URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [config/] [lib-link.m4] - Rev 144
Go to most recent revision | Compare with Previous | Blame | View Log
# lib-link.m4 serial 4 (gettext-0.12) dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes undefine([Name]) undefine([NAME]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. If found, it dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" LIBS="$LIBS $LIB[]NAME" AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, dnl hardcode_direct, hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib$1-prefix], [ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib --without-lib$1-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ])
Go to most recent revision | Compare with Previous | Blame | View Log