Subversion Repositories neorv32

/* ################################################################################################# */
/* # << NEORV32 - crt0.S - Start-Up Code >>                                                        # */
/* # ********************************************************************************************* # */
/* # BSD 3-Clause License                                                                          # */
/* #                                                                                               # */
/* # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     # */
/* #                                                                                               # */
/* # Redistribution and use in source and binary forms, with or without modification, are          # */
/* # permitted provided that the following conditions are met:                                     # */
/* #                                                                                               # */
/* # 1. Redistributions of source code must retain the above copyright notice, this list of        # */
/* #    conditions and the following disclaimer.                                                   # */
/* #                                                                                               # */
/* # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     # */
/* #    conditions and the following disclaimer in the documentation and/or other materials        # */
/* #    provided with the distribution.                                                            # */
/* #                                                                                               # */
/* # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  # */
/* #    endorse or promote products derived from this software without specific prior written      # */
/* #    permission.                                                                                # */
/* #                                                                                               # */
/* # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   # */
/* # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               # */
/* # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    # */
/* # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     # */
/* # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # */
/* # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    # */
/* # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     # */
/* # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  # */
/* # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            # */
/* # ********************************************************************************************* # */
/* # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting # */
/* ################################################################################################# */

.file   "crt0.S"
.section .text.boot
.balign 4
.global _start


// IO region
.equ IO_BEGIN, 0xFFFFFF80 // start of processor-internal IO region


_start:
.cfi_startproc
.cfi_undefined ra

// *********************************************************
// Clear register file (lower half, assume E extension)
// *********************************************************
__crt0_reg_file_clear:
//addi  x0, x0, 0 // hardwired to zero
  addi  x1, x0, 0
  addi  x2, x0, 0
  addi  x3, x0, 0
  addi  x4, x0, 0
  addi  x5, x0, 0
  addi  x6, x0, 0
  addi  x7, x0, 0
  addi  x8, x0, 0
  addi  x9, x0, 0
//addi x10, x0, 0
//addi x11, x0, 0
//addi x12, x0, 0
//addi x13, x0, 0
  addi x14, x0, 0
  addi x15, x0, 0


// *********************************************************
// Clear register file (upper half, if no E extension)
// *********************************************************
#ifndef __riscv_32e
// save some program space if compiling bootloader
#ifndef make_bootloader
  addi x16, x0, 0
  addi x17, x0, 0
  addi x18, x0, 0
  addi x19, x0, 0
  addi x20, x0, 0
  addi x21, x0, 0
  addi x22, x0, 0
  addi x23, x0, 0
  addi x24, x0, 0
  addi x25, x0, 0
  addi x26, x0, 0
  addi x27, x0, 0
  addi x28, x0, 0
  addi x29, x0, 0
  addi x30, x0, 0
  addi x31, x0, 0
#endif
#endif


// *********************************************************
// No interrupts, thanks
// *********************************************************
__crt0_status_init:
  li x10, 0x00001800    // clear mstatus and set mpp(1:0)
  csrrw zero, mstatus, x10
  csrrw zero, mie, zero // clear mie


// *********************************************************
// Setup pointers using linker script symbols
// *********************************************************
__crt0_pointer_init:
.option push
.option norelax
  la    sp, __crt0_stack_begin
  andi  sp, sp, 0xfffffffc // make sure this is aligned
  addi  fp, sp, 0          // frame pointer = stack pointer
  la gp, __global_pointer$ // global pointer
.option pop


// *********************************************************
// Initialize dummy trap handler base address
// *********************************************************
__crt0_neorv32_trap_init:
  la    x11, __crt0_dummy_trap_handler
  csrw  mtvec, x11 // set address of first-level exception handler


// *********************************************************
// Reset/deactivate IO/peripheral devices
// Devices, that are not implemented, will cause a store access fault
// which is captured but actually ignored due to the dummy handler.
// *********************************************************
__crt0_reset_io:
  li x11, IO_BEGIN // start of processor-internal IO region

__crt0_reset_io_loop:
  sw   zero, 0(x11)
  addi x11, x11, 4
  bne  zero, x11, __crt0_reset_io_loop


// *********************************************************
// Clear .bss section (byte-wise) using linker script symbols
// *********************************************************
__crt0_clear_bss:
  la x11, __crt0_bss_start
  la x12, __crt0_bss_end

__crt0_clear_bss_loop:
  bge  x11, x12, __crt0_clear_bss_loop_end
  sb   zero, 0(x11)
  addi x11, x11, 1
  j    __crt0_clear_bss_loop

__crt0_clear_bss_loop_end:


// *********************************************************
// Copy initialized .data section from ROM to RAM (byte-wise) using linker script symbols
// *********************************************************
__crt0_copy_data:
  la x11, __crt0_copy_data_src_begin  // start of data area (copy source)
  la x12, __crt0_copy_data_dst_begin  // start of data area (copy destination)
  la x13, __crt0_copy_data_dst_end    // last address of destination data area

__crt0_copy_data_loop:
  bge  x12, x13,  __crt0_copy_data_loop_end
  lb   x14, 0(x11)
  sb   x14, 0(x12)
  addi x11, x11, 1
  addi x12, x12, 1
  j    __crt0_copy_data_loop

__crt0_copy_data_loop_end:


// *********************************************************
// Call main function
// *********************************************************
__crt0_main_entry:

  // setup arguments for calling main
  addi x10, zero, 0 // argc = 0
  addi x11, zero, 0 // argv = 0

  // clear cycle and instruction counters
  csrw mcycle,    zero
  csrw mcycleh,   zero
  csrw minstret,  zero
  csrw minstreth, zero

  jal ra, main


// *********************************************************
// Go to endless sleep mode if main returns
// *********************************************************
__crt0_this_is_the_end:
  csrrci zero, mstatus, 8 // mstatus: disable global IRQs (MIE)
  nop
  wfi
__crt0_this_is_the_end_my_friend:
  j __crt0_this_is_the_end_my_friend // in case WFI is not available


// *********************************************************
// dummy trap handler (for exceptions & IRQs)
// tries to move on to next instruction
// *********************************************************
.global __crt0_dummy_trap_handler
.balign 4
__crt0_dummy_trap_handler:

  addi  sp, sp, -8
  sw      x8, 0(sp)
  sw      x9, 4(sp)

  csrr  x8, mcause
  blt   x8, zero, __crt0_dummy_trap_handler_irq  // skip mepc modification if interrupt

  csrr  x8, mepc

// is compressed instruction?
__crt0_dummy_trap_handler_exc_c_check:
  lh    x9, 0(x8)   // get compressed instruction or lower 16 bits of uncompressed instruction that caused exception
  andi  x9, x9, 3   // mask: isolate lowest 2 opcode bits (= 11 for uncompressed instructions)

  addi  x8, x8, +2  // only this for compressed instructions
  csrw  mepc, x8    // set return address when compressed instruction

  addi  x8, zero, 3
  bne   x8, x9, __crt0_dummy_trap_handler_irq // jump if compressed instruction
  
// is uncompressed instruction
__crt0_dummy_trap_handler_exc_uncrompressed:
  csrr  x8, mepc
  addi  x8, x8, +2  // add another 2 (making +4) for uncompressed instructions
  csrw  mepc, x8

__crt0_dummy_trap_handler_irq:

  lw    x9, 0(sp)
  lw    x8, 4(sp)
  addi  sp, sp, +8

  mret

.cfi_endproc
.end