Subversion Repositories open8_urisc

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
        $(top_srcdir)/../config/zlib.m4 \
        $(top_srcdir)/../bfd/warning.m4 \
        $(top_srcdir)/../config/depstand.m4 \
        $(top_srcdir)/../config/gettext-sister.m4 \
        $(top_srcdir)/../config/iconv.m4 \
        $(top_srcdir)/../config/largefile.m4 \
        $(top_srcdir)/../config/lead-dot.m4 \
        $(top_srcdir)/../config/lib-ld.m4 \
        $(top_srcdir)/../config/lib-link.m4 \
        $(top_srcdir)/../config/lib-prefix.m4 \
        $(top_srcdir)/../config/nls.m4 \
        $(top_srcdir)/../config/override.m4 \
        $(top_srcdir)/../config/plugins.m4 \
        $(top_srcdir)/../config/po.m4 \
        $(top_srcdir)/../config/progtest.m4 \
        $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
        $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
        $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
INFO_DEPS = binutils.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = binutils.dvi
PDFS = binutils.pdf
PSS = binutils.ps
HTMLS = binutils.html
TEXINFOS = binutils.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man_MANS)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_DLLTOOL = @BUILD_DLLTOOL@
BUILD_DLLWRAP = @BUILD_DLLWRAP@
BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
BUILD_MISC = @BUILD_MISC@
BUILD_NLMCONV = @BUILD_NLMCONV@
BUILD_SRCONV = @BUILD_SRCONV@
BUILD_WINDMC = @BUILD_WINDMC@
BUILD_WINDRES = @BUILD_WINDRES@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEMANGLER_NAME = @DEMANGLER_NAME@
DEPDIR = @DEPDIR@
DLLTOOL_DEFS = @DLLTOOL_DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMULATION = @EMULATION@
EMULATION_VECTOR = @EMULATION_VECTOR@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NLMCONV_DEFS = @NLMCONV_DEFS@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJDUMP_DEFS = @OBJDUMP_DEFS@
OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = cygnus

# What version of the manual you want; "all" includes everything
CONFIG = all

# Options to extract the man page from as.texinfo
MANCONF = -Dman
TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
POD2MAN = pod2man --center="GNU Development Tools" \
         --release="binutils-$(VERSION)" --section=1


# List of man pages generated from binutils.texi
man_MANS = \
        addr2line.1 \
        ar.1 \
        dlltool.1 \
        nlmconv.1 \
        nm.1 \
        objcopy.1 \
        objdump.1 \
        ranlib.1 \
        readelf.1 \
        size.1 \
        strings.1 \
        strip.1 \
        elfedit.1 \
        windres.1 \
        windmc.1 \
        $(DEMANGLER_NAME).1

info_TEXINFOS = binutils.texi
binutils_TEXI = $(srcdir)/binutils.texi
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
                   -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc

TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
                    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc

MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
MAINTAINERCLEANFILES = binutils.info

# Automake 1.9 will only build info files in the objdir if they are
# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
# though, so we use a bogus condition.
@GENINSRC_NEVER_TRUE@DISTCLEANFILES = binutils.info
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
        $(am__cd) $(top_srcdir) && \
          $(AUTOMAKE) --foreign doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
        -rm -f *.lo

clean-libtool:
        -rm -rf .libs _libs

binutils.info: binutils.texi 
        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
        rm -rf $$backupdir && mkdir $$backupdir && \
        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
          done; \
        else :; fi && \
        if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
         -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
        then \
          rc=0; \
        else \
          rc=$$?; \
          $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
        fi; \
        rm -rf $$backupdir; exit $$rc

binutils.dvi: binutils.texi  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
        $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi

binutils.pdf: binutils.texi  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
        $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi

binutils.html: binutils.texi  
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
         -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
            mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
        else \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
.dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<

uninstall-dvi-am:
        @$(NORMAL_UNINSTALL)
        @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
          rm -f "$(DESTDIR)$(dvidir)/$$f"; \
        done

uninstall-html-am:
        @$(NORMAL_UNINSTALL)
        @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
          rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
        done

uninstall-info-am:
        @$(PRE_UNINSTALL)
        @if test -d '$(DESTDIR)$(infodir)' && \
            (install-info --version && \
             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
          list='$(INFO_DEPS)'; \
          for file in $$list; do \
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
            echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
            if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
            then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
          done; \
        else :; fi
        @$(NORMAL_UNINSTALL)
        @list='$(INFO_DEPS)'; \
        for file in $$list; do \
          relfile=`echo "$$file" | sed 's|^.*/||'`; \
          relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
          (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
             echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
             rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
           else :; fi); \
        done

uninstall-pdf-am:
        @$(NORMAL_UNINSTALL)
        @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
          rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
        done

uninstall-ps-am:
        @$(NORMAL_UNINSTALL)
        @list='$(PSS)'; test -n "$(psdir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
          rm -f "$(DESTDIR)$(psdir)/$$f"; \
        done

dist-info: $(INFO_DEPS)
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        list='$(INFO_DEPS)'; \
        for base in $$list; do \
          case $$base in \
            $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
          esac; \
          if test -f $$base; then d=.; else d=$(srcdir); fi; \
          base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
          for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
            if test -f $$file; then \
              relfile=`expr "$$file" : "$$d/\(.*\)"`; \
              test -f "$(distdir)/$$relfile" || \
                cp -p $$file "$(distdir)/$$relfile"; \
            else :; fi; \
          done; \
        done

mostlyclean-aminfo:
        -rm -rf binutils.aux binutils.cp binutils.cps binutils.fn binutils.fns \
          binutils.ky binutils.log binutils.pg binutils.pgs \
          binutils.tmp binutils.toc binutils.tp binutils.tps \
          binutils.vr binutils.vrs

clean-aminfo:
        -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
        || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html

maintainer-clean-aminfo:
        @list='$(INFO_DEPS)'; for i in $$list; do \
          i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
          echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
          rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
        done

clean-info: mostlyclean-aminfo clean-aminfo
install-man1: $(man_MANS)
        @$(NORMAL_INSTALL)
        test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
        @list=''; test -n "$(man1dir)" || exit 0; \
        { for i in $$list; do echo "$$i"; done; \
        l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
          sed -n '/\.1[a-z]*$$/p'; \
        } | while read p; do \
          if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; echo "$$p"; \
        done | \
        sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
              -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
        sed 'N;N;s,\n, ,g' | { \
        list=; while read file base inst; do \
          if test "$$base" = "$$inst"; then list="$$list $$file"; else \
            echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
            $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
          fi; \
        done; \
        for i in $$list; do echo "$$i"; done | $(am__base_list) | \
        while read files; do \
          test -z "$$files" || { \
            echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
            $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
        done; }

uninstall-man1:
        @$(NORMAL_UNINSTALL)
        @list=''; test -n "$(man1dir)" || exit 0; \
        files=`{ for i in $$list; do echo "$$i"; done; \
        l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
          sed -n '/\.1[a-z]*$$/p'; \
        } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
              -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
        test -z "$$files" || { \
          echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
          cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

check-am:
check: check-am
all-am: Makefile $(MANS)
installdirs:
        for dir in "$(DESTDIR)$(man1dir)"; do \
          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
        -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
        -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
        -rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS) info-local

install-data-am: install-data-local install-man

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
        @$(NORMAL_INSTALL)
        test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
        @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
        done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
        @$(NORMAL_INSTALL)
        test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
        @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
        for p in $$list; do \
          if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
          $(am__strip_dir) \
          if test -d "$$d$$p"; then \
            echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
            $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
            echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
            $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
          else \
            list2="$$list2 $$d$$p"; \
          fi; \
        done; \
        test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
        done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
        @$(NORMAL_INSTALL)
        test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
        for file in $$list; do \
          case $$file in \
            $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
          esac; \
          if test -f $$file; then d=.; else d=$(srcdir); fi; \
          file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
          for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
            if test -f $$ifile; then \
              echo "$$ifile"; \
            else : ; fi; \
          done; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
        @$(POST_INSTALL)
        @if (install-info --version && \
             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
          list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
          for file in $$list; do \
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
            echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
            install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
          done; \
        else : ; fi
install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
        @$(NORMAL_INSTALL)
        test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
        @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
        @$(NORMAL_INSTALL)
        test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
        @list='$(PSS)'; test -n "$(psdir)" || list=; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
        done | $(am__base_list) | \
        while read files; do \
          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
          $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
        maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
        mostlyclean-libtool

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
        uninstall-man uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
        clean-info clean-libtool dist-info distclean distclean-generic \
        distclean-libtool dvi dvi-am html html-am info info-am \
        info-local install install-am install-data install-data-am \
        install-data-local install-dvi install-dvi-am install-exec \
        install-exec-am install-html install-html-am install-info \
        install-info-am install-man install-man1 install-pdf \
        install-pdf-am install-ps install-ps-am install-strip \
        installcheck installcheck-am installdirs maintainer-clean \
        maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
        mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
        pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
        uninstall-html-am uninstall-info-am uninstall-man \
        uninstall-man1 uninstall-pdf-am uninstall-ps-am


# Man page generation from texinfo
addr2line.1:    $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
        -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f addr2line.pod

ar.1:   $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
        -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f ar.pod

dlltool.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
        -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f dlltool.pod

nlmconv.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dnlmconv < $(binutils_TEXI) > nlmconv.pod
        -($(POD2MAN) nlmconv.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f nlmconv.pod

nm.1:   $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
        -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f nm.pod

objcopy.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
        -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f objcopy.pod

objdump.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
        -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f objdump.pod

ranlib.1:       $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
        -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f ranlib.pod

readelf.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
        -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f readelf.pod

size.1: $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
        -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f size.pod

strings.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
        -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f strings.pod

strip.1:        $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
        -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f strip.pod

elfedit.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
        -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f elfedit.pod

windres.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
        -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f windres.pod

windmc.1:       $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
        -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f windmc.pod

cxxfilt.man:    $(binutils_TEXI) $(binutils_TEXINFOS)
        touch $@
        -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
        -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
                mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
        rm -f $(DEMANGLER_NAME).pod

$(DEMANGLER_NAME).1: cxxfilt.man Makefile
        if test -f cxxfilt.man; then \
          man=cxxfilt.man; \
        else \
          man=$(srcdir)/cxxfilt.man; \
        fi; \
        sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
            -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
                > $(DEMANGLER_NAME).1

# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install-data-local: install-info

# Maintenance

# We need it for the taz target in ../../Makefile.in.
info-local: $(MANS)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: