Subversion Repositories open8_urisc

# Support routines for LD testsuite.
#   Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
#    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
#    Free Software Foundation, Inc.
#
# This file is part of the GNU Binutils.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
# MA 02110-1301, USA.

proc load_common_lib { name } {
    global srcdir
    load_file $srcdir/../../binutils/testsuite/lib/$name
}

load_common_lib binutils-common.exp

# Returns 1 if the gcc for the target is at least version MAJOR.MINOR
# Returns 0 otherwise.
#
proc at_least_gcc_version { major minor } {
    
    if {![info exists CC]} {
        set CC [find_gcc]
    }
    if { $CC == "" } {
      return 0
    }
    set state [remote_exec host $CC --version]
    set tmp "[lindex $state 1]\n"
    # Look for (eg) 4.6.1 in the version output.
    regexp " .* (\[1-9\])\\.(\[0-9\])\\.\[0-9\]* .*" "$tmp" fred maj min
    verbose "gcc version: $tmp"
    verbose "major gcc version is $maj, want at least $major"
    if { $maj == $major } then {
        verbose "minor gcc version is $min, want at least $minor"
        return [expr  $min >= $minor ]
    } else {
        return [expr $maj > $major ]
    }
}

# Extract and print the version number of ld.
#
proc default_ld_version { ld } {
    global host_triplet

    if { ![is_remote host] && [which $ld] == 0 } then {
        perror "$ld does not exist"
        exit 1
    }

    remote_exec host "$ld --version" "" "/dev/null" "ld.version"
    remote_upload host "ld.version"
    set tmp [prune_warnings [file_contents "ld.version"]]
    remote_file build delete "ld.version"
    remote_file host delete "ld.version"

    regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" $tmp version cyg number
    if [info exists number] then {
        clone_output "$ld $number\n"
    }
}

proc run_host_cmd { prog command } {
    global link_output

    if { ![is_remote host] && [which "$prog"] == 0 } then {
        perror "$prog does not exist"
        return 0
    }

    verbose -log "$prog $command"
    set status [remote_exec host [concat sh -c [list "$prog $command 2>&1"]] "" "/dev/null" "ld.tmp"]
    remote_upload host "ld.tmp"
    set link_output [file_contents "ld.tmp"]
    regsub "\n$" $link_output "" link_output
    if { [lindex $status 0] != 0 && [string match "" $link_output] } then {
        append link_output "child process exited abnormally"
    }
    remote_file build delete ld.tmp
    remote_file host delete ld.tmp

    if [string match "" $link_output] then {
        return ""
    }

    verbose -log "$link_output"
    return "$link_output"
}

proc run_host_cmd_yesno { prog command } {
    global exec_output

    set exec_output [prune_warnings [run_host_cmd "$prog" "$command"]]
    if [string match "" $exec_output] then {
        return 1;
    }
    return 0;
}

# Link an object using relocation.
#
proc default_ld_relocate { ld target objects } {
    global HOSTING_EMU

    remote_file host delete $target
    return [run_host_cmd_yesno "$ld" "$HOSTING_EMU -o $target -r $objects"]
}

# Check to see if ld is being invoked with a non-endian output format
#
proc is_endian_output_format { object_flags } {

    if {[string match "*-oformat binary*" $object_flags] ||      \
        [string match "*-oformat ieee*" $object_flags] ||        \
        [string match "*-oformat ihex*" $object_flags] ||        \
        [string match "*-oformat netbsd-core*" $object_flags] || \
        [string match "*-oformat srec*" $object_flags] ||        \
        [string match "*-oformat tekhex*" $object_flags] ||      \
        [string match "*-oformat trad-core*" $object_flags] } then {
        return 0
    } else {
        return 1
    }
}

# Look for big-endian or little-endian switches in the multlib
# options and translate these into a -EB or -EL switch.  Note
# we cannot rely upon proc process_multilib_options to do this
# for us because for some targets the compiler does not support
# -EB/-EL but it does support -mbig-endian/-mlittle-endian, and
# the site.exp file will include the switch "-mbig-endian"
# (rather than "big-endian") which is not detected by proc
# process_multilib_options.
#
proc big_or_little_endian {} {

    if [board_info [target_info name] exists multilib_flags] {
        set tmp_flags " [board_info [target_info name] multilib_flags]"

        foreach x $tmp_flags {
            case $x in {
                {*big*endian eb EB -eb -EB -mb -meb} {
                    set flags " -EB"
                    return $flags
                }
                {*little*endian el EL -el -EL -ml -mel} {
                    set flags " -EL"
                    return $flags
                }
            }
        }
    }

    set flags ""
    return $flags
}

# Link a program using ld.
#
proc default_ld_link { ld target objects } {
    global HOSTING_EMU
    global HOSTING_CRT0
    global HOSTING_LIBS
    global LIBS
    global host_triplet
    global link_output
    global exec_output

    set objs "$HOSTING_CRT0 $objects"
    set libs "$LIBS $HOSTING_LIBS"

    if [is_endian_output_format $objects] then {
        set flags [big_or_little_endian]
    } else {
        set flags ""
    }

    remote_file host delete $target

    return [run_host_cmd_yesno "$ld" "$HOSTING_EMU $flags -o $target $objs $libs"]
}

# Link a program using ld, without including any libraries.
#
proc default_ld_simple_link { ld target objects } {
    global host_triplet
    global gcc_ld_flag
    global exec_output

    if [is_endian_output_format $objects] then {
        set flags [big_or_little_endian]
    } else {
        set flags ""
    }

    # If we are compiling with gcc, we want to add gcc_ld_flag to
    # flags.  Rather than determine this in some complex way, we guess
    # based on the name of the compiler.
    set ldexe $ld
    set ldparm [string first " " $ld]
    set ldflags ""
    if { $ldparm > 0 } then {
        set ldflags [string range $ld $ldparm end]
        set ldexe [string range $ld 0 $ldparm]
        set ld $ldexe
    }
    set ldexe [string replace $ldexe 0 [string last "/" $ldexe] ""]
    if {[string match "*gcc*" $ldexe] || [string match "*++*" $ldexe]} then {
        set ldflags "$gcc_ld_flag $ldflags"
    }

    remote_file host delete $target

    set exec_output [run_host_cmd "$ld" "$ldflags $flags -o $target $objects"]
    set exec_output [prune_warnings $exec_output]

    # We don't care if we get a warning about a non-existent start
    # symbol, since the default linker script might use ENTRY.
    regsub -all "(^|\n)(\[^\n\]*: warning: cannot find entry symbol\[^\n\]*\n?)" $exec_output "\\1" exec_output

    if [string match "" $exec_output] then {
        return 1
    } else {
        return 0
    }
}

# Compile an object using cc.
#
proc default_ld_compile { cc source object } {
    global CFLAGS
    global CXXFLAGS
    global srcdir
    global subdir
    global host_triplet
    global gcc_gas_flag

    set cc_prog $cc
    if {[llength $cc_prog] > 1} then {
        set cc_prog [lindex $cc_prog 0]
    }
    if {![is_remote host] && [which $cc_prog] == 0} then {
        perror "$cc_prog does not exist"
        return 0
    }

    remote_file build delete "$object"
    remote_file host delete "$object"

    set flags "-I$srcdir/$subdir"

    # If we are compiling with gcc, we want to add gcc_gas_flag to
    # flags.  Rather than determine this in some complex way, we guess
    # based on the name of the compiler.
    set ccexe $cc
    set ccparm [string first " " $cc]
    set ccflags ""
    if { $ccparm > 0 } then {
        set ccflags [string range $cc $ccparm end]
        set ccexe [string range $cc 0 $ccparm]
        set cc $ccexe
    }
    set ccexe [string replace $ccexe 0 [string last "/" $ccexe] ""]
    if {[string match "*gcc*" $ccexe] || [string match "*++*" $ccexe]} then {
        set flags "$gcc_gas_flag $flags"
    }

    if {[string match "*++*" $ccexe]} {
        set flags "$flags $CXXFLAGS"
    } else {
        set flags "$flags $CFLAGS"
    }

    if [board_info [target_info name] exists multilib_flags] {
        append flags " [board_info [target_info name] multilib_flags]"
    }

    verbose -log "$cc $flags $ccflags -c $source -o $object"

    set status [remote_exec host [concat sh -c [list "$cc $flags $ccflags -c $source -o $object 2>&1"]] "" "/dev/null" "ld.tmp"]
    remote_upload host "ld.tmp"
    set exec_output [file_contents "ld.tmp"]
    remote_file build delete "ld.tmp"
    remote_file host delete "ld.tmp"
    set exec_output [prune_warnings $exec_output]
    if [string match "" $exec_output] then {
        if {![file exists $object]} then {
            regexp ".*/(\[^/\]*)$" $source all dobj
            regsub "\\.c" $dobj ".o" realobj
            verbose "looking for $realobj"
            if {[remote_file host exists $realobj]} then {
                verbose -log "mv $realobj $object"
                remote_upload "$realobj" "$object"
            } else {
                perror "$object not found after compilation"
                return 0
            }
        }
        return 1
    } else {
        verbose -log "$exec_output"
        perror "$source: compilation failed"
        return 0
    }
}

# Assemble a file.
#
proc default_ld_assemble { as in_flags source object } {
    global ASFLAGS
    global host_triplet

    if ![info exists ASFLAGS] { set ASFLAGS "" }

    set flags [big_or_little_endian]
    set exec_output [run_host_cmd "$as" "$flags $in_flags $ASFLAGS -o $object $source"]
    set exec_output [prune_warnings $exec_output]
    if [string match "" $exec_output] then {
        return 1
    } else {
        perror "$source: assembly failed"
        return 0
    }
}

# Run nm on a file, putting the result in the array nm_output.
#
proc default_ld_nm { nm nmflags object } {
    global NMFLAGS
    global nm_output
    global host_triplet

    if {[info exists nm_output]} {
      unset nm_output
    }

    if ![info exists NMFLAGS] { set NMFLAGS "" }

    # Ensure consistent sorting of symbols
    if {[info exists env(LC_ALL)]} {
        set old_lc_all $env(LC_ALL)
    }
    set env(LC_ALL) "C"

    verbose -log "$nm $NMFLAGS $nmflags $object >tmpdir/nm.out"

    set status [remote_exec host [concat sh -c [list "$nm $NMFLAGS $nmflags $object 2>ld.stderr"]] "" "/dev/null" "tmpdir/nm.out"]
    if {[info exists old_lc_all]} {
        set env(LC_ALL) $old_lc_all
    } else {
        unset env(LC_ALL)
    }
    remote_upload host "ld.stderr"
    remote_upload host "tmpdir/nm.out" "tmpdir/nm.out"
    set exec_output [prune_warnings [file_contents "ld.stderr"]]
    remote_file host delete "ld.stderr"
    remote_file build delete "ld.stderr"
    if [string match "" $exec_output] then {
        set file [open tmpdir/nm.out r]
        while { [gets $file line] != -1 } {
            verbose "$line" 2
            if [regexp "^(\[0-9a-fA-F\]+) \[a-zA-Z0-9\] \\.*(.+)$" $line whole value name] {
                set name [string trimleft $name "_"]
                verbose "Setting nm_output($name) to 0x$value" 2
                set nm_output($name) 0x$value
            }
        }
        close $file
        return 1
    } else {
        verbose -log "$exec_output"
        perror "$object: nm failed"
        return 0
    }
}

# Define various symbols needed when not linking against all
# target libs.
proc ld_simple_link_defsyms {} {

    set flags "--defsym __stack_chk_fail=0"

    # ARM targets call __gccmain
    if {[istarget arm*-*-*]} {
        append flags " --defsym __gccmain=0"
    }

    # Windows targets need __main, prefixed with underscore.
    if {[istarget *-*-cygwin* ] || [istarget *-*-mingw*]} {
        append flags " --defsym ___main=0"
    }

    # PowerPC EABI code calls __eabi.
    if {[istarget powerpc*-*-eabi*] || [istarget powerpc*-*-rtems*]} {
        append flags " --defsym __eabi=0"
    }

    # mn10200 code calls __truncsipsi2_d0_d2.
    if {[istarget mn10200*-*-*]} then {
        append flags " --defsym __truncsipsi2_d0_d2=0"
    }

    # m6811/m6812 code has references to soft registers.
    if {[istarget m6811-*-*] || [istarget m6812-*-*] || [istarget m68hc1*-*-*]} {
        append flags " --defsym _.frame=0 --defsym _.d1=0 --defsym _.d2=0"
        append flags " --defsym _.d3=0 --defsym _.d4=0"
        append flags " --defsym _.tmp=0 --defsym _.xy=0 --defsym _.z=0"
    }

    # Some OpenBSD targets have ProPolice and reference __guard and
    # __stack_smash_handler.
    if [istarget *-*-openbsd*] {
        append flags " --defsym __guard=0"
        append flags " --defsym __stack_smash_handler=0"
    }

    return $flags
}

# run_dump_test FILE
# Copied from gas testsuite, tweaked and further extended.
#
# Assemble a .s file, then run some utility on it and check the output.
#
# There should be an assembly language file named FILE.s in the test
# suite directory, and a pattern file called FILE.d.  `run_dump_test'
# will assemble FILE.s, run some tool like `objdump', `objcopy', or
# `nm' on the .o file to produce textual output, and then analyze that
# with regexps.  The FILE.d file specifies what program to run, and
# what to expect in its output.
#
# The FILE.d file begins with zero or more option lines, which specify
# flags to pass to the assembler, the program to run to dump the
# assembler's output, and the options it wants.  The option lines have
# the syntax:
#
#         # OPTION: VALUE
#
# OPTION is the name of some option, like "name" or "objdump", and
# VALUE is OPTION's value.  The valid options are described below.
# Whitespace is ignored everywhere, except within VALUE.  The option
# list ends with the first line that doesn't match the above syntax
# (hmm, not great for error detection).
#
# The interesting options are:
#
#   name: TEST-NAME
#       The name of this test, passed to DejaGNU's `pass' and `fail'
#       commands.  If omitted, this defaults to FILE, the root of the
#       .s and .d files' names.
#
#   as: FLAGS
#       When assembling, pass FLAGS to the assembler.
#       If assembling several files, you can pass different assembler
#       options in the "source" directives.  See below.
#
#   ld: FLAGS
#       Link assembled files using FLAGS, in the order of the "source"
#       directives, when using multiple files.
#
#   ld_after_inputfiles: FLAGS
#       Similar to "ld", but put after all input files.
#
#   objcopy_linked_file: FLAGS
#       Run objcopy on the linked file with the specified flags.
#       This lets you transform the linked file using objcopy, before the
#       result is analyzed by an analyzer program specified below (which
#       may in turn *also* be objcopy).
#
#   PROG: PROGRAM-NAME
#       The name of the program to run to analyze the .o file produced
#       by the assembler or the linker output.  This can be omitted;
#       run_dump_test will guess which program to run by seeing which of
#       the flags options below is present.
#
#   objdump: FLAGS
#   nm: FLAGS
#   objcopy: FLAGS
#       Use the specified program to analyze the assembler or linker
#       output file, and pass it FLAGS, in addition to the output name.
#       Note that they are run with LC_ALL=C in the environment to give
#       consistent sorting of symbols.
#
#   source: SOURCE [FLAGS]
#       Assemble the file SOURCE.s using the flags in the "as" directive
#       and the (optional) FLAGS.  If omitted, the source defaults to
#       FILE.s.
#       This is useful if several .d files want to share a .s file.
#       More than one "source" directive can be given, which is useful
#       when testing linking.
#
#   xfail: TARGET
#       The test is expected to fail on TARGET.  This may occur more than
#       once.
#
#   target: TARGET
#       Only run the test for TARGET.  This may occur more than once; the
#       target being tested must match at least one.  You may provide target
#       name "cfi" for any target supporting the CFI statements.
#
#   notarget: TARGET
#       Do not run the test for TARGET.  This may occur more than once;
#       the target being tested must not match any of them.
#
#   error: REGEX
#       An error with message matching REGEX must be emitted for the test
#       to pass.  The PROG, objdump, nm and objcopy options have no
#       meaning and need not supplied if this is present.  Multiple "error"
#       directives append to the expected linker error message.
#
#   warning: REGEX
#       Expect a linker warning matching REGEX.  It is an error to issue
#       both "error" and "warning".  Multiple "warning" directives
#       append to the expected linker warning message.
#
# Each option may occur at most once unless otherwise mentioned.
#
# After the option lines come regexp lines.  `run_dump_test' calls
# `regexp_diff' to compare the output of the dumping tool against the
# regexps in FILE.d.  `regexp_diff' is defined in binutils-common.exp;
# see further comments there.
#
proc run_dump_test { name } {
    global subdir srcdir
    global OBJDUMP NM AS OBJCOPY READELF LD
    global OBJDUMPFLAGS NMFLAGS ASFLAGS OBJCOPYFLAGS READELFFLAGS LDFLAGS
    global host_triplet runtests
    global env verbose

    if [string match "*/*" $name] {
        set file $name
        set name [file tail $name]
    } else {
        set file "$srcdir/$subdir/$name"
    }

    if ![runtest_file_p $runtests $name] then {
        return
    }

    set opt_array [slurp_options "${file}.d"]
    if { $opt_array == -1 } {
        perror "error reading options from $file.d"
        unresolved $subdir/$name
        return
    }
    set dumpfile tmpdir/dump.out
    set run_ld 0
    set run_objcopy 0
    set opts(as) {}
    set opts(ld) {}
    set opts(ld_after_inputfiles) {}
    set opts(xfail) {}
    set opts(target) {}
    set opts(notarget) {}
    set opts(objdump) {}
    set opts(nm) {}
    set opts(objcopy) {}
    set opts(readelf) {}
    set opts(name) {}
    set opts(PROG) {}
    set opts(source) {}
    set opts(error) {}
    set opts(warning) {}
    set opts(objcopy_linked_file) {}

    foreach i $opt_array {
        set opt_name [lindex $i 0]
        set opt_val [lindex $i 1]
        if ![info exists opts($opt_name)] {
            perror "unknown option $opt_name in file $file.d"
            unresolved $subdir/$name
            return
        }

        switch -- $opt_name {
            xfail {}
            target {}
            notarget {}
            warning {}
            error {}
            source {
                # Move any source-specific as-flags to a separate list to
                # simplify processing.
                if { [llength $opt_val] > 1 } {
                    lappend asflags [lrange $opt_val 1 end]
                    set opt_val [lindex $opt_val 0]
                } else {
                    lappend asflags {}
                }
            }
            default {
                if [string length $opts($opt_name)] {
                    perror "option $opt_name multiply set in $file.d"
                    unresolved $subdir/$name
                    return
                }

                # A single "# ld:" with no options should do the right thing.
                if { $opt_name == "ld" } {
                    set run_ld 1
                }
                # Likewise objcopy_linked_file.
                if { $opt_name == "objcopy_linked_file" } {
                    set run_objcopy 1
                }
            }
        }
        if { $opt_name == "as" || $opt_name == "ld" } {
            set opt_val [subst $opt_val]
        }
        set opts($opt_name) [concat $opts($opt_name) $opt_val]
    }
    foreach opt { as ld } {
        regsub {\[big_or_little_endian\]} $opts($opt) \
            [big_or_little_endian] opts($opt)
    }

    # Decide early whether we should run the test for this target.
    if { [llength $opts(target)] > 0 } {
        set targmatch 0
        foreach targ $opts(target) {
            if [istarget $targ] {
                set targmatch 1
                break
            }
        }
        if { $targmatch == 0 } {
            return
        }
    }
    foreach targ $opts(notarget) {
        if [istarget $targ] {
            return
        }
    }

    set program ""
    # It's meaningless to require an output-testing method when we
    # expect an error.
    if { $opts(error) == "" } {
        if {$opts(PROG) != ""} {
            switch -- $opts(PROG) {
                objdump { set program objdump }
                nm      { set program nm }
                objcopy { set program objcopy }
                readelf { set program readelf }
                default
                { perror "unrecognized program option $opts(PROG) in $file.d"
                  unresolved $subdir/$name
                  return }
            }
        } else {
        # Guess which program to run, by seeing which option was specified.
            foreach p {objdump objcopy nm readelf} {
                if {$opts($p) != ""} {
                    if {$program != ""} {
                        perror "ambiguous dump program in $file.d"
                        unresolved $subdir/$name
                        return
                    } else {
                        set program $p
                    }
                }
            }
        }
        if { $program == "" && $opts(warning) == "" } {
            perror "dump program unspecified in $file.d"
            unresolved $subdir/$name
            return
        }
    }

    if { $opts(name) == "" } {
        set testname "$subdir/$name"
    } else {
        set testname $opts(name)
    }

    if { $opts(source) == "" } {
        set sourcefiles [list ${file}.s]
        set asflags [list ""]
    } else {
        set sourcefiles {}
        foreach sf $opts(source) {
            if { [string match "/*" $sf] } {
                lappend sourcefiles "$sf"
            } else {
                lappend sourcefiles "$srcdir/$subdir/$sf"
            }
        }
    }

    # Time to setup xfailures.
    foreach targ $opts(xfail) {
        setup_xfail $targ
    }

    # Assemble each file.
    set objfiles {}
    for { set i 0 } { $i < [llength $sourcefiles] } { incr i } {
        set sourcefile [lindex $sourcefiles $i]
        set sourceasflags [lindex $asflags $i]

        set objfile "tmpdir/dump$i.o"
        catch "exec rm -f $objfile" exec_output
        lappend objfiles $objfile
        set cmd "$AS $ASFLAGS $opts(as) $sourceasflags -o $objfile $sourcefile"

        send_log "$cmd\n"
        set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] "" "/dev/null" "ld.tmp"]
        remote_upload host "ld.tmp"
        set comp_output [prune_warnings [file_contents "ld.tmp"]]
        remote_file host delete "ld.tmp"
        remote_file build delete "ld.tmp"

        if { [lindex $cmdret 0] != 0 || ![string match "" $comp_output] } then {
            send_log "$comp_output\n"
            verbose "$comp_output" 3

            set exitstat "succeeded"
            if { $cmdret != 0 } { set exitstat "failed" }
            verbose -log "$exitstat with: <$comp_output>"
            fail $testname
            return
        }
    }

    set expmsg $opts(error)
    if { $opts(warning) != "" } {
        if { $expmsg != "" } {
            perror "$testname: mixing error and warning test-directives"
            return
        }
        set expmsg $opts(warning)
    }

    # Perhaps link the file(s).
    if { $run_ld } {
        set objfile "tmpdir/dump"
        catch "exec rm -f $objfile" exec_output

        # Add -L$srcdir/$subdir so that the linker command can use
        # linker scripts in the source directory.
        set cmd "$LD $LDFLAGS -L$srcdir/$subdir \
                   $opts(ld) -o $objfile $objfiles $opts(ld_after_inputfiles)"

        send_log "$cmd\n"
        set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] "" "/dev/null" "ld.tmp"]
        remote_upload host "ld.tmp"
        set comp_output [file_contents "ld.tmp"]
        remote_file host delete "ld.tmp"
        remote_file build delete "ld.tmp"
        set cmdret [lindex $cmdret 0]

        if { $cmdret == 0 && $run_objcopy } {
            set infile $objfile
            set objfile "tmpdir/dump1"
            remote_file host delete $objfile

            # Note that we don't use OBJCOPYFLAGS here; any flags must be
            # explicitly specified.
            set cmd "$OBJCOPY $opts(objcopy_linked_file) $infile $objfile"

            send_log "$cmd\n"
            set cmdret [remote_exec host [concat sh -c [list "$cmd 2>&1"]] "" "/dev/null" "ld.tmp"]
            remote_upload host "ld.tmp"
            append comp_output [file_contents "ld.tmp"]
            remote_file host delete "ld.tmp"
            remote_file build delete "ld.tmp"
            set cmdret [lindex $cmdret 0]
        }

        regsub "\n$" $comp_output "" comp_output
        if { $cmdret != 0 || $comp_output != "" || $expmsg != "" } then {
            set exitstat "succeeded"
            if { $cmdret != 0 } { set exitstat "failed" }
            verbose -log "$exitstat with: <$comp_output>, expected: <$expmsg>"
            send_log "$comp_output\n"
            verbose "$comp_output" 3

            if { ($expmsg == "") == ($comp_output == "") \
                    && [regexp $expmsg $comp_output] \
                    && (($cmdret == 0) == ($opts(error) == "")) } {
                # We have the expected output from ld.
                if { $opts(error) != "" || $program == "" } {
                    pass $testname
                    return
                }
            } else {
                verbose -log "$exitstat with: <$comp_output>, expected: <$expmsg>"
                fail $testname
                return
            }
        }
    } else {
        set objfile "tmpdir/dump0.o"
    }

    # We must not have expected failure if we get here.
    if { $opts(error) != "" } {
        fail $testname
        return
    }

    set progopts1 $opts($program)
    eval set progopts \$[string toupper $program]FLAGS
    eval set binary \$[string toupper $program]

    if { ![is_remote host] && [which $binary] == 0 } {
        untested $testname
        return
    }

    if { $progopts1 == "" } { set $progopts1 "-r" }
    verbose "running $binary $progopts $progopts1" 3

    # Objcopy, unlike the other two, won't send its output to stdout,
    # so we have to run it specially.
    set cmd "$binary $progopts $progopts1 $objfile > $dumpfile"
    if { $program == "objcopy" } {
        set cmd "$binary $progopts $progopts1 $objfile $dumpfile"
    }

    # Ensure consistent sorting of symbols
    if {[info exists env(LC_ALL)]} {
        set old_lc_all $env(LC_ALL)
    }
    set env(LC_ALL) "C"
    send_log "$cmd\n"
    set cmdret [remote_exec host [concat sh -c [list "$cmd 2>ld.tmp"]] "" "/dev/null"]
    set cmdret [lindex $cmdret 0]
    remote_upload host "ld.tmp"
    set comp_output [prune_warnings [file_contents "ld.tmp"]]
    remote_file host delete "ld.tmp"
    remote_file build delete "ld.tmp"
    if {[info exists old_lc_all]} {
        set env(LC_ALL) $old_lc_all
    } else {
        unset env(LC_ALL)
    }
    if { $cmdret != 0 || $comp_output != "" } {
        send_log "exited abnormally with $cmdret, output:$comp_output\n"
        fail $testname
        return
    }

    if { $verbose > 2 } then { verbose "output is [file_contents $dumpfile]" 3 }
    if { [regexp_diff $dumpfile "${file}.d"] } then {
        fail $testname
        if { $verbose == 2 } then { verbose "output is [file_contents $dumpfile]" 2 }
        return
    }

    pass $testname
}

proc slurp_options { file } {
    if [catch { set f [open $file r] } x] {
        #perror "couldn't open `$file': $x"
        perror "$x"
        return -1
    }
    set opt_array {}
    # whitespace expression
    set ws  {[  ]*}
    set nws {[^         ]*}
    # whitespace is ignored anywhere except within the options list;
    # option names are alphabetic plus underscore only.
    set pat "^#${ws}(\[a-zA-Z_\]*)$ws:${ws}(.*)$ws\$"
    while { [gets $f line] != -1 } {
        set line [string trim $line]
        # Whitespace here is space-tab.
        if [regexp $pat $line xxx opt_name opt_val] {
            # match!
            lappend opt_array [list $opt_name $opt_val]
        } else {
            break
        }
    }
    close $f
    return $opt_array
}

proc file_contents { filename } {
    set file [open $filename r]
    set contents [read $file]
    close $file
    return $contents
}

proc set_file_contents { filename contents } {
    set file [open $filename w]
    puts $file "$contents"
    close $file
}

# Create an archive using ar
#
proc ar_simple_create { ar aropts target objects } {
    remote_file host delete $target

    set exec_output [run_host_cmd "$ar" "$aropts rc $target $objects"]
    set exec_output [prune_warnings $exec_output]

    if [string match "" $exec_output] then {
        send_log "$exec_output\n"
        return 1
    } else {
        return 0
    }
}

# List contains test-items with 3 items followed by 2 lists, one item and
# one optional item:
#  0:name
#  1:ld/ar options
#  2:assembler options
#  3:filenames of assembler files
#  4:list of actions, options and expected outputs.
#  5:name of output file
#  6:compiler flags (optional)
#
# Actions: { command command-line-options file-containg-expected-output-regexps }
# Commands:
#   objdump: Apply objdump options on result.
#   nm: Apply nm options on result.
#   readelf: Apply readelf options on result.
#   ld: Don't apply anything on result.  Compare output during linking with 
#     the file containing regexps (which is the second arg, not the third).
#     Note that this *must* be the first action if it is to be used at all;
#     in all other cases, any output from the linker during linking is
#     treated as a sign of an error and FAILs the test.
#
proc run_ld_link_tests { ldtests } {
    global ld
    global as
    global nm
    global ar
    global objdump
    global READELF
    global srcdir
    global subdir
    global env
    global CC
    global CFLAGS
    global runtests
    global exec_output

    foreach testitem $ldtests {
        set testname [lindex $testitem 0]

        if ![runtest_file_p $runtests $testname] then {
            continue
        }

        set ld_options [lindex $testitem 1]
        set as_options [lindex $testitem 2]
        set src_files  [lindex $testitem 3]
        set actions [lindex $testitem 4]
        set binfile tmpdir/[lindex $testitem 5]
        set cflags [lindex $testitem 6]
        set objfiles {}
        set is_unresolved 0
        set failed 0
        set maybe_failed 0
        set ld_output ""

#       verbose -log "Testname is $testname"
#       verbose -log "ld_options is $ld_options"
#       verbose -log "as_options is $as_options"
#       verbose -log "src_files is $src_files"
#       verbose -log "actions is $actions"
#       verbose -log "binfile is $binfile"

        # Assemble each file in the test.
        foreach src_file $src_files {
            set fileroot "[file rootname [file tail $src_file]]"
            set objfile "tmpdir/$fileroot.o"
            lappend objfiles $objfile

            if { [file extension $src_file] == ".c" } {
                set as_file "tmpdir/$fileroot.s"
                if ![ld_compile "$CC -S $CFLAGS $cflags" $srcdir/$subdir/$src_file $as_file] {
                    set is_unresolved 1
                    break
                }
            } else {
                set as_file "$srcdir/$subdir/$src_file"
            }
            if ![ld_assemble $as "$as_options $as_file" $objfile] {
                set is_unresolved 1
                break
            }
        }

        # Catch assembler errors.
        if { $is_unresolved } {
            unresolved $testname
            continue
        }

        if { [regexp ".*\\.a$" $binfile] } {
            if { ![ar_simple_create $ar $ld_options $binfile "$objfiles"] } {
                set failed 1
            }
        } elseif { ![ld_simple_link $ld $binfile "-L$srcdir/$subdir $ld_options $objfiles"] } {
            set maybe_failed 1
            set ld_output "$exec_output"
        }

        if { !$failed } {
            foreach actionlist $actions {
                set action [lindex $actionlist 0]
                set progopts [lindex $actionlist 1]

                # There are actions where we run regexp_diff on the
                # output, and there are other actions (presumably).
                # Handling of the former look the same.
                set dump_prog ""
                switch -- $action {
                    objdump
                        { set dump_prog $objdump }
                    nm
                        { set dump_prog $nm }
                    readelf
                        { set dump_prog $READELF }
                    ld
                        { set dump_prog "ld" }
                    default
                        {
                            perror "Unrecognized action $action"
                            set is_unresolved 1
                            break
                        }
                    }

                if { $action == "ld" } {
                    set regexpfile $progopts
                    verbose "regexpfile is $srcdir/$subdir/$regexpfile"
                    set_file_contents "tmpdir/ld.messages" "$ld_output"
                    verbose "ld.messages has '[file_contents tmpdir/ld.messages]'"
                    if { [regexp_diff "tmpdir/ld.messages" "$srcdir/$subdir/$regexpfile"] } then {
                        verbose "output is $ld_output" 2
                        set failed 1
                        break
                    }
                    set maybe_failed 0
                } elseif { !$maybe_failed && $dump_prog != "" } {
                    set dumpfile [lindex $actionlist 2]
                    set binary $dump_prog

                    # Ensure consistent sorting of symbols
                    if {[info exists env(LC_ALL)]} {
                        set old_lc_all $env(LC_ALL)
                    }
                    set env(LC_ALL) "C"
                    set cmd "$binary $progopts $binfile"
                    set status [remote_exec host [concat sh -c [list "$cmd >dump.out 2>ld.stderr"]] "" "/dev/null"]
                    send_log "$cmd\n"
                    remote_upload host "ld.stderr"
                    set comp_output [prune_warnings [file_contents "ld.stderr"]]
                    remote_file host delete "ld.stderr"
                    remote_file build delete "ld.stderr"
                    
                    if {[info exists old_lc_all]} {
                        set env(LC_ALL) $old_lc_all
                    } else {
                        unset env(LC_ALL)
                    }

                    if ![string match "" $comp_output] then {
                        send_log "$comp_output\n"
                        set failed 1
                        break
                    }

                    remote_upload host "dump.out"

                    if { [regexp_diff "dump.out" "$srcdir/$subdir/$dumpfile"] } then {
                        verbose "output is [file_contents "dump.out"]" 2
                        set failed 1
                        remote_file build delete "dump.out"
                        remote_file host delete "dump.out"
                        break
                    }
                    remote_file build delete "dump.out"
                    remote_file host delete "dump.out"
                }
            }
        }

        if { $is_unresolved } {
            unresolved $testname
        } elseif { $maybe_failed || $failed } {
            fail $testname
        } else {
            pass $testname
        }
    }
}

# This definition is taken from an unreleased version of DejaGnu.  Once
# that version gets released, and has been out in the world for a few
# months at least, it may be safe to delete this copy.
if ![string length [info proc prune_warnings]] {
    #
    # prune_warnings -- delete various system verbosities from TEXT
    #
    # An example is:
    # ld.so: warning: /usr/lib/libc.so.1.8.1 has older revision than expected 9
    #
    # Sites with particular verbose os's may wish to override this in site.exp.
    #
    proc prune_warnings { text } {
        # This is from sun4's.  Do it for all machines for now.
        # The "\\1" is to try to preserve a "\n" but only if necessary.
        regsub -all "(^|\n)(ld.so: warning:\[^\n\]*\n?)+" $text "\\1" text

        # It might be tempting to get carried away and delete blank lines, etc.
        # Just delete *exactly* what we're ask to, and that's it.
        return $text
    }
}

# targets_to_xfail is a list of target triplets to be xfailed.
# ldtests contains test-items with 3 items followed by 1 lists, 2 items
# and 3 optional items:
#   0:name
#   1:ld options
#   2:assembler options
#   3:filenames of source files
#   4:name of output file
#   5:expected output
#   6:compiler flags (optional)
#   7:language (optional)
#   8:linker warning (optional)

proc run_ld_link_exec_tests { targets_to_xfail ldtests } {
    global ld
    global as
    global srcdir
    global subdir
    global env
    global CC
    global CXX
    global CFLAGS
    global CXXFLAGS
    global errcnt
    global exec_output

    foreach testitem $ldtests {
        foreach target $targets_to_xfail {
            setup_xfail $target
        }
        set testname [lindex $testitem 0]
        set ld_options [lindex $testitem 1]
        set as_options [lindex $testitem 2]
        set src_files  [lindex $testitem 3]
        set binfile tmpdir/[lindex $testitem 4]
        set expfile [lindex $testitem 5]
        set cflags [lindex $testitem 6]
        set lang [lindex $testitem 7]
        set warning [lindex $testitem 8]
        set objfiles {}
        set failed 0

#       verbose -log "Testname is $testname"
#       verbose -log "ld_options is $ld_options"
#       verbose -log "as_options is $as_options"
#       verbose -log "src_files is $src_files"
#       verbose -log "actions is $actions"
#       verbose -log "binfile is $binfile"

        # Assemble each file in the test.
        foreach src_file $src_files {
            set fileroot "[file rootname [file tail $src_file]]"
            set objfile "tmpdir/$fileroot.o"
            lappend objfiles $objfile

            # We ignore warnings since some compilers may generate
            # incorrect section attributes and the assembler will warn
            # them.
            if { [ string match "c++" $lang ] } {
                ld_compile "$CXX -c $CXXFLAGS $cflags" $srcdir/$subdir/$src_file $objfile
            } else {
                ld_compile "$CC -c $CFLAGS $cflags" $srcdir/$subdir/$src_file $objfile
            }

            # We have to use $CC to build PIE and shared library.
            if { [ string match "c" $lang ] } {
                set link_proc ld_simple_link
                set link_cmd $CC
            } elseif { [ string match "c++" $lang ] } {
                set link_proc ld_simple_link
                set link_cmd $CXX
            } elseif { [ string match "-shared" $ld_options ] \
                 || [ string match "-pie" $ld_options ] } {
                set link_proc ld_simple_link
                set link_cmd $CC
            } else {
                set link_proc ld_link
                set link_cmd $ld
            }

            if ![$link_proc $link_cmd $binfile "-L$srcdir/$subdir $ld_options $objfiles"] {
                set failed 1
            } else {
                set failed 0
            }

            # Check if exec_output is expected.
            if { $warning != "" } then {
                verbose -log "returned with: <$exec_output>, expected: <$warning>"
                if { [regexp $warning $exec_output] } then {
                    set failed 0
                } else {
                    set failed 1
                }
            }

            if { $failed == 0 } {
                send_log "Running: $binfile > $binfile.out\n"
                verbose "Running: $binfile > $binfile.out"
                catch "exec $binfile > $binfile.out" exec_output
            
                if ![string match "" $exec_output] then {
                    send_log "$exec_output\n"
                    verbose "$exec_output" 1
                    set failed 1
                } else {
                    send_log "diff $binfile.out $srcdir/$subdir/$expfile\n"
                    verbose "diff $binfile.out $srcdir/$subdir/$expfile"
                    catch "exec diff $binfile.out $srcdir/$subdir/$expfile" exec_output
                    set exec_output [prune_warnings $exec_output]

                    if ![string match "" $exec_output] then {
                        send_log "$exec_output\n"
                        verbose "$exec_output" 1
                        set failed 1
                    }
                }
            }

            if { $failed != 0 } {
                fail $testname
            } else {
                set errcnt 0
                pass $testname
            }
        }
    }
}

# List contains test-items with 3 items followed by 2 lists, one item and
# one optional item:
#  0:name
#  1:ld or ar options
#  2:compile options
#  3:filenames of source files
#  4:action and options.
#  5:name of output file
#  6:language (optional)
#  7:linker warnings (optional)
#
# Actions:
# objdump: Apply objdump options on result.  Compare with regex (last arg).
# nm: Apply nm options on result.  Compare with regex (last arg).
# readelf: Apply readelf options on result.  Compare with regex (last arg).
#
proc run_cc_link_tests { ldtests } {
    global nm
    global objdump
    global READELF
    global srcdir
    global subdir
    global env
    global CC
    global CXX
    global CFLAGS
    global CXXFLAGS
    global ar
    global exec_output

    foreach testitem $ldtests {
        set testname [lindex $testitem 0]
        set ldflags [lindex $testitem 1]
        set cflags [lindex $testitem 2]
        set src_files  [lindex $testitem 3]
        set actions [lindex $testitem 4]
        set binfile tmpdir/[lindex $testitem 5]
        set lang [lindex $testitem 6]
        set warnings [lindex $testitem 7]
        set objfiles {}
        set is_unresolved 0
        set failed 0

        # Compile each file in the test.
        foreach src_file $src_files {
            set fileroot "[file rootname [file tail $src_file]]"
            set objfile "tmpdir/$fileroot.o"
            lappend objfiles $objfile

            # We ignore warnings since some compilers may generate
            # incorrect section attributes and the assembler will warn
            # them.
            if { [ string match "c++" $lang ] } {
                ld_compile "$CXX -c $CXXFLAGS $cflags" $srcdir/$subdir/$src_file $objfile
            } else {
                ld_compile "$CC -c $CFLAGS $cflags" $srcdir/$subdir/$src_file $objfile
            }
        }

        # Clear error and warning counts.
        reset_vars

        if { [ string match "c++" $lang ] } {
            set cc_cmd $CXX
        } else {
            set cc_cmd $CC
        }

        if { [regexp ".*\\.a$" $binfile] } {
            if { ![ar_simple_create $ar $ldflags $binfile "$objfiles"] } {
                fail $testname
                set failed 1
            } else {
                set failed 0
            }
        } elseif { ![ld_simple_link $cc_cmd $binfile "-L$srcdir/$subdir $ldflags $objfiles"] } {
            # Check if exec_output is expected.
            if { $warnings != "" } then {
                verbose -log "returned with: <$exec_output>, expected: <$warnings>"
                if { [regexp $warnings $exec_output] } then {
                    set failed 0
                } else {
                    set failed 1
                }
            } else {
                fail $testname
                set failed 1
            }
        } else {
            set failed 0
        }

        if { $failed == 0 } {
            foreach actionlist $actions {
                set action [lindex $actionlist 0]
                set progopts [lindex $actionlist 1]

                # There are actions where we run regexp_diff on the
                # output, and there are other actions (presumably).
                # Handling of the former look the same.
                set dump_prog ""
                switch -- $action {
                    objdump
                        { set dump_prog $objdump }
                    nm
                        { set dump_prog $nm }
                    readelf
                        { set dump_prog $READELF }
                    default
                        {
                            perror "Unrecognized action $action"
                            set is_unresolved 1
                            break
                        }
                    }

                if { $dump_prog != "" } {
                    set dumpfile [lindex $actionlist 2]
                    set binary $dump_prog

                    # Ensure consistent sorting of symbols
                    if {[info exists env(LC_ALL)]} {
                        set old_lc_all $env(LC_ALL)
                    }
                    set env(LC_ALL) "C"
                    set cmd "$binary $progopts $binfile > dump.out"
                    send_log "$cmd\n"
                    catch "exec $cmd" comp_output
                    if {[info exists old_lc_all]} {
                        set env(LC_ALL) $old_lc_all
                    } else {
                        unset env(LC_ALL)
                    }
                    set comp_output [prune_warnings $comp_output]

                    if ![string match "" $comp_output] then {
                        send_log "$comp_output\n"
                        set failed 1
                        break
                    }

                    if { [regexp_diff "dump.out" "$srcdir/$subdir/$dumpfile"] } then {
                        verbose "output is [file_contents "dump.out"]" 2
                        set failed 1
                        break
                    }
                }
            }

            if { $failed != 0 } {
                fail $testname
            } else { if { $is_unresolved == 0 } {
                pass $testname
            } }
        }

        # Catch action errors.
        if { $is_unresolved != 0 } {
            unresolved $testname
            continue
        }
    }
}

# Returns true if --gc-sections is supported on the target.

proc check_gc_sections_available { } {
    global gc_sections_available_saved
    global ld
    
    if {![info exists gc_sections_available_saved]} {
        # Some targets don't support gc-sections despite whatever's
        # advertised by ld's options.
        if {[istarget arc-*-*]
             || [istarget d30v-*-*]
             || [istarget dlx-*-*]
             || [istarget i960-*-*]
             || [istarget or32-*-*]
             || [istarget pj*-*-*]
             || [istarget alpha-*-*]
             || [istarget hppa*64-*-*]
             || [istarget i370-*-*]
             || [istarget i860-*-*]
             || [istarget ia64-*-*]
             || [istarget mep-*-*]
             || [istarget mn10200-*-*]
             || [istarget *-*-cygwin]
             || [istarget *-*-mingw*] } {
            set gc_sections_available_saved 0
            return 0
        }

        # elf2flt uses -q (--emit-relocs), which is incompatible with
        # --gc-sections.
        if { [board_info target exists ldflags]
             && [regexp " -elf2flt\[ =\]" " [board_info target ldflags] "] } {
            set gc_sections_available_saved 0
            return 0
        }

        # Check if the ld used by gcc supports --gc-sections.
        # FIXME: this test is useless since ld --help always says
        # --gc-sections is available
        set ld_output [remote_exec host $ld "--help"]
        if { [ string first "--gc-sections" $ld_output ] >= 0 } {
            set gc_sections_available_saved 1
        } else {
            set gc_sections_available_saved 0
        }
    }
    return $gc_sections_available_saved
}

# Returns true if -shared is supported on the target
# Only used and accurate for ELF targets at the moment

proc check_shared_lib_support { } {
    if {![istarget arc-*-*]
         && ![istarget avr-*-*]
         && ![istarget cr16-*-*]
         && ![istarget cris*-*-*]
         && ![istarget crx-*-*]
         && ![istarget d10v-*-*]
         && ![istarget d30v-*-*]
         && ![istarget dlx-*-*]
         && ![istarget epiphany-*-*]
         && ![istarget fr30-*-*]
         && ![istarget frv-*-*]
         && ![istarget h8300-*-*]
         && ![istarget i860-*-*]
         && ![istarget i960-*-*]
         && ![istarget ip2k-*-*]
         && ![istarget iq2000-*-*]
         && ![istarget lm32-*-*]
         && ![istarget m32c-*-*]
         && ![istarget m32r-*-*]
         && ![istarget m6811-*-*]
         && ![istarget m6812-*-*]
         && ![istarget m68hc1*-*-*]
         && ![istarget mcore*-*-*]
         && ![istarget mep-*-*]
         && ![istarget microblaze-*-*]
         && ![istarget mn10200-*-*]
         && ![istarget moxie-*-*]
         && ![istarget msp430-*-*]
         && ![istarget mt-*-*]
         && ![istarget openrisc-*-*]
         && ![istarget or32-*-*]
         && ![istarget pj-*-*]
         && ![istarget rx-*-*]
         && ![istarget spu-*-*]
         && ![istarget v850*-*-*]
         && ![istarget xstormy16-*-*]
         && ![istarget *-*-irix*]
         && ![istarget *-*-rtems] } {
        return 1
    }
    return 0
}

# Returns true if the target ld supports the plugin API.
proc check_plugin_api_available { } {
    global plugin_api_available_saved
    global ld
    if {![info exists plugin_api_available_saved]} {
        # Check if the ld used by gcc supports --plugin.
        set ld_output [remote_exec host $ld "--help"]
        if { [ string first "-plugin" $ld_output ] >= 0 } {
            set plugin_api_available_saved 1
        } else {
            set plugin_api_available_saved 0
        }
    }
    return $plugin_api_available_saved
}

# Check if the assembler supports CFI statements.

proc check_as_cfi { } {
    global check_as_cfi_result
    global as
    if [info exists check_as_cfi_result] {
        return $check_as_cfi_result
    }
    set as_file "tmpdir/check_as_cfi.s"
    set as_fh [open $as_file w 0666]
    puts $as_fh "# Generated file. DO NOT EDIT"
    puts $as_fh "\t.cfi_startproc"
    puts $as_fh "\t.cfi_endproc"
    close $as_fh
    remote_download host $as_file
    verbose -log "Checking CFI support:"
    rename "perror" "check_as_cfi_perror"
    proc perror { args } { }
    set success [ld_assemble $as $as_file "/dev/null"]
    rename "perror" ""
    rename "check_as_cfi_perror" "perror"
    #remote_file host delete $as_file
    set check_as_cfi_result $success
    return $success
}

# Provide virtual target "cfi" for targets supporting CFI.

rename "istarget" "istarget_ld"
proc istarget { target } {
    if {$target == "cfi"} {
        return [check_as_cfi]
    }
    return [istarget_ld $target]
}