OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [VHDL/] [o8_pwm_adc.vhd] - Rev 252

Go to most recent revision | Compare with Previous | Blame | View Log

-- Copyright (c)2020 Jeremy Seth Henry
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions are met:
--     * Redistributions of source code must retain the above copyright
--       notice, this list of conditions and the following disclaimer.
--     * Redistributions in binary form must reproduce the above copyright
--       notice, this list of conditions and the following disclaimer in the
--       documentation and/or other materials provided with the distribution,
--       where applicable (as part of a user interface, debugging port, etc.)
--
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--
-- VHDL Entity: pwm_adc
-- Description: Integrates a PWM input to return the approximate duty cycle
--              Uses a 1kB block ram as storage for a rolling integrator that
--               acts as a simple successive-approximation ADC.
--
-- Revision History
-- Author          Date     Change
------------------ -------- ---------------------------------------------------
-- Seth Henry      05/07/20 Design Start
 
library ieee;
  use ieee.std_logic_1164.all;
  use ieee.std_logic_unsigned.all;
 
library work;
  use work.open8_pkg.all;
 
entity o8_pwm_adc is
generic(
  Address                    : ADDRESS_TYPE
);
port(
  Open8_Bus                  : in  OPEN8_BUS_TYPE;
  Rd_Data                    : out DATA_TYPE;
  --
  PWM_In                     : in  std_logic
);
end entity;
 
architecture behave of o8_pwm_adc is
 
  alias Clock                is Open8_Bus.Clock;
  alias Reset                is Open8_Bus.Reset;
  alias uSec_Tick            is Open8_Bus.uSec_Tick;
 
  constant User_Addr         : std_logic_vector(15 downto 0) := Address(15 downto 0);
  alias  Comp_Addr           is Open8_Bus.Address(15 downto 0);
 
  signal Addr_Match          : std_logic := '0';
  signal Rd_En_d             : std_logic := '0';
  signal Rd_En_q             : std_logic := '0';
 
  signal Sample              : DATA_TYPE := x"00";
  signal RAM_Addr            : std_logic_vector(9 downto 0) := (others => '0');
  signal RAM_Data            : DATA_TYPE := x"00";
  signal Accumulator         : std_logic_vector(17 downto 0) := (others => '0');
  signal Average             : DATA_TYPE := x"00";
begin
 
  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';
  Rd_En_d                    <= Addr_Match and Open8_Bus.Rd_En;
 
  io_reg: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Rd_En_q                <= '0';
      Rd_Data                <= OPEN8_NULLBUS;
 
    elsif( rising_edge( Clock ) )then
 
      Rd_En_q                <= Rd_En_d;
      Rd_Data                <= OPEN8_NULLBUS;
      if( Rd_En_q = '1' )then
        Rd_Data              <= Average;
      end if;
    end if;
  end process;
 
  -- PWM input is binary, so the sample swings between 0x00 and 0xFF
  Sample                     <= (others => PWM_In);
 
  U_DP : entity work.o8_pwm_adc_ram
  port map(
		address                  => RAM_Addr,
		clock                    => Clock,
		data                     => Sample,
		wren                     => '1',
		q                        => RAM_Data
	);
 
  ADC_proc: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      RAM_Addr               <= (others => '0');
      Accumulator            <= (others => '0');
      Average                <= (others => '0');
    elsif( rising_edge(Clock) )then
      RAM_Addr               <= RAM_Addr + 1;
      Accumulator            <= Accumulator + ("0000000000" & RAM_Data);
      if( RAM_Addr = 0 )then
        Accumulator          <= (others => '0');
        Average              <= Accumulator(17 downto 10);
      end if;
    end if;
  end process;
 
end architecture;

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.