URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [include/] [opcode/] [pyr.h] - Rev 46
Go to most recent revision | Compare with Previous | Blame | View Log
/* pyramid.opcode.h -- gdb initial attempt. Copyright 2001, 2010 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ /* pyramid opcode table: wot to do with this particular opcode */ struct pyr_datum { char nargs; char * args; /* how to compile said opcode */ unsigned long mask; /* Bit vector: which operand modes are valid for this opcode */ unsigned char code; /* op-code (always 6(?) bits */ }; typedef struct pyr_insn_format { unsigned int mode :4; unsigned int operator :8; unsigned int index_scale :2; unsigned int index_reg :6; unsigned int operand_1 :6; unsigned int operand_2:6; } pyr_insn_format; /* We store four bytes of opcode for all opcodes. Pyramid is sufficiently RISCy that: - insns are always an integral number of words; - the length of any insn can be told from the first word of the insn. (ie, if there are zero, one, or two words of immediate operand/offset). The args component is a string containing two characters for each operand of the instruction. The first specifies the kind of operand; the second, the place it is stored. */ /* Kinds of operands: mask assembler syntax description 0x0001: movw Rn,Rn register to register 0x0002: movw K,Rn quick immediate to register 0x0004: movw I,Rn long immediate to register 0x0008: movw (Rn),Rn register indirect to register movw (Rn)[x],Rn register indirect to register 0x0010: movw I(Rn),Rn offset register indirect to register movw I(Rn)[x],Rn offset register indirect, indexed, to register 0x0020: movw Rn,(Rn) register to register indirect 0x0040: movw K,(Rn) quick immediate to register indirect 0x0080: movw I,(Rn) long immediate to register indirect 0x0100: movw (Rn),(Rn) register indirect to-register indirect 0x0100: movw (Rn),(Rn) register indirect to-register indirect 0x0200: movw I(Rn),(Rn) register indirect+offset to register indirect 0x0200: movw I(Rn),(Rn) register indirect+offset to register indirect 0x0400: movw Rn,I(Rn) register to register indirect+offset 0x0800: movw K,I(Rn) quick immediate to register indirect+offset 0x1000: movw I,I(Rn) long immediate to register indirect+offset 0x1000: movw (Rn),I(Rn) register indirect to-register indirect+offset 0x1000: movw I(Rn),I(Rn) register indirect+offset to register indirect +offset 0x0000: (irregular) ??? Each insn has a four-bit field encoding the type(s) of its operands. */ /* Some common combinations */ /* the first 5,(0x1|0x2|0x4|0x8|0x10) ie (1|2|4|8|16), ie ( 32 -1)*/ #define GEN_TO_REG (31) #define UNKNOWN ((unsigned long)-1) #define ANY (GEN_TO_REG | (GEN_TO_REG << 5) | (GEN_TO_REG << 15)) #define CONVERT (1|8|0x10|0x20|0x200) #define K_TO_REG (2) #define I_TO_REG (4) #define NOTK_TO_REG (GEN_TO_REG & ~K_TO_REG) #define NOTI_TO_REG (GEN_TO_REG & ~I_TO_REG) /* The assembler requires that this array be sorted as follows: all instances of the same mnemonic must be consecutive. All instances of the same mnemonic with the same number of operands must be consecutive. */ struct pyr_opcode /* pyr opcode text */ { char * name; /* opcode name: lowercase string [key] */ struct pyr_datum datum; /* rest of opcode table [datum] */ }; #define pyr_how args #define pyr_nargs nargs #define pyr_mask mask #define pyr_name name struct pyr_opcode pyr_opcodes[] = { {"movb", { 2, "", UNKNOWN, 0x11}, }, {"movh", { 2, "", UNKNOWN, 0x12} }, {"movw", { 2, "", ANY, 0x10} }, {"movl", { 2, "", ANY, 0x13} }, {"mnegw", { 2, "", (0x1|0x8|0x10), 0x14} }, {"mnegf", { 2, "", 0x1, 0x15} }, {"mnegd", { 2, "", 0x1, 0x16} }, {"mcomw", { 2, "", (0x1|0x8|0x10), 0x17} }, {"mabsw", { 2, "", (0x1|0x8|0x10), 0x18} }, {"mabsf", { 2, "", 0x1, 0x19} }, {"mabsd", { 2, "", 0x1, 0x1a} }, {"mtstw", { 2, "", (0x1|0x8|0x10), 0x1c} }, {"mtstf", { 2, "", 0x1, 0x1d} }, {"mtstd", { 2, "", 0x1, 0x1e} }, {"mova", { 2, "", 0x8|0x10, 0x1f} }, {"movzbw", { 2, "", (0x1|0x8|0x10), 0x20} }, {"movzhw", { 2, "", (0x1|0x8|0x10), 0x21} }, /* 2 insns out of order here */ {"movbl", { 2, "", 1, 0x4f} }, {"filbl", { 2, "", 1, 0x4e} }, {"cvtbw", { 2, "", CONVERT, 0x22} }, {"cvthw", { 2, "", CONVERT, 0x23} }, {"cvtwb", { 2, "", CONVERT, 0x24} }, {"cvtwh", { 2, "", CONVERT, 0x25} }, {"cvtwf", { 2, "", CONVERT, 0x26} }, {"cvtwd", { 2, "", CONVERT, 0x27} }, {"cvtfw", { 2, "", CONVERT, 0x28} }, {"cvtfd", { 2, "", CONVERT, 0x29} }, {"cvtdw", { 2, "", CONVERT, 0x2a} }, {"cvtdf", { 2, "", CONVERT, 0x2b} }, {"addw", { 2, "", GEN_TO_REG, 0x40} }, {"addwc", { 2, "", GEN_TO_REG, 0x41} }, {"subw", { 2, "", GEN_TO_REG, 0x42} }, {"subwb", { 2, "", GEN_TO_REG, 0x43} }, {"rsubw", { 2, "", GEN_TO_REG, 0x44} }, {"mulw", { 2, "", GEN_TO_REG, 0x45} }, {"emul", { 2, "", GEN_TO_REG, 0x47} }, {"umulw", { 2, "", GEN_TO_REG, 0x46} }, {"divw", { 2, "", GEN_TO_REG, 0x48} }, {"ediv", { 2, "", GEN_TO_REG, 0x4a} }, {"rdivw", { 2, "", GEN_TO_REG, 0x4b} }, {"udivw", { 2, "", GEN_TO_REG, 0x49} }, {"modw", { 2, "", GEN_TO_REG, 0x4c} }, {"umodw", { 2, "", GEN_TO_REG, 0x4d} }, {"addf", { 2, "", 1, 0x50} }, {"addd", { 2, "", 1, 0x51} }, {"subf", { 2, "", 1, 0x52} }, {"subd", { 2, "", 1, 0x53} }, {"mulf", { 2, "", 1, 0x56} }, {"muld", { 2, "", 1, 0x57} }, {"divf", { 2, "", 1, 0x58} }, {"divd", { 2, "", 1, 0x59} }, {"cmpb", { 2, "", UNKNOWN, 0x61} }, {"cmph", { 2, "", UNKNOWN, 0x62} }, {"cmpw", { 2, "", UNKNOWN, 0x60} }, {"ucmpb", { 2, "", UNKNOWN, 0x66} }, /* WHY no "ucmph"??? */ {"ucmpw", { 2, "", UNKNOWN, 0x65} }, {"xchw", { 2, "", UNKNOWN, 0x0f} }, {"andw", { 2, "", GEN_TO_REG, 0x30} }, {"orw", { 2, "", GEN_TO_REG, 0x31} }, {"xorw", { 2, "", GEN_TO_REG, 0x32} }, {"bicw", { 2, "", GEN_TO_REG, 0x33} }, {"lshlw", { 2, "", GEN_TO_REG, 0x38} }, {"ashlw", { 2, "", GEN_TO_REG, 0x3a} }, {"ashll", { 2, "", GEN_TO_REG, 0x3c} }, {"ashrw", { 2, "", GEN_TO_REG, 0x3b} }, {"ashrl", { 2, "", GEN_TO_REG, 0x3d} }, {"rotlw", { 2, "", GEN_TO_REG, 0x3e} }, {"rotrw", { 2, "", GEN_TO_REG, 0x3f} }, /* push and pop insns are "going away next release". */ {"pushw", { 2, "", GEN_TO_REG, 0x0c} }, {"popw", { 2, "", (0x1|0x8|0x10), 0x0d} }, {"pusha", { 2, "", (0x8|0x10), 0x0e} }, {"bitsw", { 2, "", UNKNOWN, 0x35} }, {"bitcw", { 2, "", UNKNOWN, 0x36} }, /* some kind of ibra/dbra insns??*/ {"icmpw", { 2, "", UNKNOWN, 0x67} }, {"dcmpw", { 2, "", (1|4|0x20|0x80|0x400|0x1000), 0x69} },/*FIXME*/ {"acmpw", { 2, "", 1, 0x6b} }, /* Call is written as a 1-op insn, but is always (dis)assembled as a 2-op insn with a 2nd op of tr14. The assembler will have to grok this. */ {"call", { 2, "", GEN_TO_REG, 0x04} }, {"call", { 1, "", GEN_TO_REG, 0x04} }, {"callk", { 1, "", UNKNOWN, 0x06} },/* system call?*/ /* Ret is usually written as a 0-op insn, but gets disassembled as a 1-op insn. The operand is always tr15. */ {"ret", { 0, "", UNKNOWN, 0x09} }, {"ret", { 1, "", UNKNOWN, 0x09} }, {"adsf", { 2, "", (1|2|4), 0x08} }, {"retd", { 2, "", UNKNOWN, 0x0a} }, {"btc", { 2, "", UNKNOWN, 0x01} }, {"bfc", { 2, "", UNKNOWN, 0x02} }, /* Careful: halt is 0x00000000. Jump must have some other (mode?)bit set?? */ {"jump", { 1, "", UNKNOWN, 0x00} }, {"btp", { 2, "", UNKNOWN, 0xf00} }, /* read control-stack pointer is another 1-or-2 operand insn. */ {"rcsp", { 2, "", UNKNOWN, 0x01f} }, {"rcsp", { 1, "", UNKNOWN, 0x01f} } }; /* end: pyramid.opcode.h */ /* One day I will have to take the time to find out what operands are valid for these insns, and guess at what they mean. I can't imagine what the "I???" insns (iglob, etc) do. the arithmetic-sounding insns ending in "p" sound awfully like BCD arithmetic insns: dshlp -> Decimal SHift Left Packed dshrp -> Decimal SHift Right Packed and cvtlp would be convert long to packed. I have no idea how the operands are interpreted; but having them be a long register with (address, length) of an in-memory packed BCD operand would not be surprising. They are unlikely to be a packed bcd string: 64 bits of long give is only 15 digits+sign, which isn't enough for COBOL. */ #if 0 {"wcsp", { 2, "", UNKNOWN, 0x00} }, /*write csp?*/ /* The OSx Operating System Porting Guide claims SSL does things with tr12 (a register reserved to it) to do with static block-structure references. SSL=Set Static Link? It's "Going away next release". */ {"ssl", { 2, "", UNKNOWN, 0x00} }, {"ccmps", { 2, "", UNKNOWN, 0x00} }, {"lcd", { 2, "", UNKNOWN, 0x00} }, {"uemul", { 2, "", UNKNOWN, 0x00} }, /*unsigned emul*/ {"srf", { 2, "", UNKNOWN, 0x00} }, /*Gidget time???*/ {"mnegp", { 2, "", UNKNOWN, 0x00} }, /move-neg phys?*/ {"ldp", { 2, "", UNKNOWN, 0x00} }, /*load phys?*/ {"ldti", { 2, "", UNKNOWN, 0x00} }, {"ldb", { 2, "", UNKNOWN, 0x00} }, {"stp", { 2, "", UNKNOWN, 0x00} }, {"stti", { 2, "", UNKNOWN, 0x00} }, {"stb", { 2, "", UNKNOWN, 0x00} }, {"stu", { 2, "", UNKNOWN, 0x00} }, {"addp", { 2, "", UNKNOWN, 0x00} }, {"subp", { 2, "", UNKNOWN, 0x00} }, {"mulp", { 2, "", UNKNOWN, 0x00} }, {"divp", { 2, "", UNKNOWN, 0x00} }, {"dshlp", { 2, "", UNKNOWN, 0x00} }, /* dec shl packed? */ {"dshrp", { 2, "", UNKNOWN, 0x00} }, /* dec shr packed? */ {"movs", { 2, "", UNKNOWN, 0x00} }, /*move (string?)?*/ {"cmpp", { 2, "", UNKNOWN, 0x00} }, /* cmp phys?*/ {"cmps", { 2, "", UNKNOWN, 0x00} }, /* cmp (string?)?*/ {"cvtlp", { 2, "", UNKNOWN, 0x00} }, /* cvt long to p??*/ {"cvtpl", { 2, "", UNKNOWN, 0x00} }, /* cvt p to l??*/ {"dintr", { 2, "", UNKNOWN, 0x00} }, /* ?? intr ?*/ {"rphysw", { 2, "", UNKNOWN, 0x00} }, /* read phys word?*/ {"wphysw", { 2, "", UNKNOWN, 0x00} }, /* write phys word?*/ {"cmovs", { 2, "", UNKNOWN, 0x00} }, {"rsubw", { 2, "", UNKNOWN, 0x00} }, {"bicpsw", { 2, "", UNKNOWN, 0x00} }, /* clr bit in psw? */ {"bispsw", { 2, "", UNKNOWN, 0x00} }, /* set bit in psw? */ {"eio", { 2, "", UNKNOWN, 0x00} }, /* ?? ?io ? */ {"callp", { 2, "", UNKNOWN, 0x00} }, /* call phys?*/ {"callr", { 2, "", UNKNOWN, 0x00} }, {"lpcxt", { 2, "", UNKNOWN, 0x00} }, /*load proc context*/ {"rei", { 2, "", UNKNOWN, 0x00} }, /*ret from intrpt*/ {"rport", { 2, "", UNKNOWN, 0x00} }, /*read-port?*/ {"rtod", { 2, "", UNKNOWN, 0x00} }, /*read-time-of-day?*/ {"ssi", { 2, "", UNKNOWN, 0x00} }, {"vtpa", { 2, "", UNKNOWN, 0x00} }, /*virt-to-phys-addr?*/ {"wicl", { 2, "", UNKNOWN, 0x00} }, /* write icl ? */ {"wport", { 2, "", UNKNOWN, 0x00} }, /*write-port?*/ {"wtod", { 2, "", UNKNOWN, 0x00} }, /*write-time-of-day?*/ {"flic", { 2, "", UNKNOWN, 0x00} }, {"iglob", { 2, "", UNKNOWN, 0x00} }, /* I global? */ {"iphys", { 2, "", UNKNOWN, 0x00} }, /* I physical? */ {"ipid", { 2, "", UNKNOWN, 0x00} }, /* I pid? */ {"ivect", { 2, "", UNKNOWN, 0x00} }, /* I vector? */ {"lamst", { 2, "", UNKNOWN, 0x00} }, {"tio", { 2, "", UNKNOWN, 0x00} }, #endif
Go to most recent revision | Compare with Previous | Blame | View Log