OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [VHDL/] [o8_spi_16b_tx.vhd] - Rev 303

Go to most recent revision | Compare with Previous | Blame | View Log

-- Copyright (c) 2020 Jeremy Seth Henry
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions are met:
--     * Redistributions of source code must retain the above copyright
--       notice, this list of conditions and the following disclaimer.
--     * Redistributions in binary form must reproduce the above copyright
--       notice, this list of conditions and the following disclaimer in the
--       documentation and/or other materials provided with the distribution,
--       where applicable (as part of a user interface, debugging port, etc.)
--
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--
-- VHDL units : o8_spi_16b_tx
-- Description: Transmits (only) a 16-bit word using a synchronous interface
--              Clock_Polarity sets the clock state at idle
--              Clock_Phase sets the clock edge data is shifted on
--              Half_Period_Clks sets the number of CPU clocks used to generate
--               a half-period tick that runs the transmit state machine.
--              (Note that 2x this value is the full SPI period in CPU clocks)
--
-- Register Map:
-- Offset  Bitfield Description                        Read/Write
--   0x0   AAAAAAAA Pending Word (7:0)                 (R/W)
--   0x1   AAAAAAAA Pending Word (11:8)                (R/W)
--   0x2   A------- Busy Flag / TX on Write            (R/W)
--
-- Revision History
-- Author          Date     Change
------------------ -------- ---------------------------------------------------
-- Seth Henry      09/16/20 Initial version
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_misc.all;
 
library work;
  use work.open8_pkg.all;
 
entity o8_spi_16b_tx is
generic(
  Clock_Polarity             : std_logic;
  Clock_Phase                : std_logic;
  Half_Period_Clks           : integer range 1 to integer'high;
  Address                    : ADDRESS_TYPE
);
port(
  Open8_Bus                  : in  OPEN8_BUS_TYPE;
  Write_Qual                 : in  std_logic;
  Rd_Data                    : out DATA_TYPE;
  -- SPI
  DOUT                       : out std_logic;
  SCLK                       : out std_logic;
  SYNC                       : out std_logic
);
end entity;
 
architecture behave of o8_spi_16b_tx is
 
  alias Clock                is Open8_Bus.Clock;
  alias Reset                is Open8_Bus.Reset;
  alias uSec_Tick            is Open8_Bus.uSec_Tick;
 
  constant Clk_Div_i         : integer := Half_Period_Clks - 1;
  constant Clk_Div_Bits      : integer := ceil_log2(Clk_Div_i);
  constant CLK_DIV_VAL       : std_logic_vector(Clk_Div_Bits - 1 downto 0) :=
                                conv_std_logic_vector(Clk_Div_i,Clk_Div_Bits);
  signal HT_Cntr             : std_logic_vector(Clk_Div_Bits - 1 downto 0);
  signal HT_Tick             : std_logic := '0';
 
  constant User_Addr         : std_logic_vector(15 downto 2) := Address(15 downto 2);
  alias  Comp_Addr           is Open8_Bus.Address(15 downto 2);
  signal Addr_Match          : std_logic;
  alias  Reg_Sel_d           is Open8_Bus.Address(1 downto 0);
  signal Reg_Sel_q           : std_logic_vector(1 downto 0);
  signal Wr_En_d             : std_logic := '0';
  signal Wr_En_q             : std_logic := '0';
  alias  Wr_Data_d           is Open8_Bus.Wr_Data;
  signal Wr_Data_q           : DATA_TYPE := x"00";
  signal Rd_En_d             : std_logic := '0';
  signal Rd_En_q             : std_logic := '0';
 
  signal spi_xmit            : std_logic := '0';
 
  type SPI_STATES is ( IDLE, ALIGN, SYNC_START, CLK_SETUP, CLK_HOLD, CLK_END, SYNC_END );
  signal spi_state           : SPI_STATES;
 
  signal spi_buffer          : std_logic_vector(15 downto 0) := x"0000";
  alias  spi_buffer_lb       is spi_buffer(7 downto 0);
  alias  spi_buffer_ub       is spi_buffer(15 downto 8);
  signal bit_cntr            : std_logic_vector(3 downto 0) := x"0";
  signal spi_busy            : std_logic := '0';
 
begin
 
  Addr_Match                 <= '1' when Comp_Addr = User_Addr else '0';
  Wr_En_d                    <= Addr_Match and Open8_Bus.Wr_En;
  Rd_En_d                    <= Addr_Match and Open8_Bus.Rd_En;
 
  io_reg: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      Reg_Sel_q              <= "00";
      Wr_En_q                <= '0';
      Wr_Data_q              <= x"00";
      Rd_En_q                <= '0';
      Rd_Data                <= OPEN8_NULLBUS;
 
      spi_buffer             <= (others => '0');
      spi_xmit               <= '0';
 
    elsif( rising_edge( Clock ) )then
      Reg_Sel_q              <= Reg_Sel_d;
 
      Wr_En_q                <= Wr_En_d;
      Wr_Data_q              <= Wr_Data_d;
 
      spi_xmit               <= '0';
      if( Wr_En_q = '1' and Write_Qual = '1' )then
        case( Reg_Sel_q )is
          when "00" =>
            spi_buffer_lb    <= Wr_Data_q;
          when "01" =>
            spi_buffer_ub    <= Wr_Data_q;
          when "10" | "11" =>
            spi_xmit         <= '1';
          when others =>
            null;
        end case;
      end if;
 
      Rd_En_q                <= Rd_En_d;
      Rd_Data                <= OPEN8_NULLBUS;
      if( Rd_En_q = '1' )then
        case( Reg_Sel_q )is
          when "00" =>
            Rd_Data          <= spi_buffer_lb;
          when "01" =>
            Rd_Data          <= spi_buffer_ub;
          when "10" | "11" =>
            Rd_Data          <= spi_busy & "0000000";
          when others =>
            null;
        end case;
      end if;
    end if;
  end process;
 
  ADC_IO_FSM: process( Clock, Reset )
  begin
    if( Reset = Reset_Level )then
      spi_state              <= IDLE;
      bit_cntr               <= (others => '0');
      spi_busy               <= '0';
 
      HT_Cntr                <= (others => '0');
      HT_Tick                <= '0';
 
      DOUT                   <= '0';
      SCLK                   <= '0';
      SYNC                   <= '1';
    elsif( rising_edge(Clock) )then
 
      HT_Cntr                <= HT_Cntr - 1;
      HT_Tick                <= '0';
      if( HT_Cntr = 0 )then
        HT_Cntr              <= CLK_DIV_VAL;
        HT_Tick              <= '1';
      end if;
 
      case( spi_state )is
        when IDLE =>
          DOUT               <= '0';
          SCLK               <= Clock_Polarity;
          SYNC               <= '1';
          bit_cntr           <= x"F";
          spi_busy           <= '0';
          if( spi_xmit = '1' )then
            spi_busy         <= '1';
            spi_state        <= ALIGN;
          end if;
 
        when ALIGN =>
          if( HT_Tick = '1' )then
            spi_state        <= CLK_SETUP;
            if( Clock_Phase = '1' )then
              spi_state      <= SYNC_START;
            end if;
          end if;
 
        when SYNC_START =>
          SYNC               <= '0';
          if( HT_Tick = '1' )then
            spi_state        <= CLK_SETUP;
          end if;
 
        when CLK_SETUP =>
          SCLK               <= Clock_Polarity xor Clock_Phase;
          DOUT               <= spi_buffer(conv_integer(bit_cntr));
          SYNC               <= '0';
          if( HT_Tick = '1' )then
            spi_state        <= CLK_HOLD;
          end if;
 
        when CLK_HOLD =>
          SCLK               <= (not Clock_Polarity) xor Clock_Phase;
          DOUT               <= spi_buffer(conv_integer(bit_cntr));
          if( HT_Tick = '1' )then
            bit_cntr         <= bit_cntr - 1;
            spi_state        <= CLK_SETUP;
            if( bit_cntr = 0 )then
              spi_state      <= CLK_END;
            end if;
          end if;
 
        when CLK_END =>
          SCLK               <= Clock_Polarity;
          if( Clock_Phase = '1' )then
            SYNC             <= '1';
          end if;
          if( HT_Tick = '1' )then
            spi_state        <= SYNC_END;
            if( Clock_Phase = '1' )then
              spi_state      <= IDLE;
            end if;
          end if;
 
        when SYNC_END =>
          SYNC               <= '1';
          if( HT_Tick = '1' )then
            spi_state        <= IDLE;
          end if;
 
        when others =>
          null;
      end case;
 
    end if;
  end process;
 
end architecture;

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.