OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [VHDL/] [o8_interval_meas.vhd] - Rev 279

Go to most recent revision | Compare with Previous | Blame | View Log

-- Copyright (c)2020 Jeremy Seth Henry
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions are met:
--     * Redistributions of source code must retain the above copyright
--       notice, this list of conditions and the following disclaimer.
--     * Redistributions in binary form must reproduce the above copyright
--       notice, this list of conditions and the following disclaimer in the
--       documentation and/or other materials provided with the distribution,
--       where applicable (as part of a user interface, debugging port, etc.)
--
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--
-- VHDL Units :  o8_interval_meas
-- Description:  Provides an settable resolution counter for measuring
--            :   events
-- Register Map:
-- Offset  Bitfield Description                        Read/Write
--   0x00  AAAAAAAA Captured Interval Byte 0              (RW*)
--   0x01  AAAAAAAA Captured Interval Byte 1              (RW*)
--
-- Notes      :  Writing to either register will clear the timer
--
-- Revision History
-- Author          Date     Change
------------------ -------- ---------------------------------------------------
-- Seth Henry      06/11/20 Design Start
 
library ieee;
use ieee.std_logic_1164.all;
  use ieee.std_logic_unsigned.all;
  use ieee.std_logic_arith.all;
  use ieee.std_logic_misc.all;
 
library work;
  use work.open8_pkg.all;
 
entity o8_interval_meas is
generic(
  Clock_Divide               : integer := 12;
  Address                    : ADDRESS_TYPE
);
port(
  Open8_Bus                  : in  OPEN8_BUS_TYPE;
  Write_Qual                 : in  std_logic := '1';
  Rd_Data                    : out DATA_TYPE;
  Interrupt                  : out std_logic;
  Trigger_Reset              : in  std_logic := '0';
  Trigger_Capture            : in  std_logic
);
end entity;
 
architecture behave of o8_interval_meas is
 
  alias Clock                is Open8_Bus.Clock;
  alias Reset                is Open8_Bus.Reset;
 
  constant User_Addr         : std_logic_vector(15 downto 1) :=
                                Address(15 downto 1);
  alias  Comp_Addr           is Open8_Bus.Address(15 downto 1);
  signal Addr_Match          : std_logic := '0';
 
  alias  Reg_Sel_d           is Open8_Bus.Address(0);
  signal Reg_Sel_q           : std_logic := '0';
  signal Wr_En_d             : std_logic := '0';
  signal Wr_En_q             : std_logic := '0';
  signal Rd_En_d             : std_logic := '0';
  signal Rd_En_q             : std_logic := '0';
 
  signal Trig_Reset_SR       : std_logic_vector(2 downto 0);
  signal Trig_Reset_RE       : std_logic;
  signal Trig_Capture_SR     : std_logic_vector(2 downto 0);
  signal Trig_Capture_RE     : std_logic;
 
  constant DLY_VAL           : integer := Clock_Divide;
  constant DLY_WDT           : integer := ceil_log2(DLY_VAL - 1);
  constant DLY_INTV          : std_logic_vector :=
                                conv_std_logic_vector( DLY_VAL - 1, DLY_WDT);
  signal Intv_Cntr           : std_logic_vector( DLY_WDT - 1 downto 0 );
  signal Intv_Tick           : std_logic := '0';
 
  signal Timer_Latch         : std_logic_vector(15 downto 0) := x"0000";
  alias  Timer_Latch_B0      is Timer_Latch(7 downto 0);
  alias  Timer_Latch_B1      is Timer_Latch(15 downto 8);
 
  signal Timer_Counter       : std_logic_vector(15 downto 0) := x"0000";
begin
 
  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';
  Wr_En_d                    <= Addr_Match and Open8_Bus.Wr_En;
  Rd_En_d                    <= Addr_Match and Open8_Bus.Rd_En;
 
  io_reg: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Reg_Sel_q              <= '0';
      Wr_En_q                <= '0';
      Rd_En_q                <= '0';
      Rd_Data                <= OPEN8_NULLBUS;
      Interrupt              <= '0';
    elsif( rising_edge( Clock ) )then
      Reg_Sel_q              <= Reg_Sel_d;
 
      Wr_En_q                <= Wr_En_d and Write_Qual;
 
      Rd_Data                <= OPEN8_NULLBUS;
      Rd_En_q                <= Rd_En_d;
 
      if( Rd_En_q = '1' and Reg_Sel_q = '0' )then
        Rd_Data              <= Timer_Latch_B0;
      end if;
 
      if( Rd_En_q = '1' and Reg_Sel_q = '1' )then
        Rd_Data              <= Timer_Latch_B1;
      end if;
 
      Interrupt              <= Trig_Capture_RE;
 
    end if;
  end process;
 
  Capture_proc: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Trig_Reset_SR          <= (others => '0');
      Trig_Reset_RE          <= '0';
      Trig_Capture_SR        <= (others => '0');
      Trig_Capture_RE        <= '0';
      Intv_Cntr              <= (others => '0');
      Intv_Tick              <= '0';
      Timer_Counter          <= (others => '0');
      Timer_Latch            <= (others => '0');
    elsif( rising_edge(Clock) )then
      Trig_Reset_SR          <= Trig_Reset_SR(1 downto 0) & Trigger_Reset;
      Trig_Reset_RE          <= Trig_Reset_SR(1) and not Trig_Reset_SR(2);
      Trig_Capture_SR        <= Trig_Capture_SR(1 downto 0) & Trigger_Capture;
      Trig_Capture_RE        <= Trig_Capture_SR(1) and not Trig_Capture_SR(2);
 
      Intv_Cntr              <= Intv_Cntr - 1;
      Intv_Tick              <= '0';
      if( Intv_Cntr = 0 )then
        Intv_Cntr            <= DLY_INTV;
        Intv_Tick            <= '1';
      end if;
 
      Timer_Counter          <= Timer_Counter + Intv_Tick;
      if( Trig_Reset_RE = '1' or Wr_En_q = '1' )then
        Timer_Counter        <= (others => '0');
      elsif( and_reduce(Timer_Counter) = '1' )then
        Timer_Counter        <= Timer_Counter;
      end if;
 
      if( Wr_En_q = '1' )then
        Timer_Latch          <= (others => '0');
      elsif( Trig_Capture_RE = '1' )then
        Timer_Latch          <= Timer_Counter;
      end if;
 
    end if;
  end process;
 
end architecture;

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.