URL
https://opencores.org/ocsvn/ofdm/ofdm/trunk
Subversion Repositories ofdm
[/] [ofdm/] [branches/] [avendor/] [input.vhd] - Rev 14
Go to most recent revision | Compare with Previous | Blame | View Log
library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.STD_LOGIC_ARITH.ALL; use IEEE.STD_LOGIC_UNSIGNED.ALL; -- Uncomment the following lines to use the declarations that are -- provided for instantiating Xilinx primitive components. --library UNISIM; --use UNISIM.VComponents.all; entity input is Port ( clk : in std_logic; rst : in std_logic; serial : in std_logic; mem_block : in std_logic; mem_ready : out std_logic; wen : out std_logic; address : out std_logic_vector (5 downto 0); i : out std_logic_vector(11 downto 0); q : out std_logic_vector(11 downto 0) ); end input; architecture input of input is type state is (s0, s1, s2, s3, s4, s5, s6, s7); signal st: state; signal meta, sync : std_logic; signal addr : std_logic_vector(5 downto 0); begin process(clk,rst) --constant mais1 : std_logic_vector(11 downto 0) := "001100000000"; constant mais1 : std_logic_vector(11 downto 0) := x"080"; constant menos1 : std_logic_vector(11 downto 0) := "110100000000"; begin -- 0123.45678901 bits -- 0011.00000000 = +1 -- 1101.00000000 = -1 -- Q -- o | o -- 01 | 00 -- | -- ----------------- I -- | -- 11 | 10 -- o | o if rst = '1' then st <= s0; mem_ready <= '0'; wen <= '0'; addr <= (others => '0'); address <= (others => '0'); i <= mais1; q <= mais1; elsif clk'event and clk='1' then case st is when s0 => st <= s1; meta <= serial; wen <= '0'; when s1 => st <= s2; sync <= meta; when s2 => st <= s3; if sync='0' then i <= mais1; else i <= menos1; end if; when s3 => st <= s4; when s4 => st <= s5; meta <= serial; addr <= addr +1; when s5 => st <= s6; sync <= meta; if unsigned(addr) = 32 then addr <= conv_std_logic_vector(1,6); mem_ready <= '1'; end if; when s6 => st <= s7; mem_ready <= '0'; if sync='0' then q <= mais1; else q <= menos1; end if; when s7 => st <= s0; if mem_block = '0' then address <= addr+32; else address <= addr; end if; wen <= '1'; end case; end if; end process; end input;
Go to most recent revision | Compare with Previous | Blame | View Log