URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [opcodes/] [ChangeLog] - Rev 35
Go to most recent revision | Compare with Previous | Blame | View Log
2011-06-03 Nick Clifton <nickc@redhat.com>
PR binutils/12752
* arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
computing address offsets.
(print_arm_address): Likewise.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
2011-06-02 Jie Zhang <jie@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Maciej Rozycki <macro@codesourcery.com>
* arm-dis.c (print_insn_coprocessor): Explicitly print #-0
as address offset.
(print_arm_address): Likewise. Elide positive #0 appropriately.
(print_insn_arm): Likewise.
2011-06-02 Nick Clifton <nickc@redhat.com>
PR gas/12752
* arm-dis.c (print_insn_thumb32): Do not sign extend addresses
passed to print_address_func.
2011-06-02 Nick Clifton <nickc@redhat.com>
* arm-dis.c: Fix spelling mistakes.
* op/opcodes.pot: Regenerate.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Replace S390_OPERAND_REG_EVEN with
S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type.
* s390-opc.txt: Fix cxr instruction type.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Add new instruction types marking register pair
operands.
* s390-opc.txt: Match instructions having register pair operands
to the new instruction types.
2011-05-19 Nick Clifton <nickc@redhat.com>
* v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
operands.
2011-05-10 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
* i386-init.h: Regenerated.
2011-04-27 Nick Clifton <nickc@redhat.com>
* po/da.po: Updated Danish translation.
2011-04-26 Anton Blanchard <anton@samba.org>
* ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
2011-04-21 DJ Delorie <dj@redhat.com>
* rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
* rx-decode.c: Regenerate.
2011-04-20 H.J. Lu <hongjiu.lu@intel.com>
* i386-init.h: Regenerated.
2011-04-19 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
from bdver1 flags.
2011-04-13 Nick Clifton <nickc@redhat.com>
* v850-dis.c (disassemble): Always print a closing square brace if
an opening square brace was printed.
2011-04-12 Nick Clifton <nickc@redhat.com>
PR binutils/12534
* arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
patterns.
(print_insn_thumb32): Handle %L.
2011-04-11 Julian Brown <julian@codesourcery.com>
* arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
(print_insn_thumb32): Add APSR bitmask support.
2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
* arm-dis.c (print_insn): init vars moved into private_data structure.
2011-03-24 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
Use branch types instead.
(print_insn): Likewise.
2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (mips_builtin_opcodes): Correct register use
annotation of "alnv.ps".
2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
2011-02-22 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.
2011-02-22 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.
2011-02-19 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (saved_state): Mark static. Change a[01]x to ax[] and
a[01]w to aw[]. Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
exception, end_of_registers, msize, memory, bfd_mach.
(CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
LB0REG, LC1REG, LT1REG, LB1REG): Delete
(AXREG, AWREG, LCREG, LTREG, LBREG): Define.
(get_allreg): Change to new defines. Fallback to abort().
2011-02-14 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c: Add whitespace/parenthesis where needed.
2011-02-14 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_LoopSetup_0): Return when reg is greater
than 7.
2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure: Regenerate.
2011-02-13 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg.
2011-02-13 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1. Output
dregs only when P is set, and dregs_lo otherwise.
2011-02-13 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code.
2011-02-12 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT.
2011-02-12 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (machine_registers): Delete REG_GP.
(reg_names): Delete "GP".
(decode_allregs): Change REG_GP to REG_LASTREG.
2011-02-12 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2,
M_IH, M_IU): Delete.
2011-02-11 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (reg_names): Add const.
(decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte,
decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs,
decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits,
decode_counters, decode_allregs): Likewise.
2011-02-09 Michael Snyder <msnyder@vmware.com>
* i386-dis.c (OP_J): Parenthesize expression to prevent
truncated addresses.
(print_insn): Fix indentation off-by-one.
2011-02-01 Nick Clifton <nickc@redhat.com>
* po/da.po: Updated Danish translation.
2011-01-21 Dave Murphy <davem@devkitpro.org>
* ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.
2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (sIbT): New.
(b_T_mode): Likewise.
(dis386): Replace sIb with sIbT on "pushT".
(x86_64_table): Replace sIb with Ib on "aam" and "aad".
(OP_sI): Handle b_T_mode. Properly sign-extend byte.
2011-01-18 Jan Kratochvil <jan.kratochvil@redhat.com>
* i386-init.h: Regenerated.
* i386-tbl.h: Regenerated
2011-01-17 Quentin Neill <quentin.neill@amd.com>
* i386-dis.c (REG_XOP_TBM_01): New.
(REG_XOP_TBM_02): New.
(reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
(xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
entries, and add bextr instruction.
* i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
(cpu_flags): Add CpuTBM.
* i386-opc.h (CpuTBM) New.
(i386_cpu_flags): Add bit cputbm.
* i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
blcs, blsfill, blsic, t1mskc, and tzmsk.
2011-01-12 DJ Delorie <dj@redhat.com>
* rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.
2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
* mips-dis.c (print_insn_args): Adjust the value to print the real
offset for "+c" argument.
2011-01-10 Nick Clifton <nickc@redhat.com>
* po/da.po: Updated Danish translation.
2011-01-05 Nathan Sidwell <nathan@codesourcery.com>
* arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.
2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REG_VEX_38F3): New.
(PREFIX_0FBC): Likewise.
(PREFIX_VEX_38F2): Likewise.
(PREFIX_VEX_38F3_REG_1): Likewise.
(PREFIX_VEX_38F3_REG_2): Likewise.
(PREFIX_VEX_38F3_REG_3): Likewise.
(PREFIX_VEX_38F7): Likewise.
(VEX_LEN_38F2_P_0): Likewise.
(VEX_LEN_38F3_R_1_P_0): Likewise.
(VEX_LEN_38F3_R_2_P_0): Likewise.
(VEX_LEN_38F3_R_3_P_0): Likewise.
(VEX_LEN_38F7_P_0): Likewise.
(dis386_twobyte): Use PREFIX_0FBC.
(reg_table): Add REG_VEX_38F3.
(prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2,
PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2,
PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7.
(vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and
PREFIX_VEX_38F7.
(vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0,
VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and
VEX_LEN_38F7_P_0.
* i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS.
(cpu_flags): Add CpuBMI.
* i386-opc.h (CpuBMI): New.
(i386_cpu_flags): Add cpubmi.
* i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (VexGdq): New.
(OP_VEX): Handle dq_mode.
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright to 2011.
For older changes see ChangeLog-2010
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
Go to most recent revision | Compare with Previous | Blame | View Log