OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [VHDL/] [o8_clk_detect.vhd] - Rev 178

Go to most recent revision | Compare with Previous | Blame | View Log

-- Copyright (c)2013 Jeremy Seth Henry
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions are met:
--     * Redistributions of source code must retain the above copyright
--       notice, this list of conditions and the following disclaimer.
--     * Redistributions in binary form must reproduce the above copyright
--       notice, this list of conditions and the following disclaimer in the
--       documentation and/or other materials provided with the distribution,
--       where applicable (as part of a user interface, debugging port, etc.)
--
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--
-- VHDL Units :  o8_clk_detect
-- Description:  Provides up/down status and interrupt for monitoring a clock
--
-- Register Map:
-- Offset  Bitfield Description                          Read/Write
--   0x00   BB-----A VSD Engine PLL Reset                (RO/RW)
--                    A = Interrupt Enable (1 = enabled, 0 = masked) (RW)
--                    B = Clock Line State (follows input, only valid if B = 1) (RO)
--                    C = Clock Detect (1 = transition detected) (RO)
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_misc.all;
 
library work;
  use work.open8_pkg.all;
 
entity o8_clk_detect is
generic(
  Threshold_Count       : integer;
  Address               : ADDRESS_TYPE;
  Reset_Level           : std_logic
);
port(
  Clock                 : in  std_logic;
  Reset                 : in  std_logic;
  --
  Ref_Clk_In            : in  std_logic;
  --
  Bus_Address           : in  ADDRESS_TYPE;
  Wr_Enable             : in  std_logic;
  Wr_Data               : in  DATA_TYPE;
  Rd_Enable             : in  std_logic;
  Rd_Data               : out DATA_TYPE;
  Interrupt             : out std_logic
);
end entity;
 
architecture behave of o8_clk_detect is
 
  constant User_Addr    : std_logic_vector(15 downto 0) := Address;
  alias  Comp_Addr      is Bus_Address(15 downto 0);
  signal Addr_Match     : std_logic;
 
  signal Wr_Data_Q      : DATA_TYPE;
  signal Wr_En          : std_logic;
  signal Rd_En          : std_logic;
 
  signal Int_En         : std_logic;
 
  function ceil_log2 (x : in natural) return natural is
    variable retval          : natural;
  begin
    retval                   := 1;
    while ((2**retval) - 1) < x loop
      retval                 := retval + 1;
    end loop;
    return retval;
  end function;
 
  constant Threshold_bits    : integer := ceil_log2(Threshold_Count);
  constant THRESHOLD         : std_logic_vector(Threshold_bits - 1 downto 0) :=
                        conv_std_logic_vector(Threshold_Count,Threshold_bits);
 
  signal RE_Threshold_Ctr    : std_logic_vector(Threshold_Bits - 1 downto 0);
  signal FE_Threshold_Ctr    : std_logic_vector(Threshold_Bits - 1 downto 0);
 
  signal Ref_In_SR           : std_logic_vector(3 downto 0);
  alias  Ref_In_q1           is Ref_In_SR(2);
  alias  Ref_In_q2           is Ref_In_SR(3);
  signal Ref_In_RE           : std_logic;
  signal Ref_In_FE           : std_logic;
 
  signal Ref_Detect          : std_logic;
  signal Ref_Detect_q1       : std_logic;
  signal Ref_Detect_CoS      : std_logic;
 
begin
 
  Addr_Match            <= '1' when Comp_Addr = User_Addr else '0';
 
  io_reg: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Wr_Data_Q         <= x"00";
      Wr_En             <= '0';
      Rd_En             <= '0';
      Rd_Data           <= x"00";
      Int_En            <= '0';
    elsif( rising_edge( Clock ) )then
      Wr_Data_Q         <= Wr_Data;
      Wr_En             <= Wr_Enable and Addr_Match;
      Rd_En             <= Rd_Enable and Addr_Match;
 
    if( Wr_En = '1' )then
      Int_En          <= Wr_Data_Q(0);
    end if;
 
      Rd_Data           <= (others => '0');
      if( Rd_En = '1' )then
        Rd_Data(0)      <= Int_En;
        Rd_Data(6)      <= Ref_In_q2;
        Rd_Data(7)      <= Ref_Detect;
      end if;
 
    end if;
  end process;
 
  Detect_proc: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Ref_In_SR              <= (others => '0');
      Ref_In_RE              <= '0';
      Ref_In_FE              <= '0';
      RE_Threshold_Ctr       <= (others => '0');
      FE_Threshold_Ctr       <= (others => '0');
      Ref_Detect             <= '0';
      Interrupt              <= '0';
    elsif( rising_edge(Clock) )then
      Ref_In_SR              <= Ref_In_SR(2 downto 0) & Ref_Clk_In;
      Ref_In_RE              <= Ref_In_q1 and (not Ref_In_q2);
      Ref_In_FE              <= (not Ref_In_q1) and Ref_In_q2;
 
      RE_Threshold_Ctr       <= RE_Threshold_Ctr - 1;
      if( Ref_In_RE = '1' )then
        RE_Threshold_Ctr     <= THRESHOLD;
      elsif( or_reduce(RE_Threshold_Ctr) = '0' )then
        RE_Threshold_Ctr     <= (others => '0');
      end if;
 
      FE_Threshold_Ctr       <= FE_Threshold_Ctr - 1;
      if( Ref_In_FE = '1' )then
        FE_Threshold_Ctr     <= THRESHOLD;
      elsif( or_reduce(FE_Threshold_Ctr) = '0' )then
        FE_Threshold_Ctr     <= (others => '0');
      end if;
 
 
      Ref_Detect             <= or_reduce(RE_Threshold_Ctr) and
                                or_reduce(FE_Threshold_Ctr);
      Ref_Detect_q1          <= Ref_Detect;
      Ref_Detect_CoS         <= Ref_Detect xor Ref_Detect_q1;
 
      Interrupt              <= Ref_Detect_CoS and Int_En;
    end if;
  end process;
 
end architecture;

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.