URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [VHDL/] [o8_gpio.vhd] - Rev 219
Go to most recent revision | Compare with Previous | Blame | View Log
-- Copyright (c)2013, 2020 Jeremy Seth Henry -- All rights reserved. -- -- Redistribution and use in source and binary forms, with or without -- modification, are permitted provided that the following conditions are met: -- * Redistributions of source code must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- * Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution, -- where applicable (as part of a user interface, debugging port, etc.) -- -- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY -- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY -- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- -- VHDL Units : o8_gpio -- Description: Provides a single 8-bit GPIO register -- -- Register Map: -- Offset Bitfield Description Read/Write -- 0x00 AAAAAAAA Output Register (RW) -- 0x01 AAAAAAAA Direction Register (RW) -- 0x03 AAAAAAAA Input Register (RO) -- -- Revision History -- Author Date Change ------------------ -------- --------------------------------------------------- -- Seth Henry 12/20/13 Design Start -- Seth Henry 04/10/20 Code cleanup and register documentation -- Also removed "input only" generic, as there is a -- separate module for that library ieee; use ieee.std_logic_1164.all; library work; use work.open8_pkg.all; entity o8_gpio is generic( Default_Out : DATA_TYPE := x"00"; Default_En : DATA_TYPE := x"00"; Reset_Level : std_logic := '1'; Address : ADDRESS_TYPE ); port( Clock : in std_logic; Reset : in std_logic; -- Bus_Address : in ADDRESS_TYPE; Wr_Enable : in std_logic; Wr_Data : in DATA_TYPE; Rd_Enable : in std_logic; Rd_Data : out DATA_TYPE; -- GPIO : inout DATA_TYPE ); end entity; architecture behave of o8_gpio is constant User_Addr : std_logic_vector(15 downto 2) := Address(15 downto 2); alias Comp_Addr is Bus_Address(15 downto 2); alias Reg_Addr is Bus_Address(1 downto 0); signal Reg_Sel : std_logic_vector(1 downto 0); signal Addr_Match : std_logic; signal Wr_En : std_logic; signal Wr_Data_q : DATA_TYPE; signal Rd_En : std_logic; signal User_Out : DATA_TYPE; signal User_En : DATA_TYPE; signal User_In : DATA_TYPE; begin Addr_Match <= '1' when Comp_Addr = User_Addr else '0'; io_reg: process( Clock, Reset ) begin if( Reset = Reset_Level )then Reg_Sel <= "00"; Rd_En <= '0'; Rd_Data <= OPEN8_NULLBUS; Wr_En <= '0'; Wr_Data_q <= x"00"; User_Out <= Default_Out; User_En <= Default_En; elsif( rising_edge( Clock ) )then Reg_Sel <= Reg_Addr; Wr_En <= Addr_Match and Wr_Enable; Wr_Data_q <= Wr_Data; if( Wr_En = '1' )then case( Reg_Sel )is when "00" => User_Out <= Wr_Data_q; when "01" => User_En <= Wr_Data_q; when others => null; end case; end if; User_In <= GPIO; Rd_Data <= OPEN8_NULLBUS; Rd_En <= Addr_Match and Rd_Enable; if( Rd_En = '1' )then Rd_Data <= User_In; case( Reg_Sel )is when "00" => Rd_Data <= User_Out; when "01" => Rd_Data <= User_En; when "10" => Rd_Data <= User_In; when others => null; end case; end if; end if; end process; Output_Ctl_proc: process( User_Out, User_En ) begin for i in 0 to 7 loop GPIO(i) <= 'Z'; if( User_En(i) = '1' )then GPIO(i) <= User_Out(i); end if; end loop; end process; end architecture;
Go to most recent revision | Compare with Previous | Blame | View Log