URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [bfd/] [dwarf2.c] - Rev 50
Go to most recent revision | Compare with Previous | Blame | View Log
/* DWARF 2 support. Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. Adapted from gdb/dwarf2read.c by Gavin Koch of Cygnus Solutions (gavin@cygnus.com). From the dwarf2read.c header: Adapted by Gary Funck (gary@intrepid.com), Intrepid Technology, Inc. with support from Florida State University (under contract with the Ada Joint Program Office), and Silicon Graphics, Inc. Initial contribution by Brent Benson, Harris Computer Systems, Inc., based on Fred Fish's (Cygnus Support) implementation of DWARF 1 support in dwarfread.c This file is part of BFD. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #include "sysdep.h" #include "bfd.h" #include "libiberty.h" #include "libbfd.h" #include "elf-bfd.h" #include "dwarf2.h" /* The data in the .debug_line statement prologue looks like this. */ struct line_head { bfd_vma total_length; unsigned short version; bfd_vma prologue_length; unsigned char minimum_instruction_length; unsigned char maximum_ops_per_insn; unsigned char default_is_stmt; int line_base; unsigned char line_range; unsigned char opcode_base; unsigned char *standard_opcode_lengths; }; /* Attributes have a name and a value. */ struct attribute { enum dwarf_attribute name; enum dwarf_form form; union { char *str; struct dwarf_block *blk; bfd_uint64_t val; bfd_int64_t sval; } u; }; /* Blocks are a bunch of untyped bytes. */ struct dwarf_block { unsigned int size; bfd_byte *data; }; struct adjusted_section { asection *section; bfd_vma adj_vma; }; struct dwarf2_debug { /* A list of all previously read comp_units. */ struct comp_unit *all_comp_units; /* Last comp unit in list above. */ struct comp_unit *last_comp_unit; /* The next unread compilation unit within the .debug_info section. Zero indicates that the .debug_info section has not been loaded into a buffer yet. */ bfd_byte *info_ptr; /* Pointer to the end of the .debug_info section memory buffer. */ bfd_byte *info_ptr_end; /* Pointer to the bfd, section and address of the beginning of the section. The bfd might be different than expected because of gnu_debuglink sections. */ bfd *bfd_ptr; asection *sec; bfd_byte *sec_info_ptr; /* A pointer to the memory block allocated for info_ptr. Neither info_ptr nor sec_info_ptr are guaranteed to stay pointing to the beginning of the malloc block. This is used only to free the memory later. */ bfd_byte *info_ptr_memory; /* Pointer to the symbol table. */ asymbol **syms; /* Pointer to the .debug_abbrev section loaded into memory. */ bfd_byte *dwarf_abbrev_buffer; /* Length of the loaded .debug_abbrev section. */ bfd_size_type dwarf_abbrev_size; /* Buffer for decode_line_info. */ bfd_byte *dwarf_line_buffer; /* Length of the loaded .debug_line section. */ bfd_size_type dwarf_line_size; /* Pointer to the .debug_str section loaded into memory. */ bfd_byte *dwarf_str_buffer; /* Length of the loaded .debug_str section. */ bfd_size_type dwarf_str_size; /* Pointer to the .debug_ranges section loaded into memory. */ bfd_byte *dwarf_ranges_buffer; /* Length of the loaded .debug_ranges section. */ bfd_size_type dwarf_ranges_size; /* If the most recent call to bfd_find_nearest_line was given an address in an inlined function, preserve a pointer into the calling chain for subsequent calls to bfd_find_inliner_info to use. */ struct funcinfo *inliner_chain; /* Number of sections whose VMA we must adjust. */ unsigned int adjusted_section_count; /* Array of sections with adjusted VMA. */ struct adjusted_section *adjusted_sections; /* Number of times find_line is called. This is used in the heuristic for enabling the info hash tables. */ int info_hash_count; #define STASH_INFO_HASH_TRIGGER 100 /* Hash table mapping symbol names to function infos. */ struct info_hash_table *funcinfo_hash_table; /* Hash table mapping symbol names to variable infos. */ struct info_hash_table *varinfo_hash_table; /* Head of comp_unit list in the last hash table update. */ struct comp_unit *hash_units_head; /* Status of info hash. */ int info_hash_status; #define STASH_INFO_HASH_OFF 0 #define STASH_INFO_HASH_ON 1 #define STASH_INFO_HASH_DISABLED 2 }; struct arange { struct arange *next; bfd_vma low; bfd_vma high; }; /* A minimal decoding of DWARF2 compilation units. We only decode what's needed to get to the line number information. */ struct comp_unit { /* Chain the previously read compilation units. */ struct comp_unit *next_unit; /* Likewise, chain the compilation unit read after this one. The comp units are stored in reversed reading order. */ struct comp_unit *prev_unit; /* Keep the bfd convenient (for memory allocation). */ bfd *abfd; /* The lowest and highest addresses contained in this compilation unit as specified in the compilation unit header. */ struct arange arange; /* The DW_AT_name attribute (for error messages). */ char *name; /* The abbrev hash table. */ struct abbrev_info **abbrevs; /* Note that an error was found by comp_unit_find_nearest_line. */ int error; /* The DW_AT_comp_dir attribute. */ char *comp_dir; /* TRUE if there is a line number table associated with this comp. unit. */ int stmtlist; /* Pointer to the current comp_unit so that we can find a given entry by its reference. */ bfd_byte *info_ptr_unit; /* Pointer to the start of the debug section, for DW_FORM_ref_addr. */ bfd_byte *sec_info_ptr; /* The offset into .debug_line of the line number table. */ unsigned long line_offset; /* Pointer to the first child die for the comp unit. */ bfd_byte *first_child_die_ptr; /* The end of the comp unit. */ bfd_byte *end_ptr; /* The decoded line number, NULL if not yet decoded. */ struct line_info_table *line_table; /* A list of the functions found in this comp. unit. */ struct funcinfo *function_table; /* A list of the variables found in this comp. unit. */ struct varinfo *variable_table; /* Pointer to dwarf2_debug structure. */ struct dwarf2_debug *stash; /* DWARF format version for this unit - from unit header. */ int version; /* Address size for this unit - from unit header. */ unsigned char addr_size; /* Offset size for this unit - from unit header. */ unsigned char offset_size; /* Base address for this unit - from DW_AT_low_pc attribute of DW_TAG_compile_unit DIE */ bfd_vma base_address; /* TRUE if symbols are cached in hash table for faster lookup by name. */ bfd_boolean cached; }; /* This data structure holds the information of an abbrev. */ struct abbrev_info { unsigned int number; /* Number identifying abbrev. */ enum dwarf_tag tag; /* DWARF tag. */ int has_children; /* Boolean. */ unsigned int num_attrs; /* Number of attributes. */ struct attr_abbrev *attrs; /* An array of attribute descriptions. */ struct abbrev_info *next; /* Next in chain. */ }; struct attr_abbrev { enum dwarf_attribute name; enum dwarf_form form; }; /* Map of uncompressed DWARF debug section name to compressed one. It is terminated by NULL uncompressed_name. */ const struct dwarf_debug_section dwarf_debug_sections[] = { { ".debug_abbrev", ".zdebug_abbrev" }, { ".debug_aranges", ".zdebug_aranges" }, { ".debug_frame", ".zdebug_frame" }, { ".debug_info", ".zdebug_info" }, { ".debug_line", ".zdebug_line" }, { ".debug_loc", ".zdebug_loc" }, { ".debug_macinfo", ".zdebug_macinfo" }, { ".debug_pubnames", ".zdebug_pubnames" }, { ".debug_pubtypes", ".zdebug_pubtypes" }, { ".debug_ranges", ".zdebug_ranges" }, { ".debug_static_func", ".zdebug_static_func" }, { ".debug_static_vars", ".zdebug_static_vars" }, { ".debug_str", ".zdebug_str", }, { ".debug_types", ".zdebug_types" }, /* GNU DWARF 1 extensions */ { ".debug_sfnames", ".zdebug_sfnames" }, { ".debug_srcinfo", ".zebug_srcinfo" }, /* SGI/MIPS DWARF 2 extensions */ { ".debug_funcnames", ".zdebug_funcnames" }, { ".debug_typenames", ".zdebug_typenames" }, { ".debug_varnames", ".zdebug_varnames" }, { ".debug_weaknames", ".zdebug_weaknames" }, { NULL, NULL }, }; enum dwarf_debug_section_enum { debug_abbrev = 0, debug_aranges, debug_frame, debug_info, debug_line, debug_loc, debug_macinfo, debug_pubnames, debug_pubtypes, debug_ranges, debug_static_func, debug_static_vars, debug_str, debug_types, debug_sfnames, debug_srcinfo, debug_funcnames, debug_typenames, debug_varnames, debug_weaknames }; #ifndef ABBREV_HASH_SIZE #define ABBREV_HASH_SIZE 121 #endif #ifndef ATTR_ALLOC_CHUNK #define ATTR_ALLOC_CHUNK 4 #endif /* Variable and function hash tables. This is used to speed up look-up in lookup_symbol_in_var_table() and lookup_symbol_in_function_table(). In order to share code between variable and function infos, we use a list of untyped pointer for all variable/function info associated with a symbol. We waste a bit of memory for list with one node but that simplifies the code. */ struct info_list_node { struct info_list_node *next; void *info; }; /* Info hash entry. */ struct info_hash_entry { struct bfd_hash_entry root; struct info_list_node *head; }; struct info_hash_table { struct bfd_hash_table base; }; /* Function to create a new entry in info hash table. */ static struct bfd_hash_entry * info_hash_table_newfunc (struct bfd_hash_entry *entry, struct bfd_hash_table *table, const char *string) { struct info_hash_entry *ret = (struct info_hash_entry *) entry; /* Allocate the structure if it has not already been allocated by a derived class. */ if (ret == NULL) { ret = (struct info_hash_entry *) bfd_hash_allocate (table, sizeof (* ret)); if (ret == NULL) return NULL; } /* Call the allocation method of the base class. */ ret = ((struct info_hash_entry *) bfd_hash_newfunc ((struct bfd_hash_entry *) ret, table, string)); /* Initialize the local fields here. */ if (ret) ret->head = NULL; return (struct bfd_hash_entry *) ret; } /* Function to create a new info hash table. It returns a pointer to the newly created table or NULL if there is any error. We need abfd solely for memory allocation. */ static struct info_hash_table * create_info_hash_table (bfd *abfd) { struct info_hash_table *hash_table; hash_table = (struct info_hash_table *) bfd_alloc (abfd, sizeof (struct info_hash_table)); if (!hash_table) return hash_table; if (!bfd_hash_table_init (&hash_table->base, info_hash_table_newfunc, sizeof (struct info_hash_entry))) { bfd_release (abfd, hash_table); return NULL; } return hash_table; } /* Insert an info entry into an info hash table. We do not check of duplicate entries. Also, the caller need to guarantee that the right type of info in inserted as info is passed as a void* pointer. This function returns true if there is no error. */ static bfd_boolean insert_info_hash_table (struct info_hash_table *hash_table, const char *key, void *info, bfd_boolean copy_p) { struct info_hash_entry *entry; struct info_list_node *node; entry = (struct info_hash_entry*) bfd_hash_lookup (&hash_table->base, key, TRUE, copy_p); if (!entry) return FALSE; node = (struct info_list_node *) bfd_hash_allocate (&hash_table->base, sizeof (*node)); if (!node) return FALSE; node->info = info; node->next = entry->head; entry->head = node; return TRUE; } /* Look up an info entry list from an info hash table. Return NULL if there is none. */ static struct info_list_node * lookup_info_hash_table (struct info_hash_table *hash_table, const char *key) { struct info_hash_entry *entry; entry = (struct info_hash_entry*) bfd_hash_lookup (&hash_table->base, key, FALSE, FALSE); return entry ? entry->head : NULL; } /* Read a section into its appropriate place in the dwarf2_debug struct (indicated by SECTION_BUFFER and SECTION_SIZE). If SYMS is not NULL, use bfd_simple_get_relocated_section_contents to read the section contents, otherwise use bfd_get_section_contents. Fail if the located section does not contain at least OFFSET bytes. */ static bfd_boolean read_section (bfd * abfd, enum dwarf_debug_section_enum sec, asymbol ** syms, bfd_uint64_t offset, bfd_byte ** section_buffer, bfd_size_type * section_size) { asection *msec; const char *section_name = dwarf_debug_sections[sec].uncompressed_name; /* read_section is a noop if the section has already been read. */ if (!*section_buffer) { msec = bfd_get_section_by_name (abfd, section_name); if (! msec) { section_name = dwarf_debug_sections[sec].compressed_name; msec = bfd_get_section_by_name (abfd, section_name); } if (! msec) { (*_bfd_error_handler) (_("Dwarf Error: Can't find %s section."), section_name); bfd_set_error (bfd_error_bad_value); return FALSE; } *section_size = msec->rawsize ? msec->rawsize : msec->size; if (syms) { *section_buffer = bfd_simple_get_relocated_section_contents (abfd, msec, NULL, syms); if (! *section_buffer) return FALSE; } else { *section_buffer = (bfd_byte *) bfd_malloc (*section_size); if (! *section_buffer) return FALSE; if (! bfd_get_section_contents (abfd, msec, *section_buffer, 0, *section_size)) return FALSE; } } /* It is possible to get a bad value for the offset into the section that the client wants. Validate it here to avoid trouble later. */ if (offset != 0 && offset >= *section_size) { (*_bfd_error_handler) (_("Dwarf Error: Offset (%lu) greater than or equal to %s size (%lu)."), (long) offset, section_name, *section_size); bfd_set_error (bfd_error_bad_value); return FALSE; } return TRUE; } /* VERBATIM The following function up to the END VERBATIM mark are copied directly from dwarf2read.c. */ /* Read dwarf information from a buffer. */ static unsigned int read_1_byte (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf) { return bfd_get_8 (abfd, buf); } static int read_1_signed_byte (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf) { return bfd_get_signed_8 (abfd, buf); } static unsigned int read_2_bytes (bfd *abfd, bfd_byte *buf) { return bfd_get_16 (abfd, buf); } static unsigned int read_4_bytes (bfd *abfd, bfd_byte *buf) { return bfd_get_32 (abfd, buf); } static bfd_uint64_t read_8_bytes (bfd *abfd, bfd_byte *buf) { return bfd_get_64 (abfd, buf); } static bfd_byte * read_n_bytes (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf, unsigned int size ATTRIBUTE_UNUSED) { return buf; } static char * read_string (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf, unsigned int *bytes_read_ptr) { /* Return a pointer to the embedded string. */ char *str = (char *) buf; if (*str == '\0') { *bytes_read_ptr = 1; return NULL; } *bytes_read_ptr = strlen (str) + 1; return str; } /* END VERBATIM */ static char * read_indirect_string (struct comp_unit * unit, bfd_byte * buf, unsigned int * bytes_read_ptr) { bfd_uint64_t offset; struct dwarf2_debug *stash = unit->stash; char *str; if (unit->offset_size == 4) offset = read_4_bytes (unit->abfd, buf); else offset = read_8_bytes (unit->abfd, buf); *bytes_read_ptr = unit->offset_size; if (! read_section (unit->abfd, debug_str, stash->syms, offset, &stash->dwarf_str_buffer, &stash->dwarf_str_size)) return NULL; str = (char *) stash->dwarf_str_buffer + offset; if (*str == '\0') return NULL; return str; } static bfd_uint64_t read_address (struct comp_unit *unit, bfd_byte *buf) { int signed_vma = get_elf_backend_data (unit->abfd)->sign_extend_vma; if (signed_vma) { switch (unit->addr_size) { case 8: return bfd_get_signed_64 (unit->abfd, buf); case 4: return bfd_get_signed_32 (unit->abfd, buf); case 2: return bfd_get_signed_16 (unit->abfd, buf); default: abort (); } } else { switch (unit->addr_size) { case 8: return bfd_get_64 (unit->abfd, buf); case 4: return bfd_get_32 (unit->abfd, buf); case 2: return bfd_get_16 (unit->abfd, buf); default: abort (); } } } /* Lookup an abbrev_info structure in the abbrev hash table. */ static struct abbrev_info * lookup_abbrev (unsigned int number, struct abbrev_info **abbrevs) { unsigned int hash_number; struct abbrev_info *abbrev; hash_number = number % ABBREV_HASH_SIZE; abbrev = abbrevs[hash_number]; while (abbrev) { if (abbrev->number == number) return abbrev; else abbrev = abbrev->next; } return NULL; } /* In DWARF version 2, the description of the debugging information is stored in a separate .debug_abbrev section. Before we read any dies from a section we read in all abbreviations and install them in a hash table. */ static struct abbrev_info** read_abbrevs (bfd *abfd, bfd_uint64_t offset, struct dwarf2_debug *stash) { struct abbrev_info **abbrevs; bfd_byte *abbrev_ptr; struct abbrev_info *cur_abbrev; unsigned int abbrev_number, bytes_read, abbrev_name; unsigned int abbrev_form, hash_number; bfd_size_type amt; if (! read_section (abfd, debug_abbrev, stash->syms, offset, &stash->dwarf_abbrev_buffer, &stash->dwarf_abbrev_size)) return NULL; amt = sizeof (struct abbrev_info*) * ABBREV_HASH_SIZE; abbrevs = (struct abbrev_info **) bfd_zalloc (abfd, amt); if (abbrevs == NULL) return NULL; abbrev_ptr = stash->dwarf_abbrev_buffer + offset; abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; /* Loop until we reach an abbrev number of 0. */ while (abbrev_number) { amt = sizeof (struct abbrev_info); cur_abbrev = (struct abbrev_info *) bfd_zalloc (abfd, amt); if (cur_abbrev == NULL) return NULL; /* Read in abbrev header. */ cur_abbrev->number = abbrev_number; cur_abbrev->tag = (enum dwarf_tag) read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; cur_abbrev->has_children = read_1_byte (abfd, abbrev_ptr); abbrev_ptr += 1; /* Now read in declarations. */ abbrev_name = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; abbrev_form = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; while (abbrev_name) { if ((cur_abbrev->num_attrs % ATTR_ALLOC_CHUNK) == 0) { struct attr_abbrev *tmp; amt = cur_abbrev->num_attrs + ATTR_ALLOC_CHUNK; amt *= sizeof (struct attr_abbrev); tmp = (struct attr_abbrev *) bfd_realloc (cur_abbrev->attrs, amt); if (tmp == NULL) { size_t i; for (i = 0; i < ABBREV_HASH_SIZE; i++) { struct abbrev_info *abbrev = abbrevs[i]; while (abbrev) { free (abbrev->attrs); abbrev = abbrev->next; } } return NULL; } cur_abbrev->attrs = tmp; } cur_abbrev->attrs[cur_abbrev->num_attrs].name = (enum dwarf_attribute) abbrev_name; cur_abbrev->attrs[cur_abbrev->num_attrs++].form = (enum dwarf_form) abbrev_form; abbrev_name = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; abbrev_form = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; } hash_number = abbrev_number % ABBREV_HASH_SIZE; cur_abbrev->next = abbrevs[hash_number]; abbrevs[hash_number] = cur_abbrev; /* Get next abbreviation. Under Irix6 the abbreviations for a compilation unit are not always properly terminated with an abbrev number of 0. Exit loop if we encounter an abbreviation which we have already read (which means we are about to read the abbreviations for the next compile unit) or if the end of the abbreviation table is reached. */ if ((unsigned int) (abbrev_ptr - stash->dwarf_abbrev_buffer) >= stash->dwarf_abbrev_size) break; abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read); abbrev_ptr += bytes_read; if (lookup_abbrev (abbrev_number,abbrevs) != NULL) break; } return abbrevs; } /* Read an attribute value described by an attribute form. */ static bfd_byte * read_attribute_value (struct attribute *attr, unsigned form, struct comp_unit *unit, bfd_byte *info_ptr) { bfd *abfd = unit->abfd; unsigned int bytes_read; struct dwarf_block *blk; bfd_size_type amt; attr->form = (enum dwarf_form) form; switch (form) { case DW_FORM_ref_addr: /* DW_FORM_ref_addr is an address in DWARF2, and an offset in DWARF3. */ if (unit->version == 3 || unit->version == 4) { if (unit->offset_size == 4) attr->u.val = read_4_bytes (unit->abfd, info_ptr); else attr->u.val = read_8_bytes (unit->abfd, info_ptr); info_ptr += unit->offset_size; break; } /* FALLTHROUGH */ case DW_FORM_addr: attr->u.val = read_address (unit, info_ptr); info_ptr += unit->addr_size; break; case DW_FORM_sec_offset: if (unit->offset_size == 4) attr->u.val = read_4_bytes (unit->abfd, info_ptr); else attr->u.val = read_8_bytes (unit->abfd, info_ptr); info_ptr += unit->offset_size; break; case DW_FORM_block2: amt = sizeof (struct dwarf_block); blk = (struct dwarf_block *) bfd_alloc (abfd, amt); if (blk == NULL) return NULL; blk->size = read_2_bytes (abfd, info_ptr); info_ptr += 2; blk->data = read_n_bytes (abfd, info_ptr, blk->size); info_ptr += blk->size; attr->u.blk = blk; break; case DW_FORM_block4: amt = sizeof (struct dwarf_block); blk = (struct dwarf_block *) bfd_alloc (abfd, amt); if (blk == NULL) return NULL; blk->size = read_4_bytes (abfd, info_ptr); info_ptr += 4; blk->data = read_n_bytes (abfd, info_ptr, blk->size); info_ptr += blk->size; attr->u.blk = blk; break; case DW_FORM_data2: attr->u.val = read_2_bytes (abfd, info_ptr); info_ptr += 2; break; case DW_FORM_data4: attr->u.val = read_4_bytes (abfd, info_ptr); info_ptr += 4; break; case DW_FORM_data8: attr->u.val = read_8_bytes (abfd, info_ptr); info_ptr += 8; break; case DW_FORM_string: attr->u.str = read_string (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; break; case DW_FORM_strp: attr->u.str = read_indirect_string (unit, info_ptr, &bytes_read); info_ptr += bytes_read; break; case DW_FORM_exprloc: case DW_FORM_block: amt = sizeof (struct dwarf_block); blk = (struct dwarf_block *) bfd_alloc (abfd, amt); if (blk == NULL) return NULL; blk->size = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; blk->data = read_n_bytes (abfd, info_ptr, blk->size); info_ptr += blk->size; attr->u.blk = blk; break; case DW_FORM_block1: amt = sizeof (struct dwarf_block); blk = (struct dwarf_block *) bfd_alloc (abfd, amt); if (blk == NULL) return NULL; blk->size = read_1_byte (abfd, info_ptr); info_ptr += 1; blk->data = read_n_bytes (abfd, info_ptr, blk->size); info_ptr += blk->size; attr->u.blk = blk; break; case DW_FORM_data1: attr->u.val = read_1_byte (abfd, info_ptr); info_ptr += 1; break; case DW_FORM_flag: attr->u.val = read_1_byte (abfd, info_ptr); info_ptr += 1; break; case DW_FORM_flag_present: attr->u.val = 1; break; case DW_FORM_sdata: attr->u.sval = read_signed_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; break; case DW_FORM_udata: attr->u.val = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; break; case DW_FORM_ref1: attr->u.val = read_1_byte (abfd, info_ptr); info_ptr += 1; break; case DW_FORM_ref2: attr->u.val = read_2_bytes (abfd, info_ptr); info_ptr += 2; break; case DW_FORM_ref4: attr->u.val = read_4_bytes (abfd, info_ptr); info_ptr += 4; break; case DW_FORM_ref8: attr->u.val = read_8_bytes (abfd, info_ptr); info_ptr += 8; break; case DW_FORM_ref_sig8: attr->u.val = read_8_bytes (abfd, info_ptr); info_ptr += 8; break; case DW_FORM_ref_udata: attr->u.val = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; break; case DW_FORM_indirect: form = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; info_ptr = read_attribute_value (attr, form, unit, info_ptr); break; default: (*_bfd_error_handler) (_("Dwarf Error: Invalid or unhandled FORM value: %u."), form); bfd_set_error (bfd_error_bad_value); return NULL; } return info_ptr; } /* Read an attribute described by an abbreviated attribute. */ static bfd_byte * read_attribute (struct attribute *attr, struct attr_abbrev *abbrev, struct comp_unit *unit, bfd_byte *info_ptr) { attr->name = abbrev->name; info_ptr = read_attribute_value (attr, abbrev->form, unit, info_ptr); return info_ptr; } /* Source line information table routines. */ #define FILE_ALLOC_CHUNK 5 #define DIR_ALLOC_CHUNK 5 struct line_info { struct line_info* prev_line; bfd_vma address; char *filename; unsigned int line; unsigned int column; unsigned char op_index; unsigned char end_sequence; /* End of (sequential) code sequence. */ }; struct fileinfo { char *name; unsigned int dir; unsigned int time; unsigned int size; }; struct line_sequence { bfd_vma low_pc; struct line_sequence* prev_sequence; struct line_info* last_line; /* Largest VMA. */ }; struct line_info_table { bfd* abfd; unsigned int num_files; unsigned int num_dirs; unsigned int num_sequences; char * comp_dir; char ** dirs; struct fileinfo* files; struct line_sequence* sequences; struct line_info* lcl_head; /* Local head; used in 'add_line_info'. */ }; /* Remember some information about each function. If the function is inlined (DW_TAG_inlined_subroutine) it may have two additional attributes, DW_AT_call_file and DW_AT_call_line, which specify the source code location where this function was inlined. */ struct funcinfo { struct funcinfo *prev_func; /* Pointer to previous function in list of all functions */ struct funcinfo *caller_func; /* Pointer to function one scope higher */ char *caller_file; /* Source location file name where caller_func inlines this func */ int caller_line; /* Source location line number where caller_func inlines this func */ char *file; /* Source location file name */ int line; /* Source location line number */ int tag; char *name; struct arange arange; asection *sec; /* Where the symbol is defined */ }; struct varinfo { /* Pointer to previous variable in list of all variables */ struct varinfo *prev_var; /* Source location file name */ char *file; /* Source location line number */ int line; int tag; char *name; bfd_vma addr; /* Where the symbol is defined */ asection *sec; /* Is this a stack variable? */ unsigned int stack: 1; }; /* Return TRUE if NEW_LINE should sort after LINE. */ static inline bfd_boolean new_line_sorts_after (struct line_info *new_line, struct line_info *line) { return (new_line->address > line->address || (new_line->address == line->address && (new_line->op_index > line->op_index || (new_line->op_index == line->op_index && new_line->end_sequence < line->end_sequence)))); } /* Adds a new entry to the line_info list in the line_info_table, ensuring that the list is sorted. Note that the line_info list is sorted from highest to lowest VMA (with possible duplicates); that is, line_info->prev_line always accesses an equal or smaller VMA. */ static bfd_boolean add_line_info (struct line_info_table *table, bfd_vma address, unsigned char op_index, char *filename, unsigned int line, unsigned int column, int end_sequence) { bfd_size_type amt = sizeof (struct line_info); struct line_sequence* seq = table->sequences; struct line_info* info = (struct line_info *) bfd_alloc (table->abfd, amt); if (info == NULL) return FALSE; /* Set member data of 'info'. */ info->prev_line = NULL; info->address = address; info->op_index = op_index; info->line = line; info->column = column; info->end_sequence = end_sequence; if (filename && filename[0]) { info->filename = (char *) bfd_alloc (table->abfd, strlen (filename) + 1); if (info->filename == NULL) return FALSE; strcpy (info->filename, filename); } else info->filename = NULL; /* Find the correct location for 'info'. Normally we will receive new line_info data 1) in order and 2) with increasing VMAs. However some compilers break the rules (cf. decode_line_info) and so we include some heuristics for quickly finding the correct location for 'info'. In particular, these heuristics optimize for the common case in which the VMA sequence that we receive is a list of locally sorted VMAs such as p...z a...j (where a < j < p < z) Note: table->lcl_head is used to head an *actual* or *possible* sub-sequence within the list (such as a...j) that is not directly headed by table->last_line Note: we may receive duplicate entries from 'decode_line_info'. */ if (seq && seq->last_line->address == address && seq->last_line->op_index == op_index && seq->last_line->end_sequence == end_sequence) { /* We only keep the last entry with the same address and end sequence. See PR ld/4986. */ if (table->lcl_head == seq->last_line) table->lcl_head = info; info->prev_line = seq->last_line->prev_line; seq->last_line = info; } else if (!seq || seq->last_line->end_sequence) { /* Start a new line sequence. */ amt = sizeof (struct line_sequence); seq = (struct line_sequence *) bfd_malloc (amt); if (seq == NULL) return FALSE; seq->low_pc = address; seq->prev_sequence = table->sequences; seq->last_line = info; table->lcl_head = info; table->sequences = seq; table->num_sequences++; } else if (new_line_sorts_after (info, seq->last_line)) { /* Normal case: add 'info' to the beginning of the current sequence. */ info->prev_line = seq->last_line; seq->last_line = info; /* lcl_head: initialize to head a *possible* sequence at the end. */ if (!table->lcl_head) table->lcl_head = info; } else if (!new_line_sorts_after (info, table->lcl_head) && (!table->lcl_head->prev_line || new_line_sorts_after (info, table->lcl_head->prev_line))) { /* Abnormal but easy: lcl_head is the head of 'info'. */ info->prev_line = table->lcl_head->prev_line; table->lcl_head->prev_line = info; } else { /* Abnormal and hard: Neither 'last_line' nor 'lcl_head' are valid heads for 'info'. Reset 'lcl_head'. */ struct line_info* li2 = seq->last_line; /* Always non-NULL. */ struct line_info* li1 = li2->prev_line; while (li1) { if (!new_line_sorts_after (info, li2) && new_line_sorts_after (info, li1)) break; li2 = li1; /* always non-NULL */ li1 = li1->prev_line; } table->lcl_head = li2; info->prev_line = table->lcl_head->prev_line; table->lcl_head->prev_line = info; if (address < seq->low_pc) seq->low_pc = address; } return TRUE; } /* Extract a fully qualified filename from a line info table. The returned string has been malloc'ed and it is the caller's responsibility to free it. */ static char * concat_filename (struct line_info_table *table, unsigned int file) { char *filename; if (file - 1 >= table->num_files) { /* FILE == 0 means unknown. */ if (file) (*_bfd_error_handler) (_("Dwarf Error: mangled line number section (bad file number).")); return strdup ("<unknown>"); } filename = table->files[file - 1].name; if (!IS_ABSOLUTE_PATH (filename)) { char *dir_name = NULL; char *subdir_name = NULL; char *name; size_t len; if (table->files[file - 1].dir) subdir_name = table->dirs[table->files[file - 1].dir - 1]; if (!subdir_name || !IS_ABSOLUTE_PATH (subdir_name)) dir_name = table->comp_dir; if (!dir_name) { dir_name = subdir_name; subdir_name = NULL; } if (!dir_name) return strdup (filename); len = strlen (dir_name) + strlen (filename) + 2; if (subdir_name) { len += strlen (subdir_name) + 1; name = (char *) bfd_malloc (len); if (name) sprintf (name, "%s/%s/%s", dir_name, subdir_name, filename); } else { name = (char *) bfd_malloc (len); if (name) sprintf (name, "%s/%s", dir_name, filename); } return name; } return strdup (filename); } static bfd_boolean arange_add (bfd *abfd, struct arange *first_arange, bfd_vma low_pc, bfd_vma high_pc) { struct arange *arange; /* If the first arange is empty, use it. */ if (first_arange->high == 0) { first_arange->low = low_pc; first_arange->high = high_pc; return TRUE; } /* Next see if we can cheaply extend an existing range. */ arange = first_arange; do { if (low_pc == arange->high) { arange->high = high_pc; return TRUE; } if (high_pc == arange->low) { arange->low = low_pc; return TRUE; } arange = arange->next; } while (arange); /* Need to allocate a new arange and insert it into the arange list. Order isn't significant, so just insert after the first arange. */ arange = (struct arange *) bfd_zalloc (abfd, sizeof (*arange)); if (arange == NULL) return FALSE; arange->low = low_pc; arange->high = high_pc; arange->next = first_arange->next; first_arange->next = arange; return TRUE; } /* Compare function for line sequences. */ static int compare_sequences (const void* a, const void* b) { const struct line_sequence* seq1 = a; const struct line_sequence* seq2 = b; /* Sort by low_pc as the primary key. */ if (seq1->low_pc < seq2->low_pc) return -1; if (seq1->low_pc > seq2->low_pc) return 1; /* If low_pc values are equal, sort in reverse order of high_pc, so that the largest region comes first. */ if (seq1->last_line->address < seq2->last_line->address) return 1; if (seq1->last_line->address > seq2->last_line->address) return -1; if (seq1->last_line->op_index < seq2->last_line->op_index) return 1; if (seq1->last_line->op_index > seq2->last_line->op_index) return -1; return 0; } /* Sort the line sequences for quick lookup. */ static bfd_boolean sort_line_sequences (struct line_info_table* table) { bfd_size_type amt; struct line_sequence* sequences; struct line_sequence* seq; unsigned int n = 0; unsigned int num_sequences = table->num_sequences; bfd_vma last_high_pc; if (num_sequences == 0) return TRUE; /* Allocate space for an array of sequences. */ amt = sizeof (struct line_sequence) * num_sequences; sequences = (struct line_sequence *) bfd_alloc (table->abfd, amt); if (sequences == NULL) return FALSE; /* Copy the linked list into the array, freeing the original nodes. */ seq = table->sequences; for (n = 0; n < num_sequences; n++) { struct line_sequence* last_seq = seq; BFD_ASSERT (seq); sequences[n].low_pc = seq->low_pc; sequences[n].prev_sequence = NULL; sequences[n].last_line = seq->last_line; seq = seq->prev_sequence; free (last_seq); } BFD_ASSERT (seq == NULL); qsort (sequences, n, sizeof (struct line_sequence), compare_sequences); /* Make the list binary-searchable by trimming overlapping entries and removing nested entries. */ num_sequences = 1; last_high_pc = sequences[0].last_line->address; for (n = 1; n < table->num_sequences; n++) { if (sequences[n].low_pc < last_high_pc) { if (sequences[n].last_line->address <= last_high_pc) /* Skip nested entries. */ continue; /* Trim overlapping entries. */ sequences[n].low_pc = last_high_pc; } last_high_pc = sequences[n].last_line->address; if (n > num_sequences) { /* Close up the gap. */ sequences[num_sequences].low_pc = sequences[n].low_pc; sequences[num_sequences].last_line = sequences[n].last_line; } num_sequences++; } table->sequences = sequences; table->num_sequences = num_sequences; return TRUE; } /* Decode the line number information for UNIT. */ static struct line_info_table* decode_line_info (struct comp_unit *unit, struct dwarf2_debug *stash) { bfd *abfd = unit->abfd; struct line_info_table* table; bfd_byte *line_ptr; bfd_byte *line_end; struct line_head lh; unsigned int i, bytes_read, offset_size; char *cur_file, *cur_dir; unsigned char op_code, extended_op, adj_opcode; bfd_size_type amt; if (! read_section (abfd, debug_line, stash->syms, unit->line_offset, &stash->dwarf_line_buffer, &stash->dwarf_line_size)) return NULL; amt = sizeof (struct line_info_table); table = (struct line_info_table *) bfd_alloc (abfd, amt); if (table == NULL) return NULL; table->abfd = abfd; table->comp_dir = unit->comp_dir; table->num_files = 0; table->files = NULL; table->num_dirs = 0; table->dirs = NULL; table->num_sequences = 0; table->sequences = NULL; table->lcl_head = NULL; line_ptr = stash->dwarf_line_buffer + unit->line_offset; /* Read in the prologue. */ lh.total_length = read_4_bytes (abfd, line_ptr); line_ptr += 4; offset_size = 4; if (lh.total_length == 0xffffffff) { lh.total_length = read_8_bytes (abfd, line_ptr); line_ptr += 8; offset_size = 8; } else if (lh.total_length == 0 && unit->addr_size == 8) { /* Handle (non-standard) 64-bit DWARF2 formats. */ lh.total_length = read_4_bytes (abfd, line_ptr); line_ptr += 4; offset_size = 8; } line_end = line_ptr + lh.total_length; lh.version = read_2_bytes (abfd, line_ptr); if (lh.version < 2 || lh.version > 4) { (*_bfd_error_handler) (_("Dwarf Error: Unhandled .debug_line version %d."), lh.version); bfd_set_error (bfd_error_bad_value); return NULL; } line_ptr += 2; if (offset_size == 4) lh.prologue_length = read_4_bytes (abfd, line_ptr); else lh.prologue_length = read_8_bytes (abfd, line_ptr); line_ptr += offset_size; lh.minimum_instruction_length = read_1_byte (abfd, line_ptr); line_ptr += 1; if (lh.version >= 4) { lh.maximum_ops_per_insn = read_1_byte (abfd, line_ptr); line_ptr += 1; } else lh.maximum_ops_per_insn = 1; if (lh.maximum_ops_per_insn == 0) { (*_bfd_error_handler) (_("Dwarf Error: Invalid maximum operations per instruction.")); bfd_set_error (bfd_error_bad_value); return NULL; } lh.default_is_stmt = read_1_byte (abfd, line_ptr); line_ptr += 1; lh.line_base = read_1_signed_byte (abfd, line_ptr); line_ptr += 1; lh.line_range = read_1_byte (abfd, line_ptr); line_ptr += 1; lh.opcode_base = read_1_byte (abfd, line_ptr); line_ptr += 1; amt = lh.opcode_base * sizeof (unsigned char); lh.standard_opcode_lengths = (unsigned char *) bfd_alloc (abfd, amt); lh.standard_opcode_lengths[0] = 1; for (i = 1; i < lh.opcode_base; ++i) { lh.standard_opcode_lengths[i] = read_1_byte (abfd, line_ptr); line_ptr += 1; } /* Read directory table. */ while ((cur_dir = read_string (abfd, line_ptr, &bytes_read)) != NULL) { line_ptr += bytes_read; if ((table->num_dirs % DIR_ALLOC_CHUNK) == 0) { char **tmp; amt = table->num_dirs + DIR_ALLOC_CHUNK; amt *= sizeof (char *); tmp = (char **) bfd_realloc (table->dirs, amt); if (tmp == NULL) goto fail; table->dirs = tmp; } table->dirs[table->num_dirs++] = cur_dir; } line_ptr += bytes_read; /* Read file name table. */ while ((cur_file = read_string (abfd, line_ptr, &bytes_read)) != NULL) { line_ptr += bytes_read; if ((table->num_files % FILE_ALLOC_CHUNK) == 0) { struct fileinfo *tmp; amt = table->num_files + FILE_ALLOC_CHUNK; amt *= sizeof (struct fileinfo); tmp = (struct fileinfo *) bfd_realloc (table->files, amt); if (tmp == NULL) goto fail; table->files = tmp; } table->files[table->num_files].name = cur_file; table->files[table->num_files].dir = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; table->files[table->num_files].time = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; table->files[table->num_files].size = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; table->num_files++; } line_ptr += bytes_read; /* Read the statement sequences until there's nothing left. */ while (line_ptr < line_end) { /* State machine registers. */ bfd_vma address = 0; unsigned char op_index = 0; char * filename = table->num_files ? concat_filename (table, 1) : NULL; unsigned int line = 1; unsigned int column = 0; int is_stmt = lh.default_is_stmt; int end_sequence = 0; /* eraxxon@alumni.rice.edu: Against the DWARF2 specs, some compilers generate address sequences that are wildly out of order using DW_LNE_set_address (e.g. Intel C++ 6.0 compiler for ia64-Linux). Thus, to determine the low and high address, we must compare on every DW_LNS_copy, etc. */ bfd_vma low_pc = (bfd_vma) -1; bfd_vma high_pc = 0; /* Decode the table. */ while (! end_sequence) { op_code = read_1_byte (abfd, line_ptr); line_ptr += 1; if (op_code >= lh.opcode_base) { /* Special operand. */ adj_opcode = op_code - lh.opcode_base; if (lh.maximum_ops_per_insn == 1) address += (adj_opcode / lh.line_range) * lh.minimum_instruction_length; else { address += ((op_index + (adj_opcode / lh.line_range)) / lh.maximum_ops_per_insn) * lh.minimum_instruction_length; op_index = (op_index + (adj_opcode / lh.line_range)) % lh.maximum_ops_per_insn; } line += lh.line_base + (adj_opcode % lh.line_range); /* Append row to matrix using current values. */ if (!add_line_info (table, address, op_index, filename, line, column, 0)) goto line_fail; if (address < low_pc) low_pc = address; if (address > high_pc) high_pc = address; } else switch (op_code) { case DW_LNS_extended_op: /* Ignore length. */ line_ptr += 1; extended_op = read_1_byte (abfd, line_ptr); line_ptr += 1; switch (extended_op) { case DW_LNE_end_sequence: end_sequence = 1; if (!add_line_info (table, address, op_index, filename, line, column, end_sequence)) goto line_fail; if (address < low_pc) low_pc = address; if (address > high_pc) high_pc = address; if (!arange_add (unit->abfd, &unit->arange, low_pc, high_pc)) goto line_fail; break; case DW_LNE_set_address: address = read_address (unit, line_ptr); op_index = 0; line_ptr += unit->addr_size; break; case DW_LNE_define_file: cur_file = read_string (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; if ((table->num_files % FILE_ALLOC_CHUNK) == 0) { struct fileinfo *tmp; amt = table->num_files + FILE_ALLOC_CHUNK; amt *= sizeof (struct fileinfo); tmp = (struct fileinfo *) bfd_realloc (table->files, amt); if (tmp == NULL) goto line_fail; table->files = tmp; } table->files[table->num_files].name = cur_file; table->files[table->num_files].dir = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; table->files[table->num_files].time = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; table->files[table->num_files].size = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; table->num_files++; break; case DW_LNE_set_discriminator: (void) read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; break; default: (*_bfd_error_handler) (_("Dwarf Error: mangled line number section.")); bfd_set_error (bfd_error_bad_value); line_fail: if (filename != NULL) free (filename); goto fail; } break; case DW_LNS_copy: if (!add_line_info (table, address, op_index, filename, line, column, 0)) goto line_fail; if (address < low_pc) low_pc = address; if (address > high_pc) high_pc = address; break; case DW_LNS_advance_pc: if (lh.maximum_ops_per_insn == 1) address += lh.minimum_instruction_length * read_unsigned_leb128 (abfd, line_ptr, &bytes_read); else { bfd_vma adjust = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); address = ((op_index + adjust) / lh.maximum_ops_per_insn) * lh.minimum_instruction_length; op_index = (op_index + adjust) % lh.maximum_ops_per_insn; } line_ptr += bytes_read; break; case DW_LNS_advance_line: line += read_signed_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; break; case DW_LNS_set_file: { unsigned int file; /* The file and directory tables are 0 based, the references are 1 based. */ file = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; if (filename) free (filename); filename = concat_filename (table, file); break; } case DW_LNS_set_column: column = read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; break; case DW_LNS_negate_stmt: is_stmt = (!is_stmt); break; case DW_LNS_set_basic_block: break; case DW_LNS_const_add_pc: if (lh.maximum_ops_per_insn == 1) address += lh.minimum_instruction_length * ((255 - lh.opcode_base) / lh.line_range); else { bfd_vma adjust = ((255 - lh.opcode_base) / lh.line_range); address += lh.minimum_instruction_length * ((op_index + adjust) / lh.maximum_ops_per_insn); op_index = (op_index + adjust) % lh.maximum_ops_per_insn; } break; case DW_LNS_fixed_advance_pc: address += read_2_bytes (abfd, line_ptr); op_index = 0; line_ptr += 2; break; default: /* Unknown standard opcode, ignore it. */ for (i = 0; i < lh.standard_opcode_lengths[op_code]; i++) { (void) read_unsigned_leb128 (abfd, line_ptr, &bytes_read); line_ptr += bytes_read; } break; } } if (filename) free (filename); } if (sort_line_sequences (table)) return table; fail: if (table->sequences != NULL) free (table->sequences); if (table->files != NULL) free (table->files); if (table->dirs != NULL) free (table->dirs); return NULL; } /* If ADDR is within TABLE set the output parameters and return TRUE, otherwise return FALSE. The output parameters, FILENAME_PTR and LINENUMBER_PTR, are pointers to the objects to be filled in. */ static bfd_boolean lookup_address_in_line_info_table (struct line_info_table *table, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr) { struct line_sequence *seq = NULL; struct line_info *each_line; int low, high, mid; /* Binary search the array of sequences. */ low = 0; high = table->num_sequences; while (low < high) { mid = (low + high) / 2; seq = &table->sequences[mid]; if (addr < seq->low_pc) high = mid; else if (addr >= seq->last_line->address) low = mid + 1; else break; } if (seq && addr >= seq->low_pc && addr < seq->last_line->address) { /* Note: seq->last_line should be a descendingly sorted list. */ for (each_line = seq->last_line; each_line; each_line = each_line->prev_line) if (addr >= each_line->address) break; if (each_line && !(each_line->end_sequence || each_line == seq->last_line)) { *filename_ptr = each_line->filename; *linenumber_ptr = each_line->line; return TRUE; } } *filename_ptr = NULL; return FALSE; } /* Read in the .debug_ranges section for future reference. */ static bfd_boolean read_debug_ranges (struct comp_unit *unit) { struct dwarf2_debug *stash = unit->stash; return read_section (unit->abfd, debug_ranges, stash->syms, 0, &stash->dwarf_ranges_buffer, &stash->dwarf_ranges_size); } /* Function table functions. */ /* If ADDR is within TABLE, set FUNCTIONNAME_PTR, and return TRUE. Note that we need to find the function that has the smallest range that contains ADDR, to handle inlined functions without depending upon them being ordered in TABLE by increasing range. */ static bfd_boolean lookup_address_in_function_table (struct comp_unit *unit, bfd_vma addr, struct funcinfo **function_ptr, const char **functionname_ptr) { struct funcinfo* each_func; struct funcinfo* best_fit = NULL; struct arange *arange; for (each_func = unit->function_table; each_func; each_func = each_func->prev_func) { for (arange = &each_func->arange; arange; arange = arange->next) { if (addr >= arange->low && addr < arange->high) { if (!best_fit || ((arange->high - arange->low) < (best_fit->arange.high - best_fit->arange.low))) best_fit = each_func; } } } if (best_fit) { *functionname_ptr = best_fit->name; *function_ptr = best_fit; return TRUE; } else { return FALSE; } } /* If SYM at ADDR is within function table of UNIT, set FILENAME_PTR and LINENUMBER_PTR, and return TRUE. */ static bfd_boolean lookup_symbol_in_function_table (struct comp_unit *unit, asymbol *sym, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr) { struct funcinfo* each_func; struct funcinfo* best_fit = NULL; struct arange *arange; const char *name = bfd_asymbol_name (sym); asection *sec = bfd_get_section (sym); for (each_func = unit->function_table; each_func; each_func = each_func->prev_func) { for (arange = &each_func->arange; arange; arange = arange->next) { if ((!each_func->sec || each_func->sec == sec) && addr >= arange->low && addr < arange->high && each_func->name && strcmp (name, each_func->name) == 0 && (!best_fit || ((arange->high - arange->low) < (best_fit->arange.high - best_fit->arange.low)))) best_fit = each_func; } } if (best_fit) { best_fit->sec = sec; *filename_ptr = best_fit->file; *linenumber_ptr = best_fit->line; return TRUE; } else return FALSE; } /* Variable table functions. */ /* If SYM is within variable table of UNIT, set FILENAME_PTR and LINENUMBER_PTR, and return TRUE. */ static bfd_boolean lookup_symbol_in_variable_table (struct comp_unit *unit, asymbol *sym, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr) { const char *name = bfd_asymbol_name (sym); asection *sec = bfd_get_section (sym); struct varinfo* each; for (each = unit->variable_table; each; each = each->prev_var) if (each->stack == 0 && each->file != NULL && each->name != NULL && each->addr == addr && (!each->sec || each->sec == sec) && strcmp (name, each->name) == 0) break; if (each) { each->sec = sec; *filename_ptr = each->file; *linenumber_ptr = each->line; return TRUE; } else return FALSE; } static char * find_abstract_instance_name (struct comp_unit *unit, struct attribute *attr_ptr) { bfd *abfd = unit->abfd; bfd_byte *info_ptr; unsigned int abbrev_number, bytes_read, i; struct abbrev_info *abbrev; bfd_uint64_t die_ref = attr_ptr->u.val; struct attribute attr; char *name = 0; /* DW_FORM_ref_addr can reference an entry in a different CU. It is an offset from the .debug_info section, not the current CU. */ if (attr_ptr->form == DW_FORM_ref_addr) { /* We only support DW_FORM_ref_addr within the same file, so any relocations should be resolved already. */ if (!die_ref) abort (); info_ptr = unit->sec_info_ptr + die_ref; } else info_ptr = unit->info_ptr_unit + die_ref; abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; if (abbrev_number) { abbrev = lookup_abbrev (abbrev_number, unit->abbrevs); if (! abbrev) { (*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."), abbrev_number); bfd_set_error (bfd_error_bad_value); } else { for (i = 0; i < abbrev->num_attrs; ++i) { info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr); if (info_ptr == NULL) break; switch (attr.name) { case DW_AT_name: /* Prefer DW_AT_MIPS_linkage_name or DW_AT_linkage_name over DW_AT_name. */ if (name == NULL) name = attr.u.str; break; case DW_AT_specification: name = find_abstract_instance_name (unit, &attr); break; case DW_AT_linkage_name: case DW_AT_MIPS_linkage_name: name = attr.u.str; break; default: break; } } } } return name; } static bfd_boolean read_rangelist (struct comp_unit *unit, struct arange *arange, bfd_uint64_t offset) { bfd_byte *ranges_ptr; bfd_vma base_address = unit->base_address; if (! unit->stash->dwarf_ranges_buffer) { if (! read_debug_ranges (unit)) return FALSE; } ranges_ptr = unit->stash->dwarf_ranges_buffer + offset; for (;;) { bfd_vma low_pc; bfd_vma high_pc; low_pc = read_address (unit, ranges_ptr); ranges_ptr += unit->addr_size; high_pc = read_address (unit, ranges_ptr); ranges_ptr += unit->addr_size; if (low_pc == 0 && high_pc == 0) break; if (low_pc == -1UL && high_pc != -1UL) base_address = high_pc; else { if (!arange_add (unit->abfd, arange, base_address + low_pc, base_address + high_pc)) return FALSE; } } return TRUE; } /* DWARF2 Compilation unit functions. */ /* Scan over each die in a comp. unit looking for functions to add to the function table and variables to the variable table. */ static bfd_boolean scan_unit_for_symbols (struct comp_unit *unit) { bfd *abfd = unit->abfd; bfd_byte *info_ptr = unit->first_child_die_ptr; int nesting_level = 1; struct funcinfo **nested_funcs; int nested_funcs_size; /* Maintain a stack of in-scope functions and inlined functions, which we can use to set the caller_func field. */ nested_funcs_size = 32; nested_funcs = (struct funcinfo **) bfd_malloc (nested_funcs_size * sizeof (struct funcinfo *)); if (nested_funcs == NULL) return FALSE; nested_funcs[nesting_level] = 0; while (nesting_level) { unsigned int abbrev_number, bytes_read, i; struct abbrev_info *abbrev; struct attribute attr; struct funcinfo *func; struct varinfo *var; bfd_vma low_pc = 0; bfd_vma high_pc = 0; abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; if (! abbrev_number) { nesting_level--; continue; } abbrev = lookup_abbrev (abbrev_number,unit->abbrevs); if (! abbrev) { (*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."), abbrev_number); bfd_set_error (bfd_error_bad_value); goto fail; } var = NULL; if (abbrev->tag == DW_TAG_subprogram || abbrev->tag == DW_TAG_entry_point || abbrev->tag == DW_TAG_inlined_subroutine) { bfd_size_type amt = sizeof (struct funcinfo); func = (struct funcinfo *) bfd_zalloc (abfd, amt); if (func == NULL) goto fail; func->tag = abbrev->tag; func->prev_func = unit->function_table; unit->function_table = func; BFD_ASSERT (!unit->cached); if (func->tag == DW_TAG_inlined_subroutine) for (i = nesting_level - 1; i >= 1; i--) if (nested_funcs[i]) { func->caller_func = nested_funcs[i]; break; } nested_funcs[nesting_level] = func; } else { func = NULL; if (abbrev->tag == DW_TAG_variable) { bfd_size_type amt = sizeof (struct varinfo); var = (struct varinfo *) bfd_zalloc (abfd, amt); if (var == NULL) goto fail; var->tag = abbrev->tag; var->stack = 1; var->prev_var = unit->variable_table; unit->variable_table = var; BFD_ASSERT (!unit->cached); } /* No inline function in scope at this nesting level. */ nested_funcs[nesting_level] = 0; } for (i = 0; i < abbrev->num_attrs; ++i) { info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr); if (info_ptr == NULL) goto fail; if (func) { switch (attr.name) { case DW_AT_call_file: func->caller_file = concat_filename (unit->line_table, attr.u.val); break; case DW_AT_call_line: func->caller_line = attr.u.val; break; case DW_AT_abstract_origin: case DW_AT_specification: func->name = find_abstract_instance_name (unit, &attr); break; case DW_AT_name: /* Prefer DW_AT_MIPS_linkage_name or DW_AT_linkage_name over DW_AT_name. */ if (func->name == NULL) func->name = attr.u.str; break; case DW_AT_linkage_name: case DW_AT_MIPS_linkage_name: func->name = attr.u.str; break; case DW_AT_low_pc: low_pc = attr.u.val; break; case DW_AT_high_pc: high_pc = attr.u.val; break; case DW_AT_ranges: if (!read_rangelist (unit, &func->arange, attr.u.val)) goto fail; break; case DW_AT_decl_file: func->file = concat_filename (unit->line_table, attr.u.val); break; case DW_AT_decl_line: func->line = attr.u.val; break; default: break; } } else if (var) { switch (attr.name) { case DW_AT_name: var->name = attr.u.str; break; case DW_AT_decl_file: var->file = concat_filename (unit->line_table, attr.u.val); break; case DW_AT_decl_line: var->line = attr.u.val; break; case DW_AT_external: if (attr.u.val != 0) var->stack = 0; break; case DW_AT_location: switch (attr.form) { case DW_FORM_block: case DW_FORM_block1: case DW_FORM_block2: case DW_FORM_block4: case DW_FORM_exprloc: if (*attr.u.blk->data == DW_OP_addr) { var->stack = 0; /* Verify that DW_OP_addr is the only opcode in the location, in which case the block size will be 1 plus the address size. */ /* ??? For TLS variables, gcc can emit DW_OP_addr <addr> DW_OP_GNU_push_tls_address which we don't handle here yet. */ if (attr.u.blk->size == unit->addr_size + 1U) var->addr = bfd_get (unit->addr_size * 8, unit->abfd, attr.u.blk->data + 1); } break; default: break; } break; default: break; } } } if (func && high_pc != 0) { if (!arange_add (unit->abfd, &func->arange, low_pc, high_pc)) goto fail; } if (abbrev->has_children) { nesting_level++; if (nesting_level >= nested_funcs_size) { struct funcinfo **tmp; nested_funcs_size *= 2; tmp = (struct funcinfo **) bfd_realloc (nested_funcs, (nested_funcs_size * sizeof (struct funcinfo *))); if (tmp == NULL) goto fail; nested_funcs = tmp; } nested_funcs[nesting_level] = 0; } } free (nested_funcs); return TRUE; fail: free (nested_funcs); return FALSE; } /* Parse a DWARF2 compilation unit starting at INFO_PTR. This includes the compilation unit header that proceeds the DIE's, but does not include the length field that precedes each compilation unit header. END_PTR points one past the end of this comp unit. OFFSET_SIZE is the size of DWARF2 offsets (either 4 or 8 bytes). This routine does not read the whole compilation unit; only enough to get to the line number information for the compilation unit. */ static struct comp_unit * parse_comp_unit (struct dwarf2_debug *stash, bfd_vma unit_length, bfd_byte *info_ptr_unit, unsigned int offset_size) { struct comp_unit* unit; unsigned int version; bfd_uint64_t abbrev_offset = 0; unsigned int addr_size; struct abbrev_info** abbrevs; unsigned int abbrev_number, bytes_read, i; struct abbrev_info *abbrev; struct attribute attr; bfd_byte *info_ptr = stash->info_ptr; bfd_byte *end_ptr = info_ptr + unit_length; bfd_size_type amt; bfd_vma low_pc = 0; bfd_vma high_pc = 0; bfd *abfd = stash->bfd_ptr; version = read_2_bytes (abfd, info_ptr); info_ptr += 2; BFD_ASSERT (offset_size == 4 || offset_size == 8); if (offset_size == 4) abbrev_offset = read_4_bytes (abfd, info_ptr); else abbrev_offset = read_8_bytes (abfd, info_ptr); info_ptr += offset_size; addr_size = read_1_byte (abfd, info_ptr); info_ptr += 1; if (version != 2 && version != 3 && version != 4) { (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2, 3 and 4 information."), version); bfd_set_error (bfd_error_bad_value); return 0; } if (addr_size > sizeof (bfd_vma)) { (*_bfd_error_handler) (_("Dwarf Error: found address size '%u', this reader can not handle sizes greater than '%u'."), addr_size, (unsigned int) sizeof (bfd_vma)); bfd_set_error (bfd_error_bad_value); return 0; } if (addr_size != 2 && addr_size != 4 && addr_size != 8) { (*_bfd_error_handler) ("Dwarf Error: found address size '%u', this reader can only handle address sizes '2', '4' and '8'.", addr_size); bfd_set_error (bfd_error_bad_value); return 0; } /* Read the abbrevs for this compilation unit into a table. */ abbrevs = read_abbrevs (abfd, abbrev_offset, stash); if (! abbrevs) return 0; abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read); info_ptr += bytes_read; if (! abbrev_number) { (*_bfd_error_handler) (_("Dwarf Error: Bad abbrev number: %u."), abbrev_number); bfd_set_error (bfd_error_bad_value); return 0; } abbrev = lookup_abbrev (abbrev_number, abbrevs); if (! abbrev) { (*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."), abbrev_number); bfd_set_error (bfd_error_bad_value); return 0; } amt = sizeof (struct comp_unit); unit = (struct comp_unit *) bfd_zalloc (abfd, amt); if (unit == NULL) return NULL; unit->abfd = abfd; unit->version = version; unit->addr_size = addr_size; unit->offset_size = offset_size; unit->abbrevs = abbrevs; unit->end_ptr = end_ptr; unit->stash = stash; unit->info_ptr_unit = info_ptr_unit; unit->sec_info_ptr = stash->sec_info_ptr; for (i = 0; i < abbrev->num_attrs; ++i) { info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr); if (info_ptr == NULL) return NULL; /* Store the data if it is of an attribute we want to keep in a partial symbol table. */ switch (attr.name) { case DW_AT_stmt_list: unit->stmtlist = 1; unit->line_offset = attr.u.val; break; case DW_AT_name: unit->name = attr.u.str; break; case DW_AT_low_pc: low_pc = attr.u.val; /* If the compilation unit DIE has a DW_AT_low_pc attribute, this is the base address to use when reading location lists or range lists. */ unit->base_address = low_pc; break; case DW_AT_high_pc: high_pc = attr.u.val; break; case DW_AT_ranges: if (!read_rangelist (unit, &unit->arange, attr.u.val)) return NULL; break; case DW_AT_comp_dir: { char *comp_dir = attr.u.str; if (comp_dir) { /* Irix 6.2 native cc prepends <machine>.: to the compilation directory, get rid of it. */ char *cp = strchr (comp_dir, ':'); if (cp && cp != comp_dir && cp[-1] == '.' && cp[1] == '/') comp_dir = cp + 1; } unit->comp_dir = comp_dir; break; } default: break; } } if (high_pc != 0) { if (!arange_add (unit->abfd, &unit->arange, low_pc, high_pc)) return NULL; } unit->first_child_die_ptr = info_ptr; return unit; } /* Return TRUE if UNIT may contain the address given by ADDR. When there are functions written entirely with inline asm statements, the range info in the compilation unit header may not be correct. We need to consult the line info table to see if a compilation unit really contains the given address. */ static bfd_boolean comp_unit_contains_address (struct comp_unit *unit, bfd_vma addr) { struct arange *arange; if (unit->error) return FALSE; arange = &unit->arange; do { if (addr >= arange->low && addr < arange->high) return TRUE; arange = arange->next; } while (arange); return FALSE; } /* If UNIT contains ADDR, set the output parameters to the values for the line containing ADDR. The output parameters, FILENAME_PTR, FUNCTIONNAME_PTR, and LINENUMBER_PTR, are pointers to the objects to be filled in. Return TRUE if UNIT contains ADDR, and no errors were encountered; FALSE otherwise. */ static bfd_boolean comp_unit_find_nearest_line (struct comp_unit *unit, bfd_vma addr, const char **filename_ptr, const char **functionname_ptr, unsigned int *linenumber_ptr, struct dwarf2_debug *stash) { bfd_boolean line_p; bfd_boolean func_p; struct funcinfo *function; if (unit->error) return FALSE; if (! unit->line_table) { if (! unit->stmtlist) { unit->error = 1; return FALSE; } unit->line_table = decode_line_info (unit, stash); if (! unit->line_table) { unit->error = 1; return FALSE; } if (unit->first_child_die_ptr < unit->end_ptr && ! scan_unit_for_symbols (unit)) { unit->error = 1; return FALSE; } } function = NULL; func_p = lookup_address_in_function_table (unit, addr, &function, functionname_ptr); if (func_p && (function->tag == DW_TAG_inlined_subroutine)) stash->inliner_chain = function; line_p = lookup_address_in_line_info_table (unit->line_table, addr, filename_ptr, linenumber_ptr); return line_p || func_p; } /* Check to see if line info is already decoded in a comp_unit. If not, decode it. Returns TRUE if no errors were encountered; FALSE otherwise. */ static bfd_boolean comp_unit_maybe_decode_line_info (struct comp_unit *unit, struct dwarf2_debug *stash) { if (unit->error) return FALSE; if (! unit->line_table) { if (! unit->stmtlist) { unit->error = 1; return FALSE; } unit->line_table = decode_line_info (unit, stash); if (! unit->line_table) { unit->error = 1; return FALSE; } if (unit->first_child_die_ptr < unit->end_ptr && ! scan_unit_for_symbols (unit)) { unit->error = 1; return FALSE; } } return TRUE; } /* If UNIT contains SYM at ADDR, set the output parameters to the values for the line containing SYM. The output parameters, FILENAME_PTR, and LINENUMBER_PTR, are pointers to the objects to be filled in. Return TRUE if UNIT contains SYM, and no errors were encountered; FALSE otherwise. */ static bfd_boolean comp_unit_find_line (struct comp_unit *unit, asymbol *sym, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr, struct dwarf2_debug *stash) { if (!comp_unit_maybe_decode_line_info (unit, stash)) return FALSE; if (sym->flags & BSF_FUNCTION) return lookup_symbol_in_function_table (unit, sym, addr, filename_ptr, linenumber_ptr); return lookup_symbol_in_variable_table (unit, sym, addr, filename_ptr, linenumber_ptr); } static struct funcinfo * reverse_funcinfo_list (struct funcinfo *head) { struct funcinfo *rhead; struct funcinfo *temp; for (rhead = NULL; head; head = temp) { temp = head->prev_func; head->prev_func = rhead; rhead = head; } return rhead; } static struct varinfo * reverse_varinfo_list (struct varinfo *head) { struct varinfo *rhead; struct varinfo *temp; for (rhead = NULL; head; head = temp) { temp = head->prev_var; head->prev_var = rhead; rhead = head; } return rhead; } /* Extract all interesting funcinfos and varinfos of a compilation unit into hash tables for faster lookup. Returns TRUE if no errors were enountered; FALSE otherwise. */ static bfd_boolean comp_unit_hash_info (struct dwarf2_debug *stash, struct comp_unit *unit, struct info_hash_table *funcinfo_hash_table, struct info_hash_table *varinfo_hash_table) { struct funcinfo* each_func; struct varinfo* each_var; bfd_boolean okay = TRUE; BFD_ASSERT (stash->info_hash_status != STASH_INFO_HASH_DISABLED); if (!comp_unit_maybe_decode_line_info (unit, stash)) return FALSE; BFD_ASSERT (!unit->cached); /* To preserve the original search order, we went to visit the function infos in the reversed order of the list. However, making the list bi-directional use quite a bit of extra memory. So we reverse the list first, traverse the list in the now reversed order and finally reverse the list again to get back the original order. */ unit->function_table = reverse_funcinfo_list (unit->function_table); for (each_func = unit->function_table; each_func && okay; each_func = each_func->prev_func) { /* Skip nameless functions. */ if (each_func->name) /* There is no need to copy name string into hash table as name string is either in the dwarf string buffer or info in the stash. */ okay = insert_info_hash_table (funcinfo_hash_table, each_func->name, (void*) each_func, FALSE); } unit->function_table = reverse_funcinfo_list (unit->function_table); if (!okay) return FALSE; /* We do the same for variable infos. */ unit->variable_table = reverse_varinfo_list (unit->variable_table); for (each_var = unit->variable_table; each_var && okay; each_var = each_var->prev_var) { /* Skip stack vars and vars with no files or names. */ if (each_var->stack == 0 && each_var->file != NULL && each_var->name != NULL) /* There is no need to copy name string into hash table as name string is either in the dwarf string buffer or info in the stash. */ okay = insert_info_hash_table (varinfo_hash_table, each_var->name, (void*) each_var, FALSE); } unit->variable_table = reverse_varinfo_list (unit->variable_table); unit->cached = TRUE; return okay; } /* Locate a section in a BFD containing debugging info. The search starts from the section after AFTER_SEC, or from the first section in the BFD if AFTER_SEC is NULL. The search works by examining the names of the sections. There are two permissiable names. The first is .debug_info. This is the standard DWARF2 name. The second is a prefix .gnu.linkonce.wi. This is a variation on the .debug_info section which has a checksum describing the contents appended onto the name. This allows the linker to identify and discard duplicate debugging sections for different compilation units. */ #define DWARF2_DEBUG_INFO ".debug_info" #define DWARF2_COMPRESSED_DEBUG_INFO ".zdebug_info" #define GNU_LINKONCE_INFO ".gnu.linkonce.wi." static asection * find_debug_info (bfd *abfd, asection *after_sec) { asection * msec; msec = after_sec != NULL ? after_sec->next : abfd->sections; while (msec) { if (strcmp (msec->name, DWARF2_DEBUG_INFO) == 0) return msec; if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0) return msec; if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO)) return msec; msec = msec->next; } return NULL; } /* Unset vmas for adjusted sections in STASH. */ static void unset_sections (struct dwarf2_debug *stash) { unsigned int i; struct adjusted_section *p; i = stash->adjusted_section_count; p = stash->adjusted_sections; for (; i > 0; i--, p++) p->section->vma = 0; } /* Set unique VMAs for loadable and DWARF sections in ABFD and save VMAs in STASH for unset_sections. */ static bfd_boolean place_sections (bfd *abfd, struct dwarf2_debug *stash) { struct adjusted_section *p; unsigned int i; if (stash->adjusted_section_count != 0) { i = stash->adjusted_section_count; p = stash->adjusted_sections; for (; i > 0; i--, p++) p->section->vma = p->adj_vma; } else { asection *sect; bfd_vma last_vma = 0, last_dwarf = 0; bfd_size_type amt; i = 0; for (sect = abfd->sections; sect != NULL; sect = sect->next) { bfd_size_type sz; int is_debug_info; if (sect->vma != 0) continue; /* We need to adjust the VMAs of any .debug_info sections. Skip compressed ones, since no relocations could target them - they should not appear in object files anyway. */ if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0) is_debug_info = 1; else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO)) is_debug_info = 1; else is_debug_info = 0; if (!is_debug_info && (sect->flags & SEC_LOAD) == 0) continue; sz = sect->rawsize ? sect->rawsize : sect->size; if (sz == 0) continue; i++; } amt = i * sizeof (struct adjusted_section); p = (struct adjusted_section *) bfd_zalloc (abfd, amt); if (! p) return FALSE; stash->adjusted_sections = p; stash->adjusted_section_count = i; for (sect = abfd->sections; sect != NULL; sect = sect->next) { bfd_size_type sz; int is_debug_info; if (sect->vma != 0) continue; /* We need to adjust the VMAs of any .debug_info sections. Skip compressed ones, since no relocations could target them - they should not appear in object files anyway. */ if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0) is_debug_info = 1; else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO)) is_debug_info = 1; else is_debug_info = 0; if (!is_debug_info && (sect->flags & SEC_LOAD) == 0) continue; sz = sect->rawsize ? sect->rawsize : sect->size; if (sz == 0) continue; p->section = sect; if (is_debug_info) { BFD_ASSERT (sect->alignment_power == 0); sect->vma = last_dwarf; last_dwarf += sz; } else if (last_vma != 0) { /* Align the new address to the current section alignment. */ last_vma = ((last_vma + ~((bfd_vma) -1 << sect->alignment_power)) & ((bfd_vma) -1 << sect->alignment_power)); sect->vma = last_vma; last_vma += sect->vma + sz; } else last_vma += sect->vma + sz; p->adj_vma = sect->vma; p++; } } return TRUE; } /* Look up a funcinfo by name using the given info hash table. If found, also update the locations pointed to by filename_ptr and linenumber_ptr. This function returns TRUE if a funcinfo that matches the given symbol and address is found with any error; otherwise it returns FALSE. */ static bfd_boolean info_hash_lookup_funcinfo (struct info_hash_table *hash_table, asymbol *sym, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr) { struct funcinfo* each_func; struct funcinfo* best_fit = NULL; struct info_list_node *node; struct arange *arange; const char *name = bfd_asymbol_name (sym); asection *sec = bfd_get_section (sym); for (node = lookup_info_hash_table (hash_table, name); node; node = node->next) { each_func = (struct funcinfo *) node->info; for (arange = &each_func->arange; arange; arange = arange->next) { if ((!each_func->sec || each_func->sec == sec) && addr >= arange->low && addr < arange->high && (!best_fit || ((arange->high - arange->low) < (best_fit->arange.high - best_fit->arange.low)))) best_fit = each_func; } } if (best_fit) { best_fit->sec = sec; *filename_ptr = best_fit->file; *linenumber_ptr = best_fit->line; return TRUE; } return FALSE; } /* Look up a varinfo by name using the given info hash table. If found, also update the locations pointed to by filename_ptr and linenumber_ptr. This function returns TRUE if a varinfo that matches the given symbol and address is found with any error; otherwise it returns FALSE. */ static bfd_boolean info_hash_lookup_varinfo (struct info_hash_table *hash_table, asymbol *sym, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr) { const char *name = bfd_asymbol_name (sym); asection *sec = bfd_get_section (sym); struct varinfo* each; struct info_list_node *node; for (node = lookup_info_hash_table (hash_table, name); node; node = node->next) { each = (struct varinfo *) node->info; if (each->addr == addr && (!each->sec || each->sec == sec)) { each->sec = sec; *filename_ptr = each->file; *linenumber_ptr = each->line; return TRUE; } } return FALSE; } /* Update the funcinfo and varinfo info hash tables if they are not up to date. Returns TRUE if there is no error; otherwise returns FALSE and disable the info hash tables. */ static bfd_boolean stash_maybe_update_info_hash_tables (struct dwarf2_debug *stash) { struct comp_unit *each; /* Exit if hash tables are up-to-date. */ if (stash->all_comp_units == stash->hash_units_head) return TRUE; if (stash->hash_units_head) each = stash->hash_units_head->prev_unit; else each = stash->last_comp_unit; while (each) { if (!comp_unit_hash_info (stash, each, stash->funcinfo_hash_table, stash->varinfo_hash_table)) { stash->info_hash_status = STASH_INFO_HASH_DISABLED; return FALSE; } each = each->prev_unit; } stash->hash_units_head = stash->all_comp_units; return TRUE; } /* Check consistency of info hash tables. This is for debugging only. */ static void ATTRIBUTE_UNUSED stash_verify_info_hash_table (struct dwarf2_debug *stash) { struct comp_unit *each_unit; struct funcinfo *each_func; struct varinfo *each_var; struct info_list_node *node; bfd_boolean found; for (each_unit = stash->all_comp_units; each_unit; each_unit = each_unit->next_unit) { for (each_func = each_unit->function_table; each_func; each_func = each_func->prev_func) { if (!each_func->name) continue; node = lookup_info_hash_table (stash->funcinfo_hash_table, each_func->name); BFD_ASSERT (node); found = FALSE; while (node && !found) { found = node->info == each_func; node = node->next; } BFD_ASSERT (found); } for (each_var = each_unit->variable_table; each_var; each_var = each_var->prev_var) { if (!each_var->name || !each_var->file || each_var->stack) continue; node = lookup_info_hash_table (stash->varinfo_hash_table, each_var->name); BFD_ASSERT (node); found = FALSE; while (node && !found) { found = node->info == each_var; node = node->next; } BFD_ASSERT (found); } } } /* Check to see if we want to enable the info hash tables, which consume quite a bit of memory. Currently we only check the number times bfd_dwarf2_find_line is called. In the future, we may also want to take the number of symbols into account. */ static void stash_maybe_enable_info_hash_tables (bfd *abfd, struct dwarf2_debug *stash) { BFD_ASSERT (stash->info_hash_status == STASH_INFO_HASH_OFF); if (stash->info_hash_count++ < STASH_INFO_HASH_TRIGGER) return; /* FIXME: Maybe we should check the reduce_memory_overheads and optimize fields in the bfd_link_info structure ? */ /* Create hash tables. */ stash->funcinfo_hash_table = create_info_hash_table (abfd); stash->varinfo_hash_table = create_info_hash_table (abfd); if (!stash->funcinfo_hash_table || !stash->varinfo_hash_table) { /* Turn off info hashes if any allocation above fails. */ stash->info_hash_status = STASH_INFO_HASH_DISABLED; return; } /* We need a forced update so that the info hash tables will be created even though there is no compilation unit. That happens if STASH_INFO_HASH_TRIGGER is 0. */ stash_maybe_update_info_hash_tables (stash); stash->info_hash_status = STASH_INFO_HASH_ON; } /* Find the file and line associated with a symbol and address using the info hash tables of a stash. If there is a match, the function returns TRUE and update the locations pointed to by filename_ptr and linenumber_ptr; otherwise it returns FALSE. */ static bfd_boolean stash_find_line_fast (struct dwarf2_debug *stash, asymbol *sym, bfd_vma addr, const char **filename_ptr, unsigned int *linenumber_ptr) { BFD_ASSERT (stash->info_hash_status == STASH_INFO_HASH_ON); if (sym->flags & BSF_FUNCTION) return info_hash_lookup_funcinfo (stash->funcinfo_hash_table, sym, addr, filename_ptr, linenumber_ptr); return info_hash_lookup_varinfo (stash->varinfo_hash_table, sym, addr, filename_ptr, linenumber_ptr); } /* Find the source code location of SYMBOL. If SYMBOL is NULL then find the nearest source code location corresponding to the address SECTION + OFFSET. Returns TRUE if the line is found without error and fills in FILENAME_PTR and LINENUMBER_PTR. In the case where SYMBOL was NULL the FUNCTIONNAME_PTR is also filled in. SYMBOLS contains the symbol table for ABFD. ADDR_SIZE is the number of bytes in the initial .debug_info length field and in the abbreviation offset, or zero to indicate that the default value should be used. */ static bfd_boolean find_line (bfd *abfd, asection *section, bfd_vma offset, asymbol *symbol, asymbol **symbols, const char **filename_ptr, const char **functionname_ptr, unsigned int *linenumber_ptr, unsigned int addr_size, void **pinfo) { /* Read each compilation unit from the section .debug_info, and check to see if it contains the address we are searching for. If yes, lookup the address, and return the line number info. If no, go on to the next compilation unit. We keep a list of all the previously read compilation units, and a pointer to the next un-read compilation unit. Check the previously read units before reading more. */ struct dwarf2_debug *stash; /* What address are we looking for? */ bfd_vma addr; struct comp_unit* each; bfd_vma found = FALSE; bfd_boolean do_line; stash = (struct dwarf2_debug *) *pinfo; if (! stash) { bfd_size_type amt = sizeof (struct dwarf2_debug); stash = (struct dwarf2_debug *) bfd_zalloc (abfd, amt); if (! stash) return FALSE; } /* In a relocatable file, 2 functions may have the same address. We change the section vma so that they won't overlap. */ if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0) { if (! place_sections (abfd, stash)) return FALSE; } do_line = (section == NULL && offset == 0 && functionname_ptr == NULL && symbol != NULL); if (do_line) { addr = symbol->value; section = bfd_get_section (symbol); } else if (section != NULL && functionname_ptr != NULL && symbol == NULL) addr = offset; else abort (); if (section->output_section) addr += section->output_section->vma + section->output_offset; else addr += section->vma; *filename_ptr = NULL; if (! do_line) *functionname_ptr = NULL; *linenumber_ptr = 0; if (! *pinfo) { bfd *debug_bfd; bfd_size_type total_size; asection *msec; *pinfo = stash; msec = find_debug_info (abfd, NULL); if (msec == NULL) { char * debug_filename = bfd_follow_gnu_debuglink (abfd, DEBUGDIR); if (debug_filename == NULL) /* No dwarf2 info, and no gnu_debuglink to follow. Note that at this point the stash has been allocated, but contains zeros. This lets future calls to this function fail more quickly. */ goto done; if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL || ! bfd_check_format (debug_bfd, bfd_object) || (msec = find_debug_info (debug_bfd, NULL)) == NULL) { if (debug_bfd) bfd_close (debug_bfd); /* FIXME: Should we report our failure to follow the debuglink ? */ free (debug_filename); goto done; } } else debug_bfd = abfd; /* There can be more than one DWARF2 info section in a BFD these days. First handle the easy case when there's only one. If there's more than one, try case two: none of the sections is compressed. In that case, read them all in and produce one large stash. We do this in two passes - in the first pass we just accumulate the section sizes, and in the second pass we read in the section's contents. (The allows us to avoid reallocing the data as we add sections to the stash.) If some or all sections are compressed, then do things the slow way, with a bunch of reallocs. */ if (! find_debug_info (debug_bfd, msec)) { /* Case 1: only one info section. */ total_size = msec->size; if (! read_section (debug_bfd, debug_info, symbols, 0, &stash->info_ptr_memory, &total_size)) goto done; } else { /* Case 2: multiple sections. */ for (total_size = 0; msec; msec = find_debug_info (debug_bfd, msec)) total_size += msec->size; stash->info_ptr_memory = (bfd_byte *) bfd_malloc (total_size); if (stash->info_ptr_memory == NULL) goto done; total_size = 0; for (msec = find_debug_info (debug_bfd, NULL); msec; msec = find_debug_info (debug_bfd, msec)) { bfd_size_type size; size = msec->size; if (size == 0) continue; if (!(bfd_simple_get_relocated_section_contents (debug_bfd, msec, stash->info_ptr_memory + total_size, symbols))) goto done; total_size += size; } } stash->info_ptr = stash->info_ptr_memory; stash->info_ptr_end = stash->info_ptr + total_size; stash->sec = find_debug_info (debug_bfd, NULL); stash->sec_info_ptr = stash->info_ptr; stash->syms = symbols; stash->bfd_ptr = debug_bfd; } /* A null info_ptr indicates that there is no dwarf2 info (or that an error occured while setting up the stash). */ if (! stash->info_ptr) goto done; stash->inliner_chain = NULL; /* Check the previously read comp. units first. */ if (do_line) { /* The info hash tables use quite a bit of memory. We may not want to always use them. We use some heuristics to decide if and when to turn it on. */ if (stash->info_hash_status == STASH_INFO_HASH_OFF) stash_maybe_enable_info_hash_tables (abfd, stash); /* Keep info hash table up to date if they are available. Note that we may disable the hash tables if there is any error duing update. */ if (stash->info_hash_status == STASH_INFO_HASH_ON) stash_maybe_update_info_hash_tables (stash); if (stash->info_hash_status == STASH_INFO_HASH_ON) { found = stash_find_line_fast (stash, symbol, addr, filename_ptr, linenumber_ptr); if (found) goto done; } else { /* Check the previously read comp. units first. */ for (each = stash->all_comp_units; each; each = each->next_unit) if ((symbol->flags & BSF_FUNCTION) == 0 || comp_unit_contains_address (each, addr)) { found = comp_unit_find_line (each, symbol, addr, filename_ptr, linenumber_ptr, stash); if (found) goto done; } } } else { for (each = stash->all_comp_units; each; each = each->next_unit) { found = (comp_unit_contains_address (each, addr) && comp_unit_find_nearest_line (each, addr, filename_ptr, functionname_ptr, linenumber_ptr, stash)); if (found) goto done; } } /* The DWARF2 spec says that the initial length field, and the offset of the abbreviation table, should both be 4-byte values. However, some compilers do things differently. */ if (addr_size == 0) addr_size = 4; BFD_ASSERT (addr_size == 4 || addr_size == 8); /* Read each remaining comp. units checking each as they are read. */ while (stash->info_ptr < stash->info_ptr_end) { bfd_vma length; unsigned int offset_size = addr_size; bfd_byte *info_ptr_unit = stash->info_ptr; length = read_4_bytes (stash->bfd_ptr, stash->info_ptr); /* A 0xffffff length is the DWARF3 way of indicating we use 64-bit offsets, instead of 32-bit offsets. */ if (length == 0xffffffff) { offset_size = 8; length = read_8_bytes (stash->bfd_ptr, stash->info_ptr + 4); stash->info_ptr += 12; } /* A zero length is the IRIX way of indicating 64-bit offsets, mostly because the 64-bit length will generally fit in 32 bits, and the endianness helps. */ else if (length == 0) { offset_size = 8; length = read_4_bytes (stash->bfd_ptr, stash->info_ptr + 4); stash->info_ptr += 8; } /* In the absence of the hints above, we assume 32-bit DWARF2 offsets even for targets with 64-bit addresses, because: a) most of the time these targets will not have generated more than 2Gb of debug info and so will not need 64-bit offsets, and b) if they do use 64-bit offsets but they are not using the size hints that are tested for above then they are not conforming to the DWARF3 standard anyway. */ else if (addr_size == 8) { offset_size = 4; stash->info_ptr += 4; } else stash->info_ptr += 4; if (length > 0) { each = parse_comp_unit (stash, length, info_ptr_unit, offset_size); if (!each) /* The dwarf information is damaged, don't trust it any more. */ break; stash->info_ptr += length; if (stash->all_comp_units) stash->all_comp_units->prev_unit = each; else stash->last_comp_unit = each; each->next_unit = stash->all_comp_units; stash->all_comp_units = each; /* DW_AT_low_pc and DW_AT_high_pc are optional for compilation units. If we don't have them (i.e., unit->high == 0), we need to consult the line info table to see if a compilation unit contains the given address. */ if (do_line) found = (((symbol->flags & BSF_FUNCTION) == 0 || each->arange.high == 0 || comp_unit_contains_address (each, addr)) && comp_unit_find_line (each, symbol, addr, filename_ptr, linenumber_ptr, stash)); else found = ((each->arange.high == 0 || comp_unit_contains_address (each, addr)) && comp_unit_find_nearest_line (each, addr, filename_ptr, functionname_ptr, linenumber_ptr, stash)); if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr) == stash->sec->size) { stash->sec = find_debug_info (stash->bfd_ptr, stash->sec); stash->sec_info_ptr = stash->info_ptr; } if (found) goto done; } } done: if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0) unset_sections (stash); return found; } /* The DWARF2 version of find_nearest_line. Return TRUE if the line is found without error. */ bfd_boolean _bfd_dwarf2_find_nearest_line (bfd *abfd, asection *section, asymbol **symbols, bfd_vma offset, const char **filename_ptr, const char **functionname_ptr, unsigned int *linenumber_ptr, unsigned int addr_size, void **pinfo) { return find_line (abfd, section, offset, NULL, symbols, filename_ptr, functionname_ptr, linenumber_ptr, addr_size, pinfo); } /* The DWARF2 version of find_line. Return TRUE if the line is found without error. */ bfd_boolean _bfd_dwarf2_find_line (bfd *abfd, asymbol **symbols, asymbol *symbol, const char **filename_ptr, unsigned int *linenumber_ptr, unsigned int addr_size, void **pinfo) { return find_line (abfd, NULL, 0, symbol, symbols, filename_ptr, NULL, linenumber_ptr, addr_size, pinfo); } bfd_boolean _bfd_dwarf2_find_inliner_info (bfd *abfd ATTRIBUTE_UNUSED, const char **filename_ptr, const char **functionname_ptr, unsigned int *linenumber_ptr, void **pinfo) { struct dwarf2_debug *stash; stash = (struct dwarf2_debug *) *pinfo; if (stash) { struct funcinfo *func = stash->inliner_chain; if (func && func->caller_func) { *filename_ptr = func->caller_file; *functionname_ptr = func->caller_func->name; *linenumber_ptr = func->caller_line; stash->inliner_chain = func->caller_func; return TRUE; } } return FALSE; } void _bfd_dwarf2_cleanup_debug_info (bfd *abfd) { struct comp_unit *each; struct dwarf2_debug *stash; if (abfd == NULL || elf_tdata (abfd) == NULL) return; stash = (struct dwarf2_debug *) elf_tdata (abfd)->dwarf2_find_line_info; if (stash == NULL) return; for (each = stash->all_comp_units; each; each = each->next_unit) { struct abbrev_info **abbrevs = each->abbrevs; struct funcinfo *function_table = each->function_table; struct varinfo *variable_table = each->variable_table; size_t i; for (i = 0; i < ABBREV_HASH_SIZE; i++) { struct abbrev_info *abbrev = abbrevs[i]; while (abbrev) { free (abbrev->attrs); abbrev = abbrev->next; } } if (each->line_table) { free (each->line_table->dirs); free (each->line_table->files); } while (function_table) { if (function_table->file) { free (function_table->file); function_table->file = NULL; } if (function_table->caller_file) { free (function_table->caller_file); function_table->caller_file = NULL; } function_table = function_table->prev_func; } while (variable_table) { if (variable_table->file) { free (variable_table->file); variable_table->file = NULL; } variable_table = variable_table->prev_var; } } if (stash->dwarf_abbrev_buffer) free (stash->dwarf_abbrev_buffer); if (stash->dwarf_line_buffer) free (stash->dwarf_line_buffer); if (stash->dwarf_str_buffer) free (stash->dwarf_str_buffer); if (stash->dwarf_ranges_buffer) free (stash->dwarf_ranges_buffer); if (stash->info_ptr_memory) free (stash->info_ptr_memory); }
Go to most recent revision | Compare with Previous | Blame | View Log