Subversion Repositories open8_urisc

#
# Unusual variables checked by this code:
#       NOP - four byte opcode for no-op (defaults to 0)
#       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#       OTHER_READONLY_SECTIONS - other than .text .init .ctors .rodata ...
#               (e.g., .PARISC.milli)
#       OTHER_READWRITE_SECTIONS - other than .data .bss .sdata ...
#               (e.g., .PARISC.global)
#       OTHER_SECTIONS - at the end
#       EXECUTABLE_SYMBOLS - symbols that must be defined for an
#               executable (e.g., _DYNAMIC_LINK)
#       TEXT_START_SYMBOLS - symbols that appear at the start of the
#               .text section.
#       DATA_START_SYMBOLS - symbols that appear at the start of the
#               .data section.
#       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#               .bss section besides __bss_start.
#       DATA_PLT - .plt should be in data segment, not text segment.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test "$LD_FLAG" = "N" && DATA_ADDR=.
INTERP=".interp   ${RELOCATING-0} : { *(.interp)        }"
PLT=".plt    ${RELOCATING-0} : { *(.plt)        }"
cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
              "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${ARCH})

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}
SECTIONS
{
  /* Read-only sections, merged into text segment: */
  ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_START_ADDR} + SIZEOF_HEADERS;}}
  ${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
  ${CREATE_SHLIB-${INTERP}}
  .hash        ${RELOCATING-0} : { *(.hash)             }
  .dynsym      ${RELOCATING-0} : { *(.dynsym)           }
  .dynstr      ${RELOCATING-0} : { *(.dynstr)           }
  .rel.text    ${RELOCATING-0} : { *(.rel.text)         }
  .rela.text   ${RELOCATING-0} : { *(.rela.text)        }
  .rel.data    ${RELOCATING-0} : { *(.rel.data)         }
  .rela.data   ${RELOCATING-0} : { *(.rela.data)        }
  .rel.rodata  ${RELOCATING-0} : { *(.rel.rodata)       }
  .rela.rodata ${RELOCATING-0} : { *(.rela.rodata)      }
  .rel.got     ${RELOCATING-0} : { *(.rel.got)          }
  .rela.got    ${RELOCATING-0} : { *(.rela.got)         }
  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)        }
  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)       }
  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)        }
  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)       }
  .rel.bss     ${RELOCATING-0} : { *(.rel.bss)          }
  .rela.bss    ${RELOCATING-0} : { *(.rela.bss)         }
  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)          }
  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)         }
  .init        ${RELOCATING-0} : { *(.init)     } =${NOP-0}
  ${DATA_PLT-${PLT}}
  .text    ${RELOCATING-0} :
  {
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    *(.text)
    ${CONSTRUCTING+     __CTOR_LIST__ = .;}
    ${CONSTRUCTING+     LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)}
    ${CONSTRUCTING+     *(.ctors)}
    ${CONSTRUCTING+     LONG(0)}
    ${CONSTRUCTING+     __CTOR_END__ = .;}
    ${CONSTRUCTING+     __DTOR_LIST__ = .;}
    ${CONSTRUCTING+     LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)}
    ${CONSTRUCTING+     *(.dtors)}
    ${CONSTRUCTING+     LONG(0)}
    ${CONSTRUCTING+     __DTOR_END__ = .;}
  }
  ${RELOCATING+_etext = .;}
  ${RELOCATING+PROVIDE (etext = .);}
  .fini    ${RELOCATING-0} : { *(.fini)    } =${NOP-0}
  .ctors   ${RELOCATING-0} : { *(.ctors)   }
  .dtors   ${RELOCATING-0} : { *(.dtors)   }
  .rodata  ${RELOCATING-0} : { *(.rodata)  }
  .rodata1 ${RELOCATING-0} : { *(.rodata1) }
  ${OTHER_READONLY_SECTIONS}

  /* Read-write section, merged into data segment: */
  ${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};}
  .data  ${RELOCATING-0} :
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data)
    ${CONSTRUCTING+CONSTRUCTORS}
  }
  .data1 ${RELOCATING-0} : { *(.data1) }
  ${OTHER_READWRITE_SECTIONS}
  .got         ${RELOCATING-0} : { *(.got.plt) *(.got) }
  .dynamic     ${RELOCATING-0} : { *(.dynamic) }
  ${DATA_PLT+${PLT}}
  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata   ${RELOCATING-0} : { *(.sdata) }
  ${RELOCATING+_edata  =  .;}
  ${RELOCATING+PROVIDE (edata = .);}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  .sbss    ${RELOCATING-0} : { *(.sbss) *(.scommon) }
  .bss     ${RELOCATING-0} :
  {
   *(.dynbss)
   *(.bss)
   *(COMMON)
  }
  ${RELOCATING+_end = . ;}
  ${RELOCATING+PROVIDE (end = .);}

  /* These are needed for ELF backends which have not yet been
     converted to the new style linker.  */
  .stab 0 : { *(.stab) }
  .stabstr 0 : { *(.stabstr) }

  ${OTHER_SECTIONS}
}
EOF