Subversion Repositories open8_urisc

2011-06-03  Nick Clifton  <nickc@redhat.com>

        PR binutils/12752
        * arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
        computing address offsets.
        (print_arm_address): Likewise.
        (print_insn_arm): Likewise.
        (print_insn_thumb16): Likewise.
        (print_insn_thumb32): Likewise.

2011-06-02  Jie Zhang <jie@codesourcery.com>
            Nathan Sidwell <nathan@codesourcery.com>
            Maciej Rozycki <macro@codesourcery.com>

        * arm-dis.c (print_insn_coprocessor): Explicitly print #-0
        as address offset.
        (print_arm_address): Likewise. Elide positive #0 appropriately.
        (print_insn_arm): Likewise.

2011-06-02  Nick Clifton  <nickc@redhat.com>

        PR gas/12752
        * arm-dis.c (print_insn_thumb32): Do not sign extend  addresses
        passed to print_address_func.

2011-06-02  Nick Clifton  <nickc@redhat.com>

        * arm-dis.c: Fix spelling mistakes.
        * op/opcodes.pot: Regenerate.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * s390-opc.c: Replace S390_OPERAND_REG_EVEN with
        S390_OPERAND_REG_PAIR.  Fix INSTR_RRF_0UFEF instruction type.
        * s390-opc.txt: Fix cxr instruction type.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * s390-opc.c: Add new instruction types marking register pair
        operands.
        * s390-opc.txt: Match instructions having register pair operands
        to the new instruction types.

2011-05-19  Nick Clifton  <nickc@redhat.com>

        * v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
        operands.

2011-05-10  Quentin Neill  <quentin.neill@amd.com>

        * i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
        * i386-init.h: Regenerated.

2011-04-27  Nick Clifton  <nickc@redhat.com>

        * po/da.po: Updated Danish translation.

2011-04-26  Anton Blanchard  <anton@samba.org>

        * ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.

2011-04-21  DJ Delorie  <dj@redhat.com>

        * rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
        * rx-decode.c: Regenerate.

2011-04-20  H.J. Lu  <hongjiu.lu@intel.com>

        * i386-init.h: Regenerated.

2011-04-19  Quentin Neill  <quentin.neill@amd.com>

        * i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
        from bdver1 flags.

2011-04-13  Nick Clifton  <nickc@redhat.com>

        * v850-dis.c (disassemble): Always print a closing square brace if
        an opening square brace was printed.

2011-04-12  Nick Clifton  <nickc@redhat.com>

        PR binutils/12534
        * arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
        patterns.
        (print_insn_thumb32): Handle %L.

2011-04-11  Julian Brown  <julian@codesourcery.com>

        * arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
        (print_insn_thumb32): Add APSR bitmask support.

2011-04-07  Paul Carroll<pcarroll@codesourcery.com>

        * arm-dis.c (print_insn): init vars moved into private_data structure.

2011-03-24  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.

2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

        * avr-dis.c (avr_operand): Add opcode_str parameter. Check for
        post-increment to support LPM Z+ instruction. Add support for 'E'
        constraint for DES instruction.
        (print_insn_avr): Adjust calls to avr_operand. Rename variable.

2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>

        * arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.

2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>

        * arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
        Use branch types instead.
        (print_insn): Likewise.

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

        * mips-opc.c (mips_builtin_opcodes): Correct register use
        annotation of "alnv.ps".

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

        * mips-opc.c (mips_builtin_opcodes): Add "pref" macro.

2011-02-22  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.

2011-02-22  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.

2011-02-19  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (saved_state): Mark static.  Change a[01]x to ax[] and
        a[01]w to aw[].  Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
        av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
        exception, end_of_registers, msize, memory, bfd_mach.
        (CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
        LB0REG, LC1REG, LT1REG, LB1REG): Delete
        (AXREG, AWREG, LCREG, LTREG, LBREG): Define.
        (get_allreg): Change to new defines.  Fallback to abort().

2011-02-14  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c: Add whitespace/parenthesis where needed.

2011-02-14  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (decode_LoopSetup_0): Return when reg is greater
        than 7.

2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * configure: Regenerate.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1.  Output
        dregs only when P is set, and dregs_lo otherwise.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (machine_registers): Delete REG_GP.
        (reg_names): Delete "GP".
        (decode_allregs): Change REG_GP to REG_LASTREG.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2,
        M_IH, M_IU): Delete.

2011-02-11  Mike Frysinger  <vapier@gentoo.org>

        * bfin-dis.c (reg_names): Add const.
        (decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte,
        decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs,
        decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits,
        decode_counters, decode_allregs): Likewise.

2011-02-09  Michael Snyder  <msnyder@vmware.com>

        * i386-dis.c (OP_J): Parenthesize expression to prevent 
        truncated addresses.
        (print_insn): Fix indentation off-by-one.

2011-02-01  Nick Clifton  <nickc@redhat.com>

        * po/da.po: Updated Danish translation.

2011-01-21  Dave Murphy  <davem@devkitpro.org>

        * ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.

2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

        * i386-dis.c (sIbT): New.
        (b_T_mode): Likewise.
        (dis386): Replace sIb with sIbT on "pushT".
        (x86_64_table): Replace sIb with Ib on "aam" and "aad".
        (OP_sI): Handle b_T_mode.  Properly sign-extend byte.

2011-01-18  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * i386-init.h: Regenerated.
        * i386-tbl.h: Regenerated

2011-01-17  Quentin Neill  <quentin.neill@amd.com>

        * i386-dis.c (REG_XOP_TBM_01): New.
        (REG_XOP_TBM_02): New.
        (reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
        (xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
        entries, and add bextr instruction.

        * i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
        (cpu_flags): Add CpuTBM.

        * i386-opc.h (CpuTBM) New.
        (i386_cpu_flags): Add bit cputbm.

        * i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
        blcs, blsfill, blsic, t1mskc, and tzmsk.

2011-01-12  DJ Delorie  <dj@redhat.com>

        * rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.

2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>

        * mips-dis.c (print_insn_args): Adjust the value to print the real
        offset for "+c" argument.

2011-01-10  Nick Clifton  <nickc@redhat.com>

        * po/da.po: Updated Danish translation.

2011-01-05  Nathan Sidwell  <nathan@codesourcery.com>

        * arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.

2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>

        * i386-dis.c (REG_VEX_38F3): New.
        (PREFIX_0FBC): Likewise.
        (PREFIX_VEX_38F2): Likewise.
        (PREFIX_VEX_38F3_REG_1): Likewise.
        (PREFIX_VEX_38F3_REG_2): Likewise.
        (PREFIX_VEX_38F3_REG_3): Likewise.
        (PREFIX_VEX_38F7): Likewise.
        (VEX_LEN_38F2_P_0): Likewise.
        (VEX_LEN_38F3_R_1_P_0): Likewise.
        (VEX_LEN_38F3_R_2_P_0): Likewise.
        (VEX_LEN_38F3_R_3_P_0): Likewise.
        (VEX_LEN_38F7_P_0): Likewise.
        (dis386_twobyte): Use PREFIX_0FBC.
        (reg_table): Add REG_VEX_38F3.
        (prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2,
        PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2,
        PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7.
        (vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and
        PREFIX_VEX_38F7.
        (vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0,
        VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and
        VEX_LEN_38F7_P_0.

        * i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS.
        (cpu_flags): Add CpuBMI.

        * i386-opc.h (CpuBMI): New.
        (i386_cpu_flags): Add cpubmi.

        * i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt.
        * i386-init.h: Regenerated.
        * i386-tbl.h: Likewise.

2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>

        * i386-dis.c (VexGdq): New.
        (OP_VEX): Handle dq_mode.

2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>

        * i386-gen.c (process_copyright): Update copyright to 2011.

For older changes see ChangeLog-2010

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: