulogic; -- global clock line rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic -- transfer error ); end component; -- Component: Machine System Timer (mtime) ------------------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_mtime port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- time output for CPU -- time_o : out std_ulogic_vector(63 downto 0); -- current system time -- interrupt -- irq_o : out std_ulogic -- interrupt request ); end component; -- Component: General Purpose Input/Output Port (GPIO) ------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_gpio port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic; -- transfer error -- parallel io -- gpio_o : out std_ulogic_vector(63 downto 0); gpio_i : in std_ulogic_vector(63 downto 0) ); end component; -- Component: Watchdog Timer (WDT) -------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_wdt generic ( DEBUG_EN : boolean -- CPU debug mode implemented? ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- CPU in debug mode? -- cpu_debug_i : in std_ulogic; -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- timeout event -- irq_o : out std_ulogic; -- timeout IRQ rstn_o : out std_ulogic -- timeout reset, low_active, use it as async! ); end component; -- Component: Universal Asynchronous Receiver and Transmitter (UART) ---------------------- -- ------------------------------------------------------------------------------------------- component neorv32_uart generic ( UART_PRIMARY : boolean; -- true = primary UART (UART0), false = secondary UART (UART1) UART_RX_FIFO : natural; -- RX fifo depth, has to be a power of two, min 1 UART_TX_FIFO : natural -- TX fifo depth, has to be a power of two, min 1 ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- com lines -- uart_txd_o : out std_ulogic; uart_rxd_i : in std_ulogic; -- hardware flow control -- uart_rts_o : out std_ulogic; -- UART.RX ready to receive ("RTR"), low-active, optional uart_cts_i : in std_ulogic; -- UART.TX allowed to transmit, low-active, optional -- interrupts -- irq_rxd_o : out std_ulogic; -- uart data received interrupt irq_txd_o : out std_ulogic -- uart transmission done interrupt ); end component; -- Component: Serial Peripheral Interface (SPI) ------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_spi port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- com lines -- spi_sck_o : out std_ulogic; -- SPI serial clock spi_sdo_o : out std_ulogic; -- controller data out, peripheral data in spi_sdi_i : in std_ulogic; -- controller data in, peripheral data out spi_csn_o : out std_ulogic_vector(07 downto 0); -- SPI CS -- interrupt -- irq_o : out std_ulogic -- transmission done interrupt ); end component; -- Component: Two-Wire Interface (TWI) ---------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_twi port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- com lines -- twi_sda_io : inout std_logic; -- serial data line twi_scl_io : inout std_logic; -- serial clock line -- interrupt -- irq_o : out std_ulogic -- transfer done IRQ ); end component; -- Component: Pulse-Width Modulation Controller (PWM) ------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_pwm generic ( NUM_CHANNELS : natural -- number of PWM channels (0..60) ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- pwm output channels -- pwm_o : out std_ulogic_vector(59 downto 0) ); end component; -- Component: True Random Number Generator (TRNG) ----------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_trng port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; -- Component: Wishbone Bus Gateway (WISHBONE) --------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_wishbone generic ( -- Internal instruction memory -- MEM_INT_IMEM_EN : boolean; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural; -- size of processor-internal instruction memory in bytes -- Internal data memory -- MEM_INT_DMEM_EN : boolean; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural; -- size of processor-internal data memory in bytes -- Interface Configuration -- BUS_TIMEOUT : natural; -- cycles after an UNACKNOWLEDGED bus access triggers a bus fault exception PIPE_MODE : boolean; -- protocol: false=classic/standard wishbone mode, true=pipelined wishbone mode BIG_ENDIAN : boolean; -- byte order: true=big-endian, false=little-endian ASYNC_RX : boolean -- use register buffer for RX data when false ); port ( -- global control -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active -- host access -- src_i : in std_ulogic; -- access type (0: data, 1:instruction) addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out lock_i : in std_ulogic; -- exclusive access request ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic; -- transfer error tmo_o : out std_ulogic; -- transfer timeout priv_i : in std_ulogic; -- current CPU privilege level ext_o : out std_ulogic; -- active external access -- xip configuration -- xip_en_i : in std_ulogic; -- XIP module enabled xip_page_i : in std_ulogic_vector(03 downto 0); -- XIP memory page -- wishbone interface -- wb_tag_o : out std_ulogic_vector(02 downto 0); -- request tag wb_adr_o : out std_ulogic_vector(31 downto 0); -- address wb_dat_i : in std_ulogic_vector(31 downto 0); -- read data wb_dat_o : out std_ulogic_vector(31 downto 0); -- write data wb_we_o : out std_ulogic; -- read/write wb_sel_o : out std_ulogic_vector(03 downto 0); -- byte enable wb_stb_o : out std_ulogic; -- strobe wb_cyc_o : out std_ulogic; -- valid cycle wb_lock_o : out std_ulogic; -- exclusive access request wb_ack_i : in std_ulogic; -- transfer acknowledge wb_err_i : in std_ulogic -- transfer error ); end component; -- Component: Custom Functions Subsystem (CFS) -------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cfs generic ( CFS_CONFIG : std_ulogic_vector(31 downto 0); -- custom CFS configuration generic CFS_IN_SIZE : positive; -- size of CFS input conduit in bits CFS_OUT_SIZE : positive -- size of CFS output conduit in bits ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active, use as async addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- word write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic; -- transfer error -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- "clock" inputs -- interrupt -- irq_o : out std_ulogic; -- interrupt request -- custom io (conduit) -- cfs_in_i : in std_ulogic_vector(CFS_IN_SIZE-1 downto 0); -- custom inputs cfs_out_o : out std_ulogic_vector(CFS_OUT_SIZE-1 downto 0) -- custom outputs ); end component; -- Component: Smart LED (WS2811/WS2812) Interface (NEOLED) -------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_neoled generic ( FIFO_DEPTH : natural -- TX FIFO depth (1..32k, power of two) ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- interrupt -- irq_o : out std_ulogic; -- interrupt request -- NEOLED output -- neoled_o : out std_ulogic -- serial async data line ); end component; -- Component: Stream Link Interface (SLINK) ----------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_slink generic ( SLINK_NUM_TX : natural; -- number of TX links (0..8) SLINK_NUM_RX : natural; -- number of TX links (0..8) SLINK_TX_FIFO : natural; -- TX fifo depth, has to be a power of two SLINK_RX_FIFO : natural -- RX fifo depth, has to be a power of two ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- interrupt -- irq_tx_o : out std_ulogic; -- transmission done irq_rx_o : out std_ulogic; -- data received -- TX stream interfaces -- slink_tx_dat_o : out sdata_8x32_t; -- output data slink_tx_val_o : out std_ulogic_vector(7 downto 0); -- valid output slink_tx_rdy_i : in std_ulogic_vector(7 downto 0); -- ready to send -- RX stream interfaces -- slink_rx_dat_i : in sdata_8x32_t; -- input data slink_rx_val_i : in std_ulogic_vector(7 downto 0); -- valid input slink_rx_rdy_o : out std_ulogic_vector(7 downto 0) -- ready to receive ); end component; -- Component: External Interrupt Controller (XIRQ) ---------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_xirq generic ( XIRQ_NUM_CH : natural; -- number of external IRQ channels (0..32) XIRQ_TRIGGER_TYPE : std_ulogic_vector(31 downto 0); -- trigger type: 0=level, 1=edge XIRQ_TRIGGER_POLARITY : std_ulogic_vector(31 downto 0) -- trigger polarity: 0=low-level/falling-edge, 1=high-level/rising-edge ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- external interrupt lines -- xirq_i : in std_ulogic_vector(31 downto 0); -- CPU interrupt -- cpu_irq_o : out std_ulogic ); end component; -- Component: General Purpose Timer (GPTMR) ----------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_gptmr port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- interrupt -- irq_o : out std_ulogic -- transmission done interrupt ); end component; -- Component: Execute In Place Module (XIP) ----------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_xip port ( -- globals -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active -- host access: control register access port -- ct_addr_i : in std_ulogic_vector(31 downto 0); -- address ct_rden_i : in std_ulogic; -- read enable ct_wren_i : in std_ulogic; -- write enable ct_data_i : in std_ulogic_vector(31 downto 0); -- data in ct_data_o : out std_ulogic_vector(31 downto 0); -- data out ct_ack_o : out std_ulogic; -- transfer acknowledge -- host access: instruction fetch access port (read-only) -- if_addr_i : in std_ulogic_vector(31 downto 0); -- address if_rden_i : in std_ulogic; -- read enable if_data_o : out std_ulogic_vector(31 downto 0); -- data out if_ack_o : out std_ulogic; -- transfer acknowledge -- status -- xip_en_o : out std_ulogic; -- XIP enable xip_acc_o : out std_ulogic; -- pending XIP access xip_page_o : out std_ulogic_vector(03 downto 0); -- XIP page -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- SPI device interface -- spi_csn_o : out std_ulogic; -- chip-select, low-active spi_clk_o : out std_ulogic; -- serial clock spi_data_i : in std_ulogic; -- device data output spi_data_o : out std_ulogic -- controller data output ); end component; -- Component: System Configuration Information Memory (SYSINFO) --------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_sysinfo generic ( -- General -- CLOCK_FREQUENCY : natural; -- clock frequency of clk_i in Hz INT_BOOTLOADER_EN : boolean; -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM -- Physical memory protection (PMP) -- PMP_NUM_REGIONS : natural; -- number of regions (0..16) -- Internal Instruction memory -- MEM_INT_IMEM_EN : boolean; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural; -- size of processor-internal instruction memory in bytes -- Internal Data memory -- MEM_INT_DMEM_EN : boolean; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural; -- size of processor-internal data memory in bytes -- Internal Cache memory -- ICACHE_EN : boolean; -- implement instruction cache ICACHE_NUM_BLOCKS : natural; -- i-cache: number of blocks (min 2), has to be a power of 2 ICACHE_BLOCK_SIZE : natural; -- i-cache: block size in bytes (min 4), has to be a power of 2 ICACHE_ASSOCIATIVITY : natural; -- i-cache: associativity (min 1), has to be a power 2 -- External memory interface -- MEM_EXT_EN : boolean; -- implement external memory bus interface? MEM_EXT_BIG_ENDIAN : boolean; -- byte order: true=big-endian, false=little-endian -- On-Chip Debugger -- ON_CHIP_DEBUGGER_EN : boolean; -- implement OCD? -- Processor peripherals -- IO_GPIO_EN : boolean; -- implement general purpose input/output port unit (GPIO)? IO_MTIME_EN : boolean; -- implement machine system timer (MTIME)? IO_UART0_EN : boolean; -- implement primary universal asynchronous receiver/transmitter (UART0)? IO_UART1_EN : boolean; -- implement secondary universal asynchronous receiver/transmitter (UART1)? IO_SPI_EN : boolean; -- implement serial peripheral interface (SPI)? IO_TWI_EN : boolean; -- implement two-wire interface (TWI)? IO_PWM_NUM_CH : natural; -- number of PWM channels to implement IO_WDT_EN : boolean; -- implement watch dog timer (WDT)? IO_TRNG_EN : boolean; -- implement true random number generator (TRNG)? IO_CFS_EN : boolean; -- implement custom functions subsystem (CFS)? IO_SLINK_EN : boolean; -- implement stream link interface? IO_NEOLED_EN : boolean; -- implement NeoPixel-compatible smart LED interface (NEOLED)? IO_XIRQ_NUM_CH : natural; -- number of external interrupt (XIRQ) channels to implement IO_GPTMR_EN : boolean; -- implement general purpose timer (GPTMR)? IO_XIP_EN : boolean -- implement execute in place module (XIP)? ); port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic -- transfer error ); end component; -- Component: General Purpose FIFO -------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_fifo generic ( FIFO_DEPTH : natural; -- number of fifo entries; has to be a power of two; min 1 FIFO_WIDTH : natural; -- size of data elements in fifo FIFO_RSYNC : boolean; -- false = async read; true = sync read FIFO_SAFE : boolean -- true = allow read/write only if entry available ); port ( -- control -- clk_i : in std_ulogic; -- clock, rising edge rstn_i : in std_ulogic; -- async reset, low-active clear_i : in std_ulogic; -- sync reset, high-active level_o : out std_ulogic_vector(index_size_f(FIFO_DEPTH) downto 0); -- fill level half_o : out std_ulogic; -- FIFO is at least half full -- write port -- wdata_i : in std_ulogic_vector(FIFO_WIDTH-1 downto 0); -- write data we_i : in std_ulogic; -- write enable free_o : out std_ulogic; -- at least one entry is free when set -- read port -- re_i : in std_ulogic; -- read enable rdata_o : out std_ulogic_vector(FIFO_WIDTH-1 downto 0); -- read data avail_o : out std_ulogic -- data available when set ); end component; -- Component: On-Chip Debugger - Debug Module (DM) ---------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_debug_dm port ( -- global control -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active -- debug module interface (DMI) -- dmi_rstn_i : in std_ulogic; dmi_req_valid_i : in std_ulogic; dmi_req_ready_o : out std_ulogic; -- DMI is allowed to make new requests when set dmi_req_addr_i : in std_ulogic_vector(06 downto 0); dmi_req_op_i : in std_ulogic; -- 0=read, 1=write dmi_req_data_i : in std_ulogic_vector(31 downto 0); dmi_resp_valid_o : out std_ulogic; -- response valid when set dmi_resp_ready_i : in std_ulogic; -- ready to receive respond dmi_resp_data_o : out std_ulogic_vector(31 downto 0); dmi_resp_err_o : out std_ulogic; -- 0=ok, 1=error -- CPU bus access -- cpu_debug_i : in std_ulogic; -- CPU is in debug mode cpu_addr_i : in std_ulogic_vector(31 downto 0); -- address cpu_rden_i : in std_ulogic; -- read enable cpu_wren_i : in std_ulogic; -- write enable cpu_data_i : in std_ulogic_vector(31 downto 0); -- data in cpu_data_o : out std_ulogic_vector(31 downto 0); -- data out cpu_ack_o : out std_ulogic; -- transfer acknowledge -- CPU control -- cpu_ndmrstn_o : out std_ulogic; -- soc reset cpu_halt_req_o : out std_ulogic -- request hart to halt (enter debug mode) ); end component; -- Component: On-Chip Debugger - Debug Transport Module (DTM) ----------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_debug_dtm generic ( IDCODE_VERSION : std_ulogic_vector(03 downto 0); -- version IDCODE_PARTID : std_ulogic_vector(15 downto 0); -- part number IDCODE_MANID : std_ulogic_vector(10 downto 0) -- manufacturer id ); port ( -- global control -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active -- jtag connection -- jtag_trst_i : in std_ulogic; jtag_tck_i : in std_ulogic; jtag_tdi_i : in std_ulogic; jtag_tdo_o : out std_ulogic; jtag_tms_i : in std_ulogic; -- debug module interface (DMI) -- dmi_rstn_o : out std_ulogic; dmi_req_valid_o : out std_ulogic; dmi_req_ready_i : in std_ulogic; -- DMI is allowed to make new requests when set dmi_req_addr_o : out std_ulogic_vector(06 downto 0); dmi_req_op_o : out std_ulogic; -- 0=read, 1=write dmi_req_data_o : out std_ulogic_vector(31 downto 0); dmi_resp_valid_i : in std_ulogic; -- response valid when set dmi_resp_ready_o : out std_ulogic; -- ready to receive respond dmi_resp_data_i : in std_ulogic_vector(31 downto 0); dmi_resp_err_i : in std_ulogic -- 0=ok, 1=error ); end component; end neorv32_package; package body neorv32_package is -- Function: Minimal required number of bits to represent <input> numbers ----------------- -- ------------------------------------------------------------------------------------------- function index_size_f(input : natural) return natural is begin for i in 0 to natural'high loop if (2**i >= input) then return i; end if; end loop; -- i return 0; end function index_size_f; -- Function: Conditional select natural --------------------------------------------------- -- ------------------------------------------------------------------------------------------- function cond_sel_natural_f(cond : boolean; val_t : natural; val_f : natural) return natural is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_natural_f; -- Function: Conditional select integer --------------------------------------------------- -- ------------------------------------------------------------------------------------------- function cond_sel_int_f(cond : boolean; val_t : integer; val_f : integer) return integer is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_int_f; -- Function: Conditional select std_ulogic_vector ----------------------------------------- -- ------------------------------------------------------------------------------------------- function cond_sel_stdulogicvector_f(cond : boolean; val_t : std_ulogic_vector; val_f : std_ulogic_vector) return std_ulogic_vector is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_stdulogicvector_f; -- Function: Conditional select std_ulogic ------------------------------------------------ -- ------------------------------------------------------------------------------------------- function cond_sel_stdulogic_f(cond : boolean; val_t : std_ulogic; val_f : std_ulogic) return std_ulogic is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_stdulogic_f; -- Function: Conditional select string ---------------------------------------------------- -- ------------------------------------------------------------------------------------------- function cond_sel_string_f(cond : boolean; val_t : string; val_f : string) return string is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_string_f; -- Function: Convert bool to std_ulogic --------------------------------------------------- -- ------------------------------------------------------------------------------------------- function bool_to_ulogic_f(cond : boolean) return std_ulogic is begin if (cond = true) then return '1'; else return '0'; end if; end function bool_to_ulogic_f; -- Function: Convert binary to gray ------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function bin_to_gray_f(input : std_ulogic_vector) return std_ulogic_vector is variable tmp_v : std_ulogic_vector(input'range); begin tmp_v(input'length-1) := input(input'length-1); -- keep MSB for i in input'length-2 downto 0 loop tmp_v(i) := input(i) xor input(i+1); end loop; -- i return tmp_v; end function bin_to_gray_f; -- Function: Convert gray to binary ------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function gray_to_bin_f(input : std_ulogic_vector) return std_ulogic_vector is variable tmp_v : std_ulogic_vector(input'range); begin tmp_v(input'length-1) := input(input'length-1); -- keep MSB for i in input'length-2 downto 0 loop tmp_v(i) := tmp_v(i+1) xor input(i); end loop; -- i return tmp_v; end function gray_to_bin_f; -- Function: OR-reduce all bits ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function or_reduce_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := '0'; for i in a'range loop tmp_v := tmp_v or a(i); end loop; -- i return tmp_v; end function or_reduce_f; -- Function: AND-reduce all bits ---------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function and_reduce_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := '1'; for i in a'range loop tmp_v := tmp_v and a(i); end loop; -- i return tmp_v; end function and_reduce_f; -- Function: XOR-reduce all bits ---------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function xor_reduce_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := '0'; for i in a'range loop tmp_v := tmp_v xor a(i); end loop; -- i return tmp_v; end function xor_reduce_f; -- Function: Convert std_ulogic_vector to hex char ---------------------------------------- -- ------------------------------------------------------------------------------------------- function to_hexchar_f(input : std_ulogic_vector(3 downto 0)) return character is variable output_v : character; begin case input is when x"0" => output_v := '0'; when x"1" => output_v := '1'; when x"2" => output_v := '2'; when x"3" => output_v := '3'; when x"4" => output_v := '4'; when x"5" => output_v := '5'; when x"6" => output_v := '6'; when x"7" => output_v := '7'; when x"8" => output_v := '8'; when x"9" => output_v := '9'; when x"a" => output_v := 'a'; when x"b" => output_v := 'b'; when x"c" => output_v := 'c'; when x"d" => output_v := 'd'; when x"e" => output_v := 'e'; when x"f" => output_v := 'f'; when others => output_v := '?'; end case; return output_v; end function to_hexchar_f; -- Function: Convert hex char to std_ulogic_vector ---------------------------------------- -- ------------------------------------------------------------------------------------------- function hexchar_to_stdulogicvector_f(input : character) return std_ulogic_vector is variable hex_value_v : std_ulogic_vector(3 downto 0); begin case input is when '0' => hex_value_v := x"0"; when '1' => hex_value_v := x"1"; when '2' => hex_value_v := x"2"; when '3' => hex_value_v := x"3"; when '4' => hex_value_v := x"4"; when '5' => hex_value_v := x"5"; when '6' => hex_value_v := x"6"; when '7' => hex_value_v := x"7"; when '8' => hex_value_v := x"8"; when '9' => hex_value_v := x"9"; when 'a' | 'A' => hex_value_v := x"a"; when 'b' | 'B' => hex_value_v := x"b"; when 'c' | 'C' => hex_value_v := x"c"; when 'd' | 'D' => hex_value_v := x"d"; when 'e' | 'E' => hex_value_v := x"e"; when 'f' | 'F' => hex_value_v := x"f"; when others => hex_value_v := (others => 'X'); end case; return hex_value_v; end function hexchar_to_stdulogicvector_f; -- Function: Bit reversal ----------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function bit_rev_f(input : std_ulogic_vector) return std_ulogic_vector is variable output_v : std_ulogic_vector(input'range); begin for i in 0 to input'length-1 loop output_v(input'length-i-1) := input(i); end loop; -- i return output_v; end function bit_rev_f; -- Function: Test if input number is a power of two --------------------------------------- -- ------------------------------------------------------------------------------------------- function is_power_of_two_f(input : natural) return boolean is begin if (input = 1) then -- 2^0 return true; elsif ((input / 2) /= 0) and ((input mod 2) = 0) then return true; else return false; end if; end function is_power_of_two_f; -- Function: Swap all bytes of a 32-bit word (endianness conversion) ---------------------- -- ------------------------------------------------------------------------------------------- function bswap32_f(input : std_ulogic_vector) return std_ulogic_vector is variable output_v : std_ulogic_vector(input'range); begin output_v(07 downto 00) := input(31 downto 24); output_v(15 downto 08) := input(23 downto 16); output_v(23 downto 16) := input(15 downto 08); output_v(31 downto 24) := input(07 downto 00); return output_v; end function bswap32_f; -- Function: Convert char to lowercase ---------------------------------------------------- -- ------------------------------------------------------------------------------------------- function char_to_lower_f(ch : character) return character is variable res: character; begin case ch is when 'A' => res := 'a'; when 'B' => res := 'b'; when 'C' => res := 'c'; when 'D' => res := 'd'; when 'E' => res := 'e'; when 'F' => res := 'f'; when 'G' => res := 'g'; when 'H' => res := 'h'; when 'I' => res := 'i'; when 'J' => res := 'j'; when 'K' => res := 'k'; when 'L' => res := 'l'; when 'M' => res := 'm'; when 'N' => res := 'n'; when 'O' => res := 'o'; when 'P' => res := 'p'; when 'Q' => res := 'q'; when 'R' => res := 'r'; when 'S' => res := 's'; when 'T' => res := 't'; when 'U' => res := 'u'; when 'V' => res := 'v'; when 'W' => res := 'w'; when 'X' => res := 'x'; when 'Y' => res := 'y'; when 'Z' => res := 'z'; when others => res := ch; end case; return res; end function char_to_lower_f; -- Function: Compare strings (convert to lower case, check lengths) ----------------------- -- ------------------------------------------------------------------------------------------- function str_equal_f(str0 : string; str1 : string) return boolean is variable tmp0_v : string(str0'range); variable tmp1_v : string(str1'range); begin if (str0'length /= str1'length) then -- equal length? return false; else -- convert to lower case -- for i in str0'range loop tmp0_v(i) := char_to_lower_f(str0(i)); end loop; for i in str1'range loop tmp1_v(i) := char_to_lower_f(str1(i)); end loop; -- compare lowercase strings -- if (tmp0_v = tmp1_v) then return true; else return false; end if; end if; end function str_equal_f; -- Function: Population count (number of set bits) ---------------------------------------- -- ------------------------------------------------------------------------------------------- function popcount_f(input : std_ulogic_vector) return natural is variable cnt_v : natural range 0 to input'length; begin cnt_v := 0; for i in input'length-1 downto 0 loop if (input(i) = '1') then cnt_v := cnt_v + 1; end if; end loop; -- i return cnt_v; end function popcount_f; -- Function: Count leading zeros ---------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function leading_zeros_f(input : std_ulogic_vector) return natural is variable cnt_v : natural range 0 to input'length; begin cnt_v := 0; for i in input'length-1 downto 0 loop if (input(i) = '0') then cnt_v := cnt_v + 1; else exit; end if; end loop; -- i return cnt_v; end function leading_zeros_f; -- Function: Initialize mem32_t array from another mem32_t array -------------------------- -- ------------------------------------------------------------------------------------------- -- impure function: returns NOT the same result every time it is evaluated with the same arguments since the source file might have changed impure function mem32_init_f(init : mem32_t; depth : natural) return mem32_t is variable mem_v : mem32_t(0 to depth-1); begin mem_v := (others => (others => '0')); -- make sure remaining memory entries are set to zero if (init'length > depth) then return mem_v; end if; for idx_v in 0 to init'length-1 loop -- init only in range of source data array mem_v(idx_v) := init(idx_v); end loop; -- idx_v return mem_v; end function mem32_init_f; -- Finally set deferred constant, see IEEE 1076-2008 14.4.2.1 (NEORV32 Issue #242) -------- -- ------------------------------------------------------------------------------------------- constant def_rst_val_c : std_ulogic := cond_sel_stdulogic_f(dedicated_reset_c, '0', '-'); end neorv32_package;
Go to most recent revision | Compare with Previous | Blame | View Log