URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [gas/] [config/] [tc-tilepro.c] - Rev 166
Compare with Previous | Blame | View Log
/* tc-tilepro.c -- Assemble for a TILEPro chip. Copyright 2011 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #include "as.h" #include "struc-symbol.h" #include "subsegs.h" #include "elf/tilepro.h" #include "opcode/tilepro.h" #include "dwarf2dbg.h" #include "dw2gencfi.h" #include "safe-ctype.h" /* Special registers. */ #define TREG_IDN0 57 #define TREG_IDN1 58 #define TREG_UDN0 59 #define TREG_UDN1 60 #define TREG_UDN2 61 #define TREG_UDN3 62 #define TREG_ZERO 63 /* Generic assembler global variables which must be defined by all targets. */ /* Characters which always start a comment. */ const char comment_chars[] = "#"; /* Characters which start a comment at the beginning of a line. */ const char line_comment_chars[] = "#"; /* Characters which may be used to separate multiple commands on a single line. */ const char line_separator_chars[] = ";"; /* Characters which are used to indicate an exponent in a floating point number. */ const char EXP_CHARS[] = "eE"; /* Characters which mean that a number is a floating point constant, as in 0d1.0. */ const char FLT_CHARS[] = "rRsSfFdDxXpP"; const char *md_shortopts = "VQ:"; struct option md_longopts[] = { {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof (md_longopts); int md_parse_option (int c, char *arg ATTRIBUTE_UNUSED) { switch (c) { /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section should be emitted or not. FIXME: Not implemented. */ case 'Q': break; /* -V: SVR4 argument to print version ID. */ case 'V': print_version_id (); break; default: return 0; } return 1; } void md_show_usage (FILE *stream) { fprintf (stream, _("\ -Q ignored\n\ -V print assembler version number\n")); } /* Extra expression types. */ #define O_lo16 O_md1 #define O_hi16 O_md2 #define O_ha16 O_md3 #define O_got O_md4 #define O_got_lo16 O_md5 #define O_got_hi16 O_md6 #define O_got_ha16 O_md7 #define O_plt O_md8 #define O_tls_gd O_md9 #define O_tls_gd_lo16 O_md10 #define O_tls_gd_hi16 O_md11 #define O_tls_gd_ha16 O_md12 #define O_tls_ie O_md13 #define O_tls_ie_lo16 O_md14 #define O_tls_ie_hi16 O_md15 #define O_tls_ie_ha16 O_md16 #define O_tls_le O_md17 #define O_tls_le_lo16 O_md18 #define O_tls_le_hi16 O_md19 #define O_tls_le_ha16 O_md20 #define O_tls_gd_call O_md21 #define O_tls_gd_add O_md22 #define O_tls_ie_load O_md23 static struct hash_control *special_operator_hash; /* Hash tables for instruction mnemonic lookup. */ static struct hash_control *op_hash; /* Hash table for spr lookup. */ static struct hash_control *spr_hash; /* True temporarily while parsing an SPR expression. This changes the * namespace to include SPR names. */ static int parsing_spr; /* Are we currently inside `{ ... }'? */ static int inside_bundle; struct tilepro_instruction { const struct tilepro_opcode *opcode; tilepro_pipeline pipe; expressionS operand_values[TILEPRO_MAX_OPERANDS]; }; /* This keeps track of the current bundle being built up. */ static struct tilepro_instruction current_bundle[TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE]; /* Index in current_bundle for the next instruction to parse. */ static int current_bundle_index; /* Allow 'r63' in addition to 'zero', etc. Normally we disallow this as 'zero' is not a real register, so using it accidentally would be a nasty bug. For other registers, such as 'sp', code using multiple names for the same physical register is excessively confusing. The '.require_canonical_reg_names' pseudo-op turns this error on, and the '.no_require_canonical_reg_names' pseudo-op turns this off. By default the error is on. */ static int require_canonical_reg_names; /* Allow bundles that do undefined or suspicious things like write two different values to the same register at the same time. The '.no_allow_suspicious_bundles' pseudo-op turns this error on, and the '.allow_suspicious_bundles' pseudo-op turns this off. */ static int allow_suspicious_bundles; /* A hash table of main processor registers, mapping each register name to its index. Furthermore, if the register number is greater than the number of registers for that processor, the user used an illegal alias for that register (e.g. r63 instead of zero), so we should generate a warning. The attempted register number can be found by clearing NONCANONICAL_REG_NAME_FLAG. */ static struct hash_control *main_reg_hash; /* We cannot unambiguously store a 0 in a hash table and look it up, so we OR in this flag to every canonical register. */ #define CANONICAL_REG_NAME_FLAG 0x1000 /* By default we disallow register aliases like r63, but we record them in the hash table in case the .no_require_canonical_reg_names directive is used. Noncanonical names have this value added to them. */ #define NONCANONICAL_REG_NAME_FLAG 0x2000 /* Discards flags for register hash table entries and returns the reg number. */ #define EXTRACT_REGNO(p) ((p) & 63) /* This function is called once, at assembler startup time. It should set up all the tables, etc., that the MD part of the assembler will need. */ void md_begin (void) { const struct tilepro_opcode *op; int i; /* Guarantee text section is aligned. */ bfd_set_section_alignment (stdoutput, text_section, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES); require_canonical_reg_names = 1; allow_suspicious_bundles = 0; current_bundle_index = 0; inside_bundle = 0; /* Initialize special operator hash table. */ special_operator_hash = hash_new (); #define INSERT_SPECIAL_OP(name) \ hash_insert (special_operator_hash, #name, (void *)O_##name) INSERT_SPECIAL_OP(lo16); INSERT_SPECIAL_OP(hi16); INSERT_SPECIAL_OP(ha16); INSERT_SPECIAL_OP(got); INSERT_SPECIAL_OP(got_lo16); INSERT_SPECIAL_OP(got_hi16); INSERT_SPECIAL_OP(got_ha16); INSERT_SPECIAL_OP(plt); INSERT_SPECIAL_OP(tls_gd); INSERT_SPECIAL_OP(tls_gd_lo16); INSERT_SPECIAL_OP(tls_gd_hi16); INSERT_SPECIAL_OP(tls_gd_ha16); INSERT_SPECIAL_OP(tls_ie); INSERT_SPECIAL_OP(tls_ie_lo16); INSERT_SPECIAL_OP(tls_ie_hi16); INSERT_SPECIAL_OP(tls_ie_ha16); INSERT_SPECIAL_OP(tls_le); INSERT_SPECIAL_OP(tls_le_lo16); INSERT_SPECIAL_OP(tls_le_hi16); INSERT_SPECIAL_OP(tls_le_ha16); INSERT_SPECIAL_OP(tls_gd_call); INSERT_SPECIAL_OP(tls_gd_add); INSERT_SPECIAL_OP(tls_ie_load); #undef INSERT_SPECIAL_OP /* Initialize op_hash hash table. */ op_hash = hash_new (); for (op = &tilepro_opcodes[0]; op->name != NULL; op++) { const char *hash_err = hash_insert (op_hash, op->name, (void *)op); if (hash_err != NULL) { as_fatal (_("Internal Error: Can't hash %s: %s"), op->name, hash_err); } } /* Initialize the spr hash table. */ parsing_spr = 0; spr_hash = hash_new (); for (i = 0; i < tilepro_num_sprs; i++) hash_insert (spr_hash, tilepro_sprs[i].name, (void *) &tilepro_sprs[i]); /* Set up the main_reg_hash table. We use this instead of * creating a symbol in the register section to avoid ambiguities * with labels that have the same names as registers. */ main_reg_hash = hash_new (); for (i = 0; i < TILEPRO_NUM_REGISTERS; i++) { char buf[64]; hash_insert (main_reg_hash, tilepro_register_names[i], (void *) (long)(i | CANONICAL_REG_NAME_FLAG)); /* See if we should insert a noncanonical alias, like r63. */ sprintf (buf, "r%d", i); if (strcmp (buf, tilepro_register_names[i]) != 0) hash_insert (main_reg_hash, xstrdup (buf), (void *) (long)(i | NONCANONICAL_REG_NAME_FLAG)); } /* Insert obsolete backwards-compatibility register names. */ hash_insert (main_reg_hash, "io0", (void *) (long) (TREG_IDN0 | CANONICAL_REG_NAME_FLAG)); hash_insert (main_reg_hash, "io1", (void *) (long) (TREG_IDN1 | CANONICAL_REG_NAME_FLAG)); hash_insert (main_reg_hash, "us0", (void *) (long) (TREG_UDN0 | CANONICAL_REG_NAME_FLAG)); hash_insert (main_reg_hash, "us1", (void *) (long) (TREG_UDN1 | CANONICAL_REG_NAME_FLAG)); hash_insert (main_reg_hash, "us2", (void *) (long) (TREG_UDN2 | CANONICAL_REG_NAME_FLAG)); hash_insert (main_reg_hash, "us3", (void *) (long) (TREG_UDN3 | CANONICAL_REG_NAME_FLAG)); } #define BUNDLE_TEMPLATE_MASK(p0, p1, p2) \ ((p0) | ((p1) << 8) | ((p2) << 16)) #define BUNDLE_TEMPLATE(p0, p1, p2) \ { { (p0), (p1), (p2) }, \ BUNDLE_TEMPLATE_MASK(1 << (p0), 1 << (p1), (1 << (p2))) \ } #define NO_PIPELINE TILEPRO_NUM_PIPELINE_ENCODINGS struct bundle_template { tilepro_pipeline pipe[TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE]; unsigned int pipe_mask; }; static const struct bundle_template bundle_templates[] = { /* In Y format we must always have something in Y2, since it has * no fnop, so this conveys that Y2 must always be used. */ BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y0, TILEPRO_PIPELINE_Y2, NO_PIPELINE), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y1, TILEPRO_PIPELINE_Y2, NO_PIPELINE), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y2, TILEPRO_PIPELINE_Y0, NO_PIPELINE), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y2, TILEPRO_PIPELINE_Y1, NO_PIPELINE), /* Y format has three instructions. */ BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y0, TILEPRO_PIPELINE_Y1, TILEPRO_PIPELINE_Y2), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y0, TILEPRO_PIPELINE_Y2, TILEPRO_PIPELINE_Y1), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y1, TILEPRO_PIPELINE_Y0, TILEPRO_PIPELINE_Y2), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y1, TILEPRO_PIPELINE_Y2, TILEPRO_PIPELINE_Y0), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y2, TILEPRO_PIPELINE_Y0, TILEPRO_PIPELINE_Y1), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_Y2, TILEPRO_PIPELINE_Y1, TILEPRO_PIPELINE_Y0), /* X format has only two instructions. */ BUNDLE_TEMPLATE(TILEPRO_PIPELINE_X0, TILEPRO_PIPELINE_X1, NO_PIPELINE), BUNDLE_TEMPLATE(TILEPRO_PIPELINE_X1, TILEPRO_PIPELINE_X0, NO_PIPELINE) }; static void prepend_nop_to_bundle (tilepro_mnemonic mnemonic) { memmove (¤t_bundle[1], ¤t_bundle[0], current_bundle_index * sizeof current_bundle[0]); current_bundle[0].opcode = &tilepro_opcodes[mnemonic]; ++current_bundle_index; } static tilepro_bundle_bits insert_operand (tilepro_bundle_bits bits, const struct tilepro_operand *operand, int operand_value, char *file, unsigned lineno) { /* Range-check the immediate. */ int num_bits = operand->num_bits; operand_value >>= operand->rightshift; if (bfd_check_overflow (operand->is_signed ? complain_overflow_signed : complain_overflow_unsigned, num_bits, 0, bfd_arch_bits_per_address (stdoutput), operand_value) != bfd_reloc_ok) { offsetT min, max; if (operand->is_signed) { min = -(1 << (num_bits - 1)); max = (1 << (num_bits - 1)) - 1; } else { min = 0; max = (1 << num_bits) - 1; } as_bad_value_out_of_range (_("operand"), operand_value, min, max, file, lineno); } /* Write out the bits for the immediate. */ return bits | operand->insert (operand_value); } static int apply_special_operator (operatorT op, int num) { switch (op) { case O_lo16: return (signed short)num; case O_hi16: return (signed short)(num >> 16); case O_ha16: return (signed short)((num + 0x8000) >> 16); default: abort (); } } static tilepro_bundle_bits emit_tilepro_instruction (tilepro_bundle_bits bits, int num_operands, const unsigned char *operands, expressionS *operand_values, char *bundle_start) { int i; for (i = 0; i < num_operands; i++) { const struct tilepro_operand *operand = &tilepro_operands[operands[i]]; expressionS *operand_exp = &operand_values[i]; int is_pc_relative = operand->is_pc_relative; if (operand_exp->X_op == O_register || (operand_exp->X_op == O_constant && !is_pc_relative)) { /* We know what the bits are right now, so insert them. */ bits = insert_operand (bits, operand, operand_exp->X_add_number, NULL, 0); } else { bfd_reloc_code_real_type reloc = operand->default_reloc; expressionS subexp; int die = 0, use_subexp = 0, require_symbol = 0; fixS *fixP; /* Take an expression like hi16(x) and turn it into x with a different reloc type. */ switch (operand_exp->X_op) { #define HANDLE_OP16(suffix) \ switch (reloc) \ { \ case BFD_RELOC_TILEPRO_IMM16_X0: \ reloc = BFD_RELOC_TILEPRO_IMM16_X0_##suffix; \ break; \ case BFD_RELOC_TILEPRO_IMM16_X1: \ reloc = BFD_RELOC_TILEPRO_IMM16_X1_##suffix; \ break; \ default: \ die = 1; \ break; \ } \ use_subexp = 1 case O_lo16: HANDLE_OP16 (LO); break; case O_hi16: HANDLE_OP16 (HI); break; case O_ha16: HANDLE_OP16 (HA); break; case O_got: HANDLE_OP16 (GOT); require_symbol = 1; break; case O_got_lo16: HANDLE_OP16 (GOT_LO); require_symbol = 1; break; case O_got_hi16: HANDLE_OP16 (GOT_HI); require_symbol = 1; break; case O_got_ha16: HANDLE_OP16 (GOT_HA); require_symbol = 1; break; case O_tls_gd: HANDLE_OP16 (TLS_GD); require_symbol = 1; break; case O_tls_gd_lo16: HANDLE_OP16 (TLS_GD_LO); require_symbol = 1; break; case O_tls_gd_hi16: HANDLE_OP16 (TLS_GD_HI); require_symbol = 1; break; case O_tls_gd_ha16: HANDLE_OP16 (TLS_GD_HA); require_symbol = 1; break; case O_tls_ie: HANDLE_OP16 (TLS_IE); require_symbol = 1; break; case O_tls_ie_lo16: HANDLE_OP16 (TLS_IE_LO); require_symbol = 1; break; case O_tls_ie_hi16: HANDLE_OP16 (TLS_IE_HI); require_symbol = 1; break; case O_tls_ie_ha16: HANDLE_OP16 (TLS_IE_HA); require_symbol = 1; break; case O_tls_le: HANDLE_OP16 (TLS_LE); require_symbol = 1; break; case O_tls_le_lo16: HANDLE_OP16 (TLS_LE_LO); require_symbol = 1; break; case O_tls_le_hi16: HANDLE_OP16 (TLS_LE_HI); require_symbol = 1; break; case O_tls_le_ha16: HANDLE_OP16 (TLS_LE_HA); require_symbol = 1; break; #undef HANDLE_OP16 case O_plt: switch (reloc) { case BFD_RELOC_TILEPRO_JOFFLONG_X1: reloc = BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT; break; default: die = 1; break; } use_subexp = 1; require_symbol = 1; break; case O_tls_gd_call: switch (reloc) { case BFD_RELOC_TILEPRO_JOFFLONG_X1: reloc = BFD_RELOC_TILEPRO_TLS_GD_CALL; break; default: die = 1; break; } use_subexp = 1; require_symbol = 1; break; case O_tls_gd_add: switch (reloc) { case BFD_RELOC_TILEPRO_IMM8_X0: reloc = BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD; break; case BFD_RELOC_TILEPRO_IMM8_X1: reloc = BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD; break; case BFD_RELOC_TILEPRO_IMM8_Y0: reloc = BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD; break; case BFD_RELOC_TILEPRO_IMM8_Y1: reloc = BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD; break; default: die = 1; break; } use_subexp = 1; require_symbol = 1; break; case O_tls_ie_load: switch (reloc) { case BFD_RELOC_TILEPRO_IMM8_X1: reloc = BFD_RELOC_TILEPRO_TLS_IE_LOAD; break; default: die = 1; break; } use_subexp = 1; require_symbol = 1; break; default: /* Do nothing. */ break; } if (die) { as_bad (_("Invalid operator for operand.")); } else if (use_subexp) { /* Now that we've changed the reloc, change ha16(x) into x, etc. */ if (!operand_exp->X_add_symbol->sy_flags.sy_local_symbol && operand_exp->X_add_symbol->sy_value.X_md) { /* HACK: We used X_md to mark this symbol as a fake wrapper around a real expression. To unwrap it, we just grab its value here. */ operand_exp = &operand_exp->X_add_symbol->sy_value; if (require_symbol) { /* Look at the expression, and reject it if it's not a plain symbol. */ if (operand_exp->X_op != O_symbol || operand_exp->X_add_number != 0) as_bad (_("Operator may only be applied to symbols.")); } } else { /* The value of this expression is an actual symbol, so turn that into an expression. */ memset (&subexp, 0, sizeof subexp); subexp.X_op = O_symbol; subexp.X_add_symbol = operand_exp->X_add_symbol; operand_exp = &subexp; } } /* Create a fixup to handle this later. */ fixP = fix_new_exp (frag_now, bundle_start - frag_now->fr_literal, (operand->num_bits + 7) >> 3, operand_exp, is_pc_relative, reloc); fixP->tc_fix_data = operand; /* Don't do overflow checking if we are applying a function like ha16. */ fixP->fx_no_overflow |= use_subexp; } } return bits; } /* Detects and complains if two instructions in current_bundle write to the same register, either implicitly or explicitly, or if a read-only register is written. */ static void check_illegal_reg_writes (void) { BFD_HOST_U_64_BIT all_regs_written = 0; int j; for (j = 0; j < current_bundle_index; j++) { const struct tilepro_instruction *instr = ¤t_bundle[j]; int k; BFD_HOST_U_64_BIT regs = ((BFD_HOST_U_64_BIT)1) << instr->opcode->implicitly_written_register; BFD_HOST_U_64_BIT conflict; for (k = 0; k < instr->opcode->num_operands; k++) { const struct tilepro_operand *operand = &tilepro_operands[instr->opcode->operands[instr->pipe][k]]; if (operand->is_dest_reg) { int regno = instr->operand_values[k].X_add_number; BFD_HOST_U_64_BIT mask = ((BFD_HOST_U_64_BIT)1) << regno; if ((mask & ( (((BFD_HOST_U_64_BIT)1) << TREG_IDN1) | (((BFD_HOST_U_64_BIT)1) << TREG_UDN1) | (((BFD_HOST_U_64_BIT)1) << TREG_UDN2) | (((BFD_HOST_U_64_BIT)1) << TREG_UDN3))) != 0 && !allow_suspicious_bundles) { as_bad (_("Writes to register '%s' are not allowed."), tilepro_register_names[regno]); } regs |= mask; } } /* Writing to the zero register doesn't count. */ regs &= ~(((BFD_HOST_U_64_BIT)1) << TREG_ZERO); conflict = all_regs_written & regs; if (conflict != 0 && !allow_suspicious_bundles) { /* Find which register caused the conflict. */ const char *conflicting_reg_name = "???"; int i; for (i = 0; i < TILEPRO_NUM_REGISTERS; i++) { if (((conflict >> i) & 1) != 0) { conflicting_reg_name = tilepro_register_names[i]; break; } } as_bad (_("Two instructions in the same bundle both write " "to register %s, which is not allowed."), conflicting_reg_name); } all_regs_written |= regs; } } static void tilepro_flush_bundle (void) { unsigned i; int j, addr_mod; unsigned compatible_pipes; const struct bundle_template *match; char *f; inside_bundle = 0; switch (current_bundle_index) { case 0: /* No instructions. */ return; case 1: if (current_bundle[0].opcode->can_bundle) { /* Simplify later logic by adding an explicit fnop. */ prepend_nop_to_bundle (TILEPRO_OPC_FNOP); } else { /* This instruction cannot be bundled with anything else. Prepend an explicit 'nop', rather than an 'fnop', because fnops can be replaced by later binary-processing tools while nops cannot. */ prepend_nop_to_bundle (TILEPRO_OPC_NOP); } break; default: if (!allow_suspicious_bundles) { /* Make sure all instructions can be bundled with other instructions. */ const struct tilepro_opcode *cannot_bundle = NULL; bfd_boolean seen_non_nop = FALSE; for (j = 0; j < current_bundle_index; j++) { const struct tilepro_opcode *op = current_bundle[j].opcode; if (!op->can_bundle && cannot_bundle == NULL) cannot_bundle = op; else if (op->mnemonic != TILEPRO_OPC_NOP && op->mnemonic != TILEPRO_OPC_INFO && op->mnemonic != TILEPRO_OPC_INFOL) seen_non_nop = TRUE; } if (cannot_bundle != NULL && seen_non_nop) { current_bundle_index = 0; as_bad (_("'%s' may not be bundled with other instructions."), cannot_bundle->name); return; } } break; } compatible_pipes = BUNDLE_TEMPLATE_MASK(current_bundle[0].opcode->pipes, current_bundle[1].opcode->pipes, (current_bundle_index == 3 ? current_bundle[2].opcode->pipes : (1 << NO_PIPELINE))); /* Find a template that works, if any. */ match = NULL; for (i = 0; i < sizeof bundle_templates / sizeof bundle_templates[0]; i++) { const struct bundle_template *b = &bundle_templates[i]; if ((b->pipe_mask & compatible_pipes) == b->pipe_mask) { match = b; break; } } if (match == NULL) { current_bundle_index = 0; as_bad (_("Invalid combination of instructions for bundle.")); return; } /* If the section seems to have no alignment set yet, go ahead and make it large enough to hold code. */ if (bfd_get_section_alignment (stdoutput, now_seg) == 0) bfd_set_section_alignment (stdoutput, now_seg, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES); for (j = 0; j < current_bundle_index; j++) current_bundle[j].pipe = match->pipe[j]; if (current_bundle_index == 2 && !tilepro_is_x_pipeline(match->pipe[0])) { /* We are in Y mode with only two instructions, so add an FNOP. */ prepend_nop_to_bundle (TILEPRO_OPC_FNOP); /* Figure out what pipe the fnop must be in via arithmetic. * p0 + p1 + p2 must sum to the sum of TILEPRO_PIPELINE_Y[012]. */ current_bundle[0].pipe = (tilepro_pipeline)((TILEPRO_PIPELINE_Y0 + TILEPRO_PIPELINE_Y1 + TILEPRO_PIPELINE_Y2) - (current_bundle[1].pipe + current_bundle[2].pipe)); } check_illegal_reg_writes (); f = frag_more (TILEPRO_BUNDLE_SIZE_IN_BYTES); /* Check to see if this bundle is at an offset that is a multiple of 8-bytes from the start of the frag. */ addr_mod = frag_now_fix () & (TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES - 1); if (frag_now->has_code && frag_now->insn_addr != addr_mod) as_bad (_("instruction address is not a multiple of 8")); frag_now->insn_addr = addr_mod; frag_now->has_code = 1; tilepro_bundle_bits bits = 0; for (j = 0; j < current_bundle_index; j++) { struct tilepro_instruction *instr = ¤t_bundle[j]; tilepro_pipeline pipeline = instr->pipe; const struct tilepro_opcode *opcode = instr->opcode; bits |= emit_tilepro_instruction (opcode->fixed_bit_values[pipeline], opcode->num_operands, &opcode->operands[pipeline][0], instr->operand_values, f); } number_to_chars_littleendian (f, (unsigned int)bits, 4); number_to_chars_littleendian (f + 4, (unsigned int)(bits >> 32), 4); current_bundle_index = 0; /* Emit DWARF2 debugging information. */ dwarf2_emit_insn (TILEPRO_BUNDLE_SIZE_IN_BYTES); } /* Extend the expression parser to handle hi16(label), etc. as well as SPR names when in the context of parsing an SPR. */ int tilepro_parse_name (char *name, expressionS *e, char *nextcharP) { operatorT op = O_illegal; if (parsing_spr) { void *val = hash_find (spr_hash, name); if (val == NULL) return 0; memset (e, 0, sizeof *e); e->X_op = O_constant; e->X_add_number = ((const struct tilepro_spr *)val)->number; return 1; } if (*nextcharP != '(') { /* hi16, etc. not followed by a paren is just a label with that name. */ return 0; } else { /* Look up the operator in our table. */ void *val = hash_find (special_operator_hash, name); if (val == 0) return 0; op = (operatorT)(long)val; } /* Restore old '(' and skip it. */ *input_line_pointer = '('; ++input_line_pointer; expression (e); if (*input_line_pointer != ')') { as_bad (_("Missing ')'")); *nextcharP = *input_line_pointer; return 0; } /* Skip ')'. */ ++input_line_pointer; if (e->X_op == O_register || e->X_op == O_absent) { as_bad (_("Invalid expression.")); e->X_op = O_constant; e->X_add_number = 0; } else { /* Wrap subexpression with a unary operator. */ symbolS *sym = make_expr_symbol (e); if (sym != e->X_add_symbol) { /* HACK: mark this symbol as a temporary wrapper around a proper expression, so we can unwrap it later once we have communicated the relocation type. */ sym->sy_value.X_md = 1; } memset (e, 0, sizeof *e); e->X_op = op; e->X_add_symbol = sym; e->X_add_number = 0; } *nextcharP = *input_line_pointer; return 1; } /* Parses an expression which must be a register name. */ static void parse_reg_expression (expressionS* expression) { /* Zero everything to make sure we don't miss any flags. */ memset (expression, 0, sizeof *expression); char* regname = input_line_pointer; char terminating_char = get_symbol_end (); void* pval = hash_find (main_reg_hash, regname); if (pval == NULL) as_bad (_("Expected register, got '%s'."), regname); int regno_and_flags = (int)(size_t)pval; int regno = EXTRACT_REGNO(regno_and_flags); if ((regno_and_flags & NONCANONICAL_REG_NAME_FLAG) && require_canonical_reg_names) as_warn (_("Found use of non-canonical register name %s; " "use %s instead."), regname, tilepro_register_names[regno]); /* Restore the old character following the register name. */ *input_line_pointer = terminating_char; /* Fill in the expression fields to indicate it's a register. */ expression->X_op = O_register; expression->X_add_number = regno; } /* Parses and type-checks comma-separated operands in input_line_pointer. */ static void parse_operands (const char *opcode_name, const unsigned char *operands, int num_operands, expressionS *operand_values) { int i; memset (operand_values, 0, num_operands * sizeof operand_values[0]); SKIP_WHITESPACE (); for (i = 0; i < num_operands; i++) { tilepro_operand_type type = tilepro_operands[operands[i]].type; SKIP_WHITESPACE (); if (type == TILEPRO_OP_TYPE_REGISTER) { parse_reg_expression (&operand_values[i]); } else if (*input_line_pointer == '}') { operand_values[i].X_op = O_absent; } else if (type == TILEPRO_OP_TYPE_SPR) { /* Modify the expression parser to add SPRs to the namespace. */ parsing_spr = 1; expression (&operand_values[i]); parsing_spr = 0; } else { expression (&operand_values[i]); } SKIP_WHITESPACE (); if (i + 1 < num_operands) { int separator = (unsigned char)*input_line_pointer++; if (is_end_of_line[separator] || (separator == '}')) { as_bad (_("Too few operands to '%s'."), opcode_name); return; } else if (separator != ',') { as_bad (_("Unexpected character '%c' after operand %d to %s."), (char)separator, i + 1, opcode_name); return; } } /* Arbitrarily use the first valid pipe to get the operand type, since they are all the same. */ switch (tilepro_operands[operands[i]].type) { case TILEPRO_OP_TYPE_REGISTER: /* Handled in parse_reg_expression already. */ break; case TILEPRO_OP_TYPE_SPR: /* Fall through */ case TILEPRO_OP_TYPE_IMMEDIATE: /* Fall through */ case TILEPRO_OP_TYPE_ADDRESS: if ( operand_values[i].X_op == O_register || operand_values[i].X_op == O_illegal || operand_values[i].X_op == O_absent) as_bad (_("Expected immediate expression")); break; default: abort (); } } if (!is_end_of_line[(unsigned char)*input_line_pointer]) { switch (*input_line_pointer) { case '}': if (!inside_bundle) as_bad (_("Found '}' when not bundling.")); ++input_line_pointer; inside_bundle = 0; demand_empty_rest_of_line (); break; case ',': as_bad (_("Too many operands")); break; default: /* Use default error for unrecognized garbage. */ demand_empty_rest_of_line (); break; } } } /* This is the guts of the machine-dependent assembler. STR points to a machine dependent instruction. This function is supposed to emit the frags/bytes it assembles to. */ void md_assemble (char *str) { char old_char; size_t opname_len; char *old_input_line_pointer; const struct tilepro_opcode *op; int first_pipe; /* Split off the opcode and look it up. */ opname_len = strcspn (str, " {}"); old_char = str[opname_len]; str[opname_len] = '\0'; op = hash_find(op_hash, str); str[opname_len] = old_char; if (op == NULL) { as_bad (_("Unknown opcode `%.*s'."), (int)opname_len, str); return; } /* Prepare to parse the operands. */ old_input_line_pointer = input_line_pointer; input_line_pointer = str + opname_len; SKIP_WHITESPACE (); if (current_bundle_index == TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE) { as_bad (_("Too many instructions for bundle.")); tilepro_flush_bundle (); } /* Make sure we have room for the upcoming bundle before we create any fixups. Otherwise if we have to switch to a new frag the fixup dot_value fields will be wrong. */ frag_grow (TILEPRO_BUNDLE_SIZE_IN_BYTES); /* Find a valid pipe for this opcode. */ for (first_pipe = 0; (op->pipes & (1 << first_pipe)) == 0; first_pipe++) ; /* Call the function that assembles this instruction. */ current_bundle[current_bundle_index].opcode = op; parse_operands (op->name, &op->operands[first_pipe][0], op->num_operands, current_bundle[current_bundle_index].operand_values); ++current_bundle_index; /* Restore the saved value of input_line_pointer. */ input_line_pointer = old_input_line_pointer; /* If we weren't inside curly braces, go ahead and emit this lone instruction as a bundle right now. */ if (!inside_bundle) tilepro_flush_bundle (); } static void s_require_canonical_reg_names (int require) { demand_empty_rest_of_line (); require_canonical_reg_names = require; } static void s_allow_suspicious_bundles (int allow) { demand_empty_rest_of_line (); allow_suspicious_bundles = allow; } const pseudo_typeS md_pseudo_table[] = { {"align", s_align_bytes, 0}, /* Defaulting is invalid (0). */ {"word", cons, 4}, {"require_canonical_reg_names", s_require_canonical_reg_names, 1 }, {"no_require_canonical_reg_names", s_require_canonical_reg_names, 0 }, {"allow_suspicious_bundles", s_allow_suspicious_bundles, 1 }, {"no_allow_suspicious_bundles", s_allow_suspicious_bundles, 0 }, { NULL, 0, 0 } }; /* Equal to MAX_PRECISION in atof-ieee.c */ #define MAX_LITTLENUMS 6 /* Turn the string pointed to by litP into a floating point constant of type TYPE, and emit the appropriate bytes. The number of LITTLENUMS emitted is stored in *SIZEP. An error message is returned, or NULL on OK. */ char * md_atof (int type, char *litP, int *sizeP) { int prec; LITTLENUM_TYPE words[MAX_LITTLENUMS]; LITTLENUM_TYPE *wordP; char *t; switch (type) { case 'f': case 'F': prec = 2; break; case 'd': case 'D': prec = 4; break; default: *sizeP = 0; return _("Bad call to md_atof ()"); } t = atof_ieee (input_line_pointer, type, words); if (t) input_line_pointer = t; *sizeP = prec * sizeof (LITTLENUM_TYPE); /* This loops outputs the LITTLENUMs in REVERSE order; in accord with the bigendian 386. */ for (wordP = words + prec - 1; prec--;) { md_number_to_chars (litP, (valueT) (*wordP--), sizeof (LITTLENUM_TYPE)); litP += sizeof (LITTLENUM_TYPE); } return 0; } /* We have no need to default values of symbols. */ symbolS * md_undefined_symbol (char *name ATTRIBUTE_UNUSED) { return NULL; } void tilepro_cons_fix_new (fragS *frag, int where, int nbytes, expressionS *exp) { expressionS subexp; bfd_reloc_code_real_type reloc = BFD_RELOC_NONE; int no_overflow = 0; fixS *fixP; /* See if it's one of our special functions. */ switch (exp->X_op) { case O_lo16: reloc = BFD_RELOC_LO16; no_overflow = 1; break; case O_hi16: reloc = BFD_RELOC_HI16; no_overflow = 1; break; case O_ha16: reloc = BFD_RELOC_HI16_S; no_overflow = 1; break; default: /* Do nothing. */ break; } if (reloc != BFD_RELOC_NONE) { if (nbytes != 2) { as_bad (_("This operator only produces two byte values.")); nbytes = 2; } memset (&subexp, 0, sizeof subexp); subexp.X_op = O_symbol; subexp.X_add_symbol = exp->X_add_symbol; exp = &subexp; } else { switch (nbytes) { case 1: reloc = BFD_RELOC_8; break; case 2: reloc = BFD_RELOC_16; break; case 4: reloc = BFD_RELOC_32; break; case 8: reloc = BFD_RELOC_64; break; default: as_bad (_("unsupported BFD relocation size %d"), nbytes); reloc = BFD_RELOC_32; break; } } fixP = fix_new_exp (frag, where, nbytes, exp, 0, reloc); fixP->tc_fix_data = NULL; fixP->fx_no_overflow |= no_overflow; } void md_apply_fix (fixS *fixP, valueT * valP, segT seg ATTRIBUTE_UNUSED) { const struct tilepro_operand *operand; valueT value = *valP; char *p; /* Leave these for the linker. */ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) return; if (fixP->fx_subsy != (symbolS *) NULL) { /* We can't actually support subtracting a symbol. */ as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex")); } /* Correct relocation types for pc-relativeness. */ switch (fixP->fx_r_type) { #define FIX_PCREL(rtype) \ case rtype: \ if (fixP->fx_pcrel) \ fixP->fx_r_type = rtype##_PCREL; \ break; \ \ case rtype##_PCREL: \ if (!fixP->fx_pcrel) \ fixP->fx_r_type = rtype; \ break FIX_PCREL (BFD_RELOC_8); FIX_PCREL (BFD_RELOC_16); FIX_PCREL (BFD_RELOC_32); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X0); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X1); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X0_LO); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X1_LO); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X0_HI); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X1_HI); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X0_HA); FIX_PCREL (BFD_RELOC_TILEPRO_IMM16_X1_HA); #undef FIX_PCREL default: /* Do nothing */ break; } if (fixP->fx_addsy != NULL) { #ifdef OBJ_ELF switch (fixP->fx_r_type) { case BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD: case BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD: case BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD: case BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI: case BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA: case BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA: case BFD_RELOC_TILEPRO_TLS_GD_CALL: case BFD_RELOC_TILEPRO_TLS_IE_LOAD: case BFD_RELOC_TILEPRO_TLS_DTPMOD32: case BFD_RELOC_TILEPRO_TLS_DTPOFF32: case BFD_RELOC_TILEPRO_TLS_TPOFF32: S_SET_THREAD_LOCAL (fixP->fx_addsy); break; default: /* Do nothing */ break; } #endif return; } /* Apply lo16, hi16, ha16, etc. munging. */ switch (fixP->fx_r_type) { case BFD_RELOC_LO16: case BFD_RELOC_TILEPRO_IMM16_X0_LO: case BFD_RELOC_TILEPRO_IMM16_X1_LO: case BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL: case BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL: *valP = value = apply_special_operator (O_lo16, value); break; case BFD_RELOC_HI16: case BFD_RELOC_TILEPRO_IMM16_X0_HI: case BFD_RELOC_TILEPRO_IMM16_X1_HI: case BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL: case BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL: *valP = value = apply_special_operator (O_hi16, value); break; case BFD_RELOC_HI16_S: case BFD_RELOC_TILEPRO_IMM16_X0_HA: case BFD_RELOC_TILEPRO_IMM16_X1_HA: case BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL: case BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL: *valP = value = apply_special_operator (O_ha16, value); break; default: /* Do nothing */ break; } p = fixP->fx_frag->fr_literal + fixP->fx_where; operand = fixP->tc_fix_data; if (operand != NULL) { /* It's an instruction operand. */ tilepro_bundle_bits bits = insert_operand (0, operand, value, fixP->fx_file, fixP->fx_line); /* Note that we might either be writing out bits for a bundle or a static network instruction, which are different sizes, so it's important to stop touching memory once we run out of bits. ORing in values is OK since we know the existing bits for this operand are zero. */ for (; bits != 0; bits >>= 8) *p++ |= (char)bits; } else { /* Some other kind of relocation. */ switch (fixP->fx_r_type) { case BFD_RELOC_8: case BFD_RELOC_8_PCREL: md_number_to_chars (p, value, 1); break; case BFD_RELOC_16: case BFD_RELOC_16_PCREL: md_number_to_chars (p, value, 2); break; case BFD_RELOC_32: case BFD_RELOC_32_PCREL: md_number_to_chars (p, value, 4); break; default: /* Leave it for the linker. */ return; } } fixP->fx_done = 1; } /* Generate the BFD reloc to be stuck in the object file from the fixup used internally in the assembler. */ arelent * tc_gen_reloc (asection *sec ATTRIBUTE_UNUSED, fixS *fixp) { arelent *reloc; reloc = (arelent *) xmalloc (sizeof (arelent)); reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; /* Make sure none of our internal relocations make it this far. They'd better have been fully resolved by this point. */ gas_assert ((int) fixp->fx_r_type > 0); reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type); if (reloc->howto == NULL) { as_bad_where (fixp->fx_file, fixp->fx_line, _("cannot represent `%s' relocation in object file"), bfd_get_reloc_code_name (fixp->fx_r_type)); return NULL; } if (!fixp->fx_pcrel != !reloc->howto->pc_relative) { as_fatal (_("internal error? cannot generate `%s' relocation (%d, %d)"), bfd_get_reloc_code_name (fixp->fx_r_type), fixp->fx_pcrel, reloc->howto->pc_relative); } gas_assert (!fixp->fx_pcrel == !reloc->howto->pc_relative); reloc->addend = fixp->fx_offset; return reloc; } /* The location from which a PC relative jump should be calculated, given a PC relative reloc. */ long md_pcrel_from (fixS *fixP) { return fixP->fx_frag->fr_address + fixP->fx_where; } /* Return 1 if it's OK to adjust a reloc by replacing the symbol with a section symbol plus some offset. */ int tilepro_fix_adjustable (fixS *fix) { /* Prevent all adjustments to global symbols */ if (S_IS_EXTERNAL (fix->fx_addsy) || S_IS_WEAK (fix->fx_addsy)) return 0; return 1; } int tilepro_unrecognized_line (int ch) { switch (ch) { case '{': if (inside_bundle) { as_bad (_("Found '{' when already bundling.")); } else { inside_bundle = 1; current_bundle_index = 0; } return 1; case '}': if (!inside_bundle) { as_bad (_("Found '}' when not bundling.")); } else { tilepro_flush_bundle (); } /* Allow '{' to follow on the same line. We also allow ";;", but that happens automatically because ';' is an end of line marker. */ SKIP_WHITESPACE (); if (input_line_pointer[0] == '{') { input_line_pointer++; return tilepro_unrecognized_line ('{'); } demand_empty_rest_of_line (); return 1; default: break; } /* Not a valid line. */ return 0; } /* This is called from HANDLE_ALIGN in write.c. Fill in the contents of an rs_align_code fragment. */ void tilepro_handle_align (fragS *fragp) { int bytes, fix; char *p; if (fragp->fr_type != rs_align_code) return; bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix; p = fragp->fr_literal + fragp->fr_fix; fix = 0; /* Determine the bits for NOP. */ const struct tilepro_opcode *nop_opcode = &tilepro_opcodes[TILEPRO_OPC_NOP]; tilepro_bundle_bits nop = ( nop_opcode->fixed_bit_values[TILEPRO_PIPELINE_X0] | nop_opcode->fixed_bit_values[TILEPRO_PIPELINE_X1]); if ((bytes & (TILEPRO_BUNDLE_SIZE_IN_BYTES - 1)) != 0) { fix = bytes & (TILEPRO_BUNDLE_SIZE_IN_BYTES - 1); memset (p, 0, fix); p += fix; bytes -= fix; } number_to_chars_littleendian (p, (unsigned int)nop, 4); number_to_chars_littleendian (p + 4, (unsigned int)(nop >> 32), 4); fragp->fr_fix += fix; fragp->fr_var = TILEPRO_BUNDLE_SIZE_IN_BYTES; } /* Standard calling conventions leave the CFA at SP on entry. */ void tilepro_cfi_frame_initial_instructions (void) { cfi_add_CFA_def_cfa_register (54); } int tc_tilepro_regname_to_dw2regnum (char *regname) { int i; for (i = 0; i < TILEPRO_NUM_REGISTERS; i++) { if (!strcmp (regname, tilepro_register_names[i])) return i; } return -1; }