Subversion Repositories open8_urisc

-- Copyright (c)2020 Jeremy Seth Henry
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions are met:
--     * Redistributions of source code must retain the above copyright
--       notice, this list of conditions and the following disclaimer.
--     * Redistributions in binary form must reproduce the above copyright
--       notice, this list of conditions and the following disclaimer in the
--       documentation and/or other materials provided with the distribution,
--       where applicable (as part of a user interface, debugging port, etc.)
--
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--
-- VHDL Units :  o8_register
-- Description:  Provides a single addressible 8-bit output register
--
-- Register Map:
-- Offset  Bitfield Description                        Read/Write
--   0x00  ---AAAAA Display 1 value                       (RW)
--   0x01  ---AAAAA Display 2 value                       (RW)
--   0x02  AAAAAAAA Display 1 brightness                  (RW)
--   0x03  AAAAAAAA Display 2 brightness                  (RW)
--
-- Revision History
-- Author          Date     Change
------------------ -------- ---------------------------------------------------
-- Seth Henry      05/08/19 Design Start
 
library ieee;
  use ieee.std_logic_1164.all;
  use ieee.std_logic_unsigned.all;
  use ieee.std_logic_arith.all;
  use ieee.std_logic_misc.all;
 
library work;
  use work.open8_pkg.all;
 
entity o8_7seg is
generic(
  Default_LED1_Value         : std_logic_vector(4 downto 0);
  Default_LED1_Bright        : DATA_TYPE := x"FF";
  Default_LED2_Value         : std_logic_vector(4 downto 0);
  Default_LED2_Bright        : DATA_TYPE := x"FF";
  Common_Cathode             : boolean   := TRUE;
  Address                    : ADDRESS_TYPE
);
port(
  Open8_Bus                  : in  OPEN8_BUS_TYPE;
  Rd_Data                    : out DATA_TYPE;
  --
  SegLED1                    : out std_logic_vector(6 downto  0);
  SegLED2                    : out std_logic_vector(6 downto  0)
);
end entity;
 
architecture behave of o8_7seg is
 
  alias Clock                is Open8_Bus.Clock;
  alias Reset                is Open8_Bus.Reset;
 
  constant User_Addr         : std_logic_vector(15 downto 2)
                               := Address(15 downto 2);
  alias  Comp_Addr           is Open8_Bus.Address(15 downto 2);
  signal Addr_Match          : std_logic;
  alias  Reg_Addr            is Open8_Bus.Address(1 downto 0);
  signal Reg_Sel             : std_logic_vector(1 downto 0);
  signal Wr_En               : std_logic;
  signal Wr_Data_q           : DATA_TYPE;
  signal Rd_En               : std_logic;
 
  signal LED1_Reg            : std_logic_vector(4 downto 0);
  signal LED1_Brt            : DATA_TYPE;
  signal LED2_Reg            : std_logic_vector(4 downto 0);
  signal LED2_Brt            : DATA_TYPE;
 
 
  signal LED1_PDM            : std_logic;
  signal LED1_Ext            : std_logic_vector(6 downto  0);
 
  signal LED2_PDM            : std_logic;
  signal LED2_Ext            : std_logic_vector(6 downto  0);
 
  signal SegLED1_Full        : std_logic_vector(6 downto  0);
  signal SegLED2_Full        : std_logic_vector(6 downto  0);
 
-- Standard 7-Segment Numeric Display
--
--    -A-
--  |     |
--  F     B
--  |     |
--    -G-
--  |     |
--  E     C
--  |     |
--    -D-  (DP)
 
  type LED_DEFS_TYPE is array(0 to 31) of std_logic_vector(6 downto 0);
  constant CHAR_DEFINITIONS  : LED_DEFS_TYPE := (
--                                GFEDCBA
                                 "0111111",  -- 00 -> 0
                                 "0000110",  -- 01 -> 1
                                 "1011011",  -- 02 -> 2
                                 "1001111",  -- 03 -> 3
                                 "1100110",  -- 04 -> 4
                                 "1101101",  -- 05 -> 5
                                 "1111101",  -- 06 -> 6
                                 "0000111",  -- 07 -> 7
                                 "1111111",  -- 08 -> 8
                                 "1101111",  -- 09 -> 9
                                 "1110111",  -- 10 -> A
                                 "1111100",  -- 11 -> B
                                 "1011000",  -- 12 -> C
                                 "1011110",  -- 13 -> D
                                 "1111001",  -- 14 -> E
                                 "1110001",  -- 15 -> F
                                 "0111101",  -- 16 -> G
                                 "1110110",  -- 17 -> H
                                 "0000100",  -- 18 -> i
                                 "0001110",  -- 19 -> J
                                 "0111000",  -- 20 -> L
                                 "1010100",  -- 21 -> n
                                 "1011100",  -- 22 -> o
                                 "1110011",  -- 23 -> P
                                 "1010000",  -- 24 -> r
                                 "0011100",  -- 25 -> u
                                 "1101110",  -- 26 -> y
                                 "1000000",  -- 27 -> -
                                 "1001000",  -- 28 -> =
                                 "1100011",  -- 29 -> DEG
                                 "0000010",  -- 30 -> '
                                 "0000000"   -- 31 -> " "
                                 );
 
begin
 
  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';
 
  io_reg: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Reg_Sel                <= "00";
      Wr_En                  <= '0';
      Wr_Data_q              <= x"00";
      LED1_Reg               <= Default_LED1_Value;
      LED2_Reg               <= Default_LED2_Value;
      LED1_Brt               <= Default_LED1_Bright;
      LED2_Brt               <= Default_LED2_Bright;
      Rd_En                  <= '0';
      Rd_Data                <= OPEN8_NULLBUS;
    elsif( rising_edge( Clock ) )then
      Reg_Sel                <= Reg_Addr;
 
      Wr_En                  <= Addr_Match and Open8_Bus.Wr_En;
      Wr_Data_q              <= Open8_Bus.Wr_Data;
      if( Wr_En = '1' )then
        case( Reg_Sel )is
          when "00" =>
            LED1_Reg         <= Wr_Data_q(4 downto 0);
          when "01" =>
            LED2_Reg         <= Wr_Data_q(4 downto 0);
          when "10" =>
            LED1_Brt         <= Wr_Data_q;
          when "11" =>
            LED2_Brt         <= Wr_Data_q;
          when others =>
            null;
        end case;
      end if;
 
      Rd_Data                <= OPEN8_NULLBUS;
      Rd_En                  <= Addr_Match and Open8_Bus.Rd_En;
      if( Rd_En = '1' )then
        case( Reg_Sel )is
          when "00" =>
            Rd_Data          <= "000" & LED1_Reg;
          when "01" =>
            Rd_Data          <= "000" & LED2_Reg;
          when "10" =>
            Rd_Data          <= LED1_Brt;
          when "11" =>
            Rd_Data          <= LED2_Brt;
          when others =>
            null;
        end case;
      end if;
    end if;
  end process;
 
  U_LED1_PWM : entity work.vdsm8
  generic map(
    Reset_Level              => Reset_Level
  )
  port map(
    Clock                    => Clock,
    Reset                    => Reset,
    DACin                    => LED1_Brt,
    DACout                   => LED1_PDM
  );
 
  U_LED2_PWM : entity work.vdsm8
  generic map(
    Reset_Level              => Reset_Level
  )
  port map(
    Clock                    => Clock,
    Reset                    => Reset,
    DACin                    => LED2_Brt,
    DACout                   => LED2_PDM
  );
 
  LED1_Ext                   <= (others => LED1_PDM);
  LED2_Ext                   <= (others => LED2_PDM);
 
  SegLED1_Full               <= CHAR_DEFINITIONS(conv_integer(LED1_Reg));
  SegLED2_Full               <= CHAR_DEFINITIONS(conv_integer(LED2_Reg));
 
Common_Cathode_Mode : if( Common_Cathode )generate
 
  LUT_proc: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      SegLED1                <= (others => '0');
      SegLED2                <= (others => '0');
    elsif( rising_edge(Clock) )then
      SegLED1                <= (SegLED1_Full and LED1_Ext) xor "1111111";
      SegLED2                <= (SegLED2_Full and LED2_Ext) xor "1111111";
    end if;
  end process;
 
end generate;
 
Common_Anode_Mode : if( not Common_Cathode )generate
 
  LUT_proc: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      SegLED1                <= (others => '1');
      SegLED2                <= (others => '1');
    elsif( rising_edge(Clock) )then
      SegLED1                <= (SegLED1_Full and LED1_Ext);
      SegLED2                <= (SegLED2_Full and LED2_Ext);
    end if;
  end process;
 
 
end generate;
 
end architecture;