OpenCores
URL https://opencores.org/ocsvn/neorv32/neorv32/trunk

Subversion Repositories neorv32

[/] [neorv32/] [trunk/] [sw/] [example/] [bus_explorer/] [main.c] - Rev 69

Compare with Previous | Blame | View Log

// #################################################################################################
// # << NEORV32 - Bus Explorer - Processor Memory Space Inspector >>                               #
// # ********************************************************************************************* #
// # BSD 3-Clause License                                                                          #
// #                                                                                               #
// # Copyright (c) 2021, Stephan Nolting. All rights reserved.                                     #
// #                                                                                               #
// # Redistribution and use in source and binary forms, with or without modification, are          #
// # permitted provided that the following conditions are met:                                     #
// #                                                                                               #
// # 1. Redistributions of source code must retain the above copyright notice, this list of        #
// #    conditions and the following disclaimer.                                                   #
// #                                                                                               #
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #
// #    conditions and the following disclaimer in the documentation and/or other materials        #
// #    provided with the distribution.                                                            #
// #                                                                                               #
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #
// #    endorse or promote products derived from this software without specific prior written      #
// #    permission.                                                                                #
// #                                                                                               #
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #
// # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #
// # ********************************************************************************************* #
// # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #
// #################################################################################################
 
 
/**********************************************************************//**
 * @file bus_explorer/main.c
 * @author Stephan Nolting
 * @brief Interactive memory inspector.
 **************************************************************************/
 
#include <neorv32.h>
#include <string.h>
 
 
/**********************************************************************//**
 * @name User configuration
 **************************************************************************/
/**@{*/
/** UART BAUD rate */
#define BAUD_RATE 19200
/**@}*/
 
// Global variables
char access_size;
 
// Prototypes
void read_memory(void);
void setup_access(void);
void write_memory(void);
void atomic_cas(void);
void dump_memory(void);
uint32_t hexstr_to_uint(char *buffer, uint8_t length);
void aux_print_hex_byte(uint8_t byte);
 
 
/**********************************************************************//**
 * This program provides an interactive console to read/write memory.
 *
 * @note This program requires the UART to be synthesized.
 *
 * @return 0 if execution was successful
 **************************************************************************/
int main() {
 
  char buffer[8];
  int length = 0;
 
  access_size = 0;
 
  // check if UART unit is implemented at all
  if (neorv32_uart0_available() == 0) {
    return 1;
  }
 
 
  // capture all exceptions and give debug info via UART
  neorv32_rte_setup();
 
  // disable global interrupts
  neorv32_cpu_dint();
 
  // init UART at default baud rate, no parity bits, ho hw flow control
  neorv32_uart0_setup(BAUD_RATE, PARITY_NONE, FLOW_CONTROL_NONE);
 
  // check available hardware extensions and compare with compiler flags
  neorv32_rte_check_isa(0); // silent = 0 -> show message if isa mismatch
 
  // intro
  neorv32_uart0_printf("\n<<< NEORV32 Bus Explorer >>>\n\n");
 
  // info
  neorv32_uart0_printf("This program allows to read/write/dump memory space by hand.\n"
                       "Type 'help' to see the help menu.\n\n");
 
  // Main menu
  for (;;) {
    neorv32_uart0_printf("BUS_EXPLORER:> ");
    length = neorv32_uart0_scan(buffer, 8, 1);
    neorv32_uart0_printf("\n");
 
    if (!length) // nothing to be done
     continue;
 
    // decode input and execute command
    if (!strcmp(buffer, "help")) {
      neorv32_uart0_printf("Available commands:\n"
                          " help   - show this text\n"
                          " setup  - configure memory access width (byte,half,word)\n"
                          " read   - read from address (byte,half,word)\n"
                          " write  - write to address (byte,half,word)\n"
                          " atomic - perform atomic LR/SC access (word-only)\n"
                          " dump   - dump several bytes/halfs/words from base address\n");
    }
 
    else if (!strcmp(buffer, "setup")) {
      setup_access();
    }
 
    else if (!strcmp(buffer, "read")) {
      read_memory();
    }
 
    else if (!strcmp(buffer, "atomic")) {
      atomic_cas();
    }
 
    else if (!strcmp(buffer, "write")) {
      write_memory();
    }
 
    else if (!strcmp(buffer, "dump")) {
      dump_memory();
    }
 
    else {
      neorv32_uart0_printf("Invalid command. Type 'help' to see all commands.\n");
    }
  }
 
  return 0;
}
 
 
/**********************************************************************//**
 * Configure memory access size
 **************************************************************************/
void setup_access(void) {
 
  neorv32_uart0_printf("Select data size (press 'x' to abort):\n"
                       " 'b' - byte, 8-bit, unsigned\n"
                       " 'h' - half-word, 16-bit, unsigned\n"
                       " 'w' - word, 32-bit, unsigned\n");
 
  while(1) {
    neorv32_uart0_printf("selection: ");
    char tmp = neorv32_uart0_getc();
    neorv32_uart0_putc(tmp);
    if ((tmp == 'b') || (tmp == 'h') || (tmp == 'w')) {
      access_size = tmp;
      neorv32_uart0_printf("\n");
      return;
    }
    else if (tmp == 'x') {
      neorv32_uart0_printf("\n");
      return;
    }
    else {
      neorv32_uart0_printf("\nInvalid selection!\n");
    }
  }
}
 
 
/**********************************************************************//**
 * Read from memory address
 **************************************************************************/
void read_memory(void) {
 
  char terminal_buffer[16];
 
  if (access_size == 0) {
    neorv32_uart0_printf("Configure data size using 'setup' first.\n");
    return;
  }
 
  // enter address
  neorv32_uart0_printf("Enter address (8 hex chars): 0x");
  neorv32_uart0_scan(terminal_buffer, 8+1, 1); // 8 hex chars for address plus '\0'
  register uint32_t mem_address = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
 
  // perform read access
  neorv32_uart0_printf("\n[0x%x] => ", mem_address);
 
  neorv32_cpu_csr_write(CSR_MCAUSE, 0);
 
  uint8_t mem_data_b = 0;
  uint16_t mem_data_h = 0;
  uint32_t mem_data_w = 0;
  if (access_size == 'b') { mem_data_b = (uint32_t)neorv32_cpu_load_unsigned_byte(mem_address); }
  if (access_size == 'h') { mem_data_h = (uint32_t)neorv32_cpu_load_unsigned_half(mem_address); }
  if (access_size == 'w') { mem_data_w = (uint32_t)neorv32_cpu_load_unsigned_word(mem_address); }
 
  // show memory content if there was no exception
  if (neorv32_cpu_csr_read(CSR_MCAUSE) == 0) {
    neorv32_uart0_printf("0x");
    if (access_size == 'b') {
      aux_print_hex_byte(mem_data_b);
    }
    if (access_size == 'h') {
      aux_print_hex_byte((uint8_t)(mem_data_h >>  8));
      aux_print_hex_byte((uint8_t)(mem_data_h >>  0));
    }
    if (access_size == 'w') {
      aux_print_hex_byte((uint8_t)(mem_data_w >> 24));
      aux_print_hex_byte((uint8_t)(mem_data_w >> 16));
      aux_print_hex_byte((uint8_t)(mem_data_w >>  8));
      aux_print_hex_byte((uint8_t)(mem_data_w >>  0));
    }
  }
 
  neorv32_uart0_printf("\n");
}
 
 
/**********************************************************************//**
 * Write to memory address
 **************************************************************************/
void write_memory(void) {
 
  char terminal_buffer[16];
 
  if (access_size == 0) {
    neorv32_uart0_printf("Configure data size using 'setup' first.\n");
    return;
  }
 
  // enter address
  neorv32_uart0_printf("Enter address (8 hex chars): 0x");
  neorv32_uart0_scan(terminal_buffer, 8+1, 1); // 8 hex chars for address plus '\0'
  uint32_t mem_address = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
 
  // enter data
  uint8_t mem_data_b = 0;
  uint16_t mem_data_h = 0;
  uint32_t mem_data_w = 0;
  if (access_size == 'b') {
    neorv32_uart0_printf("\nEnter data (2 hex chars): 0x");
    neorv32_uart0_scan(terminal_buffer, 2+1, 1); // 2 hex chars for address plus '\0'
    mem_data_b = (uint8_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
    neorv32_uart0_printf("\n[0x%x] <= 0x", mem_address);
    aux_print_hex_byte(mem_data_b);
  }
  if (access_size == 'h') {
    neorv32_uart0_printf("\nEnter data (4 hex chars): 0x");
    neorv32_uart0_scan(terminal_buffer, 4+1, 1); // 4 hex chars for address plus '\0'
    mem_data_h = (uint16_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
    neorv32_uart0_printf("\n[0x%x] <= 0x", mem_address);
    aux_print_hex_byte((uint8_t)(mem_data_h >> 8));
    aux_print_hex_byte((uint8_t)(mem_data_h >> 0));
  }
  if (access_size == 'w') {
    neorv32_uart0_printf("\nEnter data (8 hex chars): 0x");
    neorv32_uart0_scan(terminal_buffer, 8+1, 1); // 8 hex chars for address plus '\0'
    mem_data_w = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
    neorv32_uart0_printf("\n[0x%x] <= 0x", mem_address);
    aux_print_hex_byte((uint8_t)(mem_data_w >> 24));
    aux_print_hex_byte((uint8_t)(mem_data_w >> 16));
    aux_print_hex_byte((uint8_t)(mem_data_w >> 8));
    aux_print_hex_byte((uint8_t)(mem_data_w >> 0));
  }
 
  // perform write access
  if (access_size == 'b') { neorv32_cpu_store_unsigned_byte(mem_address, mem_data_b); }
  if (access_size == 'h') { neorv32_cpu_store_unsigned_half(mem_address, mem_data_h); }
  if (access_size == 'w') { neorv32_cpu_store_unsigned_word(mem_address, mem_data_w); }
 
  neorv32_uart0_printf("\n");
}
 
 
/**********************************************************************//**
 * Perform atomic compare-and-swap operation, always 32-bit
 **************************************************************************/
void atomic_cas(void) {
 
  char terminal_buffer[16];
  uint32_t mem_address, rdata, wdata, status;
 
  if ((neorv32_cpu_csr_read(CSR_MISA) & (1<<CSR_MISA_A)) != 0) {
 
    // enter memory address
    neorv32_uart0_printf("Enter memory address (8 hex chars): 0x");
    neorv32_uart0_scan(terminal_buffer, 8+1, 1); // 8 hex chars for address plus '\0'
    mem_address = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
 
    // enter desired value
    neorv32_uart0_printf("\nEnter new value @0x%x (8 hex chars): 0x", mem_address);
    neorv32_uart0_scan(terminal_buffer, 8+1, 1); // 8 hex chars for address plus '\0'
    wdata = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
 
    rdata = neorv32_cpu_load_reservate_word(mem_address); // make reservation
    status = neorv32_cpu_store_conditional(mem_address, wdata);
 
    // status
    neorv32_uart0_printf("\nOld data: 0x%x\n", rdata);
    if (status == 0) {
      neorv32_uart0_printf("Atomic access successful!\n");
      neorv32_uart0_printf("New data: 0x%x\n", neorv32_cpu_load_unsigned_word(mem_address));
    }
    else {
      neorv32_uart0_printf("Atomic access failed!\n");
    }
  }
  else {
    neorv32_uart0_printf("Atomic operations not implemented/enabled!\n");
  }
}
 
 
/**********************************************************************//**
 * Read several bytes/halfs/word from memory base address
 **************************************************************************/
void dump_memory(void) {
 
  char terminal_buffer[16];
 
  if (access_size == 0) {
    neorv32_uart0_printf("Configure data size using 'setup' first.\n");
    return;
  }
 
  // enter base address
  neorv32_uart0_printf("Enter base address (8 hex chars): 0x");
  neorv32_uart0_scan(terminal_buffer, 8+1, 1); // 8 hex chars for address plus '\0'
  uint32_t mem_address = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
 
  neorv32_uart0_printf("\nPress key to start dumping. Press any key to abort.\n");
 
  neorv32_uart0_getc(); // wait for key
 
  // perform read accesses
  while(neorv32_uart0_char_received() == 0) {
 
    neorv32_uart0_printf("[0x%x] = ", mem_address);
 
    neorv32_cpu_csr_write(CSR_MCAUSE, 0);
 
    uint8_t mem_data_b = 0;
    uint16_t mem_data_h = 0;
    uint32_t mem_data_w = 0;
    if (access_size == 'b') { mem_data_b = (uint32_t)neorv32_cpu_load_unsigned_byte(mem_address); }
    if (access_size == 'h') { mem_data_h = (uint32_t)neorv32_cpu_load_unsigned_half(mem_address); }
    if (access_size == 'w') { mem_data_w = (uint32_t)neorv32_cpu_load_unsigned_word(mem_address); }
 
    // show memory content if there was no exception
    if (neorv32_cpu_csr_read(CSR_MCAUSE) == 0) {
      neorv32_uart0_printf("0x");
      if (access_size == 'b') {
        aux_print_hex_byte(mem_data_b);
      }
      if (access_size == 'h') {
        aux_print_hex_byte((uint8_t)(mem_data_h >>  8));
        aux_print_hex_byte((uint8_t)(mem_data_h >>  0));
      }
      if (access_size == 'w') {
        aux_print_hex_byte((uint8_t)(mem_data_w >> 24));
        aux_print_hex_byte((uint8_t)(mem_data_w >> 16));
        aux_print_hex_byte((uint8_t)(mem_data_w >>  8));
        aux_print_hex_byte((uint8_t)(mem_data_w >>  0));
      }
      neorv32_uart0_printf("\n");
    }
    else {
     break;
    }
 
    if (access_size == 'b') {
      mem_address += 1;
    }
    else if (access_size == 'h') {
      mem_address += 2;
    }
    else if (access_size == 'w') {
      mem_address += 4;
    }
 
  }
  neorv32_uart0_char_received_get(); // clear UART rx buffer
  neorv32_uart0_printf("\n");
}
 
 
/**********************************************************************//**
 * Helper function to convert N hex chars string into uint32_T
 *
 * @param[in,out] buffer Pointer to array of chars to convert into number.
 * @param[in,out] length Length of the conversion string.
 * @return Converted number.
 **************************************************************************/
uint32_t hexstr_to_uint(char *buffer, uint8_t length) {
 
  uint32_t res = 0, d = 0;
  char c = 0;
 
  while (length--) {
    c = *buffer++;
 
    if ((c >= '0') && (c <= '9'))
      d = (uint32_t)(c - '0');
    else if ((c >= 'a') && (c <= 'f'))
      d = (uint32_t)((c - 'a') + 10);
    else if ((c >= 'A') && (c <= 'F'))
      d = (uint32_t)((c - 'A') + 10);
    else
      d = 0;
 
    res = res + (d << (length*4));
  }
 
  return res;
}
 
 
/**********************************************************************//**
 * Print HEX byte.
 *
 * @param[in] byte Byte to be printed as 2-cahr hex value.
 **************************************************************************/
void aux_print_hex_byte(uint8_t byte) {
 
  static const char symbols[] = "0123456789abcdef";
 
  neorv32_uart0_putc(symbols[(byte >> 4) & 0x0f]);
  neorv32_uart0_putc(symbols[(byte >> 0) & 0x0f]);
}
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.