URL
https://opencores.org/ocsvn/neorv32/neorv32/trunk
Subversion Repositories neorv32
[/] [neorv32/] [trunk/] [rtl/] [core/] [neorv32_package.vhd] - Rev 8
Go to most recent revision | Compare with Previous | Blame | View Log
-- ################################################################################################# -- # << NEORV32 - Main VHDL package file >> # -- # ********************************************************************************************* # -- # BSD 3-Clause License # -- # # -- # Copyright (c) 2020, Stephan Nolting. All rights reserved. # -- # # -- # Redistribution and use in source and binary forms, with or without modification, are # -- # permitted provided that the following conditions are met: # -- # # -- # 1. Redistributions of source code must retain the above copyright notice, this list of # -- # conditions and the following disclaimer. # -- # # -- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of # -- # conditions and the following disclaimer in the documentation and/or other materials # -- # provided with the distribution. # -- # # -- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to # -- # endorse or promote products derived from this software without specific prior written # -- # permission. # -- # # -- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS # -- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # -- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # -- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # -- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # -- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # -- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # -- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED # -- # OF THE POSSIBILITY OF SUCH DAMAGE. # -- # ********************************************************************************************* # -- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting # -- ################################################################################################# library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; package neorv32_package is -- Architecture Constants ----------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant data_width_c : natural := 32; -- data width - FIXED! constant hw_version_c : std_ulogic_vector(31 downto 0) := x"01000100"; -- no touchy! -- Internal Functions --------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function index_size_f(input : natural) return natural; function cond_sel_natural_f(cond : boolean; val_t : natural; val_f : natural) return natural; function cond_sel_stdulogicvector_f(cond : boolean; val_t : std_ulogic_vector; val_f : std_ulogic_vector) return std_ulogic_vector; function bool_to_ulogic_f(cond : boolean) return std_ulogic; function or_all_f( a : std_ulogic_vector) return std_ulogic; function and_all_f( a : std_ulogic_vector) return std_ulogic; function xor_all_f( a : std_ulogic_vector) return std_ulogic; function xnor_all_f(a : std_ulogic_vector) return std_ulogic; function to_hexchar_f(input : std_ulogic_vector(3 downto 0)) return character; -- Processor-internal Address Space Layout ------------------------------------------------ -- ------------------------------------------------------------------------------------------- -- Instruction Memory & Data Memory -- -- => configured via top's generics -- Bootloader ROM -- constant boot_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFF0000"; -- bootloader base address, fixed! constant boot_size_c : natural := 4*1024; -- bytes constant boot_max_size_c : natural := 32*1024; -- bytes, fixed! -- IO: Peripheral Devices ("IO") Area -- -- Control register(s) (including the device-enable) should be located at the base address of each device constant io_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFF80"; constant io_size_c : natural := 32*4; -- bytes, fixed! -- General Purpose Input/Output Unit (GPIO) -- constant gpio_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFF80"; -- base address, fixed! constant gpio_size_c : natural := 2*4; -- bytes, fixed! constant gpio_in_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(gpio_base_c) + x"00000000"); constant gpio_out_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(gpio_base_c) + x"00000004"); -- Core-Local Interrupt Controller (CLIC) -- constant clic_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFF88"; -- base address, fixed! constant clic_size_c : natural := 1*4; -- bytes, fixed! constant clic_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(clic_base_c) + x"00000000"); -- Watch Dog Timer (WDT) -- constant wdt_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFF8C"; -- base address, fixed! constant wdt_size_c : natural := 1*4; -- bytes, fixed! constant wdt_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(wdt_base_c) + x"00000000"); -- Machine System Timer (MTIME) -- constant mtime_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFF90"; -- base address, fixed! constant mtime_size_c : natural := 4*4; -- bytes, fixed! constant mtime_time_lo_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(mtime_base_c) + x"00000000"); constant mtime_time_hi_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(mtime_base_c) + x"00000004"); constant mtime_cmp_lo_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(mtime_base_c) + x"00000008"); constant mtime_cmp_hi_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(mtime_base_c) + x"0000000C"); -- Universal Asynchronous Receiver/Transmitter (UART) -- constant uart_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFA0"; -- base address, fixed! constant uart_size_c : natural := 2*4; -- bytes, fixed! constant uart_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(uart_base_c) + x"00000000"); constant uart_rtx_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(uart_base_c) + x"00000004"); -- Serial Peripheral Interface (SPI) -- constant spi_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFA8"; -- base address, fixed! constant spi_size_c : natural := 2*4; -- bytes, fixed! constant spi_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(spi_base_c) + x"00000000"); constant spi_rtx_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(spi_base_c) + x"00000004"); -- Two Wire Interface (TWI) -- constant twi_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFB0"; -- base address, fixed! constant twi_size_c : natural := 2*4; -- bytes, fixed! constant twi_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(twi_base_c) + x"00000000"); constant twi_rtx_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(twi_base_c) + x"00000004"); -- Pulse-Width Modulation Controller (PWM) -- constant pwm_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFB8"; -- base address, fixed! constant pwm_size_c : natural := 2*4; -- bytes, fixed! constant pwm_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(pwm_base_c) + x"00000000"); constant pwm_duty_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(pwm_base_c) + x"00000004"); -- True Random Number generator (TRNG) -- constant trng_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFC0"; -- base address, fixed! constant trng_size_c : natural := 2*4; -- bytes, fixed! constant trng_ctrl_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(trng_base_c) + x"00000000"); constant trng_data_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(trng_base_c) + x"00000004"); -- RESERVED -- --constant ???_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFC8"; -- base address, fixed! --constant ???_size_c : natural := 13*4; -- bytes, fixed! -- Dummy Device (with SIM output) (DEVNULL) -- constant devnull_base_c : std_ulogic_vector(data_width_c-1 downto 0) := x"FFFFFFFC"; -- base address, fixed! constant devnull_size_c : natural := 1*4; -- bytes, fixed! constant devnull_data_addr_c : std_ulogic_vector(31 downto 0) := std_ulogic_vector(unsigned(devnull_base_c) + x"00000000"); -- Main Control Bus ----------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- register file -- constant ctrl_rf_in_mux_lsb_c : natural := 0; -- input source select lsb (00=ALU, 01=MEM) constant ctrl_rf_in_mux_msb_c : natural := 1; -- input source select msb (10=PC, 11=CSR) constant ctrl_rf_rs1_adr0_c : natural := 2; -- source register 1 address bit 0 constant ctrl_rf_rs1_adr1_c : natural := 3; -- source register 1 address bit 1 constant ctrl_rf_rs1_adr2_c : natural := 4; -- source register 1 address bit 2 constant ctrl_rf_rs1_adr3_c : natural := 5; -- source register 1 address bit 3 constant ctrl_rf_rs1_adr4_c : natural := 6; -- source register 1 address bit 4 constant ctrl_rf_rs2_adr0_c : natural := 7; -- source register 2 address bit 0 constant ctrl_rf_rs2_adr1_c : natural := 8; -- source register 2 address bit 1 constant ctrl_rf_rs2_adr2_c : natural := 9; -- source register 2 address bit 2 constant ctrl_rf_rs2_adr3_c : natural := 10; -- source register 2 address bit 3 constant ctrl_rf_rs2_adr4_c : natural := 11; -- source register 2 address bit 4 constant ctrl_rf_rd_adr0_c : natural := 12; -- destiantion register address bit 0 constant ctrl_rf_rd_adr1_c : natural := 13; -- destiantion register address bit 1 constant ctrl_rf_rd_adr2_c : natural := 14; -- destiantion register address bit 2 constant ctrl_rf_rd_adr3_c : natural := 15; -- destiantion register address bit 3 constant ctrl_rf_rd_adr4_c : natural := 16; -- destiantion register address bit 4 constant ctrl_rf_wb_en_c : natural := 17; -- write back enable constant ctrl_rf_clear_rs1_c : natural := 18; -- force rs1=r0 constant ctrl_rf_clear_rs2_c : natural := 19; -- force rs2=r0 -- alu -- constant ctrl_alu_cmd0_c : natural := 20; -- ALU command bit 0 constant ctrl_alu_cmd1_c : natural := 21; -- ALU command bit 1 constant ctrl_alu_cmd2_c : natural := 22; -- ALU command bit 2 constant ctrl_alu_opa_mux_lsb_c : natural := 23; -- operand A select lsb (00=rs1, 01=PC) constant ctrl_alu_opa_mux_msb_c : natural := 24; -- operand A select msb (10=CSR, 11=?) constant ctrl_alu_opb_mux_lsb_c : natural := 25; -- operand B select lsb (00=rs2, 01=IMM) constant ctrl_alu_opb_mux_msb_c : natural := 26; -- operand B select msb (10=rs1, 11=?) constant ctrl_alu_opc_mux_c : natural := 27; -- operand C select (0=IMM, 1=rs2) constant ctrl_alu_unsigned_c : natural := 28; -- is unsigned ALU operation constant ctrl_alu_shift_dir_c : natural := 29; -- shift direction (0=left, 1=right) constant ctrl_alu_shift_ar_c : natural := 30; -- is arithmetic shift -- bus interface -- constant ctrl_bus_size_lsb_c : natural := 31; -- transfer size lsb (00=byte, 01=half-word) constant ctrl_bus_size_msb_c : natural := 32; -- transfer size msb (10=word, 11=?) constant ctrl_bus_rd_c : natural := 33; -- read data request constant ctrl_bus_wr_c : natural := 34; -- write data request constant ctrl_bus_if_c : natural := 35; -- instruction fetch request (1: output PC, 0: output MAR) constant ctrl_bus_mar_we_c : natural := 36; -- memory address register write enable constant ctrl_bus_mdo_we_c : natural := 37; -- memory data out register write enable constant ctrl_bus_mdi_we_c : natural := 38; -- memory data in register write enable constant ctrl_bus_unsigned_c : natural := 39; -- is unsigned load -- co-processor -- constant ctrl_cp_use_c : natural := 40; -- is cp operation constant ctrl_cp_id_lsb_c : natural := 41; -- cp select lsb constant ctrl_cp_id_msb_c : natural := 42; -- cp select msb constant ctrl_cp_cmd0_c : natural := 43; -- cp command bit 0 constant ctrl_cp_cmd1_c : natural := 44; -- cp command bit 1 constant ctrl_cp_cmd2_c : natural := 45; -- cp command bit 2 -- system -- constant ctrl_sys_c_ext_en_c : natural := 46; -- CPU C extension enabled constant ctrl_sys_m_ext_en_c : natural := 47; -- CPU M extension enabled -- control bus size -- constant ctrl_width_c : natural := 48; -- control bus size -- ALU Comparator Bus --------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant alu_cmp_equal_c : natural := 0; constant alu_cmp_less_c : natural := 1; -- for signed and unsigned comparisons -- RISC-V Opcode Layout ------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant instr_opcode_lsb_c : natural := 0; -- opcode bit 0 constant instr_opcode_msb_c : natural := 6; -- opcode bit 6 constant instr_rd_lsb_c : natural := 7; -- destination register address bit 0 constant instr_rd_msb_c : natural := 11; -- destination register address bit 4 constant instr_funct3_lsb_c : natural := 12; -- funct3 bit 0 constant instr_funct3_msb_c : natural := 14; -- funct3 bit 2 constant instr_rs1_lsb_c : natural := 15; -- source register 1 address bit 0 constant instr_rs1_msb_c : natural := 19; -- source register 1 address bit 4 constant instr_rs2_lsb_c : natural := 20; -- source register 2 address bit 0 constant instr_rs2_msb_c : natural := 24; -- source register 2 address bit 4 constant instr_funct7_lsb_c : natural := 25; -- funct7 bit 0 constant instr_funct7_msb_c : natural := 31; -- funct7 bit 6 constant instr_funct12_lsb_c : natural := 20; -- funct12 bit 0 constant instr_funct12_msb_c : natural := 31; -- funct12 bit 11 constant instr_imm12_lsb_c : natural := 20; -- immediate12 bit 0 constant instr_imm12_msb_c : natural := 31; -- immediate12 bit 11 constant instr_imm20_lsb_c : natural := 12; -- immediate20 bit 0 constant instr_imm20_msb_c : natural := 31; -- immediate20 bit 21 constant instr_csr_id_lsb_c : natural := 20; -- csr select bit 0 constant instr_csr_id_msb_c : natural := 31; -- csr select bit 11 -- RISC-V Opcodes ------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- alu -- constant opcode_lui_c : std_ulogic_vector(6 downto 0) := "0110111"; -- load upper immediate constant opcode_auipc_c : std_ulogic_vector(6 downto 0) := "0010111"; -- add upper immediate to PC constant opcode_alui_c : std_ulogic_vector(6 downto 0) := "0010011"; -- ALU operation with immediate (operation via funct3 and funct7) constant opcode_alu_c : std_ulogic_vector(6 downto 0) := "0110011"; -- ALU operation (operation via funct3 and funct7) -- control flow -- constant opcode_jal_c : std_ulogic_vector(6 downto 0) := "1101111"; -- jump and link constant opcode_jalr_c : std_ulogic_vector(6 downto 0) := "1100111"; -- jump and register constant opcode_branch_c : std_ulogic_vector(6 downto 0) := "1100011"; -- branch (condition set via funct3) -- memory access -- constant opcode_load_c : std_ulogic_vector(6 downto 0) := "0000011"; -- load (data type via funct3) constant opcode_store_c : std_ulogic_vector(6 downto 0) := "0100011"; -- store (data type via funct3) -- system/csr -- constant opcode_fence_c : std_ulogic_vector(6 downto 0) := "0001111"; -- fence / fence.i constant opcode_syscsr_c : std_ulogic_vector(6 downto 0) := "1110011"; -- system/csr access (type via funct3) -- RISC-V Funct3 -------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- control flow -- constant funct3_beq_c : std_ulogic_vector(2 downto 0) := "000"; -- branch if equal constant funct3_bne_c : std_ulogic_vector(2 downto 0) := "001"; -- branch if not equal constant funct3_blt_c : std_ulogic_vector(2 downto 0) := "100"; -- branch if less than constant funct3_bge_c : std_ulogic_vector(2 downto 0) := "101"; -- branch if greater than or equal constant funct3_bltu_c : std_ulogic_vector(2 downto 0) := "110"; -- branch if less than (unsigned) constant funct3_bgeu_c : std_ulogic_vector(2 downto 0) := "111"; -- branch if greater than or equal (unsigned) -- memory access -- constant funct3_lb_c : std_ulogic_vector(2 downto 0) := "000"; -- load byte constant funct3_lh_c : std_ulogic_vector(2 downto 0) := "001"; -- load half word constant funct3_lw_c : std_ulogic_vector(2 downto 0) := "010"; -- load word constant funct3_lbu_c : std_ulogic_vector(2 downto 0) := "100"; -- load byte (unsigned) constant funct3_lhu_c : std_ulogic_vector(2 downto 0) := "101"; -- load half word (unsigned) constant funct3_sb_c : std_ulogic_vector(2 downto 0) := "000"; -- store byte constant funct3_sh_c : std_ulogic_vector(2 downto 0) := "001"; -- store half word constant funct3_sw_c : std_ulogic_vector(2 downto 0) := "010"; -- store word -- alu -- constant funct3_subadd_c : std_ulogic_vector(2 downto 0) := "000"; -- sub/add via funct7 constant funct3_sll_c : std_ulogic_vector(2 downto 0) := "001"; -- shift logical left constant funct3_slt_c : std_ulogic_vector(2 downto 0) := "010"; -- set on less constant funct3_sltu_c : std_ulogic_vector(2 downto 0) := "011"; -- set on less unsigned constant funct3_xor_c : std_ulogic_vector(2 downto 0) := "100"; -- xor constant funct3_sr_c : std_ulogic_vector(2 downto 0) := "101"; -- shift right via funct7 constant funct3_or_c : std_ulogic_vector(2 downto 0) := "110"; -- or constant funct3_and_c : std_ulogic_vector(2 downto 0) := "111"; -- and -- system/csr -- constant funct3_env_c : std_ulogic_vector(2 downto 0) := "000"; -- ecall, ebreak, mret, wfi constant funct3_csrrw_c : std_ulogic_vector(2 downto 0) := "001"; -- atomic r/w constant funct3_csrrs_c : std_ulogic_vector(2 downto 0) := "010"; -- atomic read & set bit constant funct3_csrrc_c : std_ulogic_vector(2 downto 0) := "011"; -- atomic read & clear bit -- constant funct3_csrrwi_c : std_ulogic_vector(2 downto 0) := "101"; -- atomic r/w immediate constant funct3_csrrsi_c : std_ulogic_vector(2 downto 0) := "110"; -- atomic read & set bit immediate constant funct3_csrrci_c : std_ulogic_vector(2 downto 0) := "111"; -- atomic read & clear bit immediate -- fence -- constant funct3_fence_c : std_ulogic_vector(2 downto 0) := "000"; -- fence - order IO/memory access (->NOP) constant funct3_fencei_c : std_ulogic_vector(2 downto 0) := "001"; -- fencei - instructon stream sync -- Co-Processor Operations ---------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- cp ids -- constant cp_sel_muldiv_c : std_ulogic_vector(1 downto 0) := "00"; -- MULDIV CP -- muldiv cp -- constant cp_op_mul_c : std_ulogic_vector(2 downto 0) := "000"; -- mul constant cp_op_mulh_c : std_ulogic_vector(2 downto 0) := "001"; -- mulh constant cp_op_mulhsu_c : std_ulogic_vector(2 downto 0) := "010"; -- mulhsu constant cp_op_mulhu_c : std_ulogic_vector(2 downto 0) := "011"; -- mulhu constant cp_op_div_c : std_ulogic_vector(2 downto 0) := "100"; -- div constant cp_op_divu_c : std_ulogic_vector(2 downto 0) := "101"; -- divu constant cp_op_rem_c : std_ulogic_vector(2 downto 0) := "110"; -- rem constant cp_op_remu_c : std_ulogic_vector(2 downto 0) := "111"; -- remu -- ALU Function Codes --------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant alu_cmd_add_c : std_ulogic_vector(2 downto 0) := "000"; -- r <= A + B constant alu_cmd_sub_c : std_ulogic_vector(2 downto 0) := "001"; -- r <= A - B constant alu_cmd_slt_c : std_ulogic_vector(2 downto 0) := "010"; -- r <= A < B constant alu_cmd_shift_c : std_ulogic_vector(2 downto 0) := "011"; -- r <= A <</>> B constant alu_cmd_xor_c : std_ulogic_vector(2 downto 0) := "100"; -- r <= A xor B constant alu_cmd_or_c : std_ulogic_vector(2 downto 0) := "101"; -- r <= A or B constant alu_cmd_and_c : std_ulogic_vector(2 downto 0) := "110"; -- r <= A and B constant alu_cmd_bitc_c : std_ulogic_vector(2 downto 0) := "111"; -- r <= A and (not B) -- CPU Control Exception System ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- -- exception source bits -- constant exception_iaccess_c : natural := 0; -- instrution access fault constant exception_iillegal_c : natural := 1; -- illegal instrution constant exception_ialign_c : natural := 2; -- instrution address misaligned constant exception_m_envcall_c : natural := 3; -- ENV call from m-mode constant exception_break_c : natural := 4; -- breakpoint constant exception_salign_c : natural := 5; -- store address misaligned constant exception_lalign_c : natural := 6; -- load address misaligned constant exception_saccess_c : natural := 7; -- store access fault constant exception_laccess_c : natural := 8; -- load access fault constant exception_width_c : natural := 9; -- length of this list in bits -- interrupt source bits -- constant interrupt_mtime_irq_c : natural := 0; -- machine timer interrupt constant interrupt_msw_irq_c : natural := 1; -- machine sw interrupt constant interrupt_mext_irq_c : natural := 2; -- machine external interrupt constant interrupt_width_c : natural := 3; -- length of this list in bits -- Clock Generator ------------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- constant clk_div2_c : natural := 0; constant clk_div4_c : natural := 1; constant clk_div8_c : natural := 2; constant clk_div64_c : natural := 3; constant clk_div128_c : natural := 4; constant clk_div1024_c : natural := 5; constant clk_div2048_c : natural := 6; constant clk_div4096_c : natural := 7; -- Component: NEORV32 Processor Top Entity ------------------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_top generic ( -- General -- CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz HART_ID : std_ulogic_vector(31 downto 0) := x"00000000"; -- custom hardware thread ID BOOTLOADER_USE : boolean := true; -- implement processor-internal bootloader? CSR_COUNTERS_USE : boolean := true; -- implement RISC-V perf. counters ([m]instret[h], [m]cycle[h], time[h])? -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_C : boolean := true; -- implement compressed extension? CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension? CPU_EXTENSION_RISCV_M : boolean := true; -- implement muld/div extension? CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system? CPU_EXTENSION_RISCV_Zifencei : boolean := true; -- implement instruction stream sync.? -- Memory configuration: Instruction memory -- MEM_ISPACE_BASE : std_ulogic_vector(31 downto 0) := x"00000000"; -- base address of instruction memory space MEM_ISPACE_SIZE : natural := 16*1024; -- total size of instruction memory space in byte MEM_INT_IMEM_USE : boolean := true; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural := 16*1024; -- size of processor-internal instruction memory in bytes MEM_INT_IMEM_ROM : boolean := false; -- implement processor-internal instruction memory as ROM -- Memory configuration: Data memory -- MEM_DSPACE_BASE : std_ulogic_vector(31 downto 0) := x"80000000"; -- base address of data memory space MEM_DSPACE_SIZE : natural := 8*1024; -- total size of data memory space in byte MEM_INT_DMEM_USE : boolean := true; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural := 8*1024; -- size of processor-internal data memory in bytes -- Memory configuration: External memory interface -- MEM_EXT_USE : boolean := false; -- implement external memory bus interface? MEM_EXT_REG_STAGES : natural := 2; -- number of interface register stages (0,1,2) MEM_EXT_TIMEOUT : natural := 15; -- cycles after which a valid bus access will timeout (>=1) -- Processor peripherals -- IO_GPIO_USE : boolean := true; -- implement general purpose input/output port unit (GPIO)? IO_MTIME_USE : boolean := true; -- implement machine system timer (MTIME)? IO_UART_USE : boolean := true; -- implement universal asynchronous receiver/transmitter (UART)? IO_SPI_USE : boolean := true; -- implement serial peripheral interface (SPI)? IO_TWI_USE : boolean := true; -- implement two-wire interface (TWI)? IO_PWM_USE : boolean := true; -- implement pulse-width modulation unit (PWM)? IO_WDT_USE : boolean := true; -- implement watch dog timer (WDT)? IO_CLIC_USE : boolean := true; -- implement core local interrupt controller (CLIC)? IO_TRNG_USE : boolean := false; -- implement true random number generator (TRNG)? IO_DEVNULL_USE : boolean := true -- implement dummy device (DEVNULL)? ); port ( -- Global control -- clk_i : in std_ulogic := '0'; -- global clock, rising edge rstn_i : in std_ulogic := '0'; -- global reset, low-active, async -- Wishbone bus interface -- wb_adr_o : out std_ulogic_vector(31 downto 0); -- address wb_dat_i : in std_ulogic_vector(31 downto 0) := (others => '0'); -- read data wb_dat_o : out std_ulogic_vector(31 downto 0); -- write data wb_we_o : out std_ulogic; -- read/write wb_sel_o : out std_ulogic_vector(03 downto 0); -- byte enable wb_stb_o : out std_ulogic; -- strobe wb_cyc_o : out std_ulogic; -- valid cycle wb_ack_i : in std_ulogic := '0'; -- transfer acknowledge wb_err_i : in std_ulogic := '0'; -- transfer error -- GPIO -- gpio_o : out std_ulogic_vector(15 downto 0); -- parallel output gpio_i : in std_ulogic_vector(15 downto 0) := (others => '0'); -- parallel input -- UART -- uart_txd_o : out std_ulogic; -- UART send data uart_rxd_i : in std_ulogic := '0'; -- UART receive data -- SPI -- spi_sck_o : out std_ulogic; -- SPI serial clock spi_sdo_o : out std_ulogic; -- controller data out, peripheral data in spi_sdi_i : in std_ulogic; -- controller data in, peripheral data out spi_csn_o : out std_ulogic_vector(07 downto 0); -- SPI CS -- TWI -- twi_sda_io : inout std_logic := 'H'; -- twi serial data line twi_scl_io : inout std_logic := 'H'; -- twi serial clock line -- PWM -- pwm_o : out std_ulogic_vector(03 downto 0); -- pwm channels -- Interrupts -- ext_irq_i : in std_ulogic_vector(01 downto 0) := (others => '0'); -- external interrupt request ext_ack_o : out std_ulogic_vector(01 downto 0) -- external interrupt request acknowledge ); end component; -- Component: CPU Top Entity -------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu generic ( -- General -- CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz HART_ID : std_ulogic_vector(31 downto 0) := x"00000000"; -- custom hardware thread ID BOOTLOADER_USE : boolean := true; -- implement processor-internal bootloader? CSR_COUNTERS_USE : boolean := true; -- implement RISC-V perf. counters ([m]instret[h], [m]cycle[h], time[h])? -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_C : boolean := false; -- implement compressed extension? CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension? CPU_EXTENSION_RISCV_M : boolean := false; -- implement muld/div extension? CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system? CPU_EXTENSION_RISCV_Zifencei : boolean := true; -- implement instruction stream sync.? -- Memory configuration: Instruction memory -- MEM_ISPACE_BASE : std_ulogic_vector(31 downto 0) := x"00000000"; -- base address of instruction memory space MEM_ISPACE_SIZE : natural := 8*1024; -- total size of instruction memory space in byte MEM_INT_IMEM_USE : boolean := true; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural := 8*1024; -- size of processor-internal instruction memory in bytes MEM_INT_IMEM_ROM : boolean := false; -- implement processor-internal instruction memory as ROM -- Memory configuration: Data memory -- MEM_DSPACE_BASE : std_ulogic_vector(31 downto 0) := x"80000000"; -- base address of data memory space MEM_DSPACE_SIZE : natural := 4*1024; -- total size of data memory space in byte MEM_INT_DMEM_USE : boolean := true; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural := 4*1024; -- size of processor-internal data memory in bytes -- Memory configuration: External memory interface -- MEM_EXT_USE : boolean := false; -- implement external memory bus interface? MEM_EXT_TIMEOUT : natural := 15; -- cycles after which a valid bus access will timeout -- Processor peripherals -- IO_GPIO_USE : boolean := true; -- implement general purpose input/output port unit (GPIO)? IO_MTIME_USE : boolean := true; -- implement machine system timer (MTIME)? IO_UART_USE : boolean := true; -- implement universal asynchronous receiver/transmitter (UART)? IO_SPI_USE : boolean := true; -- implement serial peripheral interface (SPI)? IO_TWI_USE : boolean := true; -- implement two-wire interface (TWI)? IO_PWM_USE : boolean := true; -- implement pulse-width modulation unit (PWM)? IO_WDT_USE : boolean := true; -- implement watch dog timer (WDT)? IO_CLIC_USE : boolean := true; -- implement core local interrupt controller (CLIC)? IO_TRNG_USE : boolean := true; -- implement true random number generator (TRNG)? IO_DEVNULL_USE : boolean := true -- implement dummy device (DEVNULL)? ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async -- bus interface -- bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable bus_we_o : out std_ulogic; -- write enable bus_re_o : out std_ulogic; -- read enable bus_ack_i : in std_ulogic; -- bus transfer acknowledge bus_err_i : in std_ulogic; -- bus transfer error -- external interrupts -- clic_irq_i : in std_ulogic; -- CLIC interrupt request mtime_irq_i : in std_ulogic -- machine timer interrupt ); end component; -- Component: CPU Control ----------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_control generic ( -- General -- CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz HART_ID : std_ulogic_vector(31 downto 0) := x"00000000"; -- custom hardware thread ID BOOTLOADER_USE : boolean := true; -- implement processor-internal bootloader? CSR_COUNTERS_USE : boolean := true; -- implement RISC-V perf. counters ([m]instret[h], [m]cycle[h], time[h])? -- RISC-V CPU Extensions -- CPU_EXTENSION_RISCV_C : boolean := false; -- implement compressed extension? CPU_EXTENSION_RISCV_E : boolean := false; -- implement embedded RF extension? CPU_EXTENSION_RISCV_M : boolean := false; -- implement muld/div extension? CPU_EXTENSION_RISCV_Zicsr : boolean := true; -- implement CSR system? CPU_EXTENSION_RISCV_Zifencei : boolean := true; -- implement instruction stream sync.? -- Memory configuration: Instruction memory -- MEM_ISPACE_BASE : std_ulogic_vector(31 downto 0) := x"00000000"; -- base address of instruction memory space MEM_ISPACE_SIZE : natural := 16*1024; -- total size of instruction memory space in byte MEM_INT_IMEM_USE : boolean := true; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural := 16*1024; -- size of processor-internal instruction memory in bytes MEM_INT_IMEM_ROM : boolean := false; -- implement processor-internal instruction memory as ROM -- Memory configuration: Data memory -- MEM_DSPACE_BASE : std_ulogic_vector(31 downto 0) := x"80000000"; -- base address of data memory space MEM_DSPACE_SIZE : natural := 8*1024; -- total size of data memory space in byte MEM_INT_DMEM_USE : boolean := true; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural := 8*1024; -- size of processor-internal data memory in bytes -- Memory configuration: External memory interface -- MEM_EXT_USE : boolean := false; -- implement external memory bus interface? -- Processor peripherals -- IO_GPIO_USE : boolean := true; -- implement general purpose input/output port unit (GPIO)? IO_MTIME_USE : boolean := true; -- implement machine system timer (MTIME)? IO_UART_USE : boolean := true; -- implement universal asynchronous receiver/transmitter (UART)? IO_SPI_USE : boolean := true; -- implement serial peripheral interface (SPI)? IO_TWI_USE : boolean := true; -- implement two-wire interface (TWI)? IO_PWM_USE : boolean := true; -- implement pulse-width modulation unit (PWM)? IO_WDT_USE : boolean := true; -- implement watch dog timer (WDT)? IO_CLIC_USE : boolean := true; -- implement core local interrupt controller (CLIC)? IO_TRNG_USE : boolean := true; -- implement true random number generator (TRNG)? IO_DEVNULL_USE : boolean := true -- implement dummy device (DEVNULL)? ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_o : out std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- status input -- alu_wait_i : in std_ulogic; -- wait for ALU bus_wait_i : in std_ulogic; -- wait for bus -- data input -- instr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- instruction cmp_i : in std_ulogic_vector(1 downto 0); -- comparator status alu_add_i : in std_ulogic_vector(data_width_c-1 downto 0); -- ALU.add result -- data output -- imm_o : out std_ulogic_vector(data_width_c-1 downto 0); -- immediate fetch_pc_o : out std_ulogic_vector(data_width_c-1 downto 0); -- PC for instruction fetch curr_pc_o : out std_ulogic_vector(data_width_c-1 downto 0); -- current PC (corresponding to current instruction) next_pc_o : out std_ulogic_vector(data_width_c-1 downto 0); -- next PC (corresponding to current instruction) -- csr interface -- csr_wdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- CSR write data csr_rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- CSR read data -- external interrupt -- clic_irq_i : in std_ulogic; -- CLIC interrupt request mtime_irq_i : in std_ulogic; -- machine timer interrupt -- bus access exceptions -- mar_i : in std_ulogic_vector(data_width_c-1 downto 0); -- memory address register ma_instr_i : in std_ulogic; -- misaligned instruction address ma_load_i : in std_ulogic; -- misaligned load data address ma_store_i : in std_ulogic; -- misaligned store data address be_instr_i : in std_ulogic; -- bus error on instruction access be_load_i : in std_ulogic; -- bus error on load data access be_store_i : in std_ulogic; -- bus error on store data access bus_exc_ack_o : out std_ulogic; -- bus exception error acknowledge bus_busy_i : in std_ulogic -- bus unit is busy ); end component; -- Component: CPU Register File ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_regfile generic ( CPU_EXTENSION_RISCV_E : boolean := false -- implement embedded RF extension? ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- data input -- mem_i : in std_ulogic_vector(data_width_c-1 downto 0); -- memory read data alu_i : in std_ulogic_vector(data_width_c-1 downto 0); -- ALU result csr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- CSR read data pc_i : in std_ulogic_vector(data_width_c-1 downto 0); -- current pc -- data output -- rs1_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operand 1 rs2_o : out std_ulogic_vector(data_width_c-1 downto 0) -- operand 2 ); end component; -- Component: CPU ALU --------------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_alu port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- data input -- rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 pc2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- delayed PC imm_i : in std_ulogic_vector(data_width_c-1 downto 0); -- immediate csr_i : in std_ulogic_vector(data_width_c-1 downto 0); -- csr read data -- data output -- cmp_o : out std_ulogic_vector(1 downto 0); -- comparator status add_o : out std_ulogic_vector(data_width_c-1 downto 0); -- OPA + OPB res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- ALU result -- co-processor interface -- cp0_data_i : in std_ulogic_vector(data_width_c-1 downto 0); -- co-processor 0 result cp0_valid_i : in std_ulogic; -- co-processor 0 result valid cp1_data_i : in std_ulogic_vector(data_width_c-1 downto 0); -- co-processor 1 result cp1_valid_i : in std_ulogic; -- co-processor 1 result valid -- status -- wait_o : out std_ulogic -- busy due to iterative processing units ); end component; -- Component: CPU Co-Processor MULDIV ----------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_cp_muldiv port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- data input -- rs1_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 1 rs2_i : in std_ulogic_vector(data_width_c-1 downto 0); -- rf source 2 -- result and status -- res_o : out std_ulogic_vector(data_width_c-1 downto 0); -- operation result valid_o : out std_ulogic -- data output valid ); end component; -- Component: CPU Bus Interface ----------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_cpu_bus generic ( MEM_EXT_TIMEOUT : natural := 15 -- cycles after which a valid bus access will timeout ); port ( -- global control -- clk_i : in std_ulogic; -- global clock, rising edge rstn_i : in std_ulogic; -- global reset, low-active, async ctrl_i : in std_ulogic_vector(ctrl_width_c-1 downto 0); -- main control bus -- data input -- wdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- write data pc_i : in std_ulogic_vector(data_width_c-1 downto 0); -- current PC alu_i : in std_ulogic_vector(data_width_c-1 downto 0); -- ALU result -- data output -- instr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- instruction rdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- read data -- status -- mar_o : out std_ulogic_vector(data_width_c-1 downto 0); -- current memory address register ma_instr_o : out std_ulogic; -- misaligned instruction address ma_load_o : out std_ulogic; -- misaligned load data address ma_store_o : out std_ulogic; -- misaligned store data address be_instr_o : out std_ulogic; -- bus error on instruction access be_load_o : out std_ulogic; -- bus error on load data access be_store_o : out std_ulogic; -- bus error on store data bus_wait_o : out std_ulogic; -- wait for bus operation to finish bus_busy_o : out std_ulogic; -- bus unit is busy exc_ack_i : in std_ulogic; -- exception controller ACK -- bus system -- bus_addr_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus access address bus_rdata_i : in std_ulogic_vector(data_width_c-1 downto 0); -- bus read data bus_wdata_o : out std_ulogic_vector(data_width_c-1 downto 0); -- bus write data bus_ben_o : out std_ulogic_vector(03 downto 0); -- byte enable bus_we_o : out std_ulogic; -- write enable bus_re_o : out std_ulogic; -- read enable bus_ack_i : in std_ulogic; -- bus transfer acknowledge bus_err_i : in std_ulogic -- bus transfer error ); end component; -- Component: CPU Compressed Instructions Decompressor ------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_cpu_decompressor port ( -- instruction input -- ci_instr16_i : in std_ulogic_vector(15 downto 0); -- compressed instruction input -- instruction output -- ci_illegal_o : out std_ulogic; -- is an illegal compressed instruction ci_instr32_o : out std_ulogic_vector(31 downto 0) -- 32-bit decompressed instruction ); end component; -- Component: Processor-internal instruction memory (IMEM) -------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_imem generic ( IMEM_BASE : std_ulogic_vector(31 downto 0) := x"00000000"; -- memory base address IMEM_SIZE : natural := 4*1024; -- processor-internal instruction memory size in bytes IMEM_AS_ROM : boolean := false; -- implement IMEM as read-only memory? BOOTLOADER_USE : boolean := true -- implement and use bootloader? ); port ( clk_i : in std_ulogic; -- global clock line rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable upen_i : in std_ulogic; -- update enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; -- Component: Processor-internal data memory (DMEM) --------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_dmem generic ( DMEM_BASE : std_ulogic_vector(31 downto 0) := x"80000000"; -- memory base address DMEM_SIZE : natural := 4*1024 -- processor-internal instruction memory size in bytes ); port ( clk_i : in std_ulogic; -- global clock line rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; -- Component: Processor-internal bootloader ROM (BOOTROM) --------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_boot_rom port ( clk_i : in std_ulogic; -- global clock line rden_i : in std_ulogic; -- read enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; -- Component: Machine System Timer (mtime) ------------------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_mtime port ( -- host access -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic := '0'; -- global reset, low-active, async addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- interrupt -- irq_o : out std_ulogic -- interrupt request ); end component; -- Component: General Purpose Input/Output Port (GPIO) ------------------------------------ -- ------------------------------------------------------------------------------------------- component neorv32_gpio port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- parallel io -- gpio_o : out std_ulogic_vector(15 downto 0); gpio_i : in std_ulogic_vector(15 downto 0); -- interrupt -- irq_o : out std_ulogic ); end component; -- Component: Core Local Interrupt Controller (CLIC) -------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_clic port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- cpu interrupt -- cpu_irq_o : out std_ulogic; -- trigger CPU's external IRQ -- external interrupt lines -- ext_irq_i : in std_ulogic_vector(07 downto 0); -- IRQ, triggering on HIGH level ext_ack_o : out std_ulogic_vector(07 downto 0) -- acknowledge ); end component; -- Component: Watchdog Timer (WDT) -------------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_wdt port ( -- host access -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable addr_i : in std_ulogic_vector(31 downto 0); -- address data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- timeout event -- irq_o : out std_ulogic; -- timeout IRQ rstn_o : out std_ulogic -- timeout reset, low_active, use it as async! ); end component; -- Component: Universal Asynchronous Receiver and Transmitter (UART) ---------------------- -- ------------------------------------------------------------------------------------------- component neorv32_uart port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- com lines -- uart_txd_o : out std_ulogic; uart_rxd_i : in std_ulogic; -- interrupts -- uart_irq_o : out std_ulogic -- uart rx/tx interrupt ); end component; -- Component: Serial Peripheral Interface (SPI) ------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_spi port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- com lines -- spi_sck_o : out std_ulogic; -- SPI serial clock spi_sdo_o : out std_ulogic; -- controller data out, peripheral data in spi_sdi_i : in std_ulogic; -- controller data in, peripheral data out spi_csn_o : out std_ulogic_vector(07 downto 0); -- SPI CS -- interrupt -- spi_irq_o : out std_ulogic -- transmission done interrupt ); end component; -- Component: Two-Wire Interface (TWI) ---------------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_twi port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- com lines -- twi_sda_io : inout std_logic; -- serial data line twi_scl_io : inout std_logic; -- serial clock line -- interrupt -- twi_irq_o : out std_ulogic -- transfer done IRQ ); end component; -- Component: Pulse-Width Modulation Controller (PWM) ------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_pwm port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge -- clock generator -- clkgen_en_o : out std_ulogic; -- enable clock generator clkgen_i : in std_ulogic_vector(07 downto 0); -- pwm output channels -- pwm_o : out std_ulogic_vector(03 downto 0) ); end component; -- Component: True Random Number Generator (TRNG) ----------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_trng port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; -- Component: Wishbone Bus Gateway (WISHBONE) --------------------------------------------- -- ------------------------------------------------------------------------------------------- component neorv32_wishbone generic ( INTERFACE_REG_STAGES : natural := 2; -- number of interface register stages (0,1,2) -- Memory configuration: Instruction memory -- MEM_ISPACE_BASE : std_ulogic_vector(31 downto 0) := x"00000000"; -- base address of instruction memory space MEM_ISPACE_SIZE : natural := 8*1024; -- total size of instruction memory space in byte MEM_INT_IMEM_USE : boolean := true; -- implement processor-internal instruction memory MEM_INT_IMEM_SIZE : natural := 8*1024; -- size of processor-internal instruction memory in bytes -- Memory configuration: Data memory -- MEM_DSPACE_BASE : std_ulogic_vector(31 downto 0) := x"80000000"; -- base address of data memory space MEM_DSPACE_SIZE : natural := 4*1024; -- total size of data memory space in byte MEM_INT_DMEM_USE : boolean := true; -- implement processor-internal data memory MEM_INT_DMEM_SIZE : natural := 4*1024 -- size of processor-internal data memory in bytes ); port ( -- global control -- clk_i : in std_ulogic; -- global clock line rstn_i : in std_ulogic; -- global reset line, low-active -- host access -- addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic; -- transfer acknowledge err_o : out std_ulogic; -- transfer error -- wishbone interface -- wb_adr_o : out std_ulogic_vector(31 downto 0); -- address wb_dat_i : in std_ulogic_vector(31 downto 0); -- read data wb_dat_o : out std_ulogic_vector(31 downto 0); -- write data wb_we_o : out std_ulogic; -- read/write wb_sel_o : out std_ulogic_vector(03 downto 0); -- byte enable wb_stb_o : out std_ulogic; -- strobe wb_cyc_o : out std_ulogic; -- valid cycle wb_ack_i : in std_ulogic; -- transfer acknowledge wb_err_i : in std_ulogic -- transfer error ); end component; ---- Component: Dummy Device with SIM Output (DEVNULL) ------------------------------------- ---- ------------------------------------------------------------------------------------------- component neorv32_devnull port ( -- host access -- clk_i : in std_ulogic; -- global clock line addr_i : in std_ulogic_vector(31 downto 0); -- address rden_i : in std_ulogic; -- read enable wren_i : in std_ulogic; -- write enable ben_i : in std_ulogic_vector(03 downto 0); -- byte write enable data_i : in std_ulogic_vector(31 downto 0); -- data in data_o : out std_ulogic_vector(31 downto 0); -- data out ack_o : out std_ulogic -- transfer acknowledge ); end component; end neorv32_package; package body neorv32_package is -- Function: Minimal required bit width --------------------------------------------------- -- ------------------------------------------------------------------------------------------- function index_size_f(input : natural) return natural is begin for i in 0 to natural'high loop if (2**i >= input) then return i; end if; end loop; -- i return 0; end function index_size_f; -- Function: Conditional select natural --------------------------------------------------- -- ------------------------------------------------------------------------------------------- function cond_sel_natural_f(cond : boolean; val_t : natural; val_f : natural) return natural is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_natural_f; -- Function: Conditional select std_ulogic_vector ----------------------------------------- -- ------------------------------------------------------------------------------------------- function cond_sel_stdulogicvector_f(cond : boolean; val_t : std_ulogic_vector; val_f : std_ulogic_vector) return std_ulogic_vector is begin if (cond = true) then return val_t; else return val_f; end if; end function cond_sel_stdulogicvector_f; -- Function: Convert BOOL to STD_ULOGIC --------------------------------------------------- -- ------------------------------------------------------------------------------------------- function bool_to_ulogic_f(cond : boolean) return std_ulogic is begin if (cond = true) then return '1'; else return '0'; end if; end function bool_to_ulogic_f; -- Function: OR all bits ------------------------------------------------------------------ -- ------------------------------------------------------------------------------------------- function or_all_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := a(a'low); for i in a'low+1 to a'high loop tmp_v := tmp_v or a(i); end loop; -- i return tmp_v; end function or_all_f; -- Function: AND all bits ----------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function and_all_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := a(a'low); for i in a'low+1 to a'high loop tmp_v := tmp_v and a(i); end loop; -- i return tmp_v; end function and_all_f; -- Function: XOR all bits ----------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function xor_all_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := a(a'low); for i in a'low+1 to a'high loop tmp_v := tmp_v xor a(i); end loop; -- i return tmp_v; end function xor_all_f; -- Function: XNOR all bits ---------------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function xnor_all_f(a : std_ulogic_vector) return std_ulogic is variable tmp_v : std_ulogic; begin tmp_v := a(a'low); for i in a'low+1 to a'high loop tmp_v := tmp_v xnor a(i); end loop; -- i return tmp_v; end function xnor_all_f; -- Function: Convert to hex char ---------------------------------------------------------- -- ------------------------------------------------------------------------------------------- function to_hexchar_f(input : std_ulogic_vector(3 downto 0)) return character is variable output_v : character; begin case input is when x"0" => output_v := '0'; when x"1" => output_v := '1'; when x"2" => output_v := '2'; when x"3" => output_v := '3'; when x"4" => output_v := '4'; when x"5" => output_v := '5'; when x"6" => output_v := '6'; when x"7" => output_v := '7'; when x"8" => output_v := '8'; when x"9" => output_v := '9'; when x"a" => output_v := 'a'; when x"b" => output_v := 'b'; when x"c" => output_v := 'c'; when x"d" => output_v := 'd'; when x"e" => output_v := 'e'; when x"f" => output_v := 'f'; when others => output_v := '?'; end case; return output_v; end function to_hexchar_f; end neorv32_package;
Go to most recent revision | Compare with Previous | Blame | View Log