Subversion Repositories oms8051mini

irun(64): 11.10-s021: (c) Copyright 1995-2012 Cadence Design Systems, Inc.
TOOL:   irun(64)        11.10-s021: Started on Nov 27, 2016 at 19:36:28 IST
irun
        -64bit
        -R
        +access+rcw
        +DUMP
        +uart_test_1
        -l ../log/run.log

   User defined plus("+") options:
        +DUMP
        +uart_test_1

Loading snapshot worklib.tb_top:v .................... Done
ncsim> source /tools/INCISIV111/tools/inca/files/ncsimrc
ncsim> run
i : 02
i : 00
i : 08
i : 12
i : 00
i : 64
i : 80
i : fe
i : 75
i : 81
NOTE : Load memory with Initial delivery content
NOTE : Initial Load End
--> Dumpping the design
NOTE: COMMUNICATION (RE)STARTED
Config-Write: Id: 3 Addr = 0000, Cfg. Data = 00000017

... Writing char 24 ...
... Write data 24 to UART done cnt :          1 ...


... Writing char 81 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  24
... Read Data from UART done cnt :         1...
... Write data 81 to UART done cnt :          2 ...


... Writing char 09 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  81
... Read Data from UART done cnt :         2...
... Write data 09 to UART done cnt :          3 ...


... Writing char 63 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  09
... Read Data from UART done cnt :         3...
... Write data 63 to UART done cnt :          4 ...


... Writing char 0d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  63
... Read Data from UART done cnt :         4...
... Write data 0d to UART done cnt :          5 ...


... Writing char 8d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  0d
... Read Data from UART done cnt :         5...
... Write data 8d to UART done cnt :          6 ...


... Writing char 65 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  8d
... Read Data from UART done cnt :         6...
... Write data 65 to UART done cnt :          7 ...


... Writing char 12 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  65
... Read Data from UART done cnt :         7...
... Write data 12 to UART done cnt :          8 ...


... Writing char 01 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  12
... Read Data from UART done cnt :         8...
... Write data 01 to UART done cnt :          9 ...


... Writing char 0d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  01
... Read Data from UART done cnt :         9...
... Write data 0d to UART done cnt :         10 ...


... Writing char 76 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  0d
... Read Data from UART done cnt :        10...
... Write data 76 to UART done cnt :         11 ...


... Writing char 3d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  76
... Read Data from UART done cnt :        11...
... Write data 3d to UART done cnt :         12 ...


... Writing char ed ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  3d
... Read Data from UART done cnt :        12...
... Write data ed to UART done cnt :         13 ...


... Writing char 8c ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  ed
... Read Data from UART done cnt :        13...
... Write data 8c to UART done cnt :         14 ...


... Writing char f9 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  8c
... Read Data from UART done cnt :        14...
... Write data f9 to UART done cnt :         15 ...


... Writing char c6 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  f9
... Read Data from UART done cnt :        15...
... Write data c6 to UART done cnt :         16 ...


... Writing char c5 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  c6
... Read Data from UART done cnt :        16...
... Write data c5 to UART done cnt :         17 ...


... Writing char aa ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  c5
... Read Data from UART done cnt :        17...
... Write data aa to UART done cnt :         18 ...


... Writing char e5 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  aa
... Read Data from UART done cnt :        18...
... Write data e5 to UART done cnt :         19 ...


... Writing char 77 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  e5
... Read Data from UART done cnt :        19...
... Write data 77 to UART done cnt :         20 ...


... Writing char 12 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  77
... Read Data from UART done cnt :        20...
... Write data 12 to UART done cnt :         21 ...


... Writing char 8f ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  12
... Read Data from UART done cnt :        21...
... Write data 8f to UART done cnt :         22 ...


... Writing char f2 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  8f
... Read Data from UART done cnt :        22...
... Write data f2 to UART done cnt :         23 ...


... Writing char ce ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  f2
... Read Data from UART done cnt :        23...
... Write data ce to UART done cnt :         24 ...


... Writing char e8 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  ce
... Read Data from UART done cnt :        24...
... Write data e8 to UART done cnt :         25 ...


... Writing char c5 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  e8
... Read Data from UART done cnt :        25...
... Write data c5 to UART done cnt :         26 ...


... Writing char 5c ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  c5
... Read Data from UART done cnt :        26...
... Write data 5c to UART done cnt :         27 ...


... Writing char bd ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  5c
... Read Data from UART done cnt :        27...
... Write data bd to UART done cnt :         28 ...


... Writing char 2d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  bd
... Read Data from UART done cnt :        28...
... Write data 2d to UART done cnt :         29 ...


... Writing char 65 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  2d
... Read Data from UART done cnt :        29...
... Write data 65 to UART done cnt :         30 ...


... Writing char 63 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  65
... Read Data from UART done cnt :        30...
... Write data 63 to UART done cnt :         31 ...


... Writing char 0a ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  63
... Read Data from UART done cnt :        31...
... Write data 0a to UART done cnt :         32 ...


... Writing char 80 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  0a
... Read Data from UART done cnt :        32...
... Write data 80 to UART done cnt :         33 ...


... Writing char 20 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  80
... Read Data from UART done cnt :        33...
... Write data 20 to UART done cnt :         34 ...


... Writing char aa ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  20
... Read Data from UART done cnt :        34...
... Write data aa to UART done cnt :         35 ...


... Writing char 9d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  aa
... Read Data from UART done cnt :        35...
... Write data 9d to UART done cnt :         36 ...


... Writing char 96 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  9d
... Read Data from UART done cnt :        36...
... Write data 96 to UART done cnt :         37 ...


... Writing char 13 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  96
... Read Data from UART done cnt :        37...
... Write data 13 to UART done cnt :         38 ...


... Writing char 0d ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  13
... Read Data from UART done cnt :        38...
... Write data 0d to UART done cnt :         39 ...


... Writing char 53 ...
(tb_top.tb_uart.read_char_chk.loop_2) Data match  0d
... Read Data from UART done cnt :        39...
... Write data 53 to UART done cnt :         40 ...

(tb_top.tb_uart.read_char_chk.loop_2) Data match  53
... Read Data from UART done cnt :        40...
-------------------- Reporting Configuration --------------------
        Data bit number setting is : 8
        Stop bit number setting is : 1
        Divisor of Uart clock   is : 3
        Parity is enable
        Even parity setting
        FIFO mode is disable
-----------------------------------------------------------------
-------------------- Reporting Status --------------------

        Number of character received is :    40
        Number of character sent     is :    40
        Number of parity error rxd   is :     0
        Number of stop1  error rxd   is :     0
        Number of stop2  error rxd   is :     0
        Number of timeout error      is :     0
        Number of error              is :     0
-----------------------------------------------------------------

-------------------------------------------------
Test Status
warnings: 0, errors: 0

-------------------------------------------------
Test Status
warnings: 0, errors: 0

=========
Test Status: TEST PASSED
=========

Simulation complete via $finish(1) at time 157871 NS + 0
../lib/tb_glbl.v:70      #1 $finish;
ncsim> exit
TOOL:   irun(64)        11.10-s021: Exiting on Nov 27, 2016 at 19:36:38 IST  (total: 00:00:10)