URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [VHDL/] [status_led.vhd] - Rev 250
Go to most recent revision | Compare with Previous | Blame | View Log
-- Copyright (c)2020 Jeremy Seth Henry -- All rights reserved. -- -- Redistribution and use in source and binary forms, with or without -- modification, are permitted provided that the following conditions are met: -- * Redistributions of source code must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- * Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution, -- where applicable (as part of a user interface, debugging port, etc.) -- -- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY -- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY -- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- -- VHDL Units : status_led -- Description: Provides a multi-state status LED controller -- -- LED Modes: -- 0x00 - LED is fully off -- 0x01 - LED is fully on -- 0x02 - LED is dimmed to 50% -- 0x03 - LED Toggles at 1Hz -- 0x04 - LED fades in and out -- -- Revision History -- Author Date Change ------------------ -------- --------------------------------------------------- -- Seth Henry 05/24/20 Created as a separate sub-component library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; use ieee.std_logic_arith.all; use ieee.std_logic_misc.all; entity status_led is generic( Reset_Level : std_logic ); port( Clock : in std_logic; Reset : in std_logic; LED_Mode : in std_logic_vector(2 downto 0); LED_Out : out std_logic ); end entity; architecture behave of status_led is signal Dim50Pct_Out : std_logic; signal Half_Hz_Timer : std_logic_vector(15 downto 0); constant HALF_HZ_PRD : std_logic_vector(15 downto 0) := conv_std_logic_vector(500000,16); signal One_Hz_Out : std_logic; constant TIMER_MSB : integer range 9 to 20 := 18; signal Fade_Timer1 : std_logic_vector(TIMER_MSB downto 0); signal Fade_Timer2 : std_logic_vector(TIMER_MSB downto 0); signal Fade_Out : std_logic; begin Output_FF: process( Clock, Reset ) begin if( Reset = Reset_Level )then LED_Out <= '0'; elsif( rising_edge(Clock) )then LED_Out <= '0'; case( LED_Mode )is when "001" => LED_Out <= '1'; when "010" => LED_Out <= Dim50Pct_Out; when "011" => LED_Out <= One_Hz_Out; when "100" => LED_Out <= Fade_out; when others => null; end case; end if; end process; Timer_proc: process( Clock, Reset ) begin if( Reset = Reset_Level )then Dim50Pct_Out <= '0'; Half_Hz_Timer <= (others => '0'); One_Hz_Out <= '0'; Fade_Timer1 <= (others => '0'); Fade_Timer2 <= (others => '0'); Fade_out <= '0'; elsif( rising_edge(Clock) )then Dim50Pct_Out <= not Dim50Pct_Out; Half_Hz_Timer <= Half_Hz_Timer - 1; if( Half_Hz_Timer = 0 )then Half_Hz_Timer <= HALF_HZ_PRD; One_Hz_Out <= not One_Hz_Out; end if; Fade_Timer1 <= Fade_Timer1 - 1; Fade_Timer2 <= Fade_Timer2 - 1; if( or_reduce(Fade_Timer2) = '0' )then Fade_Timer2(TIMER_MSB downto TIMER_MSB - 8) <= (others => '1'); Fade_Timer2(TIMER_MSB - 9 downto 0 ) <= (others => '0'); end if; Fade_out <= Fade_Timer1(TIMER_MSB) xor Fade_Timer2(TIMER_MSB); end if; end process; end architecture;
Go to most recent revision | Compare with Previous | Blame | View Log