URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [gas/] [config/] [tc-avr.h] - Rev 136
Go to most recent revision | Compare with Previous | Blame | View Log
/* This file is tc-avr.h Copyright 1999, 2000, 2001, 2002, 2005, 2006, 2007 Free Software Foundation, Inc. Contributed by Denis Chertykov <denisc@overta.ru> This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ /* By convention, you should define this macro in the `.h' file. For example, `tc-m68k.h' defines `TC_M68K'. You might have to use this if it is necessary to add CPU specific code to the object format file. */ #define TC_AVR /* This macro is the BFD target name to use when creating the output file. This will normally depend upon the `OBJ_FMT' macro. */ #define TARGET_FORMAT "elf32-avr" /* This macro is the BFD architecture to pass to `bfd_set_arch_mach'. */ #define TARGET_ARCH bfd_arch_avr /* This macro is the BFD machine number to pass to `bfd_set_arch_mach'. If it is not defined, GAS will use 0. */ #define TARGET_MACH 0 /* You should define this macro to be non-zero if the target is big endian, and zero if the target is little endian. */ #define TARGET_BYTES_BIG_ENDIAN 0 /* If you define this macro, GAS will warn about the use of nonstandard escape sequences in a string. */ #define ONLY_STANDARD_ESCAPES /* GAS will call this function for any expression that can not be recognized. When the function is called, `input_line_pointer' will point to the start of the expression. */ #define md_operand(x) /* You may define this macro to parse an expression used in a data allocation pseudo-op such as `.word'. You can use this to recognize relocation directives that may appear in such directives. */ #define TC_PARSE_CONS_EXPRESSION(EXPR,N) avr_parse_cons_expression (EXPR, N) extern void avr_parse_cons_expression (expressionS *, int); /* You may define this macro to generate a fixup for a data allocation pseudo-op. */ #define TC_CONS_FIX_NEW(FRAG,WHERE,N,EXP) avr_cons_fix_new (FRAG, WHERE, N, EXP) extern void avr_cons_fix_new (fragS *,int, int, expressionS *); /* This should just call either `number_to_chars_bigendian' or `number_to_chars_littleendian', whichever is appropriate. On targets like the MIPS which support options to change the endianness, which function to call is a runtime decision. On other targets, `md_number_to_chars' can be a simple macro. */ #define md_number_to_chars number_to_chars_littleendian /* `md_short_jump_size' `md_long_jump_size' `md_create_short_jump' `md_create_long_jump' If `WORKING_DOT_WORD' is defined, GAS will not do broken word processing (*note Broken words::.). Otherwise, you should set `md_short_jump_size' to the size of a short jump (a jump that is just long enough to jump around a long jmp) and `md_long_jump_size' to the size of a long jump (a jump that can go anywhere in the function), You should define `md_create_short_jump' to create a short jump around a long jump, and define `md_create_long_jump' to create a long jump. */ #define WORKING_DOT_WORD /* If you define this macro, it means that `tc_gen_reloc' may return multiple relocation entries for a single fixup. In this case, the return value of `tc_gen_reloc' is a pointer to a null terminated array. */ #undef RELOC_EXPANSION_POSSIBLE /* No shared lib support, so we don't need to ensure externally visible symbols can be overridden. */ #define EXTERN_FORCE_RELOC 0 /* Values passed to md_apply_fix don't include the symbol value. */ #define MD_APPLY_SYM_VALUE(FIX) 0 /* If you define this macro, it should return the offset between the address of a PC relative fixup and the position from which the PC relative adjustment should be made. On many processors, the base of a PC relative instruction is the next instruction, so this macro would return the length of an instruction. */ #define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from_section (FIX, SEC) extern long md_pcrel_from_section (struct fix *, segT); /* The number of bytes to put into a word in a listing. This affects the way the bytes are clumped together in the listing. For example, a value of 2 might print `1234 5678' where a value of 1 would print `12 34 56 78'. The default value is 4. */ #define LISTING_WORD_SIZE 2 /* AVR port uses `$' as a logical line separator. */ #define LEX_DOLLAR 0 /* An `.lcomm' directive with no explicit alignment parameter will use this macro to set P2VAR to the alignment that a request for SIZE bytes will have. The alignment is expressed as a power of two. If no alignment should take place, the macro definition should do nothing. Some targets define a `.bss' directive that is also affected by this macro. The default definition will set P2VAR to the truncated power of two of sizes up to eight bytes. */ #define TC_IMPLICIT_LCOMM_ALIGNMENT(SIZE, P2VAR) (P2VAR) = 0 /* We don't want gas to fixup the following program memory related relocations. We will need them in case that we want to do linker relaxation. We could in principle keep these fixups in gas when not relaxing. However, there is no serious performance penilty when making the linker make the fixup work. Check also that fx_addsy is not NULL, in order to make sure that the fixup refers to some sort of lable. */ #define TC_VALIDATE_FIX(FIXP,SEG,SKIP) \ if ( (FIXP->fx_r_type == BFD_RELOC_AVR_7_PCREL \ || FIXP->fx_r_type == BFD_RELOC_AVR_13_PCREL \ || FIXP->fx_r_type == BFD_RELOC_AVR_LO8_LDI_PM \ || FIXP->fx_r_type == BFD_RELOC_AVR_LO8_LDI_GS \ || FIXP->fx_r_type == BFD_RELOC_AVR_HI8_LDI_PM \ || FIXP->fx_r_type == BFD_RELOC_AVR_HI8_LDI_GS \ || FIXP->fx_r_type == BFD_RELOC_AVR_HH8_LDI_PM \ || FIXP->fx_r_type == BFD_RELOC_AVR_LO8_LDI_PM_NEG \ || FIXP->fx_r_type == BFD_RELOC_AVR_HI8_LDI_PM_NEG \ || FIXP->fx_r_type == BFD_RELOC_AVR_HH8_LDI_PM_NEG \ || FIXP->fx_r_type == BFD_RELOC_AVR_16_PM) \ && (FIXP->fx_addsy)) \ { \ goto SKIP; \ } /* This target is buggy, and sets fix size too large. */ #define TC_FX_SIZE_SLACK(FIX) 2 /* AVR instructions are 2 or 4 bytes long. */ #define DWARF2_LINE_MIN_INSN_LENGTH 2 /* 32 bits pseudo-addresses are used on AVR. */ #define DWARF2_ADDR_SIZE(bfd) 4 /* Enable cfi directives. */ #define TARGET_USE_CFIPOP 1 /* The stack grows down, and is only byte aligned. */ #define DWARF2_CIE_DATA_ALIGNMENT -1 /* Define the column that represents the PC. */ #define DWARF2_DEFAULT_RETURN_COLUMN 36 /* Define a hook to setup initial CFI state. */ extern void tc_cfi_frame_initial_instructions (void); #define tc_cfi_frame_initial_instructions tc_cfi_frame_initial_instructions
Go to most recent revision | Compare with Previous | Blame | View Log